Search USGS⌕ Search

Geology topics

Warren F. Agena

Publications and source records attributed to Warren F. Agena.

At least 37 records · Page 2Linked to original sources
USGS1994

Seismic character of gas hydrates on the Southeastern U.S. continental margin

Gas hydrates are stable at relatively low temperature and high pressure conditions; thus large amounts of hydrates can exist in sediments within the upper several hundred meters below the sea floor. The existence of gas hydrates has been recognized and mapped mostly on the basis of high amplitude Bottom Simulating Reflections (BSRs) which indicate only that an acoustic contrast exists at the lower boundary of the region of gas hydrate stability. Other factors such as amplitude blanking and change in reflection characteristics in sediments where a BSR would be expected, which have not been investigated in detail, are also associated with hydrated sediments and potentially disclose more information about the nature of hydratecemented sediments and the amount of hydrate present. Our research effort has focused on a detailed analysis of multichannel seismic profiles in terms of reflection character, inferred distribution of free gas underneath the BSR, estimation of elastic parameters, and spatial variation of blanking. This study indicates that continuous-looking BSRs in seismic profiles are highly segmented in detail and that the free gas underneath the hydrated sediment probably occurs as patches of gas-filled sediment having variable thickness. We also present an elastic model for various types of sediments based on seismic inversion results. The BSR from sediments of high ratio of shear to compressional velocity, estimated as about 0.52, encased in sediments whose ratios are less than 0.35 is consistent with the interpretation of gasfilled sediments underneath hydrated sediments. This model contrasts with recent results in which the BSR is explained by increased concentrations of hydrate near the base of the hydrate stability field and no underlying free gas is required.

Marine Geophysical Research↗
USGS1994

International phase of ocean drilling: Seismic Line 1 demultiplexed data, Cape Hatteras to Mid-Atlantic Ridge

Introduction This CD-ROM is part of a 39 disc collection containing the demultiplexed seismic data from a 3400 km-long multichannel seismic-reflection profile extending from Cape Hatteras, N.C., to the rift valley of the Mid-Atlantic Ridge. The data were collected in 1974 as part of the International Phase of Ocean Drilling (IPOD) which was jointly funded by the U.S. Geological Survey (USGS) and the National Science Foundation's Deep Sea Drilling Project (DSDP).

Data Series↗
USGS1993

Method of estimating the amount of in situ gas hydrates in deep marine sediments

The bulk volume of gas hydrates in marine sediments can be estimated by measuring interval velocities and amplitude blanking of hydrated zones from true amplitude processed multichannel seismic reflection data. In general, neither velocity nor amplitude information is adequate to independently estimate hydrate concentration. A method is proposed that uses amplitude blanking calibrated by interval velocity information to quantify hydrate concentrations in the Blake Ridge area of the US Atlantic continental margin. On the Blake Ridge, blanking occurs in conjunction with relatively low interval velocities. The model that best explains this relation linearly mixes two end-member sediments: hydrated and unhydrated sediment. Hydrate concentration in the hydrate end-member can be calculated from a weighted equation that uses velocity estimated from the seismic data, known properties of the pure hydrate, and porosity inferred from a velocity-porosity relationship. Amplitude blanking can be predicted as the proportions of hydrated and unhydrated sediment change across a reflection boundary. Our analysis of a small area near DSDP 533 indicates that the amount of gas hydrates is about 6% in total volume when the interval velocity is used as a criterion and about 9.5% when amplitude information is used. This compares with a calculated value of about 8% derived from the only available measurement in DSDP 533.

North Carolina, South Carolina↗
USGS1992

A method of estimating the amount of in-situ gas hydrates in deep marine sediments

The bulk volume of gas hydrate in marine sediment can be estimated by measuring interval velocities and amplitude blanking of hydrated zones from true-amplitude processed multichannel seismic reflection data. In general, neither velocity nor amplitude information is adequate to independently estimate hydrate concentration. We propose a method that uses amplitude blanking calibrated by interval-velocity information to quantify hydrate concentrations in the Blake Ridge area of the U.S. Atlantic continental margin. On the Blake Ridge, blanking occurs in conjunction with relatively low interval velocities. The model that best explains this relation linearly mixes two end-member sediments, hydrated and unhydrated sediment. Hydrate concentration in the hydrate end-member can be calculated from a weighted equation that uses velocity estimated from the seismic data, known properties of pure hydrate, and porosity inferred from a velocity/porosity relationship. Amplitude blanking can be predicted as the proportions of hydrated and unhydrated sediment change across a reflection boundary. Our analysis of a small area near DSDP 533 indicates that the amount of gas hydrates is about 6% in total volume when interval velocity is used as a criterion and about 9.5% when amplitude information is used. This compares with a calculated value of about 8% derived from the only available measurement in DSDP 533.

Open-File Report↗
USGS1990

Pre- and poststack migration of GLIMPCE reflection data

GLIMPCE deep Seismic reflection profiles across the Midcontinent Rift System beneath Lake Superior reveal a central asymmetric rift with an enormous thickness of volcanic and sedimentary rocks. True amplitude cmp-processing, poststack and prestack migration and forward modelling are used to improve images of steeply dipping faults, unconformities and other discontinuities in the deep Seismic data. With prestack migration important steeply dipping structural features of the Lake Superior data set are revealed for the first time. Improved images of high-angle normal faults, later reactivated as reverse faults, provide key structural information for understanding the evolution of the rift system. Results illustrate that structural interpretations of complex deep reflection records, such as those recorded by GLIMPCE, should always be based on migrated data. Furthermore, depth-migrated sections provide useful starting models for forward velocity modelling of seismic data.

Lake Superior↗
USGS1990

Patrick Draw field, Wyoming - 1 seismic expression of subtle strat trap in Upper Cretaceous Almond

The east flank of the Rock Springs uplift and the adjacent Wamsutter arch contain several large hydrocarbon accumulations. Among these accumulations are Patrick Draw field, which produces oil and gas from a stratigraphic trap in the Upper Cretaceous Almond formation, and Table Rock field, a faulted anticlinal trap that produces gas from multiple Tertiary, Mesozoic, and Paleozoic reservoirs. The principal petroleum reservoir in Patrick Draw field is a sandstone at the top of the Almond formation. This sandstone attains a maximum thickness of 35ft and piches out westward into relatively impervious silt-stone and shale that constitute the trapping facies. The objective of this investigation is to determine whether or not the stratigraphic trap at Patrick Draw can be detected on a 12 fold, common depth point seismic profile acquired by Forest Oil Corp. and its partners. The seismic line is 18.5 miles long and crosses Patrick Draw and Table Rock fields.

Wyoming↗