Search USGS⌕ Search

Geology topics

W. J. Nokleberg

Publications and source records attributed to W. J. Nokleberg.

At least 19 recordsLinked to original sources
USGS2012

Bedrock geology and tectonic evolution of the Wrangellia, Peninsular, and Chugach terranes along the Trans-Alaska Crustal Transect in the Chugach Mountains and southern Copper River Basin, Alaska

The Trans-Alaskan Crustal Transect in the southern Copper River Basin and Chugach Mountains traverses the margins of the Peninsular and Wrangellia terranes, and the adjacent accretionary oceanic units of the Chugach terrane to the south. The southern Wrangellia terrane margin consists of a polymetamorphosed magmatic arc complex at least in part of Pennsylvanian age (Strelna Metamorphics and metagranodiorite) and tonalitic metaplutonic rocks of the Late Jurassic Chitina magmatic arc. The southern Peninsular terrane margin is underlain by rocks of the Late Triassic (?) and Early Jurassic Talkeetna magmatic arc (Talkeetna Formation and Border Ranges ultra-mafic-mafic assemblage) on Permian or older basement rocks. The Peninsular and Wrangellia terranes are parts of a dominantly oceanic superterrane (composite Terrane II) that was amalgamated by Late Triassic time and was accreted to terranes of continental affinity north of the Denali fault system in the mid- to Late Cretaceous. The Chugach terrane in the transect area consists of three successively accreted units: (1) minor greenschist and intercalated blueschist, the schist of Liberty Creek, of unknown protolith age that was metamorphosed and probably accreted during the Early Jurassic, (2) the McHugh Complex (Late Triassic to mid-Cretaceous protolith age), a melange of mixed oceanic, volcaniclastic, and olistostromal rocks that is metamorphosed to prehnite-pumpellyite and lower greenschist facies that was accreted by middle Cretaceous time, and (3) the Upper Cretaceous Valdez Group, mainly magmatic arc-derived flysch and lesser oceanic volcanic rocks of greenschist facies that was accreted by early Paleocene time. A regional thermal event that culminated in early middle Eocene time (48–52 Ma) resulted in widespread greenschist facies metamorphism and plutonism.

Journal of Geophysical Research Solid Earth↗
USGS2012

Structural analysis of the southern Peninsular, southern Wrangellia, and northern Chugach terranes along the Trans-Alaska Crustal Transect, northern Chugach Mountains, Alaska

Structural and tectonic analysis of the southern Peninsular, southern Wrangellia, and northern Chugach terranes, along the Trans-Alaska Crustal Transect in the northern Chugach Mountains documents a long succession of Early Jurassic through Cenozoic deformational events. The deformational events are generally characterized by distinctive structural fabrics and metamorphisms. Most of the events are interpreted to be related to subduction-related accretion or terrane accretion along the Border Ranges fault system (BRFS) and companion faults, and the Contact fault system (CFS). Each period of subduction-related accretion consisted of underplating of the outboard unit beneath the adjacent inboard unit. The fabric associated with each subduction-related accretion consisted of folding, intense shearing, and local rolling of planar structures. Age and structural relationships suggest migration of the zone of subduction-related accretion from the BRFS to the north, through each accreting unit, to younger bounding thrust faults to the south. Other older and younger deformational events are also recognized and are interpreted to have formed before and after, respectively, accretions along the BRFS and CFS. The main younger deformational events are (1) early Tertiary north verging folding of portions of the northern Chugach and southern Wrangellia terranes and (2) broad folding and rotation of major and minor structures related to subduction-related accretion or terrane accretion during early and middle Tertiary oroclinal bending of Alaska.

Journal of Geophysical Research Solid Earth↗
USGS2012

Seismic reflection images of the crust of the northern part of the Chugach terrane, Alaska: Results of a survey for the Trans-Alaska Crustal Transect (TACT)

