Search USGS⌕ Search

Geology topics

Sean Patrick Gaynor

Publications and source records attributed to Sean Patrick Gaynor.

15 recordsLinked to original sources

Trace element heterogeneity and crystallization history of the Plesovice zircon: Implications for its use as a U–Pb LA-ICP-MS reference material

Zircon crystals from Plešovice hyperpotassic granulite (HPG) have been widely used as a reference material for LA-ICP-MS dating. Detailed cathodoluminescence (CL) imaging and trace element analysis reveal a complex internal structure of Plešovice zircon linked to extreme chemical heterogeneity, which allows us to distinguish different zircon domains formed during its crystallization: (i) rare low-CL cores enriched in U, Nb, HREE and Y; (ii) dominant sector-zoned to oscillatory-zoned domains, and (iii) CL-bright rims poor in trace elements. Relic fine oscillatory zoned areas are chemically homogeneous, whereas coarsened and blurred areas, and CL-dark replacement domains, are heterogeneous. Based on these data we suggest a complex and protracted zircon evolution: (i) crystallization of metamorphic zircon in anatectic calc-alkaline granulite; (ii) magmatic zircon crystallization at high temperature and pressure in a dry ultrapotassic melt at presence of peritectic garnet; (iii) coupled zircon dissolution-precipitation processes triggered by percolating hydrous residual melt; and (iv) coarsening and replacement of the pre-existing zircon due to prolonged exposure to a reactive fluid/hydrous melt. New CA-ID-TIMS U Pb dates between 337.167 ± 0.080 and 337.840 ± 0.080 Ma confirm crystallization age for HPG zircon at around 337.4 Ma and suggest that previously published dates of 336.37 Ma were biased by non-mitigated lead loss. We thus confirm the U/Pb homogeneity of Plešovice reference zircon despite its chemical heterogeneity. We further discuss the implications of using the chemically extremely heterogeneous Plešovice reference zircon as primary or secondary standard for in-situ LA-ICP-MS geochronology, in particular for quantification of the chemical matrix-dependence of the relative sensitivity factor ( β ) of laser ablation.

Plešovice quarry↗

Critical minerals in zinc ore—An update on Earth Mapping Resources Initiative Research in the Boulder Batholith region, Montana

Plain Language Summary U.S. Geological Survey research, in collaboration with Montana Technical University and Montana Bureau of Geology and Mines, is providing key critical mineral information that may have potential for critical mineral production of several mining districts in the Boulder Batholith region, to better understand the abundance and distribution of natural resources within this region. Continued research can be used to show the potential for previously undiscovered critical mineral resources in southwestern Montana and in other parts of the United States.

Montana↗

Patterns of rift basin development and the fidelity of the subsidence record: Insights through Bayesian modeling of rapid tectonic subsidence in a Rio Grande rift basin, Socorro, NM, U.S.A

Characterizing tectonic subsidence rates within depositional sequences provides direct insight into the driving mechanism(s) of accommodation in a basin. However, the temporal resolution of this record is often stymied by a lack of high-precision and high-resolution ages, which enable a more complete description of basin subsidence drivers. We explore the effect of high-precision and high-resolution ages in modeling accommodation for the Miocene La Jencia Basin of the central Rio Grande rift (RGR) and interpret driving mechanism behavior from these models (e.g., lithospheric thinning). We present a new geochronologic dataset of both laser ablation-inductively coupled plasma mass spectrometry (LA-ICPMS) and chemical abrasion-isotope dilution-thermal ionization mass spectrometry (CA-ID-TIMS) data and use these ages in Bayesian accommodation modeling. Models constrained by high-precision and high-accuracy TIMS ages yield peak tectonic subsidence rates exceeding 220 m/Myr, and an average Miocene subsidence of ∼120 m/Myr. While timing and magnitude vary, all models suggest two pulses of rapid Miocene tectonic subsidence, which we interpret to reflect basin-bounding fault movement. Prior to peak subsidence, there was an initial period of fault linkage and organization that occurred over <1–3 Myr that produced the basin-bounding La Jencia-Cerro Colorado fault zone. A comparison of published tectonic subsidence rates to those modeled here shows that while tectonic subsidence during continental rifting is highly variable, the La Jencia Basin rates appear relatively high. However, the significant difference between peak and average La Jencia Basin rates modeled here highlights the potential for underestimation of many records of tectonic subsidence due to a lack of high-precision and high-resolution age constraints. Furthermore, age data and modeling results presented here document fault movement and consequent rates of tectonic subsidence that lower-resolution data would not, providing a high-fidelity case study of continental rift basin development.

