Search USGS⌕ Search

Geology topics

Steven E. Ingebritsen

Publications and source records attributed to Steven E. Ingebritsen.

At least 19 recordsLinked to original sources

Geochemical monitoring of volcanic fluids in the twenty-first century

This chapter reviews the state-of-the-art of geochemical volcano monitoring techniques. We cover in-situ monitoring technologies that rely on sampling fluids (direct sampling) and on instrumental analysis of the composition of such fluids in real-time (remote sensing of volcanic fluids is covered elsewhere in this book). We first review key concepts and principles in the field, and then review the results of some selected case studies and applications. We cover the large variety of fluid categories emitted by volcanoes, in both the near-(crater fumaroles and lakes, and plumes) and far-(degassing soils, groundwaters) fields. Our aim is to demonstrate the utility of measuring the chemistry of fluids released by volcanoes, and how these can help characterize volcano unrest, and eventually the increased likelihood of eruption. We conclude with a brief discussion of current challenges and knowledge gaps, and on future directions in geochemical monitoring.

Book chapter↗

Review: The hydrogeology of critical mineral resources relevant to the energy transition

Attaining the goals of the international treaty on climate change (the Paris Agreement) will greatly increase the demand for the critical minerals required to implement clean-energy technologies. This poses both challenges and opportunities to the hydrogeologic community from several perspectives. Here, important insights that the hydrogeological sciences have to offer for mineral exploration, mineral production, and addressing environmental issues related to mining and mine decommissioning are summarized. This study focuses on copper, cobalt, lithium, and rare earths to represent the broad spectrum of critical minerals and illustrate their relevance by referring to projected demands and production rates. The current understanding of the hydrogeologic processes that form major deposits of these minerals are then summarized. Ore is defined as the naturally occurring material from which minerals of economic value can be extracted, where most ore deposits are the products of complex hydrogeologic couplings between fluid flow, heat transport, solute transport, chemical reactions, and mechanical deformation. Exploration models for the discovery of deeper, hidden deposits are potentially informed by hydrogeologic theory and hydrogeochemical processes. Hydrogeologic understanding and methods are also essential to production and recovery. Longstanding challenges are mine dewatering and (conversely) mine water supply, as well as mineral-extraction practices such as spoil heap leaching and in situ mining. New challenges arise from element extraction from subsurface brines. Finally, the quantity of water use and potential environmental impacts of mining on water quality are at the core of ‘social license’: the approval and acceptance of society to mining activities.