Deep crustal seismic reflection data show strong reflections from the middle and lower crust of the convergent continental margin near the eastern end of the Aleutian trench. These data were collected across the Border Ranges fault system, a major suture zone that separates the Peninsular and Chugach tectonostratigraphic terranes. The Chugach terrane consists of metamorphosed, strongly deformed flysch, subduction melange as well as blueschist- and greenschist-facies rocks. Even so, highly reflective rocks lie at great depth within or beneath this terrane. The shallow part of the seismic section (0–5 s) reveals only a few reflections, which undulate and interweave, indicating that some of them originate outside of the plane of the seismic section. Other undulating events could reveal early Cenozoic granitic plutons or antiformal stacks of rock imbricated along thrust faults. In contrast to this shallow reflection pattern, three reflection bands contain most of the events on the middle part of the seismic section (5–12 s or 12–34 km). We interpret divergent reflections within the uppermost band (5–5.5 s) as gently north dipping thrust faults, and subparallel reflections truncated at the boundaries of the upper and middle bands may image a metamorphic foliation or thrust faults. If the truncated reflections represent thrust faults, then the reflection geometry suggests that subparallel roof and floor thrust faults bound imbricated rocks, forming duplex structures. The upper and middle bands are separated by an area on the seismic section that reveals few reflections. This area correlates approximately in depth with a high velocity (7.5 km/s) layer evident in refraction models. The poorly reflective, high velocity unit might be volcanic rocks like those exposed in the structurally lowest part of the Chugach terrane. If so, then the bottom of the poorly reflective rocks indicates the base of the Chugach terrane. Rocks that cause the upper and middle reflection bands and the intervening, poorly reflective volcanic rocks may form a midcrustal shear zone that is about 10 km thick. The deepest band of subparallel reflections (30–35 km) correlates closely in depth with the top of the Wadati-Benioff zone associated with the underthrusting Pacific plate. The reflections probably stem from the decollement that separates lithospheric plates within the subduction zone. This reflection band increases abruptly in thickness, possibly indicating local underplating of subducted sediment. No events from the oceanic Moho have been recognized. Neither the Border Ranges fault system, the suture between the Chugach and Peninsular terranes, nor deep crustal layers of the Peninsular terrane are evident in these seismic reflection data.

Journal of Geophysical Research Solid Earth↗
USGS2008

Trans-Alaska Crustal Transect and continental evolution involving subduction underplating and synchronous foreland thrusting

We investigate the crustal structure and tectonic evolution of the North American continent in Alaska, where the continent has grown through magmatism, accretion, and tectonic underplating. In the 1980s and early 1990s, we conducted a geological and geophysical investigation, known as the Trans-Alaska Crustal Transect (TACT), along a 1350-km-long corridor from the Aleutian Trench to the Arctic coast. The most distinctive crustal structures and the deepest Moho along the transect are located near the Pacific and Arctic margins. Near the Pacific margin, we infer a stack of tectonically underplated oceanic layers interpreted as remnants of the extinct Kula (or Resurrection) plate. Continental Moho just north of this underplated stack is more than 55 km deep. Near the Arctic margin, the Brooks Range is underlain by large-scale duplex structures that overlie a tectonic wedge of North Slope crust and mantle. There, the Moho has been depressed to nearly 50 km depth. In contrast, the Moho of central Alaska is on average 32 km deep. In the Paleogene, tectonic underplating of Kula (or Resurrection) plate fragments overlapped in time with duplexing in the Brooks Range. Possible tectonic models linking these two regions include flat-slab subduction and an orogenic-float model. In the Neogene, the tectonics of the accreting Yakutat terrane have differed across a newly interpreted tear in the subducting Pacific oceanic lithosphere. East of the tear, Pacific oceanic lithosphere subducts steeply and alone beneath the Wrangell volcanoes, because the overlying Yakutat terrane has been left behind as underplated rocks beneath the rising St. Elias Range, in the coastal region. West of the tear, the Yakutat terrane and Pacific oceanic lithosphere subduct together at a gentle angle, and this thickened package inhibits volcanism.

Alaska↗
USGS2007

Crustal structure of the Alaska Range orogen and Denali fault along the Richardson Highway

A suite of geophysical data obtained along the Richardson Highway crosses the eastern Alaska Range and Denali fault and reveals the crustal structure of the orogen. Strong seismic reflections from within the orogen north of the Denali fault dip as steeply as 25° north and extend downward to depths between 20 and 25 km. These reflections reveal what is probably a shear zone that transects most of the crust and is part of a crustal-scale duplex structure that probably formed during the Late Cretaceous. These structures, however, appear to be relict because over the past 20 years, they have produced little or no seismicity despite the nearby Mw = 7.9 Denali fault earthquake that struck in 2002. The Denali fault is nonreflective, but we interpret modeled magnetotelluric (MT), gravity, and magnetic data to propose that the fault dips steeply to vertically. Modeling of MT data shows that aftershocks of the 2002 Denali fault earthquake occurred above a rock body that has low electrical resistivity (>10 ohm-m), which might signify the presence of fluids in the middle and lower crust.

