Geology topics

Victoria E. Langenheim

Publications and source records attributed to Victoria E. Langenheim.

At least 19 recordsLinked to original sources

USGS2024

Three-dimensional hydrogeologic framework model of the Russian River watershed, California

The Russian River watershed is in northern Sonoma County and southern Mendocino County, California, in the northern part of the California Coast Ranges. The Russian River serves as a supply for agricultural irrigation and for municipal, domestic, and commercial uses. Through a cooperative agreement with the California State Water Resources Control Board and Sonoma County Water Agency, the U.S. Geological Survey has completed studies to better understand the hydrogeologic system and develop numerical hydrologic modeling tools to evaluate and aid in managing groundwater resources. This report focuses on the development of a digital three-dimensional hydrogeologic framework model of the Russian River watershed for use in groundwater resource assessment and numerical models. The digital three-dimensional hydrogeologic framework model of the Russian River watershed portrays the altitude, thickness, and extent of five hydrogeologic units. These five hydrogeologic units include (1) a basement unit, (2) the Sonoma Volcanics, (3) a consolidated sedimentary rock unit, (4) an unconsolidated sediment unit, and (5) channel alluvium. Model input data were compiled from published geologic maps, interpreted well data, and a model of the top of basement derived from gravity data. These data were used to construct surfaces that represent the upper and lower subsurface boundaries of each hydrogeologic unit. Top surfaces were created for the five hydrogeologic units and then stacked in three dimensions to create a solid-volume digital model. The digital three-dimensional hydrogeologic framework model described in this report and the corresponding data represent the generalized geometry of the subsurface geologic units; the model reproduces the input geologic data with reasonable accuracy and is consistent with previously published subsurface conceptualizations of the region. The model indicates the overall geometry of the basement within the watershed and the spatial extent, altitude, and thickness of the basin-filling units. The hydrogeologic framework model is at a scale and resolution appropriate for use as the foundation for a numerical hydrologic model of the study area.

California↗

USGS2023

Depth to basement and crustal structure of the northern Harrat Rahat volcanic field, Kingdom of Saudi Arabia, from gravity and aeromagnetic data

New gravity data reveal a prominent negative anomaly along the main vent axis of the northern Harrat Rahat volcanic field in the Kingdom of Saudi Arabia. The gravity low continues north of the volcanic field onto exposures of Proterozoic rocks, indicating that the low is caused not only by the volcanic field (and possibly underlying Cenozoic sediments), but also the underlying Proterozoic basement. An inversion of the gravity field guided by analysis of aeromagnetic data indicates (1) a broad depression of the basement surface that is deeper along the main vent axis in the eastern part and in the southwest part of the volcanic field and (2) less dense basement beneath the vent axis. Low densities within the basement most likely arise from lithologic variations in the basement, predating Cenozoic volcanism, although our analysis does not rule out small volumes of partial melt and higher temperatures or extensive fracturing at depth.

northern Harrat Rahat↗

USGS2023

Aeromagnetic map of northeastern California

Aeromagnetic surveys were conducted to improve understanding of the geology and structure in northeastern California, a region predominantly covered by Quaternary and Tertiary, mainly Neogene, volcanic rocks including Medicine Lake volcano. New aeromagnetic data are a substantial improvement over existing data and reveal structural details not resolved by older surveys. Here we show how these data (1) do not support the presence of a northwest-striking structural feature across the Modoc Plateau, (2) reveal a northeast-striking fault-bounded block of predominantly reversely magnetized material that may influence tectonism at Medicine Lake volcano, and (3) constrain possible right-lateral offsets along the Likely Fault Zone and other faults that traverse the region. The data also highlight possible extensions of mapped faults, such as those in Fall River Valley and the Tule and Lower Klamath Lake areas.

