Search USGS⌕ Search

Geology topics

Tom Gleeson

Publications and source records attributed to Tom Gleeson.

12 recordsLinked to original sources

Streamflow depletion caused by groundwater pumping: Fundamental research priorities for management-relevant science

Reductions in streamflow caused by groundwater pumping, known as “streamflow depletion,” link the hydrologic process of stream-aquifer interactions to human modifications of the water cycle. Isolating the impacts of groundwater pumping on streamflow is challenging because other climate and human activities concurrently impact streamflow, making it difficult to separate individual drivers of hydrologic change. In addition, there can be lags between when pumping occurs and when streamflow is affected. However, accurate quantification of streamflow depletion is critical to integrated groundwater and surface water management decision making. Here, we highlight research priorities to help advance fundamental hydrologic science and better serve the decision-making process. Key priorities include (a) linking streamflow depletion to decision-relevant outcomes such as ecosystem function and water users to align with partner needs; (b) enhancing partner trust and applicability of streamflow depletion methods through benchmarking and coupled model development; and (c) improving links between streamflow depletion quantification and decision-making processes. Catalyzing research efforts around the common goal of enhancing our streamflow depletion decision-support capabilities will require disciplinary advances within the water science community and a commitment to transdisciplinary collaboration with diverse water-connected disciplines, professions, governments, organizations, and communities.

Water Resource Research↗

Quantifying streamflow depletion from groundwater pumping: A practical review of past and emerging approaches for water management

Groundwater pumping can cause reductions in streamflow (“streamflow depletion”) that must be quantified for conjunctive management of groundwater and surface water resources. However, streamflow depletion cannot be measured directly and is challenging to estimate because pumping impacts are masked by streamflow variability due to other factors. Here, we conduct a management-focused review of analytical, numerical, and statistical models for estimating streamflow depletion and highlight promising emerging approaches. Analytical models are easy to implement, but include many assumptions about the stream and aquifer. Numerical models are widely used for streamflow depletion assessment and can represent many processes affecting streamflow, but have high data, expertise, and computational needs. Statistical approaches are a historically underutilized tool due to difficulty in attributing causality, but emerging causal inference techniques merit future research and development. We propose that streamflow depletion-related management questions can be divided into three broad categories (attribution, impacts, and mitigation) that influence which methodology is most appropriate. We then develop decision criteria for method selection based on suitability for local conditions and the management goal, actionability with current or obtainable data and resources, transparency with respect to process and uncertainties, and reproducibility.

Journal of the American Water Resources Associatio↗

The suitability of using dissolved gases to determine groundwater discharge to high gradient streams

Determining groundwater discharge to streams using dissolved gases is known to be useful over a wide range of streamflow rates but the suitability of dissolved gas methods to determine discharge rates in high gradient mountain streams has not been sufficiently tested, even though headwater streams are critical as ecological habitats and water resources. The aim of this study is to test the suitability of using dissolved gases to determine groundwater discharge rates to high gradient streams by field experiments in a well-characterized, high gradient mountain stream and a literature review. At a reach scale (550 m) we combined stream and groundwater radon activity measurements with an in-stream SF 6 tracer test. By means of numerical modeling we determined gas exchange velocities and derived very low groundwater discharge rates (∼15% of streamflow). These groundwater discharge rates are below the uncertainty range of physical streamflow measurements and consistent with temperature, specific conductance and streamflow measured at multiple locations along the reach. At a watershed-scale (4 km), we measured CFC-12 and δ 18 O concentrations and determined gas exchange velocities and groundwater discharge rates with the same numerical model. The groundwater discharge rates along the 4 km stream reach were highly variable, but were consistent with the values derived in the detailed study reach. Additionally, we synthesized literature values of gas exchange velocities for different stream gradients which show an empirical relationship that will be valuable in planning future dissolved gas studies on streams with various gradients. In sum, we show that multiple dissolved gas tracers can be used to determine groundwater discharge to high gradient mountain streams from reach to watershed scales.

California↗

Crustal permeability

Permeability is the dominant parameter in most hydrogeologic studies. There is abundant evidence for dynamic variations in permeability in time as well as space, and throughout the crust. Whether this dynamic behavior should be included in quantitative models depends on the problem at hand.