Special Paper of the Geological Society of America↗
USGS2007

Origin of narrow terranes and adjacent major terranes occurring along the Denali fault in the Eastern and Central Alaska Range, Alaska

Several narrow terranes occur along the Denali fault in the Eastern and Central Alaska Range in Southern Alaska. These terranes are the Aurora Peak, Cottonwood Creek, Maclaren, Pingston, and Windy terranes, and a terrane of ultramafic and associated rocks. Exterior to the narrow terranes to the south is the major Wrangellia island arc composite terrane, and to the north is the major Yukon-Tanana metamorphosed continental margin terrane. Overlying mainly the northern margin of the Wrangellia composite terrane are the Kahiltna overlap assemblage to the west, and the Gravina-Nutzotin-Gambier volcanic-plutonic-sedimentary belt to the east and southeast. The various narrow terranes are interpreted as the result of translation of fragments of larger terranes during two major tectonic events: (1) Late Jurassic to mid-Cretaceous accretion of the Wrangellia island arc composite terrane (or superterrane composed of the Wrangellia, Peninsular, and Alexander terranes) and associated subduction zone complexes; and (2) starting in about the Late Cretaceous, dextral transport of the Wrangellia composite terrane along the Denali fault. These two major tectonic events caused: (1) entrapment of a lens of oceanic lithosphere along the suture belt between the Wrangellia composite terrane and the North American Craton Margin and outboard accreted terranes to form the ultramafic and mafic part of the terrane of ultra-mafic and associated rocks, (2) subsequent dextral translation along the Denali fault of the terrane of ultramafic and associated rocks, (3) dextral translation along the Denali fault of the Aurora Peak, Cottonwood Creek, and Maclaren and continental margin arc terranes from part of the Coast plutonic-metamorphic complex (Coast-North Cascade plutonic belt) in the southwest Yukon Territory or Southeastern Alaska, (4) dextral translation along the Denali fault of the Pingston passive continental margin from a locus along the North American Continental Margin, and (5) formation and dextral transport along the Denali fault of the mélange of the Windy terrane from fragments of the Gravina-Nutzotin-Gambier volcanic-plutonic-sedimentary belt and from the North American Continental Margin.

Special Paper of the Geological Society of America↗
USGS2004

Geophysical data reveal the crustal structure of the Alaska range orogen within the aftershock zone of the Mw 7.9 Denali fault earthquake

Geophysical information, including deep-crustal seismic reflection, magnetotelluric ( mt ), gravity, and magnetic data, cross the aftershock zone of the 3 November 2002 M w 7.9 Denali fault earthquake. These data and aftershock seismicity, jointly interpreted, reveal the crustal structure of the right-lateral-slip Denali fault and the eastern Alaska Range orogen, as well as the relationship between this structure and seismicity. North of the Denali fault, strong seismic reflections from within the Alaska Range orogen show features that dip as steeply as 25° north and extend downward to depths between 20 and 25 km. These reflections reveal crustal structures, probably ductile shear zones, that most likely formed during the Late Cretaceous, but these structures appear to be inactive, having produced little seismicity during the past 20 years. Furthermore, seismic reflections mainly dip north, whereas alignments in aftershock hypocenters dip south. The Denali fault is nonreflective, but modeling of mt , gravity, and magnetic data suggests that the Denali fault dips steeply to vertically. However, in an alternative structural model, the Denali fault is defined by one of the reflection bands that dips to the north and flattens into the middle crust of the Alaska Range orogen. Modeling of mt data indicates a rock body, having low electrical resistivity (>10 Ω·m), that lies mainly at depths greater than 10 km, directly beneath aftershocks of the Denali fault earthquake. The maximum depth of aftershocks along the Denali fault is 10 km. This shallow depth may arise from a higher-than-normal geothermal gradient. Alternatively, the low electrical resistivity of deep rocks along the Denali fault may be associated with fluids that have weakened the lower crust and helped determine the depth extent of the aftershock zone.