California↗

USGS2021

Geologic and geophysical maps of the Santa Maria and part of the Point Conception 30'×60' quadrangles, California

This report presents digital geologic, gravity, and aeromagnetic maps for the onshore parts of the Santa Maria and Point Conception 30'x60' quadrangles at a compilation scale of 1:100,000. The map depicts the distribution of bedrock units, surficial deposits, paleontological data, geophysical data and structural features in the Santa Maria basin and the Santa Ynez Mountains to the south, an area corresponding to 26 contiguous 7.5-minute quadrangles. The map also includes offshore faults from the Hosgri fault, a major structural feature, east to the shoreline. This new map revises and supersedes two earlier versions of the 30'x60' Santa Maria quadrangle that were produced as part of the U.S. Geological Survey’s investigations of onshore oil and gas resources of the Santa Maria province (Keller, 1995). The first map was released as a scanned black-and-white image of hand-drawn compilation (Tennyson, 1992); the second map was a digital release that is no longer available (Tennyson and others, 1995). This new map also includes the geology of the onshore part of the adjacent Point Conception 30'x60' quadrangle that encompasses the Santa Ynez Mountains of the western Transverse Ranges. The digital database also contains magnetic and gravity data for the entire region, paleontological data, and interpretation of major offshore structural features that bear on the continuity and connection of the mapped onshore structures.

California↗

USGS2021

Implementation plan for the southern Pacific Border and Sierra-Cascade Mountains provinces

Introduction The National Cooperative Geologic Mapping Program (NCGMP) is publishing a strategic plan titled Renewing the National Cooperative Geologic Mapping Program as the Nation’s Authoritative Source for Modern Geologic Knowledge (Brock and others, in press). The plan provides a vision, mission, and goals for the program during the years 2020–2030, which are: Vision .—Create an integrated, three-dimensional, digital geologic map of the United States. Mission .—Characterize, interpret, and disseminate a national geologic framework model of the Earth through geologic mapping. Goal .—Focus on geologic mapping as a core function of the U.S. Geological Survey (USGS) within the long-term vision of adequately mapping the Nation’s geologic framework in three dimensions. In order to achieve the goals outlined in the strategic plan, the NCGMP has developed an implementation plan. This plan will guide the annual review of projects carried out by USGS staff (FEDMAP) described in the plan and the development of the annual FEDMAP prospectus that will ensure the effective application of the NCGMP strategy. This publication describes the implementation plan of the NCGMP strategy for the southern Pacific Border and Sierra-Cascade Mountains provinces, as defined by Fenneman (1917, 1928, and 1946). This implementation plan focuses on the geology of California and a sliver of Nevada surrounding Lake Tahoe. The southern Pacific Border and Sierra-Cascade Mountains provinces encompass the varied landscapes of the high Sierra Nevada, the Central Valley, and Coast Ranges in northern and central California and the Peninsular Ranges, Continental Borderland, Los Angeles Basin-San Gabriel-San Bernardino valleys, western and central Transverse Ranges, and northernmost Salton Trough in southern California. Societal demands create a need for earth-science data in each of these landscapes. The broader San Francisco Bay area, Central Valley, Los Angeles-San Gabriel-San Bernardino lowlands, and the coastal lowlands that border the Peninsular Ranges are densely populated (about 30 million people) areas at high risk of natural hazards. The mountains of the Sierra Nevada, Peninsular Ranges, and Transverse Ranges, and the coast all provide numerous recreational opportunities that attract visitors from around the world, whereas previously these ranges attracted people to mine their resources. The agricultural capacity of the Central Valley is a critical resource for the Nation that is increasingly water limited. The southern. Pacific Border and Sierra-Cascade Mountains provinces, at the edge of the North American continent, were profoundly influenced by subduction zone tectonics during the Mesozoic and early Cenozoic (ongoing in northernmost California) and subsequently by the inception, development, and present activity of the San Andreas transform margin system. Although the geology of this region is the poster child of fundamental conceptual models of subduction zone complexes, forearc basins, ophiolite obductions, magmatic arcs, and suspect terranes, as well as hosting one of Earth’s most notorious continental transform faults—the San Andreas Fault—important questions that have important societal consequences remain to be answered. Most of California’s population reside in these provinces and live within 30 miles of an active fault (according to www.earthquakeauthority.com ) yet new faults continue to be discovered, highlighting the importance of deformation off the main San Andreas Fault. Bedrock, surficial, and three-dimensional (3D) geologic maps depicting stratigraphic structure and depth to crystalline basement rocks provide critical context and information for understanding fault rupture, distributed deformation, fault connectivity, and history in addition to providing crucial data that enable forecasting of shaking amplitude and length from hypothetical earthquake scenarios. The tectonic evolution of California produced not only stunning mountains, with associated hazards from landslides and active volcanoes, but also fertile valleys that make California the top agricultural producer in the country in terms of cash receipts (according to www.ers.usda.gov/faqs ). These valleys lie atop large basins that not only store groundwater but, in many cases, host oil and gas fields, contributing to the fourth highest hydrocarbon production by State in the country in 2016 (according to https://www.aei.org/carpe-diem/animated-chart-of-us-oil-production-by-state-1981-2017 ). Water is a key resource increasingly stressed by growing agricultural, industrial, and residential needs. Warmer and drier conditions have led to an increased reliance on extracting groundwater resources, whose availability and quality are dictated at the first order by the 3D spatial distribution of bedrock and Quaternary surficial deposits. Thus, assessment of this critical resource is inextricably tied to knowledge of the surficial and subsurface geologic structure and material types.

