Search USGS⌕ Search

Geology topics

Travis S.J. Gabriel

Publications and source records attributed to Travis S.J. Gabriel.

At least 19 recordsLinked to original sources

Corundum discovered by SuperCam and the Perseverance rover at Jezero crater, Mars

Mars is primarily composed of mafic mineral assemblages and their alteration products, but small, scattered rocks strewn across the landscape offer clues to greater petrological diversity. While traversing the Jezero crater rim, the Perseverance rover encountered several plagioclase-rich light-toned float rocks. SuperCam identified the distinctive signature of corundum (α-Al 2 O 3 ) in these rocks using time-resolved luminescence spectroscopy. Two strong peaks (692.7 and 694.1 nm) with millisecond lifetimes, and additional supporting lines, are consistent with Cr 3+ substitution for Al 3+ in corundum. Corundum forms in Al-rich, Si-depleted environments through magmatic or metamorphic processes. Given the rocks' small size, association with plagioclase, and location on the crater rim, we interpret the most plausible formation scenario to be impact induced metamorphism at the interface of a felsic and a mafic/ultramafic member with the likely action of fluids at some stage, although other possibilities are not excluded.

Geophysical Research Letters↗

Semantic segmentation of light-toned veins in multimodal ChemCam data

Since the Mars Science Laboratory landed in 2012, the ChemCam instrument aboard the rover has collected in-situ laser-induced breakdown spectroscopy (LIBS) data and context images along more than 35 km of the Gale Crater traverse, providing valuable observations including diagenetic features such as light-toned veins. These veins are of particular scientific interest because they are interpreted as indicators of past fluid circulation on Mars and provide insights into the evolution of habitability on Mars. Their identification, however, currently relies on manual visual inspection of Remote Micro Imager (RMI) images, a process that is time-consuming and sensitive to differences in human interpretation. To address this issue, in this paper we introduce a novel pixel-level labeled, multimodal dataset of ChemCam observations specifically tailored for vein detection, along with customized U-Net models to integrate both textural (RMI) and chemical (LIBS) modalities. To further ensure trustworthy scientific use, we incorporate the Learn-Then-Test (LTT) framework to provide statistical control of the false discovery rate without requiring model retraining. The experimental results demonstrate that the proposed customized U-Net models trained on the developed dataset, combined with risk-controlled prediction, increases the efficiency of pixel-level vein identification through automation and produces statistically reliable predictions for multimodal ChemCam data.

Scientific Reports↗

Rare earth elements on the Moon

Rare earth elements (REEs) are a scarce but vital resource for our modern economies and lifestyles. Since the late 1990s, China has supplied the vast majority of the world’s refined REEs. Increasing global demand has broadened the search for REE deposits to unconventional places, including the Moon. Although most lunar rocks have very low REE concentrations, Apollo samples showed that one type of lunar rock containing potassium (K), REEs, and phosphorus (P)—known by the acronym KREEP—has high concentrations of REEs. Data from orbiting satellites have identified locations where substantial deposits of KREEP are likely. The viability of mining these deposits depends on the evolution of REE economics, the development of the Earth-Moon infrastructure, and the findings from future lunar mineral exploration missions.

Fact Sheet↗

Python Hyperspectral Analysis Tool (PyHAT) user guide

This report is a user guide for the 0.1.2 release of the Python Hyperspectral Analysis Tool (PyHAT) and its graphical user interface (GUI). The GUI is intended to provide an intuitive front end to allow users to apply sophisticated preprocessing and analysis methods to spectroscopic data. Though the PyHAT package has been developed with a particular focus on laser-induced breakdown spectroscopy (LIBS), the package uses a simple comma separated values (CSV)-based data format and is readily applicable in other spectroscopy applications. This guide provides background information about the package and its capabilities. It also provides practical guidance on usage and example workflows for a wide variety of datasets.