Hydrogeology Journal↗

Using noble gas tracers to constrain a groundwater flow model with recharge elevations: A novel approach for mountainous terrain

Environmental tracers provide information on groundwater age, recharge conditions, and flow processes which can be helpful for evaluating groundwater sustainability and vulnerability. Dissolved noble gas data have proven particularly useful in mountainous terrain because they can be used to determine recharge elevation. However, tracer-derived recharge elevations have not been utilized as calibration targets for numerical groundwater flow models. Herein, we constrain and calibrate a regional groundwater flow model with noble-gas-derived recharge elevations for the first time. Tritium and noble gas tracer results improved the site conceptual model by identifying a previously uncertain contribution of mountain block recharge from the Coast Mountains to an alluvial coastal aquifer in humid southwestern British Columbia. The revised conceptual model was integrated into a three-dimensional numerical groundwater flow model and calibrated to hydraulic head data in addition to recharge elevations estimated from noble gas recharge temperatures. Recharge elevations proved to be imperative for constraining hydraulic conductivity, recharge location, and bedrock geometry, and thus minimizing model nonuniqueness. Results indicate that 45% of recharge to the aquifer is mountain block recharge. A similar match between measured and modeled heads was achieved in a second numerical model that excludes the mountain block (no mountain block recharge), demonstrating that hydraulic head data alone are incapable of quantifying mountain block recharge. This result has significant implications for understanding and managing source water protection in recharge areas, potential effects of climate change, the overall water budget, and ultimately ensuring groundwater sustainability.

Water Resources Research↗

Crustal permeability: Introduction to the special issue

The topic of crustal permeability is of broad interest in light of the controlling effect of permeability on diverse geologic processes and also timely in light of the practical challenges associated with emerging technologies such as hydraulic fracturing for oil and gas production (‘fracking’), enhanced geothermal systems, and geologic carbon sequestration. This special issue of Geofluids is also motivated by the historical dichotomy between the hydrogeologic concept of permeability as a static material property that exerts control on fluid flow and the perspective of economic geologists, geophysicists, and crustal petrologists who have long recognized permeability as a dynamic parameter that changes in response to tectonism, fluid production, and geochemical reactions. Issues associated with fracking, enhanced geothermal systems, and geologic carbon sequestration have already begun to promote a constructive dialog between the static and dynamic views of permeability, and here we have made a conscious effort to include both viewpoints. This special issue also focuses on the quantification of permeability, encompassing both direct measurement of permeability in the uppermost crust and inferential permeability estimates, mainly for the deeper crust.

Geofluids↗

DigitalCrust – a 4D data system of material properties for transforming research on crustal fluid flow

Fluid circulation in the Earth's crust plays an essential role in surface, near surface, and deep crustal processes. Flow pathways are driven by hydraulic gradients but controlled by material permeability, which varies over many orders of magnitude and changes over time. Although millions of measurements of crustal properties have been made, including geophysical imaging and borehole tests, this vast amount of data and information has not been integrated into a comprehensive knowledge system. A community data infrastructure is needed to improve data access, enable large-scale synthetic analyses, and support representations of the subsurface in Earth system models. Here, we describe the motivation, vision, challenges, and an action plan for a community-governed, four-dimensional data system of the Earth's crustal structure, composition, and material properties from the surface down to the brittle–ductile transition. Such a system must not only be sufficiently flexible to support inquiries in many different domains of Earth science, but it must also be focused on characterizing the physical crustal properties of permeability and porosity, which have not yet been synthesized at a large scale. The DigitalCrust is envisioned as an interactive virtual exploration laboratory where models can be calibrated with empirical data and alternative hypotheses can be tested at a range of spatial scales. It must also support a community process for compiling and harmonizing models into regional syntheses of crustal properties. Sustained peer review from multiple disciplines will allow constant refinement in the ability of the system to inform science questions and societal challenges and to function as a dynamic library of our knowledge of Earth's crust.

Geofluids↗

An enhanced model of land water and energy for global hydrologic and earth-system studies

LM3 is a new model of terrestrial water, energy, and carbon, intended for use in global hydrologic analyses and as a component of earth-system and physical-climate models. It is designed to improve upon the performance and to extend the scope of the predecessor Land Dynamics (LaD) and LM3V models by better quantifying the physical controls of climate and biogeochemistry and by relating more directly to components of the global water system that touch human concerns. LM3 includes multilayer representations of temperature, liquid water content, and ice content of both snowpack and macroporous soil–bedrock; topography-based description of saturated area and groundwater discharge; and transport of runoff to the ocean via a global river and lake network. Sensible heat transport by water mass is accounted throughout for a complete energy balance. Carbon and vegetation dynamics and biophysics are represented as in LM3V. In numerical experiments, LM3 avoids some of the limitations of the LaD model and provides qualitatively (though not always quantitatively) reasonable estimates, from a global perspective, of observed spatial and/or temporal variations of vegetation density, albedo, streamflow, water-table depth, permafrost, and lake levels. Amplitude and phase of annual cycle of total water storage are simulated well. Realism of modeled lake levels varies widely. The water table tends to be consistently too shallow in humid regions. Biophysical properties have an artificial stepwise spatial structure, and equilibrium vegetation is sensitive to initial conditions. Explicit resolution of thick (>100 m) unsaturated zones and permafrost is possible, but only at the cost of long (≫300 yr) model spinup times.