California, Nevada↗

USGS2021

Aeromagnetic map of Burney and the surrounding area, northeastern California

An aeromagnetic survey was conducted to improve understanding of the geology and structure in the area around Burney, northeastern California. The new data are a substantial improvement over existing data and reveal a prominent north northwest-trending magnetic grain that allows extension of mapped faults, delineation of plutons within the Mesozoic basement in the northern Sierra Nevada, and linear anomalies that limit the amount of strike-slip offset along various faults in the area.

California↗

USGS2021

Geologic and geophysical maps of the Newfoundland Mountains and part of the adjacent Wells 30' x 60' quadrangles, Box Elder County, Utah

The Newfoundland Mountains map area (Newfoundland Mountains and adjacent part of Wells 30' x 60' quadrangles) is located in Box Elder County, northwestern Utah. The map encompasses broad expanses of the Great Salt Lake Desert as well as several picturesque mountain ranges (figures 1, 2, and 3). The geology of the area was last mapped and summarized by Doelling (1980). Since that landmark study, much of the area has been mapped in greater detail and new paleontologic, geochronologic, and structural data provide for an updated view of the geology. In addition, new geophysical studies (Langenheim and others, 2013; Langenheim, 2016) provide key data for improved interpretation of subsurface geology. The geologic map (plate 1) was compiled from fifteen 7.5' quadrangles mapped at a scale of 1:24,000 (mostly in the western part of the area), one map covering the Newfoundland Mountains at a scale of 1:31,680 (Allmendinger and Jordan, 1989), unpublished geologic mapping at scales from 1:24,000 to 1:50,000 (most by Miller; Bovine Mountain by T.E. Jordan), and reconnaissance mapping and aerial photo interpretation in intervening areas by Miller. Some published maps were remapped or reinterpreted by the authors in light of more recent studies north of the map area. Geologic mapping conducted as part of several theses/dissertations and a few published papers also were used (plate 2, index to geologic mapping). Concealed faults under valley bottoms were interpreted from gravity and aeromagnetic data. Our approach for this map was to integrate across the main themes of the mapped geology by generalizing units, structures, and polygons. This has the aim of illustrating the principal tectonic and stratigraphic packages, as well as illustrating the patterns of surficial units and geomorphology. Cross sections (plate 2) were constructed to coincide with representative cross sections for several detailed geologic maps. This approach required large bends across valleys. Basin geometry shown in the cross sections was constrained by gravity data and a seismic line since few deep drill holes are available.