Alaska↗
USGS2002

Mesozoic and Cenozoic tectonics of the eastern and central Alaska Range: Progressive basin development and deformation in a suture zone

Analysis of late Mesozoic and Cenozoic sedimentary basins, metamorphic rocks, and major faults in the eastern and central Alaska Range documents the progressive development of a suture zone that formed as a result of collision of an island-arc assemblage (the Wrangellia composite terrane) with the former North American continental margin. New basin-analysis, structural, and geochronologic data indicate the following stages in the development of the suture zone: (1) Deposition of 3-5 km of Upper Jurassic-Upper Cretaceous marine strata (the Kahiltna assemblage) recorded the initial collision of the island-arc assemblage with the continental margin. The Kahiltna assemblage exposed in the northern Talkeetna Mountains represents a Kimmeridgian-Valanginian backarc basin that was filled by northwestward-flowing submarine-fan systems that were transporting sediment derived from Mesozoic strata of the island-arc assemblage. The Kahiltna assemblage exposed in the southern Alaska Range represents a Valanginian-Cenomanian remnant ocean basin filled by west-southwestward-flowing submarine-fan systems that were transporting sediment derived from Paleozoic continental-margin strata uplifted in the along-strike suture zone. A belt of retrograde metamorphism and a regional anticlinorium developed along the continental margin from 115 to 106 Ma, roughly coeval with the end of widespread deposition in the Kahiltna sedimentary basins. (2) Metamorphism of submarine-fan deposits of the Kahiltna basin, located near the leading edge of the island-arc assemblage, occurred at ca. 74 Ma, as determined from a new U-Pb zircon age for a synkinematic sill. Coeval with metamorphism of deposits of the Kahiltna basin in the southern part of the suture zone was development of a thrust-top basin, the Cantwell basin, in the northern part of the suture zone. Geologic mapping and compositional data suggest that the 4 km of Upper Cretaceous nonmarine and marginal marine sedimentary strata in this basin record regional subaerial uplift of the suture zone. (3) Shortening and exhumation of the suture zone peaked from 65 to 60 Ma on the basis of metamorphic and geochronologic data. In the southern part of the suture zone, submarine-fan deposits of the Kahiltna basin, which had been metamorphosed to kyanite schists at ???25 km depth and ???650 ??C, were exhumed and cooled through the biotite closure temperature (???300 ??C) by ca. 62 Ma. In the northern part of the suture zone, this time period was marked by shortening, uplift, and erosion of sedimentary strata of the Cantwell basin. (4) From 60 to 54 Ma, ???3 km of volcanic strata were deposited over deformed sedimentary strata of the Cantwell basin, and several granitic plutons (the McKinley sequence) were emplaced along the suture zone. (5) Following igneous activity, strikeslip displacement occurred from ca. 54 to 24 Ma along the Denali fault system, which had developed in the existing suture zone. Late Eocene-Oligocene strike-slip displacement resulted in the formation of several small sedimentary basins along the Denali fault system. (6) Regional transpressive shortening characterized the suture zone from ca. 24 Ma to the present. Flexural subsidence, related to regional shortening, is represented by late Eocene to Holocene nonmarine deposits of the Tanana foreland basin. Regional subsidence resulted in Miocene coal seams up to 20 m thick and well-developed lacustrine deposits. Overlying the Miocene deposits are ???1.2 km of Pliocene and Holocene conglomeratic deposits. Compositional and paleocurrent data from these younger deposits record regional Neogene uplift of the suture zone and recycling of detritus from older basins to the south that had become incorporated into the uplifted suture zone. Geologic mapping of major thrust faults along the northern and southern margins of the suture zone documents Paleozoic strata thrust over both Pliocene fluvial deposits and Quaternary glacial deposits of the Tanana basin.

Geological Society of America Bulletin↗
USGS2000

Isotopic evidence for the sources of Cretaceous and tertiary granitic rocks, east-central Alaska: Implications for the tectonic evolution of the Yukon-Tanana terrane

