Search USGS⌕ Search

Geology topics

Scott E.K. Bennett

Publications and source records attributed to Scott E.K. Bennett.

28 records · Page 2Linked to original sources

Paleoseismic results from the Alpine site, Wasatch fault zone: Timing and displacement data for six holocene earthquakes at the Salt Lake City–Provo segment boundary

To improve the characterization of Holocene earthquakes on the Wasatch fault zone (WFZ), we conducted light detection and ranging (lidar)‐based neotectonic mapping and excavated a paleoseismic trench across an 8‐m‐high fault scarp near Alpine, Utah, located &lt; 1 &#x2009;&#x2009; km "> < 1 km <1 km south of the boundary between the Salt Lake City and Provo segments (SLCS and PS). We document evidence for six paleoearthquakes (AL6–AL1) from scarp‐derived colluvial wedges and crosscutting relations. A ground‐penetrating radar survey across the scarp resolved fault‐zone width, but not paleoearthquake stratigraphy. Bayesian (OxCal) modeling of 13 radiocarbon and 13 optically stimulated luminescence ages indicates that six earthquakes occurred &#x223C; 6.2 &#x2013; 0.4 &#x2009;&#x2009; ka "> ∼ 6.2 – 0.4 ka ∼6.2–0.4 ka . Interseismic recurrence ranges from 0.2 to 1.8 ky (mean 1.2 ky). We estimate 6.5 &#xB1; 0.7 &#x2009;&#x2009; m "> 6.5 ± 0.7 m 6.5±0.7 m of cumulative vertical tectonic displacement across the &#x2265; 14 &#x2010; m &#x2010; wide "> ≥ 14 ‐ m ‐ wide ≥14‐m‐wide fault zone used near‐field observations of scarp‐derived colluvial‐wedge thicknesses, antithetic faulting, and graben backtilting. This is similar to our independent estimate of 6.5 &#xB1; 0.5 &#x2009;&#x2009; m "> 6.5 ± 0.5 m 6.5±0.5 m using far‐field observations of the offset ground surface and correlation of alluvial‐fan stratigraphy across the WFZ. These results suggest that colluvial‐wedge thickness at the Alpine site approximates one‐half the original west‐facing fault scarp height. Per‐event vertical displacements range from 0.8 to 1.2 m (mean 1.1 m), which we use to estimate surface rupture lengths that may exceed 50 km from earthquakes as large as moment magnitude ( M w "> M w Mw ) &#x223C; 7.0 "> ∼ 7.0 ∼7.0 . The late Holocene average vertical slip rate is 0.9 &#x2009;&#x2009; mm / yr "> 0.9 mm / yr 0.9 mm/yr ( 0.7 &#x2013; 1.2 &#x2009;&#x2009; mm / yr "> 0.7 – 1.2 mm / yr 0.7–1.2 mm/yr range). Earthquake frequency has increased in the past &#x223C; 1 &#x2009;&#x2009; ky "> ∼ 1 ky ∼1 ky , whereas displacement per event has been similar for the past &#x223C; 6 &#x2009;&#x2009; ky "> ∼ 6 ky ∼6 ky , suggesting that strain accumulation is not the sole factor that controls the frequency and size of earthquakes at the SLCS–PS segment boundary. These findings can be used for a more nuanced characterization of earthquakes at the SLCS–PS boundary and improve earthquake hazard assessments along the Wasatch Front.

Utah↗

Breaching of strike-slip faults and successive flooding of pull-apart basins to form the Gulf of California seaway from ca. 8–6 Ma