Hydrogeology Journal↗

Streams, springs, and volcanic lakes for volcano monitoring

Introduction Volcanic unrest can trigger appreciable change to surface waters such as streams, springs, and volcanic lakes. Magma degassing produces gases and soluble salts that are absorbed into groundwater that feeds streams and lakes. As magma ascends, the amount of heat and degassing will increase, and so will any related geochemical and thermal signal. Subsurface magma movement can cause pressurization that alters hydrostatic head and may induce groundwater discharge. Fluid-pressure changes have been linked to distal volcano-tectonic earthquakes (White and McCausland, 2016; Coulon and others, 2017) and phreatic eruptions (for example, Yamaoka and others, 2016). Clearly, changes in groundwater and surface waters are both indicators of unrest and clues to how and where magma is rising toward the surface. Where possible, it is prudent to incorporate real-time hydrologic data into multiparameter monitoring of restless volcanoes. Hydrologic dynamics can also be tracked by changes in groundwater levels that are commonly measured in shallow boreholes (see of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–K, 5 p., https://doi.org/10.3133/sir20245062k. ">chapter K , this volume, on boreholes; Hurwitz and Lowenstern, 2024). Although inferred to be common, relatively few volcano-hydrology anomalies are well documented, and many are essentially anecdotal (Newhall and others, 2001), reflecting the fact that high-resolution time series remain rare. Extreme examples include the 2008 eruption of Nevado del Huila, Colombia, where relatively minor phreatomagmatic eruptions were accompanied by expulsion of as much as 300 million cubic meters of groundwater from fissures high on the volcano (Worni and others, 2011), generating large lahars. Substantial decreases in flow rate from springs about 8 kilometers from the summit of Mayon Volcano, Philippines, have been noted before most eruptions in the 20th century (Newhall and others, 2001). Stream monitoring at Redoubt Volcano in 2009 allowed Werner and others (2012) to recognize that groundwater was unable to absorb (or scrub) the high flux of volcanic gas and that a high CO 2 /SO 2 precursor signal had been evident for 5 months prior to the eruption. A key to better interpreting hydrologic anomalies—or even identifying them—is therefore obtaining adequate baseline data. Most hydrologic monitoring at U.S. volcanoes has been accomplished by intermittent sampling surveys with annual or less frequent sampling (for example, https://hotspringchem.wr.usgs.gov/index.php ). More frequent sampling, however, generally is needed to establish reliable baselines. A recent hydrologic and hydrothermal monitoring experiment at 25 sites and 10 of the 12 level 4 (very high threat) volcanoes in the U.S. portion of the Cascade Range demonstrated that there is sufficient temporal variability in hydrothermal fluxes, even during quiescent periods, that one-time measurements will commonly have limited interpretive value (Crankshaw and others, 2018). Thus, surveys are best augmented with data from streamgages (for example, Evans and others, 2004; Bergfeld and others, 2008). Streamflow (water discharge) data allow measured temperature and specific conductance to be converted to heat and solute mass fluxes, which could be insightful parameters for detecting anomalous activity (McCleskey and others, 2012). At the Yellowstone Caldera, long-term monitoring of river solutes has allowed calculation of the chloride flux, a proxy for heat discharge (Hurwitz and others, 2007; McCleskey and others, 2016) from the subsurface magma. This is readily accomplished because data from streamgages are continuously recorded and archived by the U.S. Geological Survey (USGS) National Water Information System (NWIS) (USGS, 2024). Similar studies on stratovolcanoes or shield volcanoes would be scientifically useful, and yet are logistically challenging, requiring streamgages on numerous radial drainages complemented by either frequent manual sampling or numerous deployments of equipment to measure water temperature and specific conductance as a proxy for water chemistry. Another challenge is that some volcanic areas, especially shield volcanoes, are characterized by near-surface porous rocks and soils, such that surface streams are rare and replaced by distant, dilute large-volume springs with only a trace of any original volcanically sourced water (Manga, 2001; Hurwitz and others, 2021). Volcanic lakes are worthy of special attention for monitoring efforts, as their temperature and composition can provide evidence of increased flux of volatile-rich fluids from below. Quantifying changes in volatile and heat release from magma can be simpler in lakes than for volcanoes with radial drainages and no major lakes. Moreover, volcanic lakes pose a range of hazards themselves, including phreatomagmatic eruptions, debris flows, flank collapse, tsunamis, and toxic gas release (Mastin and Witter, 2000; Delmelle and others, 2015; Manville, 2015; Rouwet and others, 2015)—hazards that have historically been responsible for substantial loss of life at many volcanoes worldwide (Manville, 2015). Catastrophic CO 2 release at Lake Nyos, Cameroon, in 1986 suffocated about 1,750 people and about 3,500 livestock and was probably triggered by a large landslide into the gas-saturated lake (Kling and