Geology topics

Theron A. Sowers

Publications and source records attributed to Theron A. Sowers.

7 recordsLinked to original sources

USGS2026

Evaluating groundwater quality influences from oil field operations and other anthropogenic activities in an urban setting, Santa Fe Springs, California

Groundwater quality is often affected by anthropogenic activities in urban settings. This study examines groundwater quality in and around the Santa Fe Springs Oil Field in Los Angeles County, California, where oil and gas production commonly intersects with high density industrial, commercial and residential land uses. Utilizing a combination of new and historical data, we evaluated potential pathways that would allow for oil field formation fluids to migrate into groundwater and whether mixing may have occurred based on the distribution of groundwater and oil field formation fluid tracers in samples. Samples were analyzed for a wide array of constituents including volatile organic compounds, light hydrocarbons, major ions, and various isotopic compositions. Despite evidence of oil field infrastructure providing potential pathways of migration via uncemented annular spaces, casing breaches and historical disposal of oil field formation water in surface ponds, the distribution and occurrence of stable isotopes of water, chloride, boron, and total dissolved solids do not indicate mixing of oil field formation water and groundwater. However, methane isotopic signatures and the presence of heavier alkanes suggest gas from oil-bearing formations have migrated from depth via oil field well infrastructure. Volatile organic compound detections were mainly from manufactured compounds unrelated to oil and gas production, with a relatively limited number of petroleum hydrocarbons also detected. Volatile organic compounds were generally found in wells tapping shallow, modern aged groundwater, indicating anthropogenic activities occurring at or near land surface as the source. Study results suggest that while oil field infrastructure provides migration pathways for oil field formation fluids to be introduced into groundwater, urban land uses not related to oil and gas production are the primary drivers of groundwater quality degradation.

California↗

USGS2026

Groundwater quality near an oil field in a stream-dominated recharge setting, California, USA

Alluvial valley aquifers are important sources of water supply in many areas but effects of co-located oil and gas development on these resources have not been widely reported, especially in settings where recharge is dominated by stream infiltration. Interpreting the presence of geochemical indicators in the context of hydrology, geology, and other factors provides a more complete understanding of the relations between groundwater and sources of oil-field fluids and aids in identifying risks associated with oil and gas development. Groundwater and Salinas River water samples were collected in an alluvial valley near the San Ardo Oil Field in Monterey County, California and analyzed for a wide range of dissolved chemical, gas, and isotopic constituents to determine if oil-field fluids (water and gas from oil-producing and non-producing zones) have mixed with fresh groundwater used for supply. Hydraulic gradients, age-dating tracers, and other geochemical indicators show that recharge from the Salinas River has the potential to dilute oil-field fluids that might migrate or seep into the aquifer. Groundwater and Salinas River water collected downgradient of the San Ardo Oil Field showed little or no evidence of mixing with oil-field fluids. Some samples within the oil field contained trace amounts of hydrocarbons or elevated temperatures, indicating that any potential effects from oil-field activities are minor or have been diluted by recharge from the Salinas River. The two samples with the most geochemical evidence of potential mixing with oil-field fluids (SP-18 and GW-17) were collected west of or along the Los Lobos fault, where naturally occurring hydrocarbons are near the land surface. Those samples are also near active or inactive oil-field wells, and so anthropogenic activities and pathways cannot be ruled out as a cause of trace detections of hydrocarbons and elevated temperatures in the aquifer.

California↗

USGS2025

A joint Gaussian process model of geochemistry, geophysics, and temperature for groundwater TDS in the San Ardo Oil Field, California, USA

Decline in availability of fresh groundwater has expanded interest in brackish groundwater resources; however, the distribution of brackish groundwater is poorly understood. Water resources in sedimentary basins across the United States often overlie oil and gas development. Mapping of groundwater total dissolved solids (TDS) using data from oil well geophysical logs has become an important technique for identifying fresh and brackish groundwater. Existing geophysical log analysis methods use porosity and temperature to relate formation resistivity to TDS. Typically, natural geothermal gradients are used to estimate temperature at the location of collected resistivity. However, in thermally enhanced oil fields, steam is injected into the subsurface to mobilize high viscosity oil, creating variable temperature distributions. Furthermore, TDS derived from resistivity also depends on the fractions of dominant ions. Typically, chloride and bicarbonate fractions must be determined. It is also necessary to model TDS across many geologic units with heterogenous porosity distributions. Collectively, each quantity used to estimate TDS (resistivity, porosity, temperature, bicarbonate fraction) varies in space and time, and available data points are rarely collocated. Here, we present a new method of mapping groundwater TDS that continuously models each quantity together with a joint Gaussian process. This method enables mapping fresh and brackish water with practically available data. We apply this method to the San Ardo Oil Field in Monterey County, California, where steam injection occurs. In some areas of the aquifer system overlying the oil zone, the temperature is ∼75 °C, roughly twice the natural background value. Groundwater TDS is typically <1,500 mg/L in the aquifer and increases with depth to ∼9,000 mg/L in the oil-producing zone. A low-permeability clay layer delineates the fresh and brackish water, likely by inhibiting surface recharge from penetrating the deeper zones, allowing higher-TDS connate water to remain in place. Weaker lateral TDS trends may be controlled by recharge patterns associated with the Salinas River. Our model reveals with high certainty that groundwater has freshened in one localized part of the oil-producing zone and suggests with less certainty that more widespread freshening has also occurred. The lowering of TDS was possibly from decades of low-TDS steam injection and the associated fluid production and disposal operations.