Utah↗

USGS2020

Geologic map and borehole stratigraphy of Hinkley Valley and vicinity, San Bernardino County, California

Hinkley Valley, in the central to western Mojave Desert of southeastern California, has a long historical record owing to its position as a crossroads for rail and road traffic and its position adjacent to the Mojave River. Subflow in the Mojave River provided groundwater recharge that maintained water consumption and demand by way of shallow wells for local agriculture in the valley. Its crossroads position led to construction of several power-transmission lines, pipeline, and communications cable routes that transect Hinkley Valley. One of these, a natural gas pipeline and its associated compressor station, was the locus of hexavalent chromium, Cr(VI), released into, and consequent contamination of, groundwater. Understanding the movement and fate of the contaminants is a complex hydrologic and geochemical problem. Geologic mapping of the Hinkley Valley area provides framework elements for use in resolving this problem. This report provides new information on surface and subsurface geology to better constrain the origin and geometry of hydrologically important deposits in the Hinkley Valley area and describes youthful faults that may control sediment distribution and groundwater flow. The geologic map (sheet 1) presents substantial new information on surficial geology, including Pliocene deposits, but does not contain significant new work on bedrock. Bedrock investigations were specific to identifying youthful faults and representative outcrops for rocks that were penetrated by boreholes in the valley. Special attention was placed on locating and describing youthful faults. In addition, we analyzed gravity data to (1) map horizontal gradients that we interpret to reflect long-term fault traces and to (2) estimate the depth to bedrock, which is defined as Miocene and older intrusive and metamorphic rocks for the purposes of this report. The subsurface geology of Hinkley Valley was investigated by examining borehole sediment cores and rock encountered at the base of the sediment section. We analyzed the core to determine depositional environments, provenance, and age of the sediment that infilled the valley. Valleys, mountains, and basins in the Hinkley Valley area are topographically complex and incompletely named. The nearly flat floored Hinkley Valley slopes gently northward. It is framed by Mount General and the informally named “Hinkley hills” (southeast of Mount General) on the northeast and by Iron Mountain and Lynx Cat Mountain on the southwest, although breaks in the western mountains allow stream connections between Hinkley Valley and another valley to the west that is herein referred to as Hawes valley. At its south end, Hinkley Valley is traversed by the entrenched Mojave River, which passes east out of the valley past Barstow. North of Hinkley Valley, a few low hills (including Red Hill) separate the valley from a broad west-sloping piedmont that is part of the physiographic Harper Basin (of which the Harper Lake playa is the center). The lower part of this piedmont, however, is referred to as Water Valley, although it is not a distinct valley. The name derives from groundwater sourced from subflow in the Mojave River, which caused shallow water and even artesian flow in Water Valley but not in other parts of the Harper Basin. When water filled the Harper Basin to form Pleistocene Lake Harper it not only submerged Water Valley but also northern Hinkley Valley.

California↗

USGS2019

Santa Rosa's past and future earthquakes

Santa Rosa is no stranger to earthquakes. This northern California city was damaged several times in the late 19th and early 20th centuries by shaking from earthquakes, culminating in the devastating earthquake of 1906, whose rupture passed 20 miles to the west of the city on the San Andreas Fault. Then in 1969, Santa Rosa was again strongly shaken and buildings were damaged by a pair of nearby, moderate-sized earthquakes on the Rodgers Creek Fault. Since then, scientists have learned how the underlying geology increases shaking damage in Santa Rosa, have mapped where the Rodgers Creek Fault runs beneath the city, and have discovered that this fault is capable of much larger earthquakes. Following the 1969 earthquakes, Santa Rosa rose to the challenge of improving seismic safety; however, continued progress is needed to increase seismic resilience and reduce the impact of future earthquakes.