The geologic record of the formation of marine basins during continental rifting is uncommonly preserved. Using GIS-based paleotectonic maps, we show that marine basin formation in the Gulf of California–Salton trough oblique rift (Mexico and the United States) occurred in a stepwise manner as crustal thinning lowered elevations within the Gulf of California Shear Zone, and subsidence along strike-slip and transtensional faults linked isolated pull-apart basins. At 8 Ma, the earliest marine conditions in the Gulf of California were restricted to an embayment at its southern mouth. Farther north, the plate boundary was a set of continental strike-slip faults and linked pull-apart basins, similar to the modern Walker Lane in Nevada and California. By ca. 7 Ma, a series of marine incursions breached across strike-slip faults to the Pescadero and Farallon basins. Marine waters then breached a 75–100 km-long transtensional fault zone between the Farallon and Guaymas basins, with intermittent flooding that led to accumulation of extensive evaporite deposits in the Guaymas basin. Marine incursion north of the Guaymas basin via breaches across the Guaymas and Tiburón strike-slip faults and transtensional zones resulted in flooding of the northern >500 km of the oblique rift by 6.5–6.3 Ma. Thus, strike-slip and transtensional faulting promoted localization of plate boundary strain and guided punctuated marine flooding of the Gulf of California seaway. Inception of the narrow, 1500-km-long Gulf of California at ca. 6.3 Ma was followed by complete continental rupture in the Guaymas basin at ca. 6.0 Ma.

Geology↗

Combining conflicting Bayesian models to develop paleoseismic records—An example from the Wasatch Fault Zone, Utah

Bayesian statistical analyses of paleoseismic data result in the probabilistic determination of earthquake times using geochronological data evaluated in the context of a stratigraphic model. However, a fundamental problem in paleoseismology is how to use the Bayesian approach to model sparse and/or conflicting geochronological datasets, such as those derived from sites exhibiting episodic sedimentary and pedogenic processes in moderate‐ to high‐energy environments (e.g., a normal‐faulted alluvial fan). Using paleoseismic data for the Corner Canyon site on the Salt Lake City segment of the Wasatch fault zone (Utah), we develop an approach by which multiple Bayesian models are combined to generate an earthquake history at a site. This approach accommodates mutually exclusive interpretations of the geochronological data and thereby limits the influence of sparse data, stratigraphically inconsistent ages, or a single, subjective model interpretation. For the Corner Canyon site, we integrate four OxCal Bayesian models to generate a chronology of six events between &#x223C; 4.8 "> ∼ 4.8 and &#x223C; 0.5 &#x2009;&#x2009; ka "> ∼ 0.5 ka ⁠ . Late Holocene (post‐5 ka) mean recurrence and vertical slip‐rate estimates are &#x223C; 0.9 &#x2009;&#x2009; ky "> ∼ 0.9 ky (0.7–1.0 ky; 95% confidence) and 1.1 &#x2009;&#x2009; mm / yr "> 1.1 mm / yr ( ⁠ 0.8 &#x2013; 1.7 &#x2009;&#x2009; mm / yr "> 0.8 – 1.7 mm / yr range), respectively. Although our method increases the uncertainty in the timing of individual earthquakes, it more objectively accounts for potential geochronological errors and different interpretations of stratigraphic age control. By relaxing the need to select a single age model, our approach yields more accurate earthquake‐timing results that will better facilitate evaluations of along‐fault event correlation and earthquake rupture length.

Utah↗

Slip history of the La Cruz fault: Development of a late Miocene transformin response to increased rift obliquity in the northern Gulf of California