California↗

USGS2024

Groundwater quality near the Placerita Oil Field, California, 2018

Groundwater-quality data and potential fluid-migration pathways near the Placerita Oil Field in Los Angeles County, California, were examined by the U.S. Geological Survey to determine if oil-field fluids (water and gas from oil-producing and non-producing zones) have mixed with groundwater resources. Six of the 13 new groundwater samples collected for this study contained petroleum hydrocarbons, thermogenic gas, inorganic chemical signatures, and (or) isotopic values consistent with potential mixing with fluids from hydrocarbon-bearing formations. For historical groundwater samples, benzene was the most detected petroleum hydrocarbon. The historical groundwater samples with a benzene concentration greater than 0.5 micrograms per liter were from environmental monitoring wells at industrial or commercial facilities unrelated to oil and gas development that, in many cases, have identified soil or groundwater contamination and were not typically analyzed for other constituents that could provide additional lines of evidence for potential mixing with oil-field fluids. Methane was not detected in any of the 12 historical samples with a reported measurement. Reviewing historical data revealed factors that could potentially adversely affect groundwater quality in the study area. These factors include modified hydraulic gradients caused by large volumes of water extracted from the main production area and reinjected downgradient into nonproducing zones, well-barrier failures in wells constructed in the northern part of the oil field before the 1970s, well-barrier failures in produced-water disposal wells downgradient from the main production area, and naturally occurring hydrocarbons at shallow intervals. The groundwater samples most geochemically similar to samples from hydrocarbon-bearing formations were in areas where hydrocarbons are naturally occurring at shallow intervals and where oil development is at shallow depths. Additional data for hydraulic heads, water quality, and formation temperatures at multiple depths in areas with large injection volumes and well-integrity issues are needed to evaluate whether those factors have contributed to mixing between fluids from oil-producing or injection formations and groundwater resources.

California↗

USGS2024

Land-use interactions, Oil-Field infrastructure, and natural processes control hydrocarbon and arsenic concentrations in groundwater, Poso Creek Oil Field, California, USA

Like many hydrocarbon production areas in the U.S., the Poso Creek Oil Field in California includes and is adjacent to other land uses (agricultural and other developed lands) that affect the hydrology and geochemistry of the aquifer overlying and adjacent to oil development. We hypothesize that the distributions of hydrocarbons and arsenic in groundwater in such areas will be controlled by complex interactions between mixed land uses, oil-field infrastructure, and natural processes. In 2020–2021, samples of groundwater and surface water were collected and analyzed for a large suite of inorganic and organic chemicals and isotope and gas tracers to test this hypothesis. Those data are supplemented with ancillary data on historical geochemistry, hydrology, geology, and oil-field infrastructure. Hydrocarbons in groundwater (e.g., methane through pentane gases and benzene) are associated with natural processes (e.g., fault offsets or transition in sediment depositional environment) and oil-field infrastructure (e.g., fluid-migration pathways associated with uncemented annulus in oil wells or unlined pits). Arsenic concentrations >10 μg per liter (μg/L; maximum concentration 12.9 μg/L) are associated with natural processes in old, high-pH groundwater, and more recent recharge of water from natural and/or engineered recharge processes. Along the southwest margin of the oil field, pumping for drinking-water and irrigation supplies in combination with engineered groundwater recharge produce a depression in groundwater elevations where groundwater with elevated sulfate concentrations from agricultural areas and groundwater with hydrocarbons from the oil field mix to produce a zone of sulfate reduction that removes hydrocarbons and arsenic from groundwater but produces elevated sulfide (S 2- ) concentrations (maximum concentration 29 mg per liter, mg/L). In this study, multiple approaches were required to resolve the overlapping effects of land uses, oil-field infrastructure, and natural processes on the distributions of hydrocarbons and arsenic in groundwater. The combined use of geographic, historical, physical, chemical, isotopic, and other information to constrain processes could be a useful approach for studies in other hydrocarbon-production areas. This is particularly important where land uses affect aquifer hydrology to an extent that causes mixing of groundwaters with different chemical compositions.