New Mexico↗

Depth of magma crystallization and fluid exsolution beneath the porphyry-skarn Cu deposits at Santa Rita and Hanover-Fierro, New Mexico, USA

The depth level at which porphyry Cu–forming magmas fractionated and exsolved mineralizing fluids is actively debated. In the classic model, extensive magma fractionation occurs in large, upper crustal magma chambers, and concomitant fluid exsolution leads to forceful expulsion of residual magmas in the form of porphyry dikes, stocks, and breccia pipes, which subsequently serve as pathways for the mineralizing fluids. In contrast, some recent studies highlighting the role of deep crustal magma fractionation in the production of fertile magmas essentially deny the existence of upper crustal magma chambers at the time of mineralization. To address this, we conducted a detailed thermobarometric investigation of 13 intermediate to felsic, porphyritic intrusive rocks related to porphyry-skarn Cu mineralization at Santa Rita and Hanover-Fierro, New Mexico, United States, representing two premineralization magmas (61–60 Ma), seven synmineralization magmas (60–58 Ma), and four late- to postmineralization magmas (58–57 Ma). For each sample, the pressure of last magma crystallization before final magma ascent to the current exposure level was reconstructed based on Al-in-hornblende barometry of small hornblende inclusions trapped within quartz phenocrysts and through titanium-in-quartz (TitaniQ) thermobarometry of the host quartz phenocrysts themselves. Since quartz is one of the last crystallizing magmatic minerals, and no significant phenocryst growth could have occurred in small dikes and stocks after final magma emplacement, quartz phenocrysts and their contained hornblende inclusions record the depth of last magma crystallization before final magma ascent. When present, hornblende phenocrysts and hornblende inclusions within other major phenocrysts were also analyzed. Both quartz and hornblende barometers return consistent average pressures of 3.2 ± 0.4 kbar for the entire suite of pre- to postmineralization magmas, corresponding to depths of 11 to 14 km. The synmineralization magmas return even more consistent average pressures of 3.1 ± 0.2 kbar, corresponding to a depth of 12 ± 1 km. The volume of the mineralizing porphyry dikes and stocks at the emplacement level is far too small to have provided all the fluids and metals required to form the observed ore deposits. Therefore, the majority of the ore-forming fluids must have originated from the magmas that crystallized at 12 ± 1 km depth. The ore deposits, conversely, formed at ~5-km paleodepth. This implies that most of the mineralizing fluids traveled an average vertical distance of ~7 km from their magmatic source to the eventual site of ore precipitation. The relatively unaltered nature and low veining degree of deeper parts of mineralized porphyry dikes and stocks suggest that the fluid transport through these intrusive bodies occurred mostly at near-solidus conditions by means of fluid percolation along grain boundaries. In summary, our results suggest that (1) a large, upper crustal pluton exists ~7 km beneath the Santa Rita and Hanover-Fierro deposits; (2) abundant phenocryst crystallization occurred at this depth level; and (3) this pluton was the main source for the exsolution of ore-forming fluids. However, the investigated rocks have elevated whole-rock Sr/Y ratios, indicating magma fractionation at deep crustal levels. As a result, our preferred model is a combination of the two end-member models introduced above, with most magma fractionation having occurred in the deep crust and with residual, intermediate to felsic melts having ascended and accumulated at 11 to 14 km paleodepth, where they continued to crystallize with comparatively little crystal-liquid separation, before some of these magmas ascended further to shallow levels and quenched to porphyries.