California↗

USGS2019

Crustal structure of the northern Harrat Rahat volcanic field (Saudi Arabia) from gravity and aeromagnetic data

New gravity data reveal a prominent negative anomaly along the main vent axis of the northern Harrat Rahat volcanic field in Saudi Arabia. The low continues north of the volcanic field onto exposures of Proterozoic rocks, indicating that the low is caused not only by the volcanic field (and possibly also underlying Cenozoic sediments), but also the underlying Proterozoic basement. An inversion of the gravity field guided by analysis of aeromagnetic data indicates (1) a broad depression of the basement surface that is deeper along the main vent axis in the eastern part of the harrat and in the southwest part of the volcanic field and (2) less dense basement beneath the vent axis. Low densities within the basement most likely arise from lithologic variations in the basement, predating Cenozoic volcanism, although our analysis does not rule out small volumes of partial melt and higher temperatures or extensive fracturing at depth.

Tectonophysics↗

USGS2019

Strike-slip fault interactions at Ivanpah Valley, California and Nevada

Ivanpah Valley is flanked by high mountain ranges, and represents one of the most imposing valleys of the eastern Mojave Desert. Its sinuous shape implies a complex origin as does the fact that it is not bordered by prominent range-front normal faults like valleys of the Basin and Range Province. In Addition, its deepest sedimentary basin is restricted to a small part of the valley near Nipton that does not coincide with the lowest part of the valley at Ivanpah Lake. The deep basin was caused by pull-apart at the intersection of two major strike-slip faults, the Stateline and Nipton faults. The northern part of the valley, in Nevada, probably resulted from normal faulting, and much of the normal faulting may have predated the strike-slip faulting. The southern valley, in California, is underlain by bedrock at shallow depths and is of uncertain origin. The dextral Stateline fault terminates at the sinistral Nipton fault, indicating that eastern California shear zone tectonics in this area consists of interwoven synthetic and antithetic faults, rather than through-going strike slip faults of a single orientation.

California, Nevada↗

USGS2018

Middle Pleistocene infill of Hinkley Valley by Mojave River sediment and associated lake sediment: Depositional architecture and deformation by strike-slip faults

Hinkley Valley in the Mojave Desert, near Barstow about 140 km northeast of Los Angeles and midway between Victorville Valley and the Lake Manix basin, contains a thick sedimentary sequence delivered by the Mojave River. Our study of sediment cores drilled in the valley indicates that Hinkley Valley was probably a closed playa basin with stream inflow from four directions prior to Mojave River inflow. The Mojave River deposited thick and laterally extensive clastic wedges originating from the southern valley that rapidly filled much of Hinkley Valley. Sedimentary facies representing braided stream, wetland, delta, and lacustrine depositional environments all are found in the basin fill; in some places, the sequence is greater than 74 m (245 ft) thick. The sediment is dated in part by the presence of the ~631 ka Lava Creek B ash bed low in the section, and thus represents sediment deposition after Victorville basin was overtopped by sediment and before the Manix basin began to be filled. Evidently, upstream Victorville basin filled with sediment by about 650 ka, causing the ancestral Mojave River to spill to the Harper and Hinkley basins, and later to Manix basin. Initial river sediment overran wetland deposits in many places in southern Hinkley Valley, indicating a rapidly encroaching river system. These sediments were succeeded by a widespread lake (“blue” clay) that includes the Lava Creek B ash bed. Above the lake sediment lies a thick section of interlayered stream sediment, delta and nearshore lake sediment, mudflat and/or playa sediment, and minor lake sediment. This stratigraphic architecture is found throughout the valley, and positions of lake sediment layers indicate a successive northward progression in the closed basin. A thin overlapping sequence at the north end of the valley contains evidence for a younger late Pleistocene lake episode. This late lake episode, and bracketing braided stream deposits of the Mojave River, indicate that the river avulsed through the valley, rather than continuing toward Lake Manix, during the late Pleistocene. Two dextral strike-slip fault zones, the Lockhart and the Mt. General, fold and displace the distinctive stratigraphic units, as well as surficial late Pleistocene and Holocene deposits. The sedimentary architecture and the two fault zones provide a framework for evaluating groundwater flow in Hinkley Valley.

