Geology topics

Ulrich Kueppers

Publications and source records attributed to Ulrich Kueppers.

10 recordsLinked to original sources

USGS2026

PDCD-DAT: A global database of pyroclastic density current deposit field data

Pyroclastic density currents represent one of the deadliest hazards posed by active volcanoes. Analysis of their deposits provides valuable insights into their internal dynamics and informs numerical simulations of pyroclastic density currents which underpin many volcanic hazard assessments. We present PDCD-DAT, a global database of pyroclastic density current deposit characteristics compiled from peer-reviewed literature. The database includes both quantitative datasets (e.g., grain size, density, bedform dimensions, thickness) and qualitative descriptors (e.g., sedimentary structures, lithofacies). PDCD-DAT includes data from 85 source publications, covering 97 eruptions or eruptive phases, and 214 individual depositional units from 55 globally distributed volcanoes. Eruptions recorded in the database range from VEI 1–8. We highlight examples of potential applications of the database, which include (i) comparison of single deposit case studies to global datasets, (ii) informing input parameters and conditions for numerical and analogue models of pyroclastic density currents, (iii) validation of numerical and analogue models against a wide variety of natural case study deposit architectures, and (iv) estimating hazard impact metrics of pyroclastic density currents from past eruptions. We show that the database represents a useful tool for improving our ability to model pyroclastic density currents, predict their associated hazards, and understand the relationships between the internal dynamics of pyroclastic density currents and the properties of their deposits. PDCD-DAT is integrated with the FlowDat Mass Flow Database, which provides a sustainable platform for the database. We aim for PDCD-DAT to be expanded in the future through addition of pyroclastic density current deposit datasets from new field studies conducted by the volcanology research community.

Journal of Applied Volcanology↗

USGS2025

The morphological response to the 13 May 2022 major explosive event at Stromboli volcano, Italy, characterised by high-resolution UAS surveys

Since 2019, the frequency of major explosive eruptions at Stromboli volcano (Italy) has increased, heightening the exposure of population and scientists to the hazards posed by ejecta. Morphological changes can directly alter the hazard potential associated with these phenomena. Here, we present a quantitative morphological analysis of changes of the crater terrace area linked to the 13 May 2022 major explosive event. High resolution (2.5 cm pixel -1 ) aerial imagery was acquired by unoccupied aircraft systems 2 hours before and 19 hours after the event. The 13 May 2022 major explosive event consisted of a minimum of seven explosions from four vents located in the south-central crater area. The opportune timing of this campaign enabled the quantification of morphological changes at Stromboli related to a single major explosive event at high temporal and spatial resolution. A total of 12.7 × 10 3 m 3 was excavated and 5.5 × 10 3 m 3 deposited. Via the mapping and classification of bomb distributions we observe that angular blocks make up the largest fraction of ballistics >0.2 m, from which we infer a strong interaction with wall rock and/or fragmentation of solidified plugs in the shallow plumbing system. The morphological changes observed provide valuable constraints on how much material is displaced, and the shift in location and the number of active vents during major explosive events at Stromboli.

Stromboli volcano↗

USGS2023

UAS-Based Observations of Infrasound Directionality at Stromboli Volcano, Italy

Infrasound (low frequency sound waves) can be used to monitor and characterize volcanic eruptions. However, infrasound sensors are usually placed on the ground, thus providing a limited sampling of the acoustic radiation pattern that can bias source size estimates. We present observations of explosive eruptions from a novel uncrewed aircraft system (UAS)-based infrasound sensor platform that was strategically hovered near the active vents of Stromboli volcano, Italy. We captured eruption infrasound from short-duration explosions and jetting events. While potential vertical directionality was inconclusive for the short-duration explosion, we find that jetting events exhibit vertical sound directionality that was observed with a UAS close to vertical. This directionality would not have been observed using only traditional deployments of ground-based infrasound sensors, but is consistent with jet noise theory. This proof-of-concept study provides unique information that can improve our ability to characterize and quantify the directionality of volcanic eruptions and their associated hazards.