New Mexico↗

RioM-1: A new calcite reference material for U-Pb LA-ICP-MS geochronology

Determining absolute ages of carbonate diagenesis, faulting, fossil formation, speleothem growth, carbonate-hosted hydrocarbon deposits, vein mineralisation and hydrothermal alteration has become increasingly accessible through LA-ICP-MS U-Pb dating of calcite, complementing traditional isotope dilution methods still applicable to certain materials (e.g., speleothems via micro-drilling). However, well-calibrated reference materials for LA-ICP-MS calcite geochronology remain scarce. Here, we characterise the Rio Maior calcite, designated ‘RioM-1’, as a potential reference material for U-Pb dating by LA-ICP-MS. Fragments (0.1 to 1 cm 3 ) from a single scalenohedral crystal were analysed by ID-TIMS (U-Pb), LA-ICP-MS (U-Pb and 87 Sr/ 86 Sr), and SIMS (O isotopes). RioM-1 displays high U mass fraction and low, though variable, proportions of common Pb. Combined ID-TIMS analyses from two independent laboratories yielded a Tera-Wasserburg lower intercept date of 63.93 ± 0.11 Ma (2 s , MSWD = 1.3, n = 16). LA-ICP-MS U-Pb data from three independent laboratories are concordant with the TIMS age, producing a pooled date of 64.10 ± 0.12/1.2 Ma (2 s , MSWD = 7.7, n = 708) and an initial 207 Pb/ 206 Pb ratio of 0.85 ± 0.01. Other calcite reference materials, when normalised to RioM-1, yielded dates within uncertainty of their published values. SIMS measurements returned a mean 18 O/ 16 O of 0.002044450 ± 181 (1 s ) and δ 18 O SMOW of 19.57 ± 0.92‰ (1 s ), while LA-ICP-MS strontium isotope measurement yielded a mean 87 Sr/ 86 Sr of 0.708177 ± 9 (2 s ).

Geostandards and Geoanalytical Research↗

Widespread anhydrite saturation in Laramide-age arc magmas of southwestern USA

Anhydrite is considered a rare mineral phase in magmas, with only ∼33 documented occurrences worldwide. However, anhydrite readily decomposes in the near-surface environment, making it difficult to recognize its former presence in rocks collected at or near Earth’s surface. In such samples, only small anhydrite inclusions fully shielded within other minerals can have survived. During a recent field trip to the southwestern USA, we sampled 17 Laramide-age (ca. 40−80 Ma) magma systems, most of which are associated with porphyry copper deposits. A systematic search for anhydrite inclusions preserved within apatite, amphibole, plagioclase, and quartz phenocrysts in ∼100 rock samples by optical microscopy and Raman spectroscopy revealed that each of these 17 magma systems was at least temporarily anhydrite-saturated. Also, most previously identified magmatic anhydrite-bearing intrusions are associated with porphyry copper deposits, and both intrusive and volcanic rocks containing magmatic anhydrite show high Sr/Y ratios. These observations suggest that anhydrite saturation and porphyry copper formation are linked via magma fractionation at high pressure. Compared to average arc magmas, anhydrite-bearing magmas are unusually oxidized and sulfur-rich and seem to also be unusually water-rich. Hence, our preferred interpretation is that magma generation and/or fractionation at high pressure promotes the formation of superhydrous and oxidized magmas, which in turn promotes high sulfur contents and ultimately the precipitation of anhydrite. The high mineralization potential of these magmas does not need to result from their high sulfur content but could be caused by other properties of high-pressure magmas.

Arizona, New Mexico↗

Estimating the hypothetical endowment of critical minerals and other commodities in porphyry copper mine waste in the Four Corners states, USA

Society is fundamentally dependent upon commodities that are used in end-use products for the aerospace, defense, energy, telecommunication, and transportation sectors, resulting in centuries of mining to supply these commodities and materials. Waste from these mining operations can remain on the landscape indefinitely, but there is a lack of national understanding of the distribution and scale of such waste features. The renewable energy transition will continue to increase demand for critical minerals and will result in increasing volumes of mine waste on the Earth’s surface. Reprocessing mine waste can reduce environmental risks and recover needed commodities to match growing demand for societal growth. Therefore, understanding the approximate abundance of commodities that may be available for recovery within mine waste features can be an important piece of domestic critical mineral supply.