Open-File Report↗

From hydrated silica to quartz: Potential hydrothermal precipitates found in Jezero crater, Mars

On Earth, silica-rich phases from opal to quartz are important indicators and tracers of geological processes. Hydrated silica, such as opal, is a particularly good matrix for the preservation of molecular and macroscopic biosignatures. Cherts, a type of silica-dominated rocks, provide a unique archive of ancient terrestrial life while quartz is the emblematic mineral of the Earth's continental crust. On Mars, hydrated silica has been detected in several locations based on remote sensing and rover-based studies. In the present article we report on the detection of cobbles made of hydrated silica (opal or chalcedony), as well as well-crystallized quartz. These detections were made with the SuperCam instrument onboard Perseverance (Mars 2020 mission), using a combination of LIBS, infrared and Raman spectroscopy. Quartz-dominated stones are detected unambiguously for the first time on the Martian surface, and based on grain size and crystallinity are proposed to be of hydrothermal origin. Although these rocks were all found as float, we propose that these detections are part of a common hydrothermal system, and represent different depths / temperatures of precipitation. This attests that hydrothermal processes were active in and around Jezero crater, possibly triggered by the Jezero crater-forming impact. These silica-rich rocks, in particular opaline silica, are very promising targets for sampling and return to Earth given their high biosignature preservation potential.

Earth and Planetary Science Letters↗

Ultramafic float rocks at Jezero crater (Mars): Excavation of lower crustal rocks or mantle peridotites by impact cratering?

Based on observation and data from meteorites and in situ scientific missions, experiments as well as models, the Martian mantle is assumed to share some compositional and mineralogical affinity with the terrestrial mantle. However, there might be subtle differences like the Martian mantle being more ferroan. Yet, we do not have any direct analysis of a Martian mantle rock to confirm this assumption. NASA’s Perseverance rover found olivine-rich boulder-sized float rocks on the upper Jezero fan (Mars). These boulders have an ultramafic composition and their mineralogy is dominantly composed of Fo 73±3 olivine with high-Mg orthopyroxene, Cr-rich Ti-Fe oxides and minor plagioclase and high-Ca pyroxene. Microtextural and petrological analysis reveals that these minerals crystallized at equilibrium. In addition, these boulders are different from all the bedrocks analyzed by Perseverance along its traverse which are crustal igneous rocks and sediments. Comparing our data to Martian meteorites and available Mars bulk silicate models (BSM), we discuss that these boulders could represent primitive melts and/or lower crustal material, and we specifically hypothesize that they could be mantle peridotites. We propose that these putative mantle rocks could have been excavated by the succession of impacts from the shallow mantle or lower crust in the Isidis region where Jezero crater is located. These olivine-rich boulders could thereby constitute the first direct analysis of a Martian mantle rock.

Earth and Planetary Science Letters↗

Ageing of organic materials at the surface of Mars: A Raman study aboard Perseverance

The Perseverance rover is exploring Jezero crater on Mars, one of its goals being to collect samples to be returned to Earth to search for organic remains of ancient Martian life. However, the organic content of these rocks has likely suffered from the radiation environment on the surface of Mars to an extent yet to be quantified. For the first time, a 1000 sols long ageing experiment was conducted at the surface of Mars, i.e. under actual Martian conditions, relying on the 100 % organic Ertalyte target carried by Perseverance. White at landing, the Ertalyte target has turned brown with time, while its Raman signal changed, with a modification of the background (its maximum has shifted from 1500 to 2000 cm −1 ) and a reduction of the contribution of the Raman signal of Ertalyte (by a factor of 5 over the first 500 sols). Given the intrinsic resistance of the Ertalyte to UV exposure, which is not anticipated for most Martian organic materials, these results suggest that exposure at the surface of Mars will make the detection of Martian organic molecules challenging.

Geochemical Perspectives Letters↗

Intense alteration on early Mars revealed by high-aluminum rocks at Jezero Crater

The NASA Perseverance rover discovered light-toned float rocks scattered across the surface of Jezero crater that are particularly rich in alumina ( ~ 35 wt% Al 2 O 3 ) and depleted in other major elements (except silica). These unique float rocks have heterogeneous mineralogy ranging from kaolinite/halloysite-bearing in hydrated samples, to spinel-bearing in dehydrated samples also containing a dehydrated Al-rich phase. Here we describe SuperCam and Mastcam-Z observations of the float rocks, including the first in situ identification of kaolinite or halloysite on another planet, and dehydrated phases including spinel and apparent partially dehydroxylated kaolinite. The presence of spinel in these samples is likely detrital in origin, surviving kaolinitization, pointing to an ultramafic origin. However, the association of low hydration with increased Al 2 O 3 abundances suggests heating-induced dehydration which could have occurred during the lithification or impact excavation of these rocks. Given the orbital context of kaolinite-bearing megabreccia in the Jezero crater rim, we propose an origin for these rocks involving intense aqueous alteration of the parent material, followed by dehydration/lithification potentially through impact processes, and dispersion into Jezero crater through flood or impact-related processes.