others, 1987; Evans and others, 1993). Gas-charged springs in Soda Bay within Clear Lake (California) have caused almost a dozen deaths to bathers in the past hundred years (ABC News, 2000). A 2005 example of lake overturn and abundant gas release was documented at Mount Chiginagak in Alaska (Schaefer and others, 2008) but did not result in any human casualties. Although thermally stratified lakes, which promote trapping of exsolved magmatic gas, tend to develop in tropical regions, the phenomenon can also arise where salinity creates meromixis (a condition in which a lake does not mix completely), as occurs in Mono Lake, California (Jellison and Melack, 1993; Jellison and others, 1998). If magma erupts or flows into a lake, the interaction between hot magma and cold water can be explosive (Mastin and others, 2004; Zimanowski and others, 2015) and substantially expand the area affected by the eruption. Another hazard is the breaching of crater rims by landslides triggered by volcanic and (or) seismic activity. Under some circumstances, substantial volumes of water can be displaced, leading to large floods and lahars. Late Holocene lake flooding from Aniakchak Crater in the Alaska Peninsula (Waythomas, 2022) and from Paulina Lake in Newberry Crater, Oregon (Chitwood and Jensen, 2000), caused by the failure of outlet sills, testify to the substantial hazards at lake-filled calderas. Several volcanic systems in the United States host lakes known to receive heat and gas from underlying magma. These lakes vary widely in area, depth, and chemical composition. Lakes are present at level 4 volcanoes, including Crater Lake and Newberry Volcano in Oregon; Yellowstone Caldera in Wyoming; Long Valley Caldera, Clear Lake volcanic field, Medicine Lake, and Salton Buttes in California; and Aniakchak Crater, Mount Katmai, Fisher Caldera, Mount Okmok, and Kaguyak Crater, among others, in Alaska. A water lake was present in Halemaʻumaʻu, the crater of Kīlauea, Hawai‘i (fig. F1), from October 2019 to December 2020. Level 3 volcanoes with lakes include Mono Lake volcanic field (Calif.), Mount Bachelor (Ore.), Ukinrek Maars and Mount Chiginagak (Alaska), and Soda Lake (Nevada). In addition, there are lakes at many levels 1 and 2 volcanoes. In the United States, there are no strongly acidic lakes that receive abundant input of magmatic gas, such as those found at Mount Ruapehu (New Zealand), Ijen and Kelud (Indonesia), and Poás (Costa Rica). Nevertheless, many contain fluids that provide clues to magmatic processes below. Since publication of a previous report on recommended instrumentation for volcano monitoring (Moran and others, 2008), continuous hydrologic monitoring has become increasingly feasible. However, changes in water pressure, temperature, and chemistry remain, in general, poorly studied phenomena at volcanoes (Sparks, 2003; National Academies of Sciences, Engineering, and Medicine, 2017). Recent efforts by the USGS have included the temporary study of Cascade Range volcanoes, which included frequent (15 minute to hourly) temporal sampling of temperature, depth, and conductivity (Crankshaw and others, 2018; Ingebritsen and Evans, 2019). At Yellowstone Caldera, many streamgages have now added thermistors and specific conductance sensors, allowing estimation of time-dependent chloride flux as a proxy for variations in subsurface heat flux (McCleskey and others, 2012, 2016). Efforts to better understand lakes have also accelerated, with bathymetric mapping and sampling carried out at several locations in the United States. Especially thorough work was done at Yellowstone Lake thanks to the Hydrothermal Dynamics of Yellowstone Lake (HD-YLAKE, https://hdylake.org ) project, funded primarily by the National Science Foundation. In addition to geophysical surveys and recovery of cores and other samples, HD-YLAKE investigations included remotely operated vehicle (ROV) investigations of hydrothermal vents on the lake floor (fig. F2). Data collected by the ROV provided a better understanding of the thermal and chemical influx from lake-bottom hydrothermal systems (Sohn and others, 2017). In this chapter, we focus on detecting changes in the chemistry, temperature, discharge, or water levels of streams, springs, and lakes that can be caused by seismicity, volumetric strains, or increases in gas flux associated with ascending magma. There is unavoidable overlap with other chapters of this report. Samples of water and gas can also be obtained in boreholes ( of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–K, 5 p., https://doi.org/10.3133/sir20245062k. ">chapter K , this volume; Hurwitz and Lowenstern, 2024), both shallow and deep. Gas monitoring ( of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–E, 11 p., https://doi.org/10.3133/sir20245062e.">chapter E , this volume; Lewicki and others, 2024) relies in part on samples from springs and wells, particularly where measurable gas plumes are absent. Water acts as a trigger and lubricant for landslides and sediment-rich floods, and so hydrology has obvious relevance for lahar monitoring, as discussed in of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–H, 6 p., https://doi.org/10.3133/sir20245062h. ">chapter H (this volume; Thelen and others, 2024). Shared situational awareness among scientists engaged in geophysical, gas, and hydrologic monitoring will improve overall understanding of the volcanic hazard.

