Geology topics

T. Hudson

Publications and source records attributed to T. Hudson.

4 recordsLinked to original sources

USGS2022

Natural versus anthropogenic dispersion of metals to the environment in the Wulik River area, western Brooks Range, northern Alaska

Zinc-lead-silver mineral deposits in the Wulik River region, Alaska, contain an enormous accumulation of Zn. In addition to the giant deposits at Red Dog, at least nine other deposits are known. Natural weathering of these deposits has dispersed metals over a wide region over a long period of time (c. 10 000 years) through transport by stream and groundwater, stream sediments, formation of soils, and perhaps wind-blown atmospheric deposition from weathering of naturally enriched Pb-Zn surface deposits. Anthropogenic input also contributes metals to the environment. Mining of the Red Dog deposit, which began in 1989, produces fine-grained galena and sphalerite concentrates that are transported from the mine site by truck to a storage port facility. Wind-blown dispersion of concentrate dust along the road and around the port facility has been a source of local metal-rich surficial materials. Geochemical and mineralogical characteristics provide a means of distinguishing the natural versus anthropogenic metal sources. Soils over deposits have patterns of increasing metal contents with depth and proximity to the metal-bearing source, whereas ore concentrate dust is localized at the surface. The acidity produced by weathering of the sulphide deposits creates an environment in which elements such as Se and Mo are stable whereas Ca is not. Consequently, high Mo (up to 29 ppm) and Se (up to 17 ppm) and low Ca (<0.4%) concentrations characterize surficial materials near natural deposits. Acidic conditions also yield high Pb-Zn ratios (up to 70) because sphalerite is preferentially dissolved and Zn is mobilized during chemical weathering. In natural materials, secondary jarosite and anglesite are developed, and minor galena is etched and rounded due to a history of chemical and mechanical weathering. In contrast, dust-bearing samples have Pb/Zn ratios that are 0.4 or less, Ca contents are higher (0.2 to 3.6%), and Mo (<10 ppm) and Se (not detected) concentrations are low. Furthermore, galena and sphalerite grains are angular and secondary minerals are lacking. ?? 2007 AAG/Geological Society of London.

Geochemistry: Exploration, Environment, Analysis↗

USGS1983

Tin granites of Seward Peninsula, Alaska

Seven granite plutons, spatially and genetically related to tin metalization, are exposed in a 170-km-long belt across northwestern Seward Peninsula, Alaska. These plutons are cupolas and epizonal composite stocks that consist of several textural varieties of biotite granite, including medium- to coarse-grained seriate biotite granite, porphyritic biotite granite with an aplitic groundmass, and fine- to medium-grained equigranular biotite granite. The common accessory minerals are fluorite, allanite, apatite, and zircon. Other accessory minerals that are locally present include tourmaline, sphene, opaque oxide minerals, and late-forming (deuteric) muscovite and chlorite. The granites range in major-element contents as follows: SiO 2 , 72.5% to 76.6%; A1 2 O 3 , 12.7% to 14.3%; Na 2 O, 2.9% to 4.0%; K 2 O, 3.9% to 5.6%; and CaO, 0.6% to 1.2%. The sum of FeO + Fe 2 O 3 + MgO ranges from 0.3% to 2.4%; and the K 2 O to Na 2 O ratio from 1.1 to 1.8. The 0.1% to 0.9% F and 0.01% to 0.2% Cl reflect the over-all volatile-rich nature of the granites. The granites contain average or below-average concentrations of Co, Sc, Cr, and Zn, and generally above-average to distinctly high concentrations of Th, U, Hf, and Ta. The large cations emphasize the evolved nature of the granites; the Rb/Sr ratio is as high as 90 in some samples. Initial 87 Sr/ 86 Sr ratios range from 0.708 to as high as 0.720. The three Rb-Sr isochrons defined by the data agree with K-Ar age determinations and show that the stocks were emplaced during the Late Cretaceous, between about 70 and 80 m.y. ago. The field, petrologic, and geochemical data indicate that the plutons had a multistage origin that involved large-scale melting of sialic crust, emplacement of magmas derived from batholithic fractionation at depth, and subsequent evolution of these magmas to generate small volumes of more highly evolved residual magmas. Although evolution of the granite complexes was largely governed by crystal-melt fractionation, some minor-element variations in the highly evolved granites cannot be explained by this process. For example, the distribution of rubidium and the light rare-earths appears to have been influenced by volatile depletion at the final stages of crystallization. The field data, petrologic data, and variation trends, such as distinct shifts toward higher albite contents in the residual granites, suggest that the coexistence of a volatile phase was important in their evolution. These results require that models seeking to explain compositional gradients in high-level granite (rhyolite) systems fully consider the role of a coexisting volatile phase.