Communications Earth & Environment↗

Likely ferromagnetic minerals identified by the Perseverance rover and implications for future paleomagnetic analyses of returned Martian samples

Although Mars today does not have a core dynamo, magnetizations in the Martian crust and in meteorites suggest a magnetic field was present prior to 3.7 billion years (Ga) ago. However, the lack of ancient, oriented Martian bedrock samples available on Earth has prevented accurate estimates of the dynamo's intensity, lifetime, and direction. Constraining the nature and lifetime of the dynamo are vital to understanding the evolution of the Martian interior and the potential habitability of the planet. The Perseverance rover, which is exploring Jezero crater, is providing an unprecedented opportunity to address this gap by acquiring absolutely oriented bedrock samples with estimated ages from ∼2.3 to >4.1 Ga. As a first step in establishing whether these samples could contain records of Martian paleomagnetism, it is important to determine their ferromagnetic mineralogy, the grain sizes of the phases, and the forms of any natural remanent magnetization. Here, we synthesize data from various Perseverance instruments to achieve those goals and discuss the implications for future laboratory paleomagnetic analyses. Using the rover's instrument payload, we find that cored samples likely contain iron oxides enriched in Cr and Ti. The relative proportions of Fe, Ti, and Cr indicate that the phases may be titanomagnetite or Fe-Ti-Cr spinels that are ferromagnetic at room temperature, but we cannot rule out the presence of non-ferromagnetic ulvöspinel, ilmenite, and chromite due to signal mixing. Importantly, the inferred abundance of iron oxides in the samples suggests that even <1 mm-sized samples will be easily measurable by present-day magnetometers.

Journal of Geophysical Research: Planets↗

A new database of giant impacts over a wide range of masses and with material strength: A first analysis of outcomes

In the late stage of terrestrial planet formation, planets are predicted to undergo pairwise collisions known as giant impacts. Here, we present a high-resolution database of giant impacts for differentiated colliding bodies of iron–silicate composition, with target masses ranging from 1 × 10 −4 M ⊕ up to super-Earths (5 M ⊕ ). We vary the impactor-to-target mass ratio, core–mantle (iron–silicate) fraction, impact velocity, and impact angle. Strength in the form of friction is included in all simulations. We find that, due to strength, the collisions with bodies smaller than about 2 × 10 −3 M ⊕ can result in irregular shapes, compound-core structures, and captured binaries. We observe that the characteristic escaping velocity of smaller remnants (debris) is approximately half of the impact velocity, significantly faster than currently assumed in N -body simulations of planet formation. Incorporating these results in N -body planet formation studies would provide more realistic debris–debris and debris–planet interactions.

The Planetary Science Journal↗

Moon-forming impactor as a source of Earth’s basal mantle anomalies

Seismic images of Earth’s interior have revealed two continent-sized anomalies with low seismic velocities, known as the large low-velocity provinces (LLVPs), in the lowermost mantle . The LLVPs are often interpreted as intrinsically dense heterogeneities that are compositionally distinct from the surrounding mantle . Here we show that LLVPs may represent buried relics of Theia mantle material (TMM) that was preserved in proto-Earth’s mantle after the Moon-forming giant impact . Our canonical giant-impact simulations show that a fraction of Theia’s mantle could have been delivered to proto-Earth’s solid lower mantle. We find that TMM is intrinsically 2.0–3.5% denser than proto-Earth’s mantle based on models of Theia’s mantle and the observed higher FeO content of the Moon. Our mantle convection models show that dense TMM blobs with a size of tens of kilometres after the impact can later sink and accumulate into LLVP-like thermochemical piles atop Earth’s core and survive to the present day. The LLVPs may, thus, be a natural consequence of the Moon-forming giant impact. Because giant impacts are common at the end stages of planet accretion, similar mantle heterogeneities caused by impacts may also exist in the interiors of other planetary bodies.