Scientific Investigations Report↗

Geochemistry and fluxes of gases from hydrothermal features at Newberry Volcano, Oregon, USA

We present the chemical and isotopic compositions of gases and fluxes of CO 2 from the hydrothermal features of Newberry Volcano, a large composite volcano located in Oregon's Cascade Range with a summit caldera that hosts two lakes, Paulina and East Lakes. Gas samples were collected from 1982 to 2021 from Paulina Hot Springs (PHS) on the shore of Paulina Lake, East Lake Hot Springs (ELHS) on the shore of East Lake, and Obsidian Flow Gas Seep (OFGS), an area of diffuse gas emissions. Surveys of CO 2 flux were conducted in 2020 at OFGS (1400 m 2 ) and East Lake (4.1 km 2 ). Gases from all three sites were CO 2 -rich (≥79 mol% in dry gas) but showed considerable compositional variability over time due to interaction with ground and surface water. An increase in H 2 S concentrations and decline in CO 2 /H 2 S ratios in ELHS gases coincided with a drop in East Lake water level from 1999 to 2021. ELHS and OFGS gases were high in CH 4 relative to PHS and the δ 13 C of CH 4 values for ELHS gases (−72.2 and − 63.6 ‰) reflected a predominantly biogenic origin. The dominant source of N 2 and Ar in PHS, ELHS, and OFGS samples was likely groundwater. Helium isotopic ratios (6.47 to 8.02 R c /R a ) support a persistent source of magmatic He beneath Newberry caldera and consistently high values measured at OFGS and PHS relative to ELHS suggest distinct fluid flow paths from depth to the surface features. The δ 13 C of CO 2 and CO 2 / 3 He values (−8.9 to −5.35 ‰ and 1.3 × 10 9 to 4.6 × 10 10 , respectively) measured in gases reflect contributions of CO 2 from both mantle and crustal sources. Measured CO 2 fluxes at OFGS and East Lake ranged from 1 to 8808 and < 1 to 364 g m −2 d −1 , respectively. A CO 2 emission rate of 0.5 t d −1 was calculated for OFGS. The CO 2 emission rate estimated for East Lake was 30 t d −1 and when compared to prior estimates, reflects steady-state lake degassing. An enhanced geochemical monitoring plan, including annual sampling of gases at ELHS, OFGS, and PHS for geochemical analysis, installation of a continuous lake-level monitoring station at East Lake, and annual CO 2 flux surveys at OFGS, would provide valuable background data and insights into any precursor volcanic activity. Integrating geochemical data with data from the real-time seismic and GPS network at Newberry Volcano could better resolve and interpret potential changes in its magma-hydrothermal system.

Oregon↗

Violent groundwater eruption triggered by a distant earthquake

It is now well established that earthquakes cause various hydrogeological responses at distances thousands of kilometers from the epicenter. What remains unexplained is the large amplitude and intensity of some responses. Following the 2004 Mw 9.1 Sumatra earthquake, groundwater 3,200 km from the epicenter erupted violently from a well and formed a water fountain reaching a height exceeding 60 m. We model the relevant processes by combining tidal analysis of groundwater level with numerical simulations using a two-dimensional finite-element model. We suggest that the eruption resulted from a combination of factors, including a rapid increase of crustal permeability and runaway CO 2 exsolution and bubble nucleation induced by the passage of seismic waves. Our results may have implications for some engineering applications such as oil production and CO 2 sequestration, and the eruption of hydrothermal features such as geysers.

