Search USGS⌕ Search

Geology topics

Steve Ludington

Publications and source records attributed to Steve Ludington.

At least 19 recordsLinked to original sources
USGS2017

Geology and undiscovered resource assessment of the potash-bearing Pripyat and Dnieper-Donets Basins, Belarus and Ukraine

Undiscovered potash resources in the Pripyat Basin, Belarus, and Dnieper-Donets Basin, Ukraine, were assessed as part of a global mineral resource assessment led by the U.S. Geological Survey (USGS). The Pripyat Basin (in Belarus) and the Dnieper-Donets Basin (in Ukraine and southern Belarus) host stratabound and halokinetic Upper Devonian (Frasnian and Famennian) and Permian (Cisuralian) potash-bearing salt. The evaporite basins formed in the Donbass-Pripyat Rift, a Neoproterozoic continental rift structure that was reactivated during the Late Devonian and was flooded by seawater. Though the rift was divided, in part by volcanic deposits, into the separate Pripyat and Dnieper-Donets Basins, both basins contain similar potash‑bearing evaporite sequences. An Early Permian (Cisuralian) sag basin formed over the rift structure and was also inundated by seawater resulting in another sequence of evaporite deposition. Halokinetic activity initiated by basement faulting during the Devonian continued at least into the Permian and influenced potash salt deposition and structural evolution of potash-bearing salt in both basins. Within these basins, four areas (permissive tracts) that permit the presence of undiscovered potash deposits were defined by using geological criteria. Three tracts are permissive for stratabound potash-bearing deposits and include Famennian (Upper Devonian) salt in the Pripyat Basin, and Famennian and Cisuralian (lower Permian) salt in the Dnieper-Donets Basin. In addition, a tract was delineated for halokinetic potash-bearing Famennian salt in the Dnieper-Donets Basin. The Pripyat Basin is the third largest source of potash in the world, producing 6.4 million metric tons of potassium chloride (KCl) (the equivalent of about 4.0 million metric tons of potassium oxide or K 2 O) in 2012. Potash production began in 1963 in the Starobin #1 mine, near the town of Starobin, Belarus, in the northwestern corner of the basin. Potash is currently produced from six potash mines in the Starobin area. Published reserves in the Pripyat Basin area are about 7.3 billion metric tons of potash ore (about 1.3 billion metric tons of K 2 O) mostly from potash-bearing salt horizons in the Starobin and Petrikov mine areas. The 15,160-square-kilometer area of the Pripyat Basin underlain by Famennian potash-bearing salt contains as many as 60 known potash-bearing salt horizons. Rough estimates of the total mineral endowment associated with stratabound Famennian salt horizons in the Pripyat Basin range from 80 to 200 billion metric tons of potash-bearing salt that could contain 15 to 30 billion metric tons of K 2 O. Parameters (including the number of economic potash horizons, grades, and depths) for these estimates are not published so the estimates are not easily confirmed. Historically, reserves have been estimated above a depth of 1,200 meters (m) (approximately the depths of conventional underground mining). Additional undiscovered K 2 O resources could be significantly greater in the remainder of the Fammenian salt depending on the extents and grades of the 60 identified potash horizons above the USGS assessment depth of 3,000 m in the remainder of the tract. Increasing ambient temperatures with increasing depths in the eastern parts of the Pripyat Basin may require a solution mining process which is aided by higher temperatures. No resource or reserve data have been published and little is known about stratabound Famennian and Frasnian salt in the Dnieper-Donets Basin. These Upper Devonian salt units dip to the southeast and extend to depths of 15–19 kilometers (km) or greater. The tract of stratabound Famennian salt that lies above a depth of 3 km, the depth above which potash is technically recoverable by solution mining, underlies an area of about 15,600 square kilometers (km 2 ). If Upper Devonian salt units in the Dnieper-Donets Basin contain potash-bearing strata similar to salt of the same age in the Pripyat Basin, then the stratabound Famennian tract in the Dnieper-Donets Basin could contain significant undiscovered potash resources. The Cisuralian evaporite sequence in the Dnieper-Donets Basin consists of 10 evaporite cycles with the upper 3 cycles containing potash-bearing salt (mainly as sylvite and carnallite) in several subbasins and polyhalite in the sulfate bearing parts of the identified tract. The area of the Cisuralian tract is 62,700 km 2 . Potash-bearing cycles are as much as 40 m thick. One subbasin is reported to contain 794 million metric tons of “raw or crude” potash-bearing salt which could contain 50 to 150 million metric tons of K 2 O, depending on the grade. Undiscovered potash resources in the remainder of this permissive tract may be significantly greater. Depths to the Permian salt range from less than 100 to about 1,500 m. Undiscovered resources of halokinetic potash-bearing salt in the Dnieper-Donets Basin were assessed quantitatively for this study by using the standard USGS three-part form of mineral resource assessment (Singer, 2007a; Singer and Menzie, 2010). Delineation of the permissive tract was based on distributions of mapped halokinetic salt structures. This tract contains at least 248 diapiric salt structures with a total area of 7,840 km 2 that occupies approximately 8 percent of the basin area. The vertical extent of these salt structures is hundreds of meters to several kilometers. This assessment estimated that a total mean of 11 undiscovered deposits contain an arithmetic mean estimate of about 840 million metric tons of K 2 O in the halokinetic salt structures of the Dnieper-Donets Basin for which the probabilistic estimate was made.

