Geology topics

Thomas Chapin

Publications and source records attributed to Thomas Chapin.

7 recordsLinked to original sources

USGS2026

Sampling and analysis plan for the water-quality monitoring program in Lake Koocanusa and upper Kootenai River, Montana, water years 2022–23

The U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency, collected water-quality samples and environmental data in Lake Koocanusa (also known as “Koocanusa Reservoir”), the Kootenai River, and the Tobacco River during water years 2022–23. The transboundary Lake Koocanusa is in southeastern British Columbia, Canada, and northwestern Montana, United States. It was formed by constructing Libby Dam on the Kootenai River 26 kilometers upstream from Libby, Montana. One of the lake sites and the Kootenai River site, in the Libby Dam tailwater (the outflow of the lake flow into the Kootenai River), were equipped with automated, high-frequency ServoSipper water samplers. At the lake site, these samplers were mounted to pontoon platforms during the summer, and a submersible ServoSipper sipper was deployed with ice buoys during the winter. Samples were automatically collected from multiple depths. At the Kootenai River site, these samplers were housed in the gage house. In water year 2022, discrete water-quality samples were collected every 4–6 weeks, year round, at all four lake sites in the Kootenai River between April and November. In water year 2023, discrete water-quality samples were collected at three lake sites and the Kootenai and Tobacco River sites every 4–6 weeks. The goal of this project was to collect multidepth, high-frequency vertical and temporal water-quality samples and data to understand the limnological and biological processes that control variations and trends in selenium concentrations and loads throughout Lake Koocanusa and in the Libby Dam tailwater at the southern end of the lake. This sampling and analysis plan documents the organization, sampling and data-collection scheme and design, pre- and post-collection processes, and quality-assurance and quality-control procedures of the Koocanusa/Kootenai water-quality monitoring program during water years 2022–23.

Montana↗

USGS2023

Sampling and analysis plan for the Koocanusa Reservoir and upper Kootenai River, Montana, water-quality monitoring program, 2021

In 2021, the U.S. Geological Survey will collect water-quality samples and environmental data from 3 sites in Koocanusa Reservoir and from 1 site in the Kootenai River. The transboundary Koocanusa Reservoir is in southeastern British Columbia, Canada, and northwestern Montana, United States, and was formed with the construction of Libby Dam on the Kootenai River 26 kilometers upstream from Libby, Montana. Two of the reservoir sites and the Kootenai River site, in the Libby Dam tailwater (the outflow of the reservoir flow into the Kootenai River), are equipped with automated, high-frequency ServoSipper water samplers. At the two reservoir sites, these samplers are mounted to pontoon platforms and automatically collect samples from multiple depths; a ServoSipper sampler was deployed at one site in 2019, and another ServoSipper sampler will be deployed at a second site in 2021. Discrete water-quality samples will be collected monthly at two depths at the river site and at two of the reservoir sites. The goal of this project is to collect multidepth, high-frequency vertical and temporal water-quality samples and data to understand the limnological and biological processes that control variations and trends in selenium concentrations and loads throughout Koocanusa Reservoir and in the Libby Dam tailwater at the southern end of the reservoir. This sampling and analysis plan documents the organization, sampling and data-collection scheme and design, pre- and post-collection processes, and quality-assurance and quality-control procedures.

Montana↗

USGS2023

WellSTIC: A cost-effective sensor for performing point dilution tests to measure groundwater velocity in shallow aquifers

Many individual measurement points are required to characterize groundwater velocity within an aquifer. Groundwater velocity is most commonly measured using a network of >5 cm diameter monitoring wells, which, if not already present at a site, are expensive and labor-intensive to install. Drive-point piezometers—simple, cost-effective wells that can be installed by hand—are a common tool for sampling groundwater in shallow, alluvial aquifers, but most groundwater velocity measurement techniques require equipment that is too large for these narrow (usually <2 cm inside diameter) piezometers. In this technical note, we introduce a low-cost sensor and well packer system (<$90 USD) for performing point dilution tests in narrow piezometers. Field data show that the magnitude of groundwater velocity measured with this technique agrees with velocities computed from natural gradient tracer tests. Additionally, with proper calibration, these sensors can be used to continuously monitor in-well specific conductance, either during inter-well tracer tests with saline tracers or for water quality monitoring. This system is a viable tool for rapid assessment of the magnitude of groundwater velocity in shallow aquifers.