Geophysical Research Letters↗

Post audit of simulated groundwater flow to a short-lived (2019-2020) crater lake at Kīlauea Volcano

About 14.5 months after the 2018 eruption and summit collapse of Kīlauea Volcano, Hawaiʻi, liquid water started accumulating in the deepened summit crater, forming a lake that attained 51 m depth before rapidly boiling off on December 20, 2020, when an eruption from the crater wall poured lava into the lake. Modeling the growth of the crater lake at Kīlauea summit is important for assessing the potential for explosive volcanism. Our current understanding of the past 2500 years of eruptive activity at Kīlauea suggests a slight dominance of explosive behavior over effusive. The deepened summit crater and presence of the crater lake in 2019 raised renewed concerns about explosive activity. Groundwater models using hydraulic-property data from a nearby drillhole successfully forecast the timing and rate of lake filling. Here we compare the groundwater-model predictions with observational data through the demise of the crater lake, examine the implications for local water-table configuration, consider the potential role of evaporation and recharge (neglected in previous models), and briefly discuss the energetics of the rapid boil-off. This post audit of groundwater-flow models of Kīlauea summit shows that simple models can sometimes be used effectively to simulate complex settings such as volcanoes.

Hawaii↗

Groundwater dynamics at Kīlauea Volcano and vicinity, Hawaiʻi

Kīlauea Volcano, on the Island of Hawaiʻi, is surrounded and permeated by active groundwater systems that interact dynamically with the volcanic system. A generalized conceptual model of Hawaiian hydrogeology includes high-level dike-impounded groundwater, very permeable perched and basal aquifers, and a transition (mixing) zone between freshwater and saltwater. Most high-level groundwater is associated with the low-permeability intrusive complexes that underlie volcanic rift zones and calderas and also act to compartmentalize the groundwater system. Hydrogeologic studies of Kīlauea in recent decades, accompanied by deep research drilling, have shown that high-level groundwater is more widespread than once understood, that permeability decreases dramatically at depth, particularly in rift zones, and that freshwater can occur at depths of as much as several kilometers below the local water table. Copious groundwater recharge causes near-surface conductive heat flow to be near zero over much of Kīlauea. Approximately 95 percent of groundwater discharge occurs offshore, accompanied by approximately 99 percent of the approximately 6,000 megawatts of heat supplied by magmatic intrusion. Here, we summarize current understanding of the groundwater system of Kīlauea Volcano and describe transient changes during the decade or more preceding the 2018 eruption sequence. The changes in groundwater chemistry and thermal structure beneath Kīlauea summit hold implications for volcanic-volatile transport and the potential for explosive volcanism. Between 2008 and 2018, the magma conduit beneath the lava lake likely created an adjacent zone of very hot rock that significantly delayed liquid groundwater inflow to the draining magma conduit. Sulfate concentrations in groundwater beneath Kīlauea summit, sampled at the National Science Foundation-funded drill hole 1.5 kilometers south-southwest of the lava lake, declined substantially between 2010 and present. This decline likely reflects, at least in part, the decreased effectiveness of volatile condensation and solution into groundwater (scrubbing). The vent opening in 2008 presumably focused volatile flux into the vicinity of the vent, and progressive drying of the surroundings further restricted interaction with the groundwater system. The decrease in sulfate concentrations in the drill hole between 2010 and 2018 likely reflects decreased effectiveness of scrubbing.