Dnieper-Donets Basin, Pripyat Basin↗
USGS2013

Porphyry copper assessment of Southeast Asia and Melanesia: Chapter D in Global mineral resource assessment

The U.S. Geological Survey collaborated with member countries of the Coordinating Committee for Geoscience Programmes in East and Southeast Asia (CCOP) on an assessment of the porphyry copper resources of Southeast Asia and Melanesia as part of a global mineral resource assessment. The region hosts world-class porphyry copper deposits and underexplored areas that are likely to contain undiscovered deposits. Examples of known porphyry copper deposits include Batu Hijau and Grasberg in Indonesia; Panguna, Frieda River, and Ok Tedi in Papua New Guinea; and Namosi in Fiji. This assessment covers the countries of Cambodia, Indonesia, Lao People&rsquo;s Democratic Republic, Malaysia, Myanmar, Papua New Guinea, Singapore, Thailand, and parts of southeastern China, India, the Solomon Islands, Vanuatu, and Fiji. Twenty-two geographic areas were delineated as tracts that are permissive for porphyry copper deposits in Southeast Asia. Permissive tracts are grouped into four broadly defined geographic/geologic areas, as follows: (1) the Indochina Peninsula area, (2) Indonesian and Malaysian Islands, (3) New Guinea Island and Papuan New Guinea islands, and (4) Melanesia. Individual tracts range from less than 1,000 to more than 350,000 square kilometers in area. Permissive tracts are based on mapped and inferred subsurface (<1 kilometer depth) distributions of igneous rocks of specific age ranges that define magmatic arcs and magmatic belts that are likely to contain porphyry copper deposits. Most of these magmatic arcs are subduction-related, although some have porphyry-style deposits occurring in postcollisional and (or) poorly understood tectonic settings. Although maps at a variety of different scales were used in the compilation, the final tract boundaries are intended for use at a scale of 1:1,000,000. Global grade and tonnage models for porphyry copper deposits were evaluated. Most of the known deposits are best described as fitting the copper-gold (Cu-Au) subtype of porphyry copper deposit. For some permissive tracts, a general porphyry copper-gold-molybdenum (Cu-Au-Mo) model was used. Assessment participants estimated numbers of undiscovered deposits at different levels of confidence for most of the permissive tracts. These estimates were combined with grade and tonnage models using a Monte Carlo simulation to estimate undiscovered resources. Additional resources in extensions of deposits with identified resources were not evaluated. Assessment results, presented in tables and graphs, show mean amounts of metal and mineralized rock in undiscovered deposits at different quantile levels, as well as the arithmetic mean for each tract. This assessment estimated a mean of 89 undiscovered porphyry copper deposits for the assessed permissive tracts in Southeast Asia and Melanesia. About 288 million metric tons (Mt) of copper and 18,000 metric tons (t) of gold, as well as byproduct molybdenum and silver, could be associated with undiscovered deposits. This represents about four times the number of deposits with identified resources (23) already discovered in Southeast Asia; reliable reported identified resources for those 23 deposits total 84 Mt of copper and 6,000 t of gold. Eleven permissive tracts have no known porphyry copper deposits with reported resources. Three of those 11 tracts lacked sufficient information for a probabilistic assessment and are discussed in qualitative terms. On a regional basis, both the Indochina Peninsula area and the Indonesian-Malaysian Islands area are estimated to contain about 10 times as much in place copper in undiscovered porphyry copper deposits as has been identified to date. For the New Guinea Island areas, the ratio of undiscovered to identified copper resources is about 2. Some parts of the region have a long history of porphyry exploration cycles and mine development, interrupted at times by political and social unrest, environmental concerns, and natural disasters. Changes in mining laws within the region and the recent high price of gold on the world market have prompted renewed interest in porphyry copper deposits in Southeast Asia and Melanesia. However, predicted undiscovered deposits may not be found, and if found, may not be developed. This assessment includes an overview of the assessment results with summary tables. Detailed descriptions of each tract are included in appendixes, with estimates of numbers of undiscovered deposits, and probabilistic estimates of amounts of copper, molybdenum, gold, and silver that could be contained in undiscovered deposits for each permissive tract. A geographic information system (GIS) that accompanies the report includes tract boundaries and a database of known porphyry copper deposits and significant prospects.