California↗

USGS2023

Groundwater quality near the Montebello Oil Field, Los Angeles County, California

Groundwater quality and potential sources and migration pathways of chemical constituents associated with hydrocarbon-bearing formations were assessed by the U.S. Geological Survey for the California State Water Resources Control Board Oil and Gas Regional Monitoring Program (RMP). Groundwater samples were collected as part of the RMP from 21 preexisting wells used for public supply, monitoring, or irrigation in and near the Montebello Oil Field and analyzed for constituents associated with hydrocarbon-bearing formations and constituents used to identify recently recharged groundwater and older groundwater. The newly collected RMP data were supplemented with historical sample data from 849 groundwater wells and analyzed with respect to explanatory factors that have the potential to influence water quality. Potential sources and migration pathways of fluids (water, gas, or oil) from hydrocarbon-bearing formations that could affect groundwater quality in the Montebello Oil Field include large volumes of recycled produced water (water withdrawn from an oil well and brought to the surface that may include oil, water, and gas from the geologic formation and water or gas injected for enhanced recovery) that have been reinjected since the 1960s to enhance oil production, oil and gas wells with well-integrity issues, and oil and gas wells with an uncemented annulus that intersects groundwater resource zones. Trace amounts of dissolved petroleum hydrocarbons, thermogenic gas (propane through pentane range), or both, were detected in seven groundwater samples collected in 2014 and 2018 as part of the RMP. Five of those samples also contained manufactured volatile organic compounds and at least some modern-age groundwater (recharged during or after 1953), indicating that the hydrocarbons could have originated from surficial, or shallow, sources unrelated to oil and gas development. Two samples contained low concentrations of petroleum hydrocarbons (less than 0.1 microgram per liter) and did not contain detections of manufactured volatile organic compounds in pre-modern groundwater. These samples were collected from relatively deep wells (greater than 140 meters below land surface) with perforations completed in marine sediments that may contain water with similar compositions to produced water. The RMP sample results and available historical data in and near the Montebello Oil Field did not provide conclusive evidence that oil and gas development has adversely affected groundwater resources. All samples with detectable petroleum hydrocarbons, thermogenic gases, or both, were collected from sites that also are within 500 meters of anthropogenic hydrocarbon sources not associated with oil and gas development or sources. In addition, naturally occurring sources of hydrocarbons that exist at intervals shallower than, or are in areas outside of, economically productive oil- and gas-producing zones could affect groundwater quality. A definitive analysis of relations of groundwater quality to potential anthropogenic and natural explanatory factors was not possible because of the low density of new and historical sampling data, particularly in parts of the Montebello Oil Field where the largest relative risks to groundwater from hydrocarbon-bearing formations exist. Areas to consider for more detailed monitoring and analysis in the future that may present the largest relative potential risks to groundwater quality include (1) areas downgradient from historical surface ponds and sumps and (2) areas with co-located high net injection (oil reservoir injection exceeds production), old oil and gas wells that may be more likely to develop well-integrity issues than newer wells, and oil and gas wells with uncemented boreholes intersecting groundwater zones. To help fill gaps resulting from sparse groundwater wells, temperature and resistivity borehole log data could be analyzed to locate anomalies that identify potential areas where relatively warm or saline water from deeper hydrocarbon-bearing formations is present in groundwater.

California↗

USGS2019

Petrologic and mineral physics database for use with the U.S. Geological Survey National Crustal Model

We present a petrologic and mineral physics database as part of the U.S. Geological Survey National Crustal Model (NCM). Each of 209 geologic units, 134 of which are currently part of the geologic framework within the NCM, was assigned a mineralogical composition according to generalized classifications with some refinement for specific geologic formations. This report is concerned with the petrology and mineral physics of each geologic unit within the NCM, which control the physical behavior of the solid mineral matrix within the rock. This mineral physics database builds on the work of Abers and Hacker to include 13 minerals specific to continental rock types. We explored the effect of this database on zero-porosity anharmonic P- and S-wave rock velocities and density relative to a well-used empirical study of relations between wavespeeds and density by Brocher. We found that empirical relations between P-wave velocity and S-wave velocity or density do well on average but can differ from mineral physics calculations by up to 15 percent in S-wave velocity and almost 40 percent in density. This is consistent with Brocher’s study where he obtained similar results for in situ measurements and laboratory rock specimens. Additionally, the substantial presence of quartz in many rocks plays a major role in crustal seismic velocities and density due to quartz’s α – β phase transition, which can interfere with these empirical relationships. With increasing depth, quartz P-wave velocity can suddenly jump by 15 percent accompanied by little change in S-wave velocity and a modest decrease in density. Empirical relations based on observed P-wave velocity where P-wave velocity is positively correlated with S-wave velocity and density would then significantly overestimate both S-wave velocity and density.

Open-File Report↗