Hawaii↗

Modeling groundwater inflow to the new crater lake at Kīlauea Volcano, Hawaiʻi

During the 2018 eruption of Kīlauea Volcano, Hawai'i, scientists relied heavily on a conceptual model of explosive eruptions triggered when lava‐lake levels drop below the water table. Numerical modeling of multiphase groundwater flow and heat transport revealed that, contrary to expectations, liquid water inflow to the drained magma conduit would likely be delayed by months to years, owing to the inability of liquid water to transit a zone of very hot rock. The summit of Kīlauea subsequently experienced an ∼2‐month period of consistent repeated collapses, and the crater now extends below the equilibrium position of the water table. Liquid water first emerged into the deepened crater in late July 2019. The timing of first appearance of liquid water (about 14 months postcollapse) and the rate of crater lake filling (currently ∼27 kg/s) were well‐predicted by the numerical modeling done in late spring 2018, which forecast liquid inflow after 3 to 24 months at rates of 10 to 100 kg/s. A second‐generation groundwater model, reflecting the current crater geometry, forecasts lake filling over the next several years. The successful 2018 to present forecasts with both models are based on unadjusted in situ permeability estimates (1 to 6 × 10 −14 m 2 ) and water‐table elevations (600 to 800 m) from a nearby research drillhole and geophysical surveys. Important unknowns that affect the reliability of longer‐term forecasts include the equilibrium water‐table geometry, the rate of evaporation from the hot and growing crater lake (currently ∼29,000 m 2 at 70‐80 °C), and heterogenous permeability changes caused by the 2018 collapse.

Hawaii↗

Groundwater inflow toward a preheated volcanic conduit: Application to the 2018 eruption at Kīlauea Volcano, Hawai’i

The many successes in volcano forecasting over the past several decades owe mainly to pattern recognition, both in monitoring data and the geologic record. During the early stages of the 2018 Kīlauea eruption, the conceptual model of Stearns (1925), based on the explosive 1924 Kīlauea eruption, was highly influential. This model postulates that explosions are triggered by liquid-water inflow into a recently vacated magma conduit. Modern quantitative modeling approaches, supplemented by hydrogeologic data unavailable in 1925, yield a more nuanced view. Results demonstrate that liquid-water inflow would likely be delayed by months to years, owing to the inability of liquid water to transit a zone of very hot rock surrounding the conduit. The exercise demonstrates the use of physically based modeling to supplement traditional volcano-forecasting approaches during an ongoing event.

Hawaii↗

Potential for increased hydrothermal arsenic flux during volcanic unrest: Implications for California water supply

The hydrothermal systems associated with the restless high-threat volcanoes at Lassen and Long Valley, California, each release large amounts of arsenic (As) to surface waters – ~6 and ~8 metric tons/yr, respectively. The hydrothermal As output can increase during volcanic unrest, as illustrated by a two-fold increase during unrest at Lassen in 2014–15. During that period of unrest, increased As concentrations and fluxes were measured up to 75 km downstream from the Lassen source, in Mill Creek near the confluence with the Sacramento River. In eastern California, the Long Valley hydrothermal system feeds into the Los Angeles Aqueduct (LAA), and the Los Angeles Department of Water and Power (LADWP) actively manages the LAA system to remove hydrothermal As. In 1980, during a series of ~ M w 6 earthquakes, the discharge of a particular group of hydrothermal vents in Long Valley increased approximately 7-fold, though the total increase in As flux to the LAA system at that time is unknown. The likely mechanism for increased hydrothermal discharge in each case is permeability enhancement due to strong ground motion. A review of the global literature on earthquake hydrology suggests a worst-case scenario of a roughly 10-fold increase in permeability, with commensurate increase in the hydrothermal As flux persisting for days to months. Here we evaluate the potential impact of such increases in hydrothermal As flux on the California water-supply system.

California↗

The influence of episodic shallow magma degassing on heat and chemical transport in volcanic hydrothermal systems

Springs at La Soufrière of Guadeloupe have been monitored for nearly four decades since the phreatic eruption and associated seismic activity in 1976. We conceptualize degassing vapor/gas mixtures as square‐wave sources of chloride and heat and apply a new semianalytic solution to demonstrate that chloride and heat pulses with the same timing and duration result in good matches between measured and simulated spring temperatures and concentrations. While the concentration of chloride pulses is variable, the local boiling temperature of 96°C was assigned to all thermal pulses. Because chloride is a conservative tracer, chloride breakthrough is only affected by one‐dimensional advection and dispersion. The thermal tracer is damped and lagged relative to chloride due to conductive heat exchange with the overlying and underlying strata. Joint analysis of temperature and chloride allows estimation of the onset and duration of degassing pulses, refining the chronology of recent magmatic intrusion.