Scientific Investigations Report↗
USGS2012

Porphyry copper assessment of the Tibetan Plateau, China: Chapter F in Global mineral resource assessment

The U.S. Geological Survey collaborated with the China Geological Survey to conduct a mineral-resource assessment of resources in porphyry copper deposits on the Tibetan Plateau in western China. This area hosts several very large porphyry deposits, exemplified by the Yulong and Qulong deposits, each containing at least 7,000,000 metric tons (t) of copper. However, large parts of the area are underexplored and are likely to contain undiscovered porphyry copper deposits. Three tracts were delineated as permissive for porphyry copper deposits on the Tibetan Plateau&mdash;the Yulong (Eocene and Oligocene), Dali (Eocene through Miocene), and Gangdese (Oligocene and Miocene) tracts. The tracts were defined based on mapped and inferred subsurface distributions of igneous rocks of specific age ranges in which the occurrence of porphyry copper deposits is possible. These tracts range in area from about 95,000 to about 240,000 square kilometers. Although maps of different scales were used in the assessment, the final tract boundaries are intended for use at a scale of 1:1,000,000. The deposits on the Tibetan Plateau all formed in a post-subduction environment, one newly recognized as permissive for the occurrence of porphyry copper deposits. Based on the grade, tonnage, and geologic characteristics of the known deposits, two tracts, Yulong and Gangdese, were evaluated using the general (Cu-Mo-Au) porphyry copper grade and tonnage model. The Dali tract was evaluated using the gold-rich (Cu-Au) submodel. Assessment participants estimated numbers of undiscovered deposits at different levels of confidence for each permissive tract. These estimates were then combined with the selected grade and tonnage models using Monte Carlo simulation to generate quantitative probabilistic estimates of undiscovered resources. Additional resources in extensions of deposits with identified resources were not specifically evaluated. Assessment results, presented in tables and graphs, show mean expected amounts of metal and rock in undiscovered deposits at different quantile levels, as well as the arithmetic mean for each tract. This assessment estimated a mean of 39 undiscovered porphyry copper deposits within the assessed permissive tracts on the Tibetan Plateau. This represents nearly four times the number of known deposits (11) already discovered. Predicted mean (arithmetic) resources that could be associated with the undiscovered deposits are about 145,000,000 t of copper and about 4,900 t of gold, as well as byproduct molybdenum and silver. Reliable reports of the identified resources in the 11 known deposits total about 27,000,000 t of copper and about 800 t of gold. Therefore, based on the assessments of undiscovered Tibetan Plateau resources in this report, about six times as much copper may occur in undiscovered porphyry copper deposits as has been identified to date.

Tibetan Plateau↗
USGS2012

Porphyry copper assessment of the Mesozoic of East Asia: China, Vietnam, North Korea, Mongolia, and Russia: Chapter G in Global mineral resource assessment

The U.S. Geological Survey (USGS) collaborated with the China Geological Survey (CGS) to conduct a mineral resource assessment of Mesozoic porphyry copper deposits in East Asia. This area hosts several very large porphyry deposits, exemplified by the Dexing deposit in eastern China that contains more than 8,000,000 metric tons of copper. In addition, large parts of the area are undergoing active exploration and are likely to contain undiscovered porphyry copper deposits. Three tracts were delineated to be permissive for Mesozoic porphyry copper deposits in East Asia: the Manchuride, Coastal Pacific, and East Qinling tracts, all Jurassic through Cretaceous in age. The tracts are based on mapped and inferred subsurface distributions of igneous rocks that define areas where the occurrence of porphyry copper deposits is possible. These tracts range in area from about 170,000 to about 1,400,000 km 2 . Although maps at a variety of scales were used in the assessment, the final tract boundaries are intended for use at a scale of 1:1,000,000. These Mesozoic deposits in East Asia all formed in post-subduction environments, environments newly recognized as permissive for the occurrence of porphyry copper deposits. Based on the grade, tonnage, and geologic characteristics of the known deposits, two tracts, Manchuride and Coastal Pacific, were evaluated using the general (Cu-Mo-Au) porphyry copper grade and tonnage model. The East Qinling tract was evaluated using the molybdenum-rich (Cu-Mo) model. Assessment participants estimated numbers of undiscovered deposits at different levels of confidence for each permissive tract. These estimates were then combined with the selected grade and tonnage models using Monte Carlo simulation to generate quantitative probabilistic estimates of undiscovered resources. Resources in future extensions of deposits with identified resources were not specifically evaluated. Assessment results, presented in tables and graphs, show mean amounts of metal and rock in undiscovered deposits at different quantile levels, as well as the arithmetic mean for each tract. This assessment estimated a mean total of about 44 undiscovered porphyry copper deposits within the assessed permissive tracts in East Asia. This represents nearly 4 times the 12 known deposits. Predicted mean (arithmetic) resources that could be associated with these undiscovered deposits are about 198,000,000 metric tons (t) of copper and about 3,900 t of gold, as well as byproduct molybdenum and silver. The reported identified resources for those 12 known deposits total about 23,000,000 t of copper and about 850 t of gold. The assessment area is estimated to contain nearly nine times as much copper in undiscovered porphyry copper deposits as has been identified to date. This report includes an overview of the assessment results and summary tables. Descriptions of each tract are included in appendixes, with estimates of numbers of undiscovered deposits, and probabilistic estimates of amounts of copper, molybdenum, gold, and silver that could be contained in undiscovered deposits for each permissive tract. A geographic information system that accompanies the report includes tract boundaries and a database of known porphyry copper deposits and prospects.