Journal of Hydrometeorology↗

Classifying the water table at regional to continental scales

Water tables at regional to continental scales can be classified into two distinct types: recharge-controlled water tables that are largely disconnected from topography and topography-controlled water tables that are closely tied to topography. We use geomatic synthesis of hydrologic, geologic and topographic data sets to quantify and map water-table type over the contiguous United States using a dimensionless criterion introduced by Haitjema and Mitchell-Bruker (2005), called the water-table ratio, which differentiates water-table type. Our analysis indicates that specific regions of the United States have broadly contiguous and characteristic water-table types. Water-table ratio relates to water-table depth and the potential for regional groundwater flow. In regions with recharge-controlled water tables, for example the Southwest or Rocky Mountains, USA, water-tables depths are generally greater and more variable and regional groundwater flow is generally more important as a percentage of the watershed budget. Water-table depths are generally shallow and less variable, and regional groundwater flow is limited in areas with topography-controlled water tables such as the Northeast USA. The water-table ratio is a simple but powerful criterion for evaluating regional groundwater systems over broad areas.

Geophysical Research Letters↗

Mapping permeability over the surface of the Earth

Permeability, the ease of fluid flow through porous rocks and soils, is a fundamental but often poorly quantified component in the analysis of regional‐scale water fluxes. Permeability is difficult to quantify because it varies over more than 13 orders of magnitude and is heterogeneous and dependent on flow direction. Indeed, at the regional scale, maps of permeability only exist for soil to depths of 1–2 m. Here we use an extensive compilation of results from hydrogeologic models to show that regional‐scale (>5 km) permeability of consolidated and unconsolidated geologic units below soil horizons (hydrolithologies) can be characterized in a statistically meaningful way. The representative permeabilities of these hydrolithologies are used to map the distribution of near‐surface (on the order of 100 m depth) permeability globally and over North America. The distribution of each hydrolithology is generally scale independent. The near‐surface mean permeability is of the order of ∼5 × 10 −14 m 2 . The results provide the first global picture of near‐surface permeability and will be of particular value for evaluating global water resources and modeling the influence of climate‐surface‐subsurface interactions on global climate change.

Geophysical Research Letters↗

Groundwater sustainability strategies

Groundwater extraction has facilitated significant social development and economic growth, enhanced food security and alleviated drought in many farming regions. But groundwater development has also depressed water tables, degraded ecosystems and led to the deterioration of groundwater quality, as well as to conflict among water users. The effects are not evenly spread. In some areas of India, for example, groundwater depletion has preferentially affected the poor. Importantly, groundwater in some aquifers is renewed slowly, over decades to millennia, and coupled climate–aquifer models predict that the flux and/or timing of recharge to many aquifers will change under future climate scenarios. Here we argue that communities need to set multigenerational goals if groundwater is to be managed sustainably.

Nature Geoscience↗

Regional groundwater flow in mountainous terrain: Three‐dimensional simulations of topographic and hydrogeologic controls

This study uses numerical simulations to define the salient controls on regional groundwater flow in 3‐D mountainous terrain by systematically varying topographic and hydrogeologic variables. Topography for idealized multiple‐basin mountainous terrain is derived from geomatic data and literature values. Water table elevation, controlled by the ratio of recharge to hydraulic conductivity, largely controls the distribution of recharged water into local, regional, and perpendicular flow systems, perpendicular flow being perpendicular to the regional topographic gradient. Both the relative (%) and absolute (m 3 /d) values of regional flow and perpendicular flow are examined. The relationship between regional flow and water table elevation is highly nonlinear. With lower water table elevations, relative and absolute regional flow dramatically increase and decrease, respectively, as the water table is lowered further. However, for higher water table elevations above the top of the headwater stream, changes in water table elevation have little effect on regional flow. Local flow predominates in high water table configurations, with regional and perpendicular flow <15% and <10%, respectively, of total recharge in the models tested. Both the relative and the maximum absolute regional flow are directly controlled by the degree of incision of the mountain drainage network; the elevation of mountain ridges is considerably less important. The percentage of the headwater stream with perennial streamflow is a potentially powerful indicator of regional flow in all water table configurations and may be a good indicator of the susceptibility of mountain groundwater systems to increased aridity.

Water Resources Research↗