Stromboli Volcano↗

USGS2022

Lava fountain jet noise during the 2018 eruption of fissure 8 of Kīlauea volcano

Real-time monitoring is crucial to assess hazards and mitigate risks of sustained volcanic eruptions that last hours to months or more. Sustained eruptions have been shown to produce a low frequency (infrasonic) form of jet noise. We analyze the lava fountaining at fissure 8 during the 2018 Lower East Rift Zone eruption of Kīlauea volcano, Hawaii, and connect changes in fountain properties with recorded infrasound signals from an array about 500 m from the fountain using jet noise scaling laws and visual imagery. Video footage from the eruption reveals a change in lava fountain dynamics from a tall, distinct fountain at the beginning of June to a low fountain with a turbulent, out-pouring lava pond surrounded by a tephra cone by mid-June. During mid-June, the sound pressure level reaches a maximum, and peak frequency drops. We develop a model that uses jet noise scaling relationships to estimate changes in volcanic jet diameter and jet velocity from infrasound sound pressure levels and peak frequencies. The results of this model indicate a decrease in velocity in mid-June which coincides with the decrease in fountain height. Furthermore, the model results suggest an increase in jet diameter, which can be explained by the larger width of the fountain that resembles a turbulent lava pond compared to the distinct fountain at the beginning of June. The agreement between the infrasound-derived and visually observed changes in fountain dynamics suggests that jet noise scaling relationships can be used to monitor lava fountain dynamics using infrasound recordings.

Hawaii↗

USGS2021

Assessing the biological reactivity of organic compounds on volcanic ash: Implications for human health hazard

Exposure to volcanic ash is a long-standing health concern for people living near active volcanoes and in distal urban areas. During transport and deposition, ash is subjected to various physicochemical processes that may change its surface composition and, consequently, bioreactivity. One such process is the interaction with anthropogenic pollutants; however, the potential for adsorbed, deleterious organic compounds to directly impact human health is unknown. We use an in vitro bioanalytical approach to screen for the presence of organic compounds of toxicological concern on ash surfaces and assess their biological potency. These compounds include polycyclic aromatic hydrocarbons (PAHs), polychlorinated dibenzo- p -dioxins and dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (dlPCBs). Analysis of ash collected in or near urbanised areas at five active volcanoes across the world (Etna, Italy; Fuego, Guatemala; Kelud, Indonesia; Sakurajima, Japan; Tungurahua, Ecuador) using the bioassay inferred the presence of such compounds on all samples. A relatively low response to PCDD/Fs and the absence of a dlPCBs response in the bioassay suggest that the measured activity is dominated by PAHs and PAH-like compounds. This study is the first to demonstrate a biological potency of organic pollutants associated with volcanic ash particles. According to our estimations, they are present in quantities below recommended exposure limits and likely pose a low direct concern for human health.

Bulletin of Volcanology↗

USGS2021

Patterns of bubble bursting and weak explosive activity in an active lava lake—Halema‘uma‘u, Kīlauea, 2015

The rise of the Halemaʻumaʻu lava lake in 2013–2018 to depths commonly 40 meters or less below the rim of the vent was an excellent opportunity to study outgassing and the link to associated eruptive activity. We use videography to investigate the rise and bursting of bubbles through the free surface of the lake in 2015. We focus on low-energy explosive activity (spattering) in which the ascent and bursting of meter-sized, mechanically decoupled bubbles trigger the ejection of fluidal bombs to tens of meters above the free surface. A decay in initial pyroclast velocity with time follows the same functional form as that observed for ejecta at Stromboli (Italy), suggesting a similar bubble-burst mechanism. We also find that the upward velocity of the bubble crust as it bursts is around 2.5 times higher than the velocity of the bubble as it rises through the lake surface, indicating that the bubbles are over-pressurized. Prior to bursting, bubbles emerge at velocities of 4 to 14 meters per second, suggesting rise from depths of at least tens of meters but unaffected by the deeper circulation of the lava lake. We identify three styles of bubble bursting: (1) isolated, widely spaced, single bursts, (2) recurring clusters of discrete bubbles, and (3) prolonged episodes of overlapping bubble bursts along elongate narrow sources typically parallel to the margins of the lava lake. We call these styles of bursting isolated events, clusters, and prolonged episodes, respectively. The frequency of bubble bursting and the mass fluxes of gas and pyroclasts increase from styles 1 to 3. The intensity (mass eruption rate) for single bubble bursts ranges from 280 to 3,500 kilograms per second. The total erupted mass of pyroclasts for a single burst is <4,000 kilograms (kg) and for a single well-constrained prolonged episode is about 10 7 kg. These numbers place the observed spattering at the lowest end of basaltic explosivity in terms of erupted mass (that is, magnitude). Most ejecta fell back into the crater; only strands of Pele’s hair rose to heights where they could be advected downwind from the vent. Collectively, the explosive activity accompanying the three styles of bubble bursting spans from impulsive, transient eruptive behaviors to sustained discharge; this shift represents progressively higher frequency and intensity of bubble bursting.