Conference Paper↗

USGS2017

Preliminary hydrogeologic assessment near the boundary of the Antelope Valley and El Mirage Valley groundwater basins, California

The increasing demands on groundwater for water supply in desert areas in California and the western United States have resulted in the need to better understand groundwater sources, availability, and sustainability. This is true for a 650-square-mile area that encompasses the Antelope Valley, El Mirage Valley, and Upper Mojave River Valley groundwater basins, about 50 miles northeast of Los Angeles, California, in the western part of the Mojave Desert. These basins have been adjudicated to ensure that groundwater rights are allocated according to legal judgments. In an effort to assess if the boundary between the Antelope Valley and El Mirage Valley groundwater basins could be better defined, the U.S. Geological Survey began a cooperative study in 2014 with the Mojave Water Agency to better understand the hydrogeology in the area and investigate potential controls on groundwater flow and availability, including basement topography. Recharge is sporadic and primarily from small ephemeral washes and streams that originate in the San Gabriel Mountains to the south; estimates range from about 400 to 1,940 acre-feet per year. Lateral underflow from adjacent basins has been considered minor in previous studies; underflow from the Antelope Valley to the El Mirage Valley groundwater basin has been estimated to be between 100 and 1,900 acre-feet per year. Groundwater discharge is primarily from pumping, mostly by municipal supply wells. Between October 2013 and September 2014, the municipal pumpage in the Antelope Valley and El Mirage Valley groundwater basins was reported to be about 800 and 2,080 acre-feet, respectively. This study was motivated by the results from a previously completed regional gravity study, which suggested a northeast-trending subsurface basement ridge and saddle approximately 3.5 miles west of the boundary between the Antelope Valley and El Mirage Valley groundwater basins that might influence groundwater flow. To better define potential basement structures that could affect groundwater flow between the groundwater basins in the study area, gravity data were collected using more closely spaced measurements in September 2014. Groundwater-level data was gathered and collected from March 2014 through March 2015 to determine depth to water and direction of groundwater flow. The gravity and groundwater-level data showed that the saturated thickness of the alluvium was about 2,000 feet thick to the east and about 130 feet thick above the northward-trending basement ridge near Llano, California. Although it was uncertain whether the basement ridge affects the groundwater system, a potential barrier to groundwater flow could be created if the water table fell below the altitude of the basement ridge, effectively causing the area to the west of the basement ridge to become hydraulically isolated from the area to the east. In addition, the direction of regional-groundwater flow likely will be influenced by future changes in the number and distribution of pumping wells and the thickness of the saturated alluvium from which water is withdrawn. Three-dimensional animations were created to help visualize the relation between the basins’ basement topography and the groundwater system in the area. Further studies that could help to more accurately define the basins and evaluate the groundwater-flow system include exploratory drilling of multi-depth monitoring wells; collection of depth-dependent water-quality samples; and linking together existing, but separate, groundwater-flow models from the Antelope Valley and El Mirage Valley groundwater basins into a single, calibrated groundwater-flow model.

California↗

USGS2017

Subsurface geometry of the San Andreas fault in southern California: Results from the Salton Seismic Imaging Project (SSIP) and strong ground motion expectations

The San Andreas fault (SAF) is one of the most studied strike‐slip faults in the world; yet its subsurface geometry is still uncertain in most locations. The Salton Seismic Imaging Project (SSIP) was undertaken to image the structure surrounding the SAF and also its subsurface geometry. We present SSIP studies at two locations in the Coachella Valley of the northern Salton trough. On our line 4, a fault‐crossing profile just north of the Salton Sea, sedimentary basin depth reaches 4 km southwest of the SAF. On our line 6, a fault‐crossing profile at the north end of the Coachella Valley, sedimentary basin depth is ∼ 2 – 3    km "> ∼ 2 – 3 km and centered on the central, most active trace of the SAF. Subsurface geometry of the SAF and nearby faults along these two lines is determined using a new method of seismic‐reflection imaging, combined with potential‐field studies and earthquakes. Below a 6–9 km depth range, the SAF dips ∼ 50 ° – 60 ° "> ∼ 50 ° – 60 ° NE, and above this depth range it dips more steeply. Nearby faults are also imaged in the upper 10 km, many of which dip steeply and project to mapped surface fault traces. These secondary faults may join the SAF at depths below about 10 km to form a flower‐like structure. In Appendix D , we show that rupture on a northeast‐dipping SAF, using a single plane that approximates the two dips seen in our study, produces shaking that differs from shaking calculated for the Great California ShakeOut, for which the southern SAF was modeled as vertical in most places: shorter‐period ( T < 1    s "> T < 1 s ) shaking is increased locally by up to a factor of 2 on the hanging wall and is decreased locally by up to a factor of 2 on the footwall, compared to shaking calculated for a vertical fault.