The Gulf of California rift has accommodated oblique divergence of the Pacific and North America plates in north-western México since Miocene time. Due to its infancy, its rifted margins preserve a rare onshore record of early continental break-up processes and an opportunity to investigate the role of rift obliquity in strain localization. We map rift-related structures and syn-tectonic basins on southern Isla Tiburón, a proximal onshore exposure of the rifted North America margin. We integrate analysis and geochronology of syn-tectonic sedimentary basins and mapping of crosscutting relationships to characterize the style and timing of fault activity. On southern Isla Tiburón, an early phase of extension initiated between~19–17 Ma and ~12.2Ma. Subsequently, these normal faults and related basins were cut by the La Cruz strike-slip fault and buried by deposits of the La Cruz basin, an elongate, fault-controlled trough coextensive with the La Cruz fault. Crosscutting relationships show that the NW-striking La Cruz fault accrued 5 ± 2 km of dextral slip ~8–4 Ma. The La Cruz fault and parallel Tiburón transform were kinematically linked to detachment faulting that accommodated latest Miocene to Pliocene oblique opening of the offshore Upper Tiburón pull-apart basin. The onset of strike-slip faulting on Isla Tiburón was synchronous with the ~8–6 Ma onset of transform faulting and basin formation along >1000 km of the reconstructed Pacific-NorthAmerica plate boundary. This transition coincides with the commencement of a clockwise azimuthal shift in Pacific-North America relative plate motion that increased the obliquity of the Gulf of California rift and formed the Gulf of California shear zone. The record from the proto-Gulf of California illustrates how highly oblique rift geometries, where transform faults are kinematically linked to pull-apart basins, enhance the ability of continental lithosphere to rupture and, ultimately, hasten the formation of new oceanic rift basins.

Gulf of California↗

Geothermal potential of the Umatilla Indian Reservation, Oregon: Evidence from detailed geophysical investigations

Recent geologic and geophysical investigations were undertaken in northeastern Oregon to better assess earthquake hazards in the region and determine relative favorability for geothermal energy development on lands of the Confederated Tribes of the Umatilla Indian Reservation (CTUIR). This work was funded in part by a Bureau of Indian Affairs grant awarded to the CTUIR to identify areas most suitable for further exploration of geothermal resources. Results from this work were utilized as inputs to a geothermal favorability modeling process that led to the identification of target sites for further geothermal investigation. Beyond the geothermal aspect of this project, the region is of great tectonic significance as it marks the intersection of two major physiographic and geophysical features, the Klamath-Blue Mountain lineament (KBL) and Olympic-Wallowa lineament (OWL), inferred to represent major basement boundaries. The Thorn Hollow and Hite faults, which appear to be major linkages between the KBL and OWL, run through the study area. New aeromagnetic, gravity and magnetotelluric (MT) surveying, along with fault analyses, were conducted as part of this effort. Detailed geophysical exploration resulted in the collection of 1,380 new gravity stations, 34,524-line kilometers of aeromagnetic data (covering 12,524 km2) and measurements from 36 MT stations. Two-dimensional (2D) forward-modeling was executed along several profiles using gravity and aeromagnetic data, combined with existing geologic mapping and rock property constraints measured from hand samples and outcrops. These models are used to define lithologic contacts in the subsurface in the absence of well logs or borehole data to determine possible geothermal fluid reservoirs, as well as identify major structures that may act as conduits for the upward migration of geothermal fluids.

Oregon↗

Influence of the Eastern California Shear Zone on deposition of the Mio-Pliocene Bouse Formation: Insights from the Cibola area, Arizona