Magnetotelluric traverses across the southern Yukon-Tanana terrane (YTT) reveal the presence of a thick conductive layer (or layers) beneath Paleozoic crystalline rocks. These rocks have been interpreted to be flysch of probable Mesozoic age, on the basis of the occurrence of Jurassic-Cretaceous flysch in the Kahiltna assemblage and Gravina-Nutzotin belt flanking the YTT to the southwest and southeast, respectively. The Pb, Nd, Sr, and O isotopes in Cretaceous and Tertiary granitic rocks that crop out throughout the YTT were measured to determine if these rocks do in fact contain a component of flysch. Previous limited analyses indicated that the Pb isotopes of the granitic rocks could be a mixture of radiogenic Pb derived from Paleozoic crystalline rocks of the YTT with an increasing component of relatively nonradiogenic Pb with decreasing age. Our Nd, Sr, and O data, along with additional Pb isotope data, eliminate flysch as a likely source and strongly suggest that the nonradiogenic end-member was derived from mafic rocks, either directly from mantle magma or by melting of mafic crust. The lack of a sedimentary component in the granitic plutons suggests either that the plutons did not incorporate significant amounts of flysch during intrusion or that the conductive layer beneath the YTT crystalline rocks is not flysch.

Alaska↗
USGS1998

Tectonic setting of synorogenic gold deposits of the Pacific Rim

More than 420 million oz of gold were concentrated in circum-Pacific synorogenic quartz loades mainly during two periods of continental growth, one along the Gondwanan margin in the Palaeozoic and the other in the northern Pacific basin between 170 and 50 Ma. These ores have many features in common and can be grouped into a single type of lode gold deposit widespread throughout clastic sedimentary-rock dominant terranes. The auriferous veins contain only a few percent sulphide minerals, have gold:silver ratios typically greater than 1:1, show a distinct association with medium grade metamorphic rocks, and may be associated with large-scale fault zone. Ore fluids are consistently of low salinity and are CO2-rich. In the early and middle Palaeozoic in the southern Pacific basin, a single immense turbidite sequence was added to the eastern margin of Gondwanaland. Deformation of these rocks in southeastern Australia was accompanied by deposition of at least 80 million oz of gold in the Victorian sector of the Lachlan fold belt mainly during the Middle and Late Devonian. Lesser Devonian gold accumulations characterized the more northerly parts of the Gondwanan margin within the Hodgkinson-Broken River and Thomson fold belts. Additional lodes were emplaced in this flyschoid sequence in Devonian or earlier Palaeozoic times in what is now the Buller Terrane, Westland, New Zealand. Minor post-Devonian growth of Gondwanaland included terrane collision and formation of gold-bearing veins in the Permian in Australia's New England fold belt and in the Jurassic-Early Cretaceous in New Zealand's Otago schists. Collision and accretion of dozens of terranes for a 100-m.y.-long period against the western margin of North America and eastern margin of Eurasia led to widespread, lattest Jurassic to Eocene gold veining in the northern Pacific basin. In the former location, Late Jurassic and Early Cretaceous veins and related placer deposits along the western margin of the Sierra Nevada batholith have yielded more than 100 million oz of gold. Additional significant ore-forming events during the development of North America's Cordilleran orogen included those in the Klamath Mountains region, California in the Late Jurassic and Early Cretaceous; the Klondike district, Yukon by the Early Cretaceous; the Nome and Fairbanks districts, Alaska, and the Bridge River district, British Columbia in the middle Cretaceous; and the Juneau gold belt, Alaska in the Eocene. Gold-bearing veins deposited during the Late Jurassic and Early Cretaceous terrane collision that formed the present-day Russian Far East have been the source for more than 130 million oz of placer gold. The abundance of gold-bearing quartz-carbonate veins throughout the Gondwanan, North American and Eurasian continental margins suggests the migration and concentration of large fluid volumes during continental growth. Such volumes could be released during orogenic heating of hydrous silicate mineral phases within accreted marine strata. The common temporal association between gold veining and magmatism around the Pacific Rim reflects these thermal episodes. Melting of the lower thickened crust during arc formation, slab rollback and extensional tectonism, and subduction of a slab window beneath the seaward part of the forearc region can all provide the required heat for initation of the ore-forming processes.