Scientific Investigations Report↗
USGS2011

Porphyry copper assessment of British Columbia and Yukon Territory, Canada: Chapter C in Global mineral resource assessment

The U.S. Geological Survey does regional, national, and global assessments of resources (mineral, energy, water, biologic) to provide science in support of land management and decision making. Mineral resource assessments provide a synthesis of available information about where mineral deposits are known and suspected to be in the Earth&rsquo;s crust, which commodities may be present, and estimates of amounts of resources that may be present in undiscovered deposits. Canada is an important source of copper, consistently ranking as one of the top 10 world producers during the past decade (2000&ndash;2010). The preponderance of this production has been from porphyry-copper-type deposits in the western Canadian Cordillera. A probabilistic mineral resource assessment of undiscovered resources associated with porphyry copper deposits in western Canada was completed as part of a global mineral resource assessment. The purpose of the assessment was to (1) compile a database of known deposits and significant prospects, (2) delineate permissive areas (tracts) for undiscovered porphyry copper deposits that may be present in the upper kilometer (minimally) of the Earth&rsquo;s crust, and (3) provide probabilistic estimates of amounts of copper (Cu), molybdenum (Mo), gold (Au), and silver (Ag) that could be contained in undiscovered porphyry copper deposits in the tracts. The study was done by the U.S. Geological Survey (USGS) in collaboration with geologists from the British Columbia Geological Survey, Yukon Geological Survey, and industry consultants. The database of known deposits and significant prospects includes an inventory of mineral resources in 89 known porphyry copper (and 2 related copper-bearing polymetallic vein) ore zones, representing 50 porphyry copper deposits, and lists key characteristics of 280 additional porphyry copper and related copper-bearing prospects, as indicated by currently available exploration results, which also are summarized. Resource and exploration and development activity are updated with information current through April 2010. The delineation of permissive tracts and probabilistic estimation of resources in undiscovered deposits were done using the USGS three-part mineral resource assessment approach. Permissive tracts are defined in accordance with descriptive models for porphyry copper deposits to include igneous rocks and known deposits and prospects within magmatic arcs related to convergent plate-margin boundary zones. Frequency distributions of total tonnages and average grades of thoroughly explored deposits were used as models for undiscovered deposits and include a new grade and tonnage model for calc-alkaline porphyry Cu&plusmn;Mo&plusmn;Au deposits in western Canada. Five permissive tracts for the occurrence of porphyry copper deposits were delineated: 2 island-arc tracts, 1 tract of transitional, mixed island-arc and continental arc affinities, and 2 continental arc tracts. In permissive tract 003pCu2001, calc-alkaline igneous rocks of Middle Triassic to Late Jurassic age in accreted island-arc terranes of the Intermontane belt are assessed for calc-alkaline porphyry Cu&plusmn;Mo&plusmn;Au deposits. The area of this tract is 175,250 km 2 . In 12 known deposits, the total reported tonnage of ore is 8,100 million metric tons (Mt) containing 