The Eastern California Shear Zone (ECSZ) is a wide zone of late Cenozoic strike-slip faults and related diffuse deformation that currently accommodates ~20–25% of relative Pacific–North America plate motion in the lower Colorado River region (Fig. 1A; Dokka and Travis, 1990; Miller et al., 2001; Guest et al., 2007; Mahan et al., 2009). The ECSZ is kinematically linked southward to dextral faults in the northern Gulf of California (Bennett et al., 2016a), and it may have initiated ca. 8 Ma when major strike-slip faults developed in the northern Gulf and Salton Trough region (Bennett et al., 2016b; Darin et al., 2016; Woodburne, 2017). Thus deformation related to the ECSZ occurred in the lower Colorado River region during deposition of the Bouse Formation, which is commonly bracketed between 6.0 and 4.8 Ma (House et al., 2008; Sarna-Wojcicki et al., 2011; Spencer et al., 2013) and may be as old as 6–7 Ma in the south (McDougall and Miranda Martínez, 2014, 2016). Post-4.5 Ma broad sagging is recognized along the lower Colorado River (Howard et al., 2015), but the possibility that faults of the ECSZ influenced local to regional subsidence patterns during deposition of the Bouse Formation has received little attention to date (e.g., Homan, 2014; O’Connell et al., 2016). The Bouse Formation is a widespread sequence of late Miocene to early Pliocene deposits exposed discontinuously along the lower Colorado River corridor (Fig. 1A). In the southern Blythe basin it consists of three regionally correlative members: (1) Basal Carbonate, consisting of supratidal and intertidal mud-flat marls, intertidal and shallow subtidal bioclastic grainstone and conglomerate, and subtidal marl; (2) Siliciclastic member, consisting of Colorado River-derived green claystone, red mudstone and siltstone, and cross-bedded river channel sandstone; and (3) Upper Bioclastic member fossiliferous sandy calcarenite, coarse pebbly grainstone, and calcareous-matrix conglomerate (Homan, 2014; Dorsey et al., 2016; O’Connell et al., 2016, 2017). The southern Bouse Formation has been interpreted as recording deposition in either a lake (Spencer and Patchett, 1997; Spencer et al., 2008, 2013; Bright et al., 2016) or shallow marine setting (Buising, 1990; McDougall, 2008; McDougall and Miranda Martínez, 2014; O’Connell et al., 2017). In this paper we summarize key results from five field seasons of detailed stratigraphic analysis south of Cibola, Ariz. ( . 1). The data reveal systematic stratal thinning and thickening, pinch-outs, and wedging patterns in the Bouse Formation that we conclude were produced by syn-depositional tilting in response to growth of normal faults near the eastern margin of the basin. Similar stratal patterns in other nearby areas suggest widespread structural controls on deposition of the Bouse Formation. A palinspastic reconstruction of the lower Colorado River region at 5 Ma, modified from Bennett et al. (2016), provides insight to regional fault geometries in the ECSZ that may have controlled syn-depositional tilting and subsidence in Bouse depocenters shortly prior to and during initiation of the Colorado River.

Conference Paper↗

Animated tectonic reconstruction of the Lower Colorado River region: Implications for Late Miocene to Present deformation

Although the majority of late Miocene to present Pacific-North America plate boundary strain has been accommodated by faults of the San Andreas and Gulf of California systems, growing evidence of dextral shear east of the San Andreas Fault indicates that a component of plate boundary deformation occurred in the lower Colorado River (LoCR) region. Large-scale tectonic reconstructions across the Gulf of California and Salton Trough (GCAST) region (Fig. 1), a ~500 km-wide zone of deformation that affected the western margin of North America, provide important constraints on the location, timing, style, and magnitude of crustal deformation in the LoCR region (Fig. 2). Characterizing Miocene to present deformation in the LoCR region is important to resolve the presence and kinematics of upper crustal structures that accommodated intracontinental strain and improves our understanding of the processes that promoted localized or diffuse strain during reorganization of the Pacific-North America plate boundary. Map-view translations of crustal blocks influence the relative motions of adjacent blocks, an approach adhered to in global plate-circuit models (Atwater and Stock, 1998; 2013). Thus, a synthesis of the magnitude and timing of horizontal strain across a broad zone of distributed deformation can provide insight into processes of strain partitioning and potential kinematic links between adjacent structural domains. Furthermore, it can help prioritize and guide future work by identifying gaps in our understanding of plate boundary deformation and provide a degree of predictability for palinspastic reconstructions in areas where little information exists. At present, detailed geologic studies of crustal deformation related to the Pacific-North America plate boundary in the LoCR region are limited, leading to considerable uncertainty in the late Cenozoic tectonic evolution of the region. This uncertainty limits our understanding of how plate coupling evolves during the transition from a convergent margin to a transform margin. In this paper, we utilize animated palinspastic fault-based reconstructions to evaluate the tectonic evolution of the LoCR region and to examine potential inconsistencies of the spatio-temporal evolution of the late Cenozoic Pacific-North America plate boundary. Based on revised palinspastic reconstructions and remaining inconsistencies, we hypothesize that (1) late Miocene transtensional faulting related to the Gulf of California shear zone and eastern California shear zone promoted tectonic subsidence in the LoCR region that permitted the subsequent southward lake spillover of the Colorado River and connection with the northern Gulf of California, (2) distributed Pliocene transtensional faulting likely occurred within the southern LoCR region, and is presently unaccounted for in most studies of geologic units related to the Pliocene Colorado River, and (3) the Chocolate Mountains anticlinorium can be reconstructed to a broadly linear, E-W-oriented structure at ca. 11 Ma, consistent with reconstruction of several other strain markers along the southern San Andreas Fault system.