California↗

USGS2017

The Evergreen basin and the role of the Silver Creek fault in the San Andreas fault system, San Francisco Bay region, California

The Evergreen basin is a 40-km-long, 8-km-wide Cenozoic sedimentary basin that lies mostly concealed beneath the northeastern margin of the Santa Clara Valley near the south end of San Francisco Bay (California, USA). The basin is bounded on the northeast by the strike-slip Hayward fault and an approximately parallel subsurface fault that is structurally overlain by a set of west-verging reverse-oblique faults which form the present-day southeastward extension of the Hayward fault. It is bounded on the southwest by the Silver Creek fault, a largely dormant or abandoned fault that splays from the active southern Calaveras fault. We propose that the Evergreen basin formed as a strike-slip pull-apart basin in the right step from the Silver Creek fault to the Hayward fault during a time when the Silver Creek fault served as a segment of the main route by which slip was transferred from the central California San Andreas fault to the Hayward and other East Bay faults. The dimensions and shape of the Evergreen basin, together with palinspastic reconstructions of geologic and geophysical features surrounding it, suggest that during its lifetime, the Silver Creek fault transferred a significant portion of the ∼100 km of total offset accommodated by the Hayward fault, and of the 175 km of total San Andreas system offset thought to have been accommodated by the entire East Bay fault system. As shown previously, at ca. 1.5–2.5 Ma the Hayward-Calaveras connection changed from a right-step, releasing regime to a left-step, restraining regime, with the consequent effective abandonment of the Silver Creek fault. This reorganization was, perhaps, preceded by development of the previously proposed basin-bisecting Mount Misery fault, a fault that directly linked the southern end of the Hayward fault with the southern Calaveras fault during extinction of pull-apart activity. Historic seismicity indicates that slip below a depth of 5 km is mostly transferred from the Calaveras fault to the Hayward fault across the Mission seismic trend northeast of the Evergreen basin, whereas slip above a depth of 5 km is transferred through a complex zone of oblique-reverse faults along and over the northeast basin margin. However, a prominent groundwater flow barrier and related land-subsidence discontinuity coincident with the concealed Silver Creek fault, a discontinuity in the pattern of seismicity on the Calaveras fault at the Silver Creek fault intersection, and a structural sag indicative of a negative flower structure in Quaternary sediments along the southwest basin margin indicate that the Silver Creek fault has had minor ongoing slip over the past few hundred thousand years. Two earthquakes with ∼M6 occurred in A.D. 1903 in the vicinity of the Silver Creek fault, but the available information is not sufficient to reliably identify them as Silver Creek fault events.

California↗

USGS2017

Buried shallow fault slip from the South Napa earthquake revealed by near-field geodesy