Nature↗

An examination of soil crusts on the floor of Jezero crater, Mars

Martian soils are critically important for understanding the history of Mars, past potentially habitable environments, returned samples, and future human exploration. This paper examines soil crusts on the floor of Jezero crater encountered during initial phases of the Mars 2020 mission. Soil surface crusts have been observed on Mars at other locations, starting with the two Viking Lander missions. Rover observations show that soil crusts are also common across the floor of Jezero crater, revealed in 45 of 101 locations where rover wheels disturbed the soil surface, 2 out of 7 helicopter flights that crossed the wheel tracks, and 4 of 8 abrasion/drilling sites. Most soils measured by the SuperCam laser-induced breakdown spectroscopy (LIBS) instrument show high hydrogen content at the surface, and fine-grained soils also show a visible/near infrared (VISIR) 1.9 µm H 2 O absorption feature. The Planetary Instrument for X-ray Lithochemistry (PIXL) and SuperCam observations suggest the presence of salts at the surface of rocks and soils. The correlation of S and Cl contents with H contents in SuperCam LIBS measurements suggests that the salts present are likely hydrated. On the “Naltsos” target, magnesium and sulfur are correlated in PIXL measurements, and Mg is tightly correlated with H at the SuperCam points, suggesting hydrated Mg-sulfates. Mars Environmental Dynamics Analyzer (MEDA) observations indicate possible frost events and potential changes in the hydration of Mg-sulfate salts. Jezero crater soil crusts may therefore form by salts that are hydrated by changes in relative humidity and frost events, cementing the soil surface together.

Journal of Geophysical Research: Planets↗

Assessment of lunar resource exploration in 2022

The idea of mining the Moon, once purely science-fiction, is now on the verge of becoming reality. Taking advantage of the resources on the Moon is part of the plans of many nations and some enterprising commercial entities; demonstrating in-situ (in place) resource utilization near the lunar south pole is an explicit goal of the United States’ Artemis program. Economic extraction and sustainable management of these resources require understanding the nature, quantity, and quality of each resource. This publication aims to provide a relatively simple, but technically rigorous, assessment of the status of lunar resource exploration in 2022. Building on the experience of the U.S. Geological Survey in conducting resource assessments for Earth, we propose a general methodology for quantitative lunar resources assessments. Lunar resources can be categorized as energy, mineral, and water and classified with respect to their certainty and their recoverability. The portion of the technically recoverable resource that can be converted to a commodity within budgetary and other mission constraints can be classified as a “reserve.” For energy resources, solar energy is known to be especially abundant along some high ridges near the lunar poles and the technology to exploit it is mature. Mineral resources, largely in the form of loose rock powder that covers the surface of the Moon, are also widely accessible in large quantities. Many different technologies to convert this material into useful commodities (such as landing pads and oxygen) are currently being developed and are likely to be available for industrial-scale application within 30 years. Water ice almost certainly exists in the polar regions of the Moon but there are fundamental unanswered questions about when and how the ice formed—leaving us without knowledge of the form, quantity, quality, and distribution of lunar ice. Until rover missions bring new ground truth data, lunar ice will remain a highly speculative resource that may be both limited and non-renewable.

Circular↗

The role of giant impacts in planet formation

Planets are expected to conclude their growth through a series of giant impacts: energetic, global events that significantly alter planetary composition and evolution. Computer models and theory have elucidated the diverse outcomes of giant impacts in detail, improving our ability to interpret collision conditions from observations of their remnants. However, many open questions remain, as even the formation of the Moon—a widely suspected giant-impact product for which we have the most information—is still debated. We review giant-impact theory, the diverse nature of giant-impact outcomes, and the governing physical processes. We discuss the importance of computer simulations, informed by experiments, for accurately modeling the impact process. Finally, we outline how the application of probability theory and computational advancements can assist in inferring collision histories from observations, and we identify promising opportunities for advancing giant-impact theory in the future. Giant impacts exhibit diverse possible outcomes leading to changes in planetary mass, composition, and thermal history depending on the conditions. Improvements to computer simulation methodologies and new laboratory experiments provide critical insights into the detailed outcomes of giant impacts. When colliding planets are similar in size, they can merge or escape one another with roughly equal probability, but with different effects on their resulting masses, densities, and orbits. Different sequences of giant impacts can produce similar planets, encouraging the use of probability theory to evaluate distinct formation hypothesis.