Arizona, Colorado, New Mexico, Utah↗

Foundational uncertainties in terminal Ediacaran chronostratigraphy revealed by high-precision zircon U-Pb geochronology of the Nama Group, Namibia

The Nama Group of southern Namibia and northwestern South Africa hosts the best-dated mixed carbonate-siliciclastic foreland basin succession of the terminal Ediacaran [ca. 551 million years (Ma) ago to <538 Ma] and is key for resolving the chronology of early metazoan evolution. Numerous silicified volcanic tuff interbeds are present, but differing interpretations regarding the fidelity of their ages lead to different regional stratigraphic correlations, especially for the Urusis Formation of the Schwarzrand Subgroup. An expanded record of the Urusis Formation is found in the Swartpunt area of southern Namibia, which has yielded an important metazoan biota. But the succession in this area is preserved as a series of thrusts at the leading edge of the Gariep orogenic belt and zircon U-Pb data show systematic age repetition. We use regional stratigraphic and structural mapping, integrated with carbonate carbon isotope (δ 13 C carb ) chemostratigraphy and high-precision radioisotope U-Pb zircon geochronology from outcrop and recently acquired drill core to develop a temporally calibrated basin-wide depositional model. This integrated dataset either reflects complex zircon reworking, inheritance, or potential analytical biases (Scenario 1) or the presence of a Gariep-related cryptic décollement within the Spitskop Member that has resulted in stratigraphic repetition (Scenario 2). We investigate the evidence for and against both scenarios and consider their implications for stratigraphic and δ 13 C carb correlations between the Swartpunt area and coeval exposures along the Orange River border with South Africa. Given that these issues are in an area that hosts numerous silicified ash beds and extensive exposure, an inability to confidently discount either scenario highlights a level of compounding uncertainty in zircon U-Pb geochronology that must be considered when attempting to build global chronostratigraphic frameworks. Scenario 1 implies that some of the weighted mean ages and Bayesian eruption ages from the Swartpunt area may be >1 Myr older than the depositional age of their respective ash beds when assuming existing stratigraphic correlations. If this scenario is preferred, then a cautious approach would be to consider all weighted mean zircon U-Pb ages from ash beds to reflect maximum depositional ages. Both scenarios support deposition of the Huns Member >540 Ma in the Swartpunt area if the oldest weighted mean age reported here represents a near-depositional age, which has significant implications for the temporal calibration of important terminal Ediacaran ichnofossil assemblages and future cyclostratigraphic studies. Stratigraphic correlations common to both scenarios allow us to temporally calibrate a basin evolution model for the Nama Group. Temporal trends in initial hafnium isotope (εHf) compositions of zircon grains from ash beds throughout the succession may support progressive crustal thickening associated with underplating of the Damara orogenic belt along the northern periphery of the Kalahari craton from ca. 547 Ma to ca. 538 Ma. The compilation of new and published zircon U-Pb ages may also imply that the locus of carbonate platform development migrated from north to south (present co-ordinates), tracking the migration of foredeep subsidence.

Earth-Science Reviews↗

Insights from megacryst-included zircon dates on the spatial extent of magma mixing in the Tuolumne Intrusive Suite, California, USA

The spatial extent of mixing between separately emplaced batches of magma is a key component in understanding the incremental assembly of plutons. Potassium feldspar megacrysts (>3 cm length) in granodioritic rocks are hypothesized to record magma mixing and transport over hundred kyr timescales. CA-ID-TIMS U-Pb dates from zircon inclusions within 11 new megacryst samples and their surrounding matrix from the Tuolumne Intrusive Suite are presented as a means of evaluating the extent of mixing across a less than two km wide gradational contact. Megacrysts from within the gradational contact yielded zircon dates consistent with mixing or transport from the older porphyritic Half Dome Granodiorite, but the zircon included in megacrysts from the younger Cathedral Peak Granodiorite show no evidence of interaction with the porphyritic Half Dome. These results, along with the trace element geochemistry of the zircon, suggest that the porphyritic Half Dome and Cathedral Peak magmas where we sampled were not comagmatic, which constrains the width of a mixing front to the kilometer scale gradational contact between these units. From within this gradational contact, we do find evidence of mixing consistent with prior studies. Differences between the core- and rim-included zircon date spectra also suggest that protracted growth is recorded in some K-feldspar megacrysts but may not be a requirement for forming them.