Ore Geology Reviews↗
USGS1997

Crustal implications of bedrock geology along the Trans-Alaska Crustal Transect (TACT) in the Brooks Range, northern Alaska

Geologic mapping of the Trans-Alaska Crustal Transect (TACT) project along the Dalton Highway in northern Alaska indicates that the Endicott Mountains allochthon and the Hammond terrane compose a combined allochthon that was thrust northward at least 90 km in the Early Cretaceous. The basal thrust of the combined allochthon climbs up section in the hanging wall from a ductile shear zone in the south through lower Paleozoic rocks of the Hammond terrane and into Upper Devonian rocks of the Endicott Mountains allochthon at the Mount Doonerak antiform, culminating in Early Cretaceous shale in the northern foothills of the Brooks Range. Footwall rocks north of the Mount Doonerak antiform are everywhere parautochthonous Permian and Triassic shale of the North Slope terrane rather than Jurassic and Lower Cretaceous strata of the Colville Basin as shown in most other tectonic models of the central Brooks Range. Stratigraphic and structural relations suggest that this thrust was the basal detachment for Early Cretaceous deformation. Younger structures, such as the Tertiary Mount Doonerak antiform, deform the Early Cretaceous structures and are cored by thrusts that root at a depth of about 10 to 30 km along a deeper detachment than the Early Cretaceous detachment. The Brooks Range, therefore, exposes (1) an Early Cretaceous thin-skinned deformational belt developed during arc-continent collision and (2) a mainly Tertiary thick-skinned orogen that is probabty the northward continuation of the Rocky Mountains orogenic belt. A down-to-the-south zone of both ductile and brittle normal faulting along the southern margin of the Brooks Range probably formed in the mid-Cretaceous by extensional exhumation of the Early Cretaceous contractional deformation.

Journal of Geophysical Research B: Solid Earth↗
USGS1997

Digital shaded-relief image of Alaska

One of the most spectacular physiographic images of the conterminous United States, and the first to have been produced digitally, is that by Thelin and Pike ( USGS I-2206, 1991 ). The image is remarkable for its crispness of detail and for the natural appearance of the artificial land surface. Our goal has been to produce a shaded-relief image of Alaska that has the same look and feel as the Thelin and Pike image. The Alaskan image could have been produced at the same scale as its lower 48 counterpart (1:3,500,000). But by insetting the Aleutian Islands into the Gulf of Alaska, we were able to print the Alaska map at a larger scale (1:2,500,000) and about the same physical size as the Thelin and Pike image. Benefits of the 1:2,500,000 scale are (1) greater resolution of topographic features and (2) ease of reference to the U.S. Geological Survey (USGS) (1987) Alaska Map E and the statewide geologic map (Beikman, 1980), which are both 1:2,500,000 scale. Manually drawn, shaded-relief images of Alaska's land surface have long been available (for example, Department of the Interior, 1909; Raisz, 1948). The topography depicted on these early maps is mainly schematic. Maps showing topographic contours were first available for the entire State in 1953 (USGS, 1:250,000) (J.H. Wittmann, USGS, written commun., 1996). The Alaska Map E was initially released in 1954 in both planimetric (revised in 1973 and 1987) and shaded-relief versions (revised in 1973, 1987, and 1996); topography depicted on the shaded-relief version is based on the 1:250,000-scale USGS topographic maps. Alaska Map E was later modified to include hypsometric tinting by Raven Maps and Images (1989, revised 1993) as copyrighted versions. Other shaded-relief images were produced for The National Geographic Magazine (LaGorce, 1956; 1:3,000,000) or drawn by Harrison (1970; 1:7,500,000) for The National Atlas of the United States. Recently, the State of Alaska digitally produced a shaded-relief image of Alaska at 1:2,500,000 scale (Alaska Department of Natural Resources, 1994), using the 1,000-m digital elevation data set referred to below. An important difference between our image and these previous ones is the method of reproduction: like the Thelin and Pike (1991) image, our image is a composite of halftone images that yields sharp resolution and preserves contrast. Indeed, the first impression of many viewers is that the Alaskan image and the Thelin and Pike image are composites of satellite-generated photographs rather than an artificial rendering of a digital elevation model. A shaded-relief image represents landforms in a natural fashion; that is, a viewer perceives the image as a rendering of reality. Thus a shaded-relief image is intrinsically appealing, especially in areas of spectacular relief. In addition, even subtle physiographic features that reflect geologic structures or the type of bedrock are visible. To our knowledge, some of these Alaskan features have not been depicted before and so the image should provide earth scientists with a new "look" at fundamental geologic features of Alaska.

