Geology topics

Seulgi Moon

Publications and source records attributed to Seulgi Moon.

6 recordsLinked to original sources

USGS2026

Deep critical zone controls on shallow landslides

The deep critical zone (CZ) has long been recognized for its importance in influencing shallow landslides but was not considered feasible to include in slope stability models at the watershed scale. In this study, we demonstrate that simple approximations of the CZ in a fully coupled hydrologic and soil slope stability model can effectively capture the location, timing, and likely size of shallow landslides. To achieve this, we use coupled, process-based models that incorporate the effects of 1) deep CZ structures, 2) three-dimensional transient hydrology, and 3) multidimensional slope stability, calibrated with data from an intensively monitored field site. Our results show that the hydrologically active deep CZ guides groundwater flow, influencing where it drains from or exfiltrates to the soil mantle, producing distinct patterns of soil saturation and seepage forces at the soil-bedrock boundary. Deep conductive weathered critical zone drains the soil mantle, reducing the likelihood of destabilizing pore pressures, while the downslope thinning of the CZ forces groundwater to the surface. This creates localized instability and a tendency for similar-sized landslides across the landscape. In contrast, the absence of conductive weathered bedrock results in more widespread destabilizing pore pressures, leading to larger landslides and the likelihood of landslides earlier in a storm than in landscapes underlain by a deep CZ. Our findings suggest that first-order variations of deep CZ can provide physical explanations for variations observed in the susceptibility, magnitude, and timing of shallow landslides, and that CZ structure may be inferred from patterns and timing of landsliding.

Proceedings of the National Academy of Sciences↗

USGS2025

Cascading land surface hazards as a nexus in the Earth system

Earth’s surface is sculpted by numerous processes that move sediment, ranging from gradual and benign to abrupt and catastrophic. Although infrequent, high-magnitude sediment mobilization events can be hazardous to people and infrastructure, leaving topographic imprints on the landscape and remarkable narratives in the historical record. Hazardous events such as fires, storms, and earthquakes accelerate erosion and sediment transport, increasing landscape sensitivity to subsequent perturbations, thus forming a cascading hazard. Although the redistribution of sediment across Earth’s landscape can result in higher risks to vulnerable populations, cascading processes are commonly unaccounted for in hazard assessments. Cascading hazards can occur almost immediately after triggering events, such as coseismic landslides, or over months, years, or even decades after an initial perturbation, such as debris flows after wildfires or flooding in channels alluviated by volcanic debris. Sediment cascades span Earth’s surface, from mountaintops to river valleys, where erosion, deposition, and aggradation can lead to a myriad of hazardous processes, including decreased river conveyance capacity, which increases the likelihood of downstream flooding. An improved understanding of the magnitude, frequency, and persistence of cascading hazards is critical given the rapid changes in the frequency and severity of storms, fires, sea-level change, and cryospheric melting, as well as the expansion of high-population-density urban footprints in regions susceptible to solid Earth hazards. Understanding the full consequences and underlying physics of Earth’s cascading land surface hazards can help minimize future human and economic losses.

California↗

USGS2022

Microcontinent breakup and links to possible plate boundary reorganization in the northern Gulf of California, México

Faults on microcontinents record the dynamic evolution of plate boundaries. However, most microcontinents are submarine and difficult to study. Here, we show that the southern part of the Isla Ángel de la Guarda (IAG) microcontinent, in the northern Gulf of California rift, is densely faulted by a late Quaternary-active normal fault zone. To characterize the onshore kinematics of this Almeja fault zone, we integrated remote fault mapping using high-resolution satellite- and drone-based topography with neotectonic field-mapping. We produced 13 luminescence ages from sediment deposits offset or impounded by faults to constrain the timing of fault offsets. We found that north-striking normal faults in the Almeja fault zone continue offshore to the south and likely into the nascent North Salsipuedes basin southwest of IAG. Late Pleistocene and Holocene luminescence ages indicate that the most recent onshore fault activity occurred in the last ∼50 kyr. These observations suggest that the North Salsipuedes basin is kinematically linked with and continues onshore as the active Almeja fault zone. We suggest that fragmentation of the evolving IAG microcontinent may not yet be complete and that the Pacific-North America plate boundary is either not fully localized onto the Ballenas transform fault and Lower Delfin pull-apart basin or is in the initial stage of a plate boundary reorganization.