24.6 Mt copper. An estimated 6.9 undiscovered deposits contain a calculated mean of 8.9 Mt copper and a median of 6.9 Mt copper. The spatial density for the 18.9 known plus estimated undiscovered deposits in this tract is approximately 11 deposits per 100,000 km 2 . In permissive tract 003pCu2002, alkaline igneous rocks of Middle Triassic to Late Jurassic age within the Intermontane accreted island-arc terranes are assessed for alkaline porphyry Cu-Au deposits. The area of this tract is 109,290 km 2 . In 12 known deposits the total reported tonnage of ore is 6,440 Mt, containing 20.9 Mt copper. An estimated 7 undiscovered deposits contain a calculated mean of 22 Mt copper and a median of 13 Mt copper. The spatial density for the 19 known plus estimated undiscovered deposits in this tract is approximately 17 deposits per 100,000 km 2 . In permissive tract 003pCu2003, calc-alkaline igneous rocks of Late Triassic to Early Cretaceous age within the accreted Insular terranes of mixed island-arc and continental arc affinities are assessed for calc-alkaline porphyry Cu&plusmn;Mo&plusmn;Au deposits. The area of this tract is 58,360 km 2 . The total tonnage of ore reported in the 2 known deposits is 1,160 Mt containing 3.17 Mt copper. An estimated 2.3 undiscovered deposits contain a calculated mean of 3 Mt copper and a median of 1.9 Mt copper. The spatial density for the 4.3 known plus estimated undiscovered deposits in this tract is approximately 7 deposits per 100,000 km 2 . In permissive tract 003pCu2004, calc-alkaline igneous rocks in continental magmatic arcs of Jurassic to Eocene age are assessed for porphyry Cu&plusmn;Mo&plusmn;Au deposits. The area of this tract is 639,500 km 2 . The total tonnage of ore reported for the 23 known deposits is 6,520 Mt containing 17.9 Mt copper. An estimated 9.6 undiscovered deposits contain a calculated mean of 13 Mt copper and a median of 11 Mt copper. The spatial density for the 32.6 known deposits plus the estimated undiscovered deposits in this tract is approximately 5 deposits per 100,000 km 2 . In permissive tract 003pCu2005, calc-alkaline igneous rocks in continental magmatic arcs of Oligocene to Pliocene age are assessed for porphyry Cu&plusmn;Mo&plusmn;Au deposits. The area of this tract is 32,840 km 2 . The total tonnage of ore reported for the 1 known deposit is 44.8 Mt containing 0.224 Mt copper. An estimated 1.4 undiscovered deposits contain a calculated mean of 1.8 Mt copper and a median of 0.72 Mt copper. The spatial density for the 2.4 known plus estimated undiscovered deposits in this permissive tract is approximately 7 deposits per 100,000 km 2 . Western Canada has been thoroughly explored for porphyry copper deposits. The total estimated copper contained in known deposits is about 66.8 Mt (based on 2010 data), as compared to a 49 Mt mean of estimated copper in undiscovered deposits and a 34 Mt median of estimated copper in undiscovered deposits. The copper contained in known porphyry copper deposits represents about 58 percent of the total of known and undiscovered porphyry copper deposits (based on mean values). About 86 percent of the increase in estimated copper resources between 1993 and 2009 resulted from the discovery of extensions to known deposits. Nevertheless, exploration for undiscovered deposits continues, especially in and around significant prospects and in parts of permissive tracts that are mostly hidden beneath younger volcanic, sedimentary, or vegetated surficial cover.