Hawaii↗

USGS2020

Aeolian remobilisation of volcanic ash: Outcomes of a workshop in the Argentinian Patagonia

During explosive volcanic eruptions, large quantities of tephra can be dispersed and deposited over wide areas. Following deposition, subsequent aeolian remobilisation of ash can potentially exacerbate primary impacts on timescales of months to millennia. Recent ash remobilisation events (e.g., following eruptions of Cordón Caulle 2011; Chile, and Eyjafjallajökull 2010, Iceland) have highlighted this to be a recurring phenomenon with consequences for human health, economic sectors, and critical infrastructure. Consequently, scientists from observatories and Volcanic Ash Advisory Centers (VAACs), as well as researchers from fields including volcanology, aeolian processes and soil sciences, convened at the San Carlos de Bariloche headquarters of the Argentinian National Institute of Agricultural Technology to discuss the “state of the art” for field studies of remobilised deposits as well as monitoring, modeling and understanding ash remobilisation. In this article, we identify practices for field characterisation of deposits and active processes, including mapping, particle characterisation and sediment traps. Furthermore, since forecast models currently rely on poorly-constrained dust emission schemes, we call for laboratory and field measurements to better parameterise the flux of volcanic ash as a function of friction velocity. While source area location and extent are currently the primary inputs for dispersion models, once emission schemes become more sophisticated and better constrained, other parameters will also become important (e.g., source material volume and properties, effective precipitation, type and distribution of vegetation cover, friction velocity). Thus, aeolian ash remobilisation hazard and associated impact assessment require systematic monitoring, including the development of a regularly-updated spatial database of resuspension source areas.

Frontiers in Earth Science↗

USGS2018

Volcanic ash activates the NLRP3 inflammasome in murine and human macrophages

Volcanic ash is a heterogeneous mineral dust that is typically composed of a mixture of amorphous (glass) and crystalline (mineral) fragments. It commonly contains an abundance of the crystalline silica (SiO 2 ) polymorph cristobalite. Inhalation of crystalline silica can induce inflammation by stimulating the NLRP3 inflammasome, a cytosolic receptor complex that plays a critical role in driving inflammatory immune responses. Ingested material results in the assembly of NLRP3, ASC, and caspase-1 with subsequent secretion of the interleukin-1 family cytokine IL-1β. Previous toxicology work suggests that cristobalite-bearing volcanic ash is minimally reactive, calling into question the reactivity of volcanically derived crystalline silica, in general. In this study, we target the NLRP3 inflammasome as a crystalline silica responsive element to clarify volcanic cristobalite reactivity. We expose immortalized bone marrow-derived macrophages of genetically engineered mice and primary human peripheral blood mononuclear cells (PBMCs) to ash from the Soufrière Hills volcano as well as representative, pure-phase samples of its primary componentry (volcanic glass, feldspar, cristobalite) and measure NLRP3 inflammasome activation. We demonstrate that respirable Soufrière Hills volcanic ash induces the activation of caspase-1 with subsequent release of mature IL-1β in a NLRP3 inflammasome-dependent manner. Macrophages deficient in NLRP3 inflammasome components are incapable of secreting IL-1β in response to volcanic ash ingestion. Cellular uptake induces lysosomal destabilization involving cysteine proteases. Furthermore, the response involves activation of mitochondrial stress pathways leading to the generation of reactive oxygen species. Considering ash componentry, cristobalite is the most reactive pure-phase with other components inducing only low-level IL-1β secretion. Inflammasome activation mediated by inhaled ash and its potential relevance in chronic pulmonary disease was further evidenced in PBMC using the NLRP3 small-molecule inhibitor CP-456,773 (CRID3, MCC950). Our data indicate the functional activation of the NLRP3 inflammasome by volcanic ash in murine and human macrophages in vitro . Cristobalite is identified as the apparent driver, thereby contesting previous assertions that chemical and structural imperfections may be sufficient to abrogate the reactivity of volcanically derived cristobalite. This is a novel mechanism for the stimulation of a pro-inflammatory response by volcanic particulate and provides new insight regarding chronic exposure to environmentally occurring particles.