Geophysical Research Letters↗

Multi-year high-frequency hydrothermal monitoring of selected high-threat Cascade Range volcanoes

From 2009 to 2015 the U.S. Geological Survey (USGS) systematically monitored hydrothermal behavior at selected Cascade Range volcanoes in order to define baseline hydrothermal and geochemical conditions. Gas and water data were collected regularly at 25 sites on 10 of the highest-risk volcanoes in the Cascade Range. These sites include near-summit fumarole groups and springs/streams that show clear evidence of magmatic influence (high 3 He/ 4 He ratios and/or large fluxes of magmatic CO 2 or heat). Site records consist mainly of hourly temperature and hydrothermal-flux data. Having established baseline conditions during a multiyear quiescent period, the USGS reduced monitoring frequency from 2015 to present. The archived monitoring data are housed at (doi:10.5066/F72N5088). These data (1) are suitable for retrospective comparison with other continuous geophysical monitoring data and (2) will provide context during future episodes of volcanic unrest, such that unrest-related variations at these thoroughly characterized sites will be more clearly recognizable. Relatively high-frequency year-round data are essential to achieve these objectives, because many of the time series reveal significant diurnal, seasonal, and inter-annual variability that would tend to mask unrest signals in the absence of baseline data. Here we characterize normal variability for each site, suggest strategies to detect future volcanic unrest, and explore deviations from background associated with recent unrest.

California, Oregon, Washington↗

Crustal permeability

Permeability is the dominant parameter in most hydrogeologic studies. There is abundant evidence for dynamic variations in permeability in time as well as space, and throughout the crust. Whether this dynamic behavior should be included in quantitative models depends on the problem at hand.

Hydrogeology Journal↗

Thermal effect of climate change on groundwater-fed ecosystems

Groundwater temperature changes will lag surface temperature changes from a changing climate. Steady state solutions of the heat-transport equations are used to identify key processes that control the long-term thermal response of springs and other groundwater discharge to climate change, in particular changes in (1) groundwater recharge rate and temperature and (2) land-surface temperature transmitted through the vadose zone. Transient solutions are developed to estimate the time required for new thermal signals to arrive at ecosystems. The solution is applied to the volcanic Medicine Lake highlands, California, USA, and associated springs complexes that host groundwater-dependent ecosystems. In this system, upper basin groundwater temperatures are strongly affected only by recharge conditions. However, as the vadose zone thins away from the highlands, changes in the average annual land-surface temperature also influence groundwater temperatures. Transient response to temperature change depends on both the conductive time scale and the rate at which recharge delivers heat. Most of the thermal response of groundwater at high elevations will occur within 20 years of a shift in recharge temperatures, but the large lower elevation springs will respond more slowly, with about half of the conductive response occurring within the first 20 years and about half of the advective response to higher recharge temperatures occurring in approximately 60 years.

California↗

Potentially exploitable supercritical geothermal resources in the ductile crust

The hypothesis that the brittle–ductile transition (BDT) drastically reduces permeability implies that potentially exploitable geothermal resources (permeability >10 −16 m 2 ) consisting of supercritical water could occur only in rocks with unusually high transition temperatures such as basalt. However, tensile fracturing is possible even in ductile rocks, and some permeability–depth relations proposed for the continental crust show no drastic permeability reduction at the BDT. Here we present experimental results suggesting that the BDT is not the first-order control on rock permeability, and that potentially exploitable resources may occur in rocks with much lower BDT temperatures, such as the granitic rocks that comprise the bulk of the continental crust. We find that permeability behaviour for fractured granite samples at 350–500 °C under effective confining stress is characterized by a transition from a weakly stress-dependent and reversible behaviour to a strongly stress-dependent and irreversible behaviour at a specific, temperature-dependent effective confining stress level. This transition is induced by onset of plastic normal deformation of the fracture surface (elastic–plastic transition) and, importantly, causes no ‘jump’ in the permeability. Empirical equations for this permeability behaviour suggest that potentially exploitable resources exceeding 450 °C may form at depths of 2–6 km even in the nominally ductile crust.