California↗

Widespread occurrence of former anhydrite phenocrysts in Laramide-age magmas related to porphyry-skarn Cu mineralization at Santa Rita and Hanover-Fierro, New Mexico, USA

Reports of magmatic anhydrite are relatively rare, with only ~30 occurrences documented worldwide so far. However, magmatic anhydrite saturation is difficult to recognize because anhydrite decomposes rapidly in near-surface environments. In most cases, only anhydrite inclusions shielded within other phenocryst phases were able to survive. Alternatively, since anhydrite phenocrysts preserved in fresh volcanic rocks are characteristically intergrown with apatite phenocrysts, the former presence of anhydrite phenocrysts can be recognized based on the occurrence of lath-shaped cavities that show a strong spatial association with apatite phenocrysts. These cavities can be either empty or filled with low-temperature, secondary minerals such as zeolites, carbonates, or microcrystalline silica. A systematic search for the occurrence of such cavities, combined with optical and Raman-spectroscopic identification of anhydrite inclusions preserved within apatite, hornblende and quartz phenocrysts, demonstrates that most of the Laramide-age magmas associated with the Santa Rita and Hanover-Fierro porphyry-skarn Cu (Zn, Mo, Au, Pb) deposits were saturated in magmatic anhydrite. The anhydrite typically coexisted with monosulfide solid solution (MSS), suggesting oxygen fugacities of ~2.0±0.5 log units above the fayalite-magnetite-quartz buffer. The magmas range from andesitic to rhyodacitic in composition, and from shortly pre-mineralization (~61 Ma) to shortly post-mineralization (~57 Ma) in age. In three samples with particularly well-recognizable former anhydrite phenocrysts, their modal abundance could be quantified based on high-resolution scans of polished hand specimens. The observed modal anhydrite abundances of 0.63–1.8 vol% translate into minimum magma sulfur contents of 0.20–0.56 wt% S. The highest sulfur content of 0.56 wt% S is difficult to reconcile with available anhydrite solubility models, but it could be reproduced in an anhydrite solubility experiment performed at 950 °C and 1.15 GPa on a natural latite containing 13.1 wt% dissolved H2O. The sample with the second-highest sulfur content of 0.26 wt% S requires ~10 wt% H2O in the silicate melt, and, consequently, a minimum pressure of ~0.5 GPa. Taken together, the results suggest that the magmas of the Central Mining District were extremely hydrous and thus originated from great depth. Indeed, their major element compositions and reconstructed H2O and S contents agree well with experimentally observed and numerically predicted compositions of residual silicate melts after 50–70 wt% crystallization of ordinary arc basalts at high pressure and high oxygen fugacities.

New Mexico↗

Mine waste as a potential source of critical minerals and other commodities: Examples from the Four Corners states, USA

The growing demand for critical minerals and other mineral resources has raised concerns about possible supplies of these essential commodities. Mine waste is a potential source of these essential commodities. We compiled a geospatial database of publicly available data of the largest non-fuel mine waste features (>200,000 m 2 in areal extent) in the Four Corners states of the United States, where most of those features are from porphyry Cu deposits. The combined volume of those large porphyry Cu mine waste features is approximately 17 cubic kilometers, 60% of which is ore-related material such as tailings. Using publicly available data on density, grade, and previous recovery values, we estimate the contained endowments of Ag, As, Au, Bi, Cu, Mo, Re, S, Sb, Se, Te, and W. These estimates indicate endowments within ore-related mine wastes are collectively comparable to endowments of giant to supergiant deposits. If fully recovered, these commodities could meet current global demand from less than 1 year (Sb) to more than 200 years (Re), underscoring the enormous untapped resource potential of mine waste.

Arizona, Colorado, New Mexico, Utah↗

Tracing fluid evolution during batholith and deposit formation: In-situ and bulk rock Mo isotopes from the Questa porphyry Mo deposit, New Mexico, USA

The Oligocene Questa porphyry Mo deposit, located in New Mexico, USA, is a well-characterized system that formed over 400 kyr, punctuating the 8 Myr formation of the Questa-Latir batholith. Detailed sampling of the intrusions and minerals associated with magmatichydrothermal mineralization, as well as bookending barren intrusions, allows for examination of the Mo isotope record of the deposit and its host batholith. Through this established chronologic framework, such data can yield insights into the metallogenesis of deposit formation and long-term magma genesis evolution for upper crustal magmatism. The Mo isotopic compositions of barren intrusions yield a younging trend towards lighter δ 98 Mo. However, intrusions associated with Mo deposit formation yield heavier δ 98 Mo relative to barren magmatism, by up to 2.0‰. This indicates that they were affected by an isotopically heavy and Mo-rich fluid. The in-situ data from molybdenite covers the range observed in mineralized bulk rocks. However, individual samples consistently yield Mo isotopic variations of 0.4‰ to 0.5‰. The consistency of the δ 98 Mo variation in in-situ analyses of molybdenite within hand samples and individual mineral grains is likely the result of MoS 2 crystallization in a closed system and reflects an almost complete precipitation of Mo.