Earthquake-related fault slip in the upper hundreds of meters of Earth’s surface has remained largely unstudied because of challenges measuring deformation in the near field of a fault rupture. We analyze centimeter-scale accuracy mobile laser scanning (MLS) data of deformed vine rows within ±300 m of the principal surface expression of the M (magnitude) 6.0 2014 South Napa earthquake. Rather than assuming surface displacement equivalence to fault slip, we invert the near-field data with a model that allows for, but does not require, the fault to be buried below the surface. The inversion maps the position on a preexisting fault plane of a slip front that terminates ~3 to 25 m below the surface coseismically and within a few hours postseismically. The lack of surface-breaching fault slip is verified by two trenches. We estimate near-surface slip ranging from ~0.5 to 1.25 m. Surface displacement can underestimate fault slip by as much as 30%. This implies that similar biases could be present in short-term geologic slip rates used in seismic hazard analyses. Along strike and downdip, we find deficits in slip: The along-strike deficit is erased after ~1 month by afterslip. We find no evidence of off-fault deformation and conclude that the downdip shallow slip deficit for this event is likely an artifact. As near-field geodetic data rapidly proliferate and will become commonplace, we suggest that analyses of near-surface fault rupture should also use more sophisticated mechanical models and subsurface geomechanical tests.

California↗

USGS2017

Connecting the Soda–Avawatz and Bristol–Granite Mountains faults with gravity andaeromagnetic data, Mojave Desert, California

The Soda–Avawatz and Bristol–Granite Mountains faults are considered by some to form the northeastern margin of the eastern California shear zone yet their connectivity and extents are obscured by surficial deposits and the estimates of total right-lateral offset from geologic data range from 0 to as much as 24 km. We use gravity and recently released detailed aeromagnetic data to map strands of these faults, examine structure within the fault zones and provide estimates of right-lateral offset. Gradients in gravity and aeromagnetic data define physical property contrasts that coincide with mapped strands of the faults and allow for extension of these faults, where concealed, to indicate continuity between the Soda–Avawatz and Bristol–Granite Mountains faults. Gravity data reveal local tectonic basins west of Silver Lake, beneath Soda Lake, and southwest of the Marble Mountains that are approximately 9–15 km long, 3–5 km wide, and 1–1.5 km deep. The basins are located where the local fault traces strike more northerly than the overall fault zone strike, suggesting that these basins are transtensional (pull-apart). If the lengths of these basins can be used as a proxy for rightlateral offset, the Soda–Avawatz and Bristol–Granite Mountains faults may have up to 9–15 km of post-early Miocene offset, consistent with our offset estimates from correlative magnetic anomalies across the fault zone.

California↗

USGS2016

Geologic structure of the Yucaipa area inferred from gravity data, San Bernardino and Riverside Counties, California

In the spring of 2009, the U.S. Geological Survey, in cooperation with the San Bernardino Valley Municipal Water District, began working on a gravity survey in the Yucaipa area to explore the three-dimensional shape of the sedimentary fill (alluvial deposits) and the surface of the underlying crystalline basement rocks. As water use has increased in pace with rapid urbanization, water managers have need for better information about the subsurface geometry and the boundaries of groundwater subbasins in the Yucaipa area. The large density contrast between alluvial deposits and the crystalline basement complex permits using modeling of gravity data to estimate the thickness of alluvial deposits. The bottom of the alluvial deposits is considered to be the top of crystalline basement rocks. The gravity data, integrated with geologic information from surface outcrops and 51 subsurface borings (15 of which penetrated basement rock), indicated a complex basin configuration where steep slopes coincide with mapped faults―such as the Crafton Hills Fault and the eastern section of the Banning Fault―and concealed ridges separate hydrologically defined subbasins. Gravity measurements and well logs were the primary data sets used to define the thickness and structure of the groundwater basin. Gravity measurements were collected at 256 new locations along profiles that totaled approximately 104.6 km (65 mi) in length; these data supplemented previously collected gravity measurements. Gravity data were reduced to isostatic anomalies and separated into an anomaly field representing the valley fill. The ‘valley-fill-deposits gravity anomaly’ was converted to thickness by using an assumed, depth-varying density contrast between the alluvial deposits and the underlying bedrock. To help visualize the basin geometry, an animation of the elevation of the top of the basement-rocks was prepared. The animation “flies over” the Yucaipa groundwater basin, viewing the land surface, geology, faults, and ridges and valleys of the shaded-relief elevation of the top of the basement complex.

California↗