Gulf of California↗

USGS2021

Holocene depositional history inferred from single-grain luminescence ages in southern California, North America

Significant sediment flux and deposition in a sedimentary system are influenced by climate changes, tectonics, lithology, and the sedimentary system's internal dynamics. Identifying the timing of depositional periods from stratigraphic records is a first step to critically evaluate the controls of sediment flux and deposition. Here, we show that ages of single-grain K-feldspar luminescence subpopulations may provide information on the timing of previous major depositional periods. We analyzed 754 K-feldspar single-grains from 17 samples from the surface to ∼9 m-depth in a trench located downstream of the Mission Creek catchment. Single-grain luminescence subpopulation ages significantly overlap at least eight times since ∼12.0 ka indicating a common depositional history. These depositional periods correspond reasonably well with the Holocene intervals of wetter than average climate conditions based on hydroclimatic proxies from nearby locations. Our findings imply a first-order climatic control on sediment depositional history in southern California on a millennial timescale.

California↗

USGS2021

Prehistoric earthquakes on the Banning strand of the San Andreas fault, North Palm Springs, California

We studied a paleoseismic trench excavated in 2017 across the Banning strand of the San Andreas fault and herein provide the first detailed record of ground-breaking earthquakes on this important fault in Southern California. The trench exposed an ~40-m-wide fault zone cutting through alluvial sand, gravel, silt, and clay deposits. We evaluated the paleoseismic record using a new metric that combines event indicator quality and stratigraphic uncertainty. The most recent paleoearthquake occurred between 950 and 730 calibrated years B.P. (cal yr B.P.), potentially contemporaneous with the last rupture of the San Gorgonio Pass fault zone. We interpret five surface-rupturing earthquakes since 3.3–2.5 ka and eight earthquakes since 7.1–5.7 ka. It is possible that additional events have occurred but were not recognized, especially in the deeper (older) section of the stratigraphy, which was not fully exposed across the fault zone. We calculated an average recurrence interval of 380–640 yr based on four complete earthquake cycles between earthquakes 1 and 5. The average recurrence interval is thus slightly less than the elapsed time since the most recent event on the Banning strand. The average recurrence interval on the Banning strand is thus intermediate between longer intervals published for the San Gorgonio Pass fault zone (~1600 yr) and shorter intervals on both the Mission Creek strand of the San Andreas fault (~215 yr) and the Coachella section (~125 yr) of the San Andreas fault.

California↗

USGS2019

Length-scale-dependent relationships between VS30 and topographic slopes in southern California

In engineering seismology, the time‐averaged shear‐wave velocity ( ⁠ V S ⁠ ) of the upper 30 m of the crust ( ⁠V S30⁠ ) is the primary parameter used in ground‐motion models to predict seismic site effects. ⁠V S30⁠ is typically derived from in situ recordings of V S ⁠ , although proxy‐based approaches (using geologic and/or geomorphometric classifications) are provisionally adopted when measurement‐based ⁠V S30⁠ are sparse or not readily available. Despite the acceptance of proxy approaches, there are limited studies that examine the empirical relationships between ⁠V S30⁠ and topographic attributes measured from various length scales and different resolutions of the digital elevation model. In this study, we examine the relationships between compiled ⁠V S30⁠ measurements from 218 sites in southern California and topographic metrics of slope and relief measured over various length scales. We find that the correlations between topographic metrics and ⁠V S30⁠ are weak but statistically significant. The correlations are improved when topographic slopes and relief are measured over length scales longer than typical hillslopes and ⁠V S30⁠ sites are separated by different geologic groups. This is likely because ⁠V S30⁠ ⁠ , especially on the rock sites, is better reflected in topographic metrics that capture large‐scale topographic relief, as well as landscape positions such as hilltops and valley bottoms.

California↗