British Columbia, Yukon Territory↗
USGS2010

Global mineral resource assessment: porphyry copper assessment of Mexico: Chapter A in Global mineral resource assessment

Mineral resource assessments provide a synthesis of available information about distributions of mineral deposits in the Earth&rsquo;s crust. A probabilistic mineral resource assessment of undiscovered resources in porphyry copper deposits in Mexico was done as part of a global mineral resource assessment. The purpose of the study was to (1) delineate permissive areas (tracts) for undiscovered porphyry copper deposits within 1 km of the surface at a scale of 1:1,000,000; (2) provide a database of known porphyry copper deposits and significant prospects; (3) estimate numbers of undiscovered deposits within those permissive tracts; and (4) provide probabilistic estimates of amounts of copper (Cu), molybdenum (Mo), gold (Au), and silver (Ag) that could be contained in undiscovered deposits for each permissive tract. The assessment was conducted using a three-part form of mineral resource assessment based on mineral deposit models (Singer, 1993). Delineation of permissive tracts primarily was based on distributions of mapped igneous rocks related to magmatic arcs that formed in tectonic settings associated with subduction boundary zones. Using a GIS, map units were selected from digital geologic maps based on lithology and age to delineate twelve permissive tracts associated with Jurassic, Laramide (~90 to 34 Ma), and younger Tertiary magmatic arcs. Stream-sediment geochemistry, mapped alteration, regional aeromagnetic data, and exploration history were considered in conjunction with descriptive deposit models and grade and tonnage models to guide estimates. The 12 permissive tracts delineated for this assessment are grouped by age (Jurassic-Early Cretaceous, Laramide (~90 to 34 Ma), Tertiary) and range in size from ~3,000 to 184,000 km 2 . Probabilistic estimates of numbers of undiscovered deposits were made for 10 tracts. A qualitative discussion is included for one Jurassic tract that extends into the U.S. from northern Mexico, and a preliminary outline of the northernmost part of a Tertiary tract that continues well to the south of Mexico is included in summary figures for reference. This assessment estimates that 39 undiscovered deposits contain an arithmetic mean estimate of ~144 million metric tons of copper or more in ten tracts for which probabilistic estimates were made, in addition to 21 porphyry copper deposits that contain identified resources of ~52 million metric tons of copper. Approximately 70 percent of the estimated mean undiscovered copper resources are associated with permissive tracts that contain identified resources; the remaining estimated resources are associated with permissive tracts with no reported porphyry copper resources. In addition to copper, the mean expected values of undiscovered byproduct resources predicted by the simulation are ~4 million metric tons of molybdenum, ~48 thousand metric tons of silver, and 4 thousand metric tons of gold. The probability associated with these arithmetic means is on the order of 30 percent. Median expected amounts of metals predicted by the simulations may be ~50 percent lower than mean estimates, and in some cases, zero. For tracts that contain identified resources, the ratios of undiscovered to identified copper resources indicate that: Jurassic-Early Cretaceous tracts MX-J1 and MX-J2 contain fewer estimated undiscovered copper resources (ratios <1) than identified resources; Laramide tract MX-L1 may contain significantly more copper than has been identified; Laramide tract MX-L2, the tract that contains most of the known deposits in Mexico, including the world-class deposits at Cananea and La Caridad, may contain about as much copper, molybdenum, and silver in undiscovered deposits and more gold than has been identified; Tertiary tracts MX-T1 and MX-T2, where no porphyry copper deposits are known, may contain undiscovered deposits; Tertiary tract MX-T3 may contain about three times more copper than has been identified; and Permissive tracts with no known deposits (MX-J3, MX-J5, MX-L3, MX-T1, MX-T2) contain approximately 30 percent of the total estimated undiscovered copper resources. Most porphyry copper exploration in Mexico focused on the exposed northern parts of the Laramide arc. This assessment suggests that the exposed and shallowly buried (<1 km) parts of the Laramide and Tertiary arcs delineated as permissive tracts are more likely to contain undiscovered deposits than are older (Jurassic-Early Cretaceous) arc segments. Interest in gold has prompted exploration of historical precious metal prospects and small mines in Mexico, some of which may represent high-sulfidation epithermal systems overlying or adjacent to porphyry copper systems. This report includes a brief overview of porphyry copper deposits in Mexico, a description of the assessment process used, a summary of results, and appendixes. Appendixes A through K contain summary information for each tract, as follows: location, the geologic feature assessed, the rationale for tract delineation, tables and descriptions of known deposits and significant prospects, exploration history, model selection, rationale for the estimates, assessment results, and references. The accompanying digital map files (shapefiles) provide permissive tract outlines, assessment results, and data for deposits and prospects in a GIS format (appendix L).

Scientific Investigations Report↗
USGS2009

Questa Baseline and Pre-mining Ground-Water Quality Investigation, 7. A Pictorial Record of Chemical Weathering, Erosional Processes, and Potential Debris-flow Hazards in Scar Areas Developed on Hydrothermally Altered Rocks

Erosional scar areas developed along the lower Red River basin, New Mexico, reveal a complex natural history of mineralizing processes, rapid chemical weathering, and intense physical erosion during periodic outbursts of destructive, storm-induced runoff events. The scar areas are prominent erosional features with craggy headwalls and steep, denuded slopes. The largest scar areas, including, from east to west, Hottentot Creek, Straight Creek, Hansen Creek, Lower Hansen Creek, Sulfur Gulch, and Goat Hill Gulch, head along high east-west trending ridges that form the northern and southern boundaries of the lower Red River basin. Smaller, topographically lower scar areas are developed on ridge noses in the inner Red River valley. Several of the natural scar areas have been modified substantially as a result of large-scale open-pit and underground mining at the Questa Mine; for example, much of the Sulfur Gulch scar was removed by open pit mining, and several scars are now partially or completely covered by mine waste dumps.