Frontiers in Immunology↗

USGS2017

Volcanic ash supports a diverse bacterial community in a marine mesocosm

Shallow-water coral reef ecosystems, particularly those already impaired by anthropogenic pressures, may be highly sensitive to disturbances from natural catastrophic events, such as volcanic eruptions. Explosive volcanic eruptions expel large quantities of silicate ash particles into the atmosphere, which can disperse across millions of square kilometres and deposit into coral reef ecosystems. Following heavy ash deposition, mass mortality of reef biota is expected, but little is known about the recovery of post-burial reef ecosystems. Reef regeneration depends partly upon the capacity of the ash deposit to be colonised by waterborne bacterial communities and may be influenced to an unknown extent by the physiochemical properties of the ash substrate itself. To determine the potential for volcanic ash to support pioneer bacterial colonisation, we exposed five well-characterised volcanic and coral reef substrates to a marine aquarium under low light conditions for 3 months: volcanic ash, synthetic volcanic glass, carbonate reef sand, calcite sand and quartz sand. Multivariate statistical analysis of Automated Ribosomal Intergenic Spacer Analysis (ARISA) fingerprinting data demonstrates clear segregation of volcanic substrates from the quartz and coral reef substrates over 3 months of bacterial colonisation. Overall bacterial diversity showed shared and substrate-specific bacterial communities; however, the volcanic ash substrate supported the most diverse bacterial community. These data suggest a significant influence of substrate properties (composition, granulometry and colour) on bacterial settlement. Our findings provide first insights into physicochemical controls on pioneer bacterial colonisation of volcanic ash and highlight the potential for volcanic ash deposits to support bacterial diversity in the aftermath of reef burial, on timescales that could permit cascading effects on larval settlement.

Geobiology↗

USGS2016

Juvenile magma recognition and eruptive dynamics inferred from the analysis of ash time series: The 2015 reawakening of Cotopaxi volcano

Forecasting future activity and performing hazard assessments during the reactivation of volcanoes remain great challenges for the volcanological community. On August 14, 2015 Cotopaxi volcano erupted for the first time in 73 years after approximately four months of precursory activity, which included an increase in seismicity, gas emissions, and minor ground deformation. Here we discuss the use of near real-time petrological monitoring of ash samples as a complementary aid to geophysical monitoring, in order to infer eruption dynamics and evaluate possible future eruptive activity at Cotopaxi. Twenty ash samples were collected between August 14 and November 23, 2015 from a monitoring site on the west flank of the volcano. These samples contain a range of grain types that we classified as: hydrothermal/altered, lithic, juvenile, and free crystals. The relative proportions of theses grains evolved as the eruption progressed, with increasing amounts of juvenile material and a decrease in hydrothermally altered material. In samples from the initial explosion, juvenile grains are glassy, microlite-poor and contain hydrothermal minerals (opal and alunite). The rising magma came in contact with the hydrothermal system under confinement, causing hydro-magmatic explosions that cleared the upper part of the plumbing system. Subsequently, the magmatic column produced a thermal aureole in the conduit and dried out the hydrothermal system, allowing for dry eruptions. Magma ascent rates were low enough to allow for efficient outgassing and microlite growth. Constant supply of magma from below caused quasi-continuous disruption of the uppermost magma volume through a combination of shear-deformation and gas expansion. The combination of increasing crystallinity of juvenile grains, and high measured SO 2 flux indicate decreasing integrated magma ascent rates and clearing of the hydrothermal system along transport pathways in a system open to gas loss. The near real-time monitoring of ash samples combined with traditional geophysical monitoring techniques during the reawakening of Cotopaxi allowed us to gain a much clearer understanding of events than when using traditional geophysical monitoring alone.

Cotopaxi volcano↗