Water Resources Research↗

USGS2020

Assessing uranium and select trace elements associated with breccia pipe uranium deposits in the Colorado River and main tributaries in Grand Canyon, USA

Assessing chemical loading from streams in remote, difficult-to-access watersheds is challenging. The Grand Canyon area in northern Arizona, an international tourist destination and sacred place for many Native Americans, is characterized by broad plateaus divided by canyons as much as two-thousand meters deep and hosts some of the highest-grade uranium deposits in the U.S. From 2015–2018 major surface waters in Grand Canyon were monitored for select elements associated with breccia-pipe uranium deposits in the area, including uranium, arsenic, cadmium, and lead. Dissolved constituents in the Colorado River were monitored upstream (Lees Ferry), in the middle (Phantom Ranch), and downstream (Diamond Creek) of uranium mining areas. Concentrations of uranium, arsenic, cadmium, and lead at these main-stem sites varied little during the study period and were all well below human health and aquatic life benchmark criteria (30, 10, 5, and 15 μg/L maximum contaminant levels and 15, 150, 0.8, and 3.1 μg/L aquatic life criteria, respectively). Additionally, dissolved and sediment-bound constituents were monitored during a wide range of streamflow conditions at Little Colorado River, Kanab Creek, and Havasu Creek tributaries, whose watersheds have experienced different levels of uranium mining activities over time. Samples from the tributary sites contained ≤3.8 μg/L of dissolved cadmium and lead, and ≤17 μg/L of dissolved uranium. Dissolved arsenic also was mostly below human and aquatic life criteria at Little Colorado River and Kanab Creek; however, 63% of water samples from Havasu Creek were above the maximum contaminant level for arsenic. Arsenic in suspended sediment was greater than sediment quality guidelines in 9%, 35%, and 35% of samples from Little Colorado River, Kanab Creek, and Havasu Creek, respectively. At the concentrations observed during this study, tributaries contributed on average only about 0.12 μg/L of arsenic and 0.03 μg/L of uranium to the main-stem river. This study demonstrates how chemical loading from mined watersheds may be reliably assessed across a wide range of flow conditions in challenging locations.

Arizona↗

USGS2016

New perspectives on a 140-year legacy of mining and abandoned mine cleanup in the San Juan Mountains, Colorado

The Gold King mine water release that occurred on 5 August 2015 near the historical mining community of Silverton, Colorado, highlights the environmental legacy that abandoned mines have on the environment. During reclamation efforts, a breach of collapsed workings at the Gold King mine sent 3 million gallons of acidic and metal-rich mine water into the upper Animas River, a tributary to the Colorado River basin. The Gold King mine is located in the scenic, western San Juan Mountains, a region renowned for its volcano-tectonic and gold-silver-base metal mineralization history. Prior to mining, acidic drainage from hydrothermally altered areas was a major source of metals and acidity to streams, and it continues to be so. In addition to abandoned hard rock metal mines, uranium mine waste poses a long-term storage and immobilization challenge in this area. Uranium resources are mined in the Colorado Plateau, which borders the San Juan Mountains on the west. Uranium processing and repository sites along the Animas River near Durango, Colorado, are a prime example of how the legacy of mining must be managed for the health and well-being of future generations. The San Juan Mountains are part of a geoenvironmental nexus where geology, mining, agriculture, recreation, and community issues converge. This trip will explore the geology, mining, and mine cleanup history in which a community-driven, watershed-based stakeholder process is an integral part. Research tools and historical data useful for understanding complex watersheds impacted by natural sources of metals and acidity overprinted by mining will also be discussed.

Colorado↗

USGS2015

High-frequency, long-duration water sampling in acid mine drainage studies: a short review of current methods and recent advances in automated water samplers

Hand-collected grab samples are the most common water sampling method but using grab sampling to monitor temporally variable aquatic processes such as diel metal cycling or episodic events is rarely feasible or cost-effective. Currently available automated samplers are a proven, widely used technology and typically collect up to 24 samples during a deployment. However, these automated samplers are not well suited for long-term sampling in remote areas or in freezing conditions. There is a critical need for low-cost, long-duration, high-frequency water sampling technology to improve our understanding of the geochemical response to temporally variable processes. This review article will examine recent developments in automated water sampler technology and utilize selected field data from acid mine drainage studies to illustrate the utility of high-frequency, long-duration water sampling.

Applied Geochemistry↗

USGS2014

Robust, low-cost data loggers for stream temperature, flow intermittency, and relative conductivity monitoring

Water temperature and streamflow intermittency are critical parameters influencing aquatic ecosystem health. Low-cost temperature loggers have made continuous water temperature monitoring relatively simple but determining streamflow timing and intermittency using temperature data alone requires significant and subjective data interpretation. Electrical resistance (ER) sensors have recently been developed to overcome the major limitations of temperature-based methods for the assessment of streamflow intermittency. This technical note introduces the STIC (Stream Temperature, Intermittency, and Conductivity logger); a robust, low-cost, simple to build instrument that provides long-duration, high-resolution monitoring of both relative conductivity (RC) and temperature. Simultaneously collected temperature and RC data provide unambiguous water temperature and streamflow intermittency information that is crucial for monitoring aquatic ecosystem health and assessing regulatory compliance. With proper calibration, the STIC relative conductivity data can be used to monitor specific conductivity.

Water Resources Research↗