Open-File Report↗
USGS2009

Low-fluorine Stockwork Molybdenite Deposits

Low-fluorine stockwork molybdenite deposits are closely related to porphyry copper deposits, being similar in their tectonic setting (continental volcanic arc) and the petrology (calc-alkaline) of associated igneous rock types. They are mainly restricted to the Cordillera of western Canada and the northwest United States, and their distribution elsewhere in the world may be limited. The deposits consist of stockwork bodies of molybdenite-bearing quartz veinlets that are present in and around the upper parts of intermediate to felsic intrusions. The deposits are relatively low grade (0.05 to 0.2 percent Mo), but relatively large, commonly >50 million tons. The source plutons for these deposits range from granodiorite to granite in composition; the deposits primarily form in continental margin subduction-related magmatic arcs, often concurrent with formation of nearby porphyry copper deposits. Oxidation of pyrite in unmined deposits or in tailings and waste rock during weathering can lead to development of acid-rock drainage and limonite-rich gossans. Waters associated with low-fluorine stockwork molybdenite deposits tend to be nearly neutral in pH; variable in concentrations of molybdenum (<2 to >10,000 ug/L); below regulatory guidelines for copper, iron, lead, zinc, and mercury; and locally may exceed guidelines for arsenic, cadmium, and selenium.

Open-File Report↗
USGS2009

Climax-Type Porphyry Molybdenum Deposits

Climax-type porphyry molybdenum deposits, as defined here, are extremely rare; thirteen deposits are known, all in western North America and ranging in age from Late Cretaceous to mainly Tertiary. They are consistently found in a postsubduction, extensional tectonic setting and are invariably associated with A-type granites that formed after peak activity of a magmatic cycle. The deposits consist of ore shells of quartz-molybdenite stockwork veins that lie above and surrounding the apices of cupola-like, highly evolved, calc-alkaline granite and subvolcanic rhyolite-porphyry bodies. These plutons are invariably enriched in fluorine (commonly >1 percent), rubidium (commonly >500 parts per million), and niobium-tantalum (Nb commonly >50 parts per million). The deposits are relatively high grade (typically 0.1-0.3 percent Mo) and may be very large (typically 100-1,000 million tons). Molybdenum, as MoS2, is the primary commodity in all known deposits. The effect on surface-water quality owing to natural influx of water or sediment from a Climax-type mineralized area can extend many kilometers downstream from the mineralized area. Waste piles composed of quartz-silica-pyrite altered rocks will likely produce acidic drainage waters. The potential exists for concentrations of fluorine or rare metals in surface water and groundwater to exceed recommended limits for human consumption near both mined and unmined Climax-type deposits.

Open-File Report↗
USGS2009

Mineral-resource assessment of northern Nye County, Nevada— A progress report

The U.S. Geological Survey (USGS), University of Nevada, Las Vegas (UNLV), and Nevada Bureau of Mines and Geology (NBMG), which is a part of the University of Nevada, Reno (UNR), have completed the first year of data collection and analysis in preparation for a new mineral- and energy-resource assessment of northern Nye County, Nevada. This report provides information about work completed before October 1, 2009. Existing data are being compiled, including geology, geochemistry, geophysics, and mineral-deposit information. Field studies are underway, which are primarily designed to address issues raised during the review of existing information. In addition, new geochemical studies are in progress, including reanalyzing existing stream-sediment samples with modern methods, and analyzing metalliferous black shales.

Nevada↗
USGS2007

USGS national surveys and analysis projects: Preliminary compilation of integrated geological datasets for the United States

The growth in the use of Geographic nformation Systems (GS) has highlighted the need for regional and national digital geologic maps attributed with age and rock type information. Such spatial data can be conveniently used to generate derivative maps for purposes that include mineral-resource assessment, metallogenic studies, tectonic studies, human health and environmental research. n 1997, the United States Geological Survey&rsquo;s Mineral Resources Program initiated an effort to develop national digital databases for use in mineral resource and environmental assessments. One primary activity of this effort was to compile a national digital geologic map database, utilizing state geologic maps, to support mineral resource studies in the range of 1:250,000- to 1:1,000,000-scale. Over the course of the past decade, state databases were prepared using a common standard for the database structure, fields, attributes, and data dictionaries. As of late 2006, standardized geological map databases for all conterminous (CONUS) states have been available on-line as USGS Open-File Reports. For Alaska and Hawaii, new state maps are being prepared, and the preliminary work for Alaska is being released as a series of 1:500,000-scale regional compilations. See below for a list of all published databases.