Annual Reviews of Earth and Planetary Science↗

In situ recording of Mars soundscape

Prior to the Perseverance rover landing, the acoustic environment of Mars was unknown. Models predicted that: (i) atmospheric turbulence changes at centimeter scales or smaller at the point where molecular viscosity converts kinetic energy into heat 1 , (ii) the speed of sound varies at the surface with frequency 2,3 , and (iii) high frequency waves are strongly attenuated with distance in CO 2 2–4 . However, theoretical models were uncertain because of a lack of experimental data at low pressure, and the difficulty to characterize turbulence or attenuation in a closed environment. Here using Perseverance microphone recordings, we present the first characterization of Mars’ acoustic environment and pressure fluctuations in the audible range and beyond, from 20 Hz to 50 kHz. We find that atmospheric sounds extend measurements of pressure variations down to 1,000 times smaller scales than ever observed before, revealing a dissipative regime extending over 5 orders of magnitude in energy. Using point sources of sound (Ingenuity rotorcraft, laser-induced sparks), we highlight two distinct values for the speed of sound that are ~10 m/s apart below and above 240 Hz, a unique characteristic of low-pressure CO 2 -dominated atmosphere. We also provide the acoustic attenuation with distance above 2 kHz, allowing us to elucidate the large contribution of the CO 2 vibrational relaxation in the audible range. These results establish a ground truth for modelling of acoustic processes, which is critical for studies in atmospheres like Mars and Venus ones.

Nature↗

Post-landing major element quantification using SuperCam laser induced breakdown spectroscopy

The SuperCam instrument on the Perseverance Mars 2020 rover uses a pulsed 1064 nm laser to ablate targets at a distance and conduct laser induced breakdown spectroscopy (LIBS) by analyzing the light from the resulting plasma. SuperCam LIBS spectra are preprocessed to remove ambient light, noise, and the continuum signal present in LIBS observations. Prior to quantification, spectra are masked to remove noisier spectrometer regions and spectra are normalized to minimize signal fluctuations and effects of target distance. In some cases, the spectra are also standardized or binned prior to quantification. To determine quantitative elemental compositions of diverse geologic materials at Jezero crater, Mars, we use a suite of 1198 laboratory spectra of 334 well-characterized reference samples. The samples were selected to span a wide range of compositions and include typical silicate rocks, pure minerals (e.g., silicates, sulfates, carbonates, oxides), more unusual compositions (e.g., Mn ore and sodalite), and replicates of the sintered SuperCam calibration targets (SCCTs) onboard the rover. For each major element (SiO 2 , TiO 2 , Al 2 O 3 , FeO T , MgO, CaO, Na 2 O, K 2 O), the database was subdivided into five “folds” with similar distributions of the element of interest. One fold was held out as an independent test set, and the remaining four folds were used to optimize multivariate regression models relating the spectrum to the composition. We considered a variety of models, and selected several for further investigation for each element, based primarily on the root mean squared error of prediction (RMSEP) on the test set, when analyzed at 3 m. In cases with several models of comparable performance at 3 m, we incorporated the SCCT performance at different distances to choose the preferred model. Shortly after landing on Mars and collecting initial spectra of geologic targets, we selected one model per element. Subsequently, with additional data from geologic targets, some models were revised to ensure results that are more consistent with geochemical constraints. The calibration discussed here is a snapshot of an ongoing effort to deliver the most accurate chemical compositions with SuperCam LIBS.

Spectrochimica Acta B↗

Aqueously altered igneous rocks sampled on the floor of Jezero crater, Mars

The Perseverance rover landed in Jezero crater, Mars, to investigate ancient lake and river deposits. We report observations of the crater floor, below the crater’s sedimentary delta, finding the floor consists of igneous rocks altered by water. The lowest exposed unit, informally named Séítah, is a coarsely crystalline olivine-rich rock, which accumulated at the base of a magma body. Fe-Mg carbonates along grain boundaries indicate reactions with CO 2 -rich water, under water-poor conditions. Overlying Séítah is a unit informally named Máaz, which we interpret as lava flows or the chemical complement to Séítah in a layered igneous body. Voids in these rocks contain sulfates and perchlorates, likely introduced by later near-surface brine evaporation. Core samples of these rocks were stored aboard Perseverance for potential return to Earth.

Science↗