Alaska↗

USGS1981

Tonalites in crustal evolution

Tonalites, including trondhjemite as a variety, played three roles through geological time in the generation of Earth’s crust. Before about 2.9 Ga ago they were produced largely by simple partial melting of metabasalt to give the dominant part of Archaean grey gneiss terranes. These terranes are notably bimodal; andesitic rocks are rare. Tonalites played a crucial role in the generation of this protocontinental and oldest crust 3.7- 2.9 Ga ago in that they were the only low-density, high-SiO 2 rocks produced directly from basaltic crust. In the enormous event giving the greenstone-granite terranes, mostly 2.8-2.6 Ga ago, tonalites formed in lesser but still important proportions by partial melting of metabasalt in the lower regions of down-buckled greenstone belts and by remobilization of older grey gneisses. Tectonism in the Archaean (3.9- 2.5 Ga ago) perhaps was controlled by small-cell convection (McKenzie & Weiss 1975). Little or no ophiolite or eclogite formed, and only minor andesite. Plate tectonics of modern type (involving large, rigid plates) commenced in the early Proterozoic. Uniformitarianism thus goes back one-half of the age of the earth. Tonalites compose about 5-10 % of crust generated in Proterozoic and Phanerozoic time at convergent oceanic-continental margins. They occur here as minor to prominent members of the compositionally continuous continental-margin batholiths. A simple model of generation of these batholiths is offered: mantle-derived mafic magma pools in the lower crust above a subduction zone reacts with and incorporates wall-rock components (Bowen 1922), and breaches its roof rocks as an initial diapir. This mantle magma also develops a gradient of partial melting in its wall rocks. This wall-rock melt accretes in the collapsed chamber and moves up the conduit broached by the initial diapir, the higher, less siliceous fractions of melting first, the lower, more siliceous (and further removed) fractions of melting last. The process gives in the optimum case a mafic-to-siliceous sequence of diorite or quartz diorite through tonalite or quartz monzodiorite to granodiorite and granite. The model implies that great masses of cumulate phases and refractory wall rock form the roots of continentalmargin batholiths, and that migmatites overlie that residuum and underlie the batholiths.

Philosophical Transactions of the Royal Society A:↗

USGS1979

Petrology, composition, and age of intrusive rocks associated with the Quartz Hill molybdenite deposit, southeastern Alaska

A large porphyry molybdenum deposit (Quartz Hill deposit) was recently discovered in the heart of the Coast Range batholithic complex about 70 km east of Ketchikan, southeastern Alaska. Intrusive rocks associated with the mineral deposit form two composite epizonal to hypabyssal stocks and many dikes in country rocks. The stocks are characterized by a variety of textural rock types varying from equigranular or weakly seriate biotite granite to porphyries with aphanitic or very fine grained and aplitic groundmasses. These rocks contain about equal amounts of quartz, albitic plagioclase, and microperthitic microcline and less than 2.5% biotite. Unaltered rocks contain between 0.2 and 1% CaO, less than 1.7% combined Fe 2 O 3 , FeO, and MgO, and 74.4 to 77.7% SiO 2 . Total alkalis are between 8 and 9%, and K 2 O/Na 2 O is about 1.1. The range of major-oxide variation is small, but it is systematically related to lithology. Many trace-elements, including B, Pb, Sn, and Li have low concentrations. Intrusive rocks associated with the Quartz Hill deposit are more albitic and possibly trace-element depleted compared to some other rocks associated with porphyry molybdenum deposits.All observed metallization and alteration is within the Quartz Hill stock. Molybdenite forms fracture coatings and occurs in veins with quartz. Alteration is widespread and includes development of secondary quartz, pyrite, K-feldspar, biotite, white mica, chlorite, and zeolite. Field relations indicate that the stocks were emplaced after regional uplift and erosion of the Coast Range batholithic complex, and K–Ar data show that intrusion and alteration took place in late Oligocene time, about 27 to 30 Ma ago. Data from the Ketchikan quadrangle indicate that porphyry molybdenum metallization in the Coast Range batholithic complex is associated with regionally extensive but spotty, middle Tertiary or younger, felsic magmatism.

Alaska↗