New Mexico↗

Tertiary metallogeny of the Rocky Mountains Province, USA

Tertiary ore deposits in the Rocky Mountains physiographic province primarily formed through magmatic-hydrothermal processes associated with shifting tectonics and lithospheric conditions. Important deposit types in the province are calc-alkaline and Climaxtype porphyry; high-, medium-, and low-sulfidation epithermal; alkalic magmatic; carbonate replacement; tungsten skarn and vein; and sandstone uranium. Province wide, there is diachroneity from north to south among both ore-forming and magmatic events.

Rocky Mountains Province↗

Spread and frequency of explosive silicic volcanism of the Carpathian-Pannonian Region during Early Miocene: Clues from the SW Pannonian Basin and the Dinaridesion during Early Miocene: clues from the SW Pannonian Basin and the Dinarides

Explosive silicic volcanism of the Carpathian-Pannonian Region (CPR) is increasingly recognized as the primary source of tephra across the Alpine-Mediterranean region during the Early and Middle Miocene. However, the tephrostratigraphic framework for this period of volcanic activity is still incomplete. We present new multi-proxy data from Lower Miocene ignimbrites and tephra fallout deposits from the southwestern CPR and the Dinaride Lake System and integrate them into existing datasets to better resolve the regional extent and scale of these eruptions of the CPR. Volcanic glass geochemistry indicates distal fallout tuffs deposited in the Sinj Basin are correlative with the proximal Ostoros ignimbrites from the Bükkalja Volcanic Field, indicative of regionally extensive volcanism at 17.295 ± 0.028 Ma, based on CA-ID-TIMS U Pb zircon geochronology. Based on integrated tephrostratigraphic data, newly identified 17.064 ± 0.010 Ma massive rhyolitic ignimbrite deposits from the Kalnik Volcaniclastic Complex located in the southwestern CPR are correlative with the 17.062 ± 0.010 Ma Mangó massive ignimbrite found in the Bükkalja Volcanic Field located in the northern CPR. Based on these new observations of its potential areal distribution and estimated thicknesses, these two widespread ∼17.1 Ma ignimbrites represent intermediate to large caldera-forming ignimbrites, larger than previously suggested. Finally, volcanic glass geochemistry of fallout deposits from the Dinaridic Sinj and Livno-Tomislavgrad Basins have similar volcanic glass geochemistry as the rhyolitic pumices from the lowermost part of the Bogács ignimbrite unit of the Bükkalja Volcanic Field. However, high-precision geochronology indicates that these distal ashfalls were deposited at 16.9567 ± 0.0074 Ma, significantly predating the 16.824 ± 0.028 Ma emplacement of the fiamme-bearing part of the Bogács ignimbrite. These distinct ages suggest that the Bogács unit represents multiple eruptive events and indicating that further work is required to deconvolve this portion of the CPR volcanic record. Together, these data suggest that large volume CPR ignimbrite volcanism was more frequent and widespread than previously understood, enhancing the existing volcanic framework and history of the source region for this time period.

Journal of Volcanology and Geothermal Research↗

High-precision U-Pb data and reference age for Emerald Lake apatite

New isotope dilution thermal ionization mass spectrometry U-Pb data for Emerald Lake apatite demonstrate its potential as a reference material for geochronology. A three-dimensional 238 U/ 206 Pb- 207 Pb/ 206 Pb- 204 Pb/ 206 Pb isochron produces a 95.2 ± 1.1 Ma date with an initial Pb isotopic composition of 206 Pb/ 204 Pb = 18.85 ± 0.19 and 207 Pb/ 204 Pb = 15.68 ± 0.10 (n = 5, MSWD = 9.5). These data yield a weighted mean initial Pb-corrected 206 Pb/ 238 U date of 95.18 ± 0.10 Ma (n = 5, MSWD = 1.5) and a weighted mean initial Pb-corrected 207 Pb/ 235 U date of 95.20 ± 0.17 Ma (n = 5, MSWD = 0.5). The new high-precision U-Pb age of Emerald Lake apatite further enables its utility as a reference material for in situ U-Pb apatite geochronology. Aliquots of Emerald Lake apatite are available for distribution for use in future studies.

Data in Brief↗