Alaska↗
USGS1993

Devonian volcanogenic massive sulfide deposits and occurrences, southern Yukon-Tanana Terrace, eastern Alaska Range, Alaska

A belt of volcanogenic massive sulfide deposits extends for over 150 km along the southern margin of the Yukon-Tanana terrane of the eastern Alaska Range. Located north of the Denali fault, the Yukon-Tanana terrane forms a major basement unit in east-central Alaska. The volcanogenic massive sulfide deposits are primarily in the Jarvis Creek Glacier subterrane, one of the highest structural-stratigraphic levels of the Yukon-Tanana terrane. The Jarvis Creek Glacier subterrane consists of a volcanogenic massive sulfide-bearing metavolcanic rock member and a metasedimentary rock member. The volcanogenic massive sulfide deposits and enclosing metavolcanic and metasedimentary schists exhibit two periods of regional metamorphism and penetrative deformation: an older, Early Cretaceous, amphibolite facies event and a younger, mid-Cretaceous lower greenschist facies event.From northwest to southeast, the major volcanogenic massive sulfide districts are the Bonnifield, Trident Glacier, and Delta. The Bonnifield district contains massive sulfide deposits in metavolcanic and metasedimentary rocks that are correlated with the Jarvis Creek Glacier subterrane. The 25-km-long, northwest-trending Trident Glacier district contains several occurrences consisting of massive pyrrhotite and lesser pyrite, minor chalcopyrite with or without sphalerite, and galena and arsenopyrite in south-dipping massive sulfide pods, lenses, and stringers that parallel the foliation of the enclosing schists. Host-rock protoliths were mainly andesite, dacite, rhyodacite tuffs and flows, shale, and limestone, with lesser quartz-rich keratophyre flows and tuffs, volcanic graywacke, and siltstone.The Delta district contains at least 35 deposits in an 800-km 2 area. Thirty-one of the deposits define four mineral trends, 5 to 32 km long, that are subparallel to the west-northwest-striking, southwest-dipping structures and lithologies. The deposits consist of layers and zones containing varying amounts of massive to disseminated pyrite and pyrrhotite, and lesser amounts of chalcopyrite, galena, sphalerite, and arsenopyrite. The larger deposits range between 1.0 and 12.4 million metric tons with combined grades of 5.6 percent total metal (Cu, Pb, Zn), and Ag and Au contents of 56 and 1.9 g/metric ton, respectively. Hostrock protoliths are similar to those found in the Trident Glacier district, but some of the deposits are spatially associated with diorite or gabbro sills that exhibit lower greenschist facies metamorphism and deformation.Sulfur isotope values of 26 pyrrhotite separates from the Trident Glacier district occurrences average 7.7 per mil, the mean value of seven pyrite separates is 8.1 per mil. Forty-one Delta district pyrite separates average 5.9 per mil and ranges of values of the four northwest-trending trends overlap. The relative consistency of sulfur isotope values of iron-bearing sulfides in the Trident Glacier district, and the apparent lithologic relationship of isotope values in the Delta district, may reflect original-rock sulfur isotope values. Alternatively, the 34 S-enriched values may have resulted from the addition of reduced seawater sulfate to the hydrothermal fluid. The sulfide accumulations are interpreted as kuroko-like deposits that formed along a Devonian continental margin igneous arc. Deeper level portions of the arc are exposed in structurally lower levels of the Yukon-Tanana terrane to the north and contain metamorphosed granodiorite and granite plutons of Devonian to Mississippian age. U-Pb isotope data from zircons from metavolcanic rocks hosting the sulfide bodies indicate an age of about 370 Ma. The 207 Pb/ 204 Pb ratios for sulfides from the three districts are similar and indicate lead was in part derived from first-cycle sediments that were eroded largely from Precambrian crystalline rocks. The 207 Pb/ 204 Pb ratios from feldspars in Devonian metavolcanic rocks are similar to those in sulfides and indicate incorporation of radiogenic Precambrian lead into the Devonian magmas. A Precambrian crystalline source for detritus in metasedimentary rocks is indicated by locally abundant quartzite containing approximately 2.3 Ga zircons which were derived from the Hudsonian-age block of the Canadian Shield in southern British Columbia.Cretaceous greenschist facies retrogressive metamorphism and intense penetrative deformation is indicated by reequilibration of U-Pb isotope ratios, metamorphic Rb-Sr mineral isochrons, and K-Ar biotite and muscovite ages of 110 to 115 Ma. The data indicate that the mid-Cretaceous retrogressive metamorphism and associated intense deformation occurred during the accretion of the Yukon-Tanana terrane to Alaska.

Economic Geology↗