Nature Geoscience↗

Causes of distal volcano-tectonic seismicity inferred from hydrothermal modeling

Distal volcano-tectonic (dVT) seismicity typically precedes eruption at long-dormant volcanoes by days to years. Precursory dVT seismicity may reflect magma-induced fluid-pressure pulses that intersect critically stressed faults. We explored this hypothesis using an open-source magmatic-hydrothermal code that simulates multiphase fluid and heat transport over the temperature range 0 to 1200 °C. We calculated fluid-pressure changes caused by a small (0.04 km 3 ) intrusion and explored the effects of flow geometry (channelized vs. radial flow), magma devolatilization rates (0–15 kg/s), and intrusion depths (5 and 7.5 km, above and below the brittle-ductile transition). Magma and host-rock permeabilities were key controlling parameters and we tested a wide range of permeability ( k ) and permeability anisotropies ( k h / k v ), including k constant, k ( z ), k ( T ), and k ( z , T , P ) distributions, examining a total of ~ 1600 realizations to explore the relevant parameter space. Propagation of potentially causal pressure changes (Δ P ≥ 0.1 bars) to the mean dVT location (6 km lateral distance, 6 km depth) was favored by channelized fluid flow, high devolatilization rates, and permeabilities similar to those found in geothermal reservoirs ( k ~ 10 − 16 to 10 − 13 m 2 ). For channelized flow, magma-induced thermal pressurization alone can generate cases of ∆ P ≥ 0.1 bars for all permeabilities in the range 10 − 16 to 10 − 13 m 2 , whereas in radial flow regimes thermal pressurization causes ∆ P < 0.1 bars for all permeabilities. Changes in distal fluid pressure occurred before proximal pressure changes given modest anisotropies ( k h / k v ~ 10–100). Invoking k ( z , T , P ) and high, sustained devolatilization rates caused large dynamic fluctuations in k and P in the near-magma environment but had little effect on pressure changes at the distal dVT location. Intrusion below the brittle-ductile transition damps but does not prevent pressure transmission to the dVT site.

Journal of Volcanology and Geothermal Research↗

Special issue “The phreatic eruption of Mt. Ontake volcano in 2014”

Mt. Ontake volcano erupted at 11:52 on September 27, 2014, claiming the lives of at least 58 hikers. This eruption was the worst volcanic disaster in Japan since the 1926 phreatic eruption of Mt. Tokachidake claimed 144 lives (Table 1 ). The timing of the eruption contributed greatly to the heavy death toll: near midday, when many hikers were near the summit, and during a weekend of clear weather conditions following several rainy weekends. The importance of this timing is reflected by the fact that a somewhat larger eruption of Mt. Ontake in 1979 resulted in injuries but no deaths. In 2014, immediate precursors were detected with seismometers and tiltmeters about 10 min before the eruption, but the eruption started before a warning was issued.

Earth, Planets and Space↗

Dynamics of permeability evolution in stimulated geothermal reservoirs

Spatially and temporally evolving permeability fields are fundamentally associated with the operation of enhanced geothermal systems. This chapter explores the resulting magnitude and patterns of permeability alteration as well as the coupled physical processes that control the evolution of permeability during shear stimulation and long-term evolution of a geothermal reservoir. It also explores mechanisms involved in the enhancement of fracture permeability, targeting injection pressures that encourage self-propping shear stimulation alongside elastic pressure and thermal dilatation of fracture sets. Simulation of a short-term, high-injection-rate enhanced geothermal system stimulation explored the importance of hydraulic versus thermal effects and the impact of a temperature differential between fluid in the fractures and the adjoining rock matrix. The effects of variations in fracture spacing on the evolution of permeability is at least as important as the magnitude of initial permeability, and quantifying the driving mechanisms is critical to understanding reservoir response.

Book chapter↗