Conference Paper↗
USGS2005

Geochemical Analyses of Geologic Materials from Areas of Critical Environmental Concern, Clark and Nye Counties, Nevada

INTRODUCTION An assessment of known and undiscovered mineral resources of selected areas administered by the Bureau of Land Management (BLM) in Clark and Nye Counties, Nevada was conducted by the U.S. Geological Survey (USGS), Nevada Bureau of Mines and Geology (NBMG), and University of Nevada, Las Vegas (UNLV). The purpose of this work was to provide the BLM with information for use in their long-term planning process in southern Nevada so that they can make better-informed decisions. The results of the assessment are in Ludington (2006). Existing information about the areas, including geology, geophysics, geochemistry, and mineral-deposit information was compiled, and field examinations of selected areas and mineral occurrences was conducted. This information was used to determine the geologic setting, metallogenic characteristics, and mineral potential of the areas. Twenty-five Areas of Critical Environmental Concern (ACECs) were identified by BLM as the object of this study. They range from tiny (less than one km2) to large (more than 1,000 km2). The location of the study areas is shown on Figure 1. This report includes geochemical data for rock samples collected by staff of the USGS and NBMG in these ACECs and nearby areas. Samples have been analyzed from the Big Dune, Ash Meadows, Arden, Desert Tortoise Conservation Center, Coyote Springs Valley, Mormon Mesa, Virgin Mountains, Gold Butte A and B, Whitney Pockets, Rainbow Gardens, River Mountains, and Piute-Eldorado Valley ACECs.

Open-File Report↗
USGS2005

Questa baseline and pre-mining ground-water quality investigation. 10. Geologic influences on ground and surface waters in the lower Red River watershed, New Mexico

This report is one in a series that presents results of an interdisciplinary U.S. Geological Survey (USGS) study of ground-water quality in the lower Red River watershed prior to open-pit and underground molybdenite mining at Molycorp’s Questa mine. The stretch of the Red River watershed that extends from just upstream of the town of Red River, N. Mex., to just above the town of Questa includes several mineralized areas in addition to the one mined by Molycorp. Natural erosion and weathering of pyrite-rich rocks in the mineralized areas has created a series of erosional scars along this stretch of the Red River that contribute acidic waters, as well as mineralized alluvial material and sediments, to the river. The overall goal of the USGS study is to infer the premining ground-water quality at the Molycorp mine site. An integrated geologic, hydrologic, and geochemical model for ground water in the mineralized—but unmined—Straight Creek drainage (a tributary of the Red River) is being used as an analog for the geologic, geochemical, and hydrologic conditions that influenced ground-water quality and quantity in the Red River drainage prior to mining. This report provides an overall geologic framework for the Red River watershed between Red River and Questa, in northern New Mexico, and summarizes key geologic, mineralogic, structural and other characteristics of various mineralized areas (and their associated erosional scars and debris fans) that likely influence ground- and surface-water quality and hydrology. The premining nature of the Sulphur Gulch and Goat Hill Gulch scars on the Molycorp mine site can be inferred through geologic comparisons with other unmined scars in the Red River drainage.

New Mexico↗
USGS2004

Assessment of metallic mineral resources in the Humboldt River Basin, Northern Nevada, with a section on Platinum-Group-Element (PGE) potential of the Humboldt mafic complex

The Humboldt River Basin is an arid to semiarid, internally drained basin that covers approximately 43,000 km2 in northern Nevada. The basin contains a wide variety of metallic and nonmetallic mineral deposits and occurrences, and, at various times, the area has been one of the Nation's leading or important producers of gold, silver, copper, mercury, and tungsten. Nevada currently (2003) is the third largest producer of gold in the world and the largest producer of silver in the United States. Current exploration for additional mineral deposits focuses on many areas in northern Nevada, including the Humboldt River Basin.

Nevada↗
USGS2003

Geologic database for digital geology of California, Nevada, and Utah— An application of the North American Data Model

The USGS is creating an integrated national database for digital state geologic maps that includes stratigraphic, age, and lithologic information. The majority of the conterminous 48 states have digital geologic base maps available, often at scales of 1:500,000. This product is a prototype, and is intended to demonstrate the types of derivative maps that will be possible with the national integrated database. This database permits the creation of a number of types of maps via simple or sophisticated queries, maps that may be useful in a number of areas, including mineral-resource assessment, environmental assessment, and regional tectonic evolution. This database is distributed with three main parts: a Microsoft Access 2000 database containing geologic map attribute data, an Arc/Info (Environmental Systems Research Institute, Redlands, California) Export format file containing points representing designation of stratigraphic regions for the Geologic Map of Utah, and an ArcView 3.2 (Environmental Systems Research Institute, Redlands, California) project containing scripts and dialogs for performing a series of generalization and mineral resource queries. IMPORTANT NOTE: Spatial data for the respective stage geologic maps is not distributed with this report. The digital state geologic maps for the states involved in this report are separate products, and two of them are produced by individual state agencies, which may be legally and/or financially responsible for this data. However, the spatial datasets for maps discussed in this report are available to the public. Questions regarding the distribution, sale, and use of individual state geologic maps should be sent to the respective state agency. We do provide suggestions for obtaining and formatting the spatial data to make it compatible with data in this report. See section ‘Obtaining and Formatting Spatial Data’ in the PDF version of the report.

California, Nevada, Utah↗