Lower Colorado River↗

High‐resolution trench photomosaics from image‐based modeling: Workflow and error analysis

Photomosaics are commonly used to construct maps of paleoseismic trench exposures, but the conventional process of manually using image‐editing software is time consuming and produces undesirable artifacts and distortions. Herein, we document and evaluate the application of image‐based modeling (IBM) for creating photomosaics and 3D models of paleoseismic trench exposures, illustrated with a case‐study trench across the Wasatch fault in Alpine, Utah. Our results include a structure‐from‐motion workflow for the semiautomated creation of seamless, high‐resolution photomosaics designed for rapid implementation in a field setting. Compared with conventional manual methods, the IBM photomosaic method provides a more accurate, continuous, and detailed record of paleoseismic trench exposures in approximately half the processing time and 15%–20% of the user input time. Our error analysis quantifies the effect of the number and spatial distribution of control points on model accuracy. For this case study, an ∼87 m 2 exposure of a benched trench photographed at viewing distances of 1.5–7 m yields a model with <2 cm root mean square error (rmse) with as few as six control points. Rmse decreases as more control points are implemented, but the gains in accuracy are minimal beyond 12 control points. Spreading control points throughout the target area helps to minimize error. We propose that 3D digital models and corresponding photomosaics should be standard practice in paleoseismic exposure archiving. The error analysis serves as a guide for future investigations that seek balance between speed and accuracy during photomosaic and 3D model construction.

Bulletin of the Seismological Society of America↗

Stratigraphy and structural development of the southwest Isla Tiburón marine basin: Implications for latest Miocene tectonic opening and flooding of the northern Gulf of California

Accurate information on the timing of earliest marine incursion into the Gulf of California (northwestern M&eacute;xico) is critical for paleogeographic models and for understanding the spatial and temporal evolution of strain accommodation across the obliquely divergent Pacific-North America plate boundary. Marine strata exposed on southwest Isla Tibur&oacute;n (SWIT) have been cited as evidence for a middle Miocene marine incursion into the Gulf of California at least 7 m.y. prior to plate boundary localization ca. 6 Ma. A middle Miocene interpretation for SWIT marine deposits has played a large role in subsequent interpretations of regional tectonics and rift evolution, the ages of marine basins containing similar fossil assemblages along ~1300 km of the plate boundary, and the timing of marine incursion into the Gulf of California. We report new detailed geologic mapping and geochronologic data from the SWIT basin, an elongate sedimentary basin associated with deformation along the dextral-oblique La Cruz fault. We integrate these results with previously published biostratigraphic and geochronologic data to bracket the age of marine deposits in the SWIT basin and show that they have a total maximum thickness of ~300 m. The 6.44 &plusmn; 0.05 Ma (Ar/Ar) tuff of Hast Pitzcal is an ash-flow tuff stratigraphically below the oldest marine strata, and the 6.01 &plusmn; 0.20 Ma (U/Pb) tuff of Oyster Amphitheater, also an ash-flow tuff, is interbedded with marine conglomerate near the base of the marine section. A dike-fed rhyodacite lava flow that caps all marine strata yields ages of 3.51 &plusmn; 0.05 Ma (Ar/Ar) and 4.13 &plusmn; 0.09 Ma (U/Pb) from the base of the flow, consistent with previously reported ages of 4.16 &plusmn; 1.81 Ma (K-Ar) from the flow top and (K-Ar) 3.7 &plusmn; 0.9 Ma from the feeder dike. Our new results confirm a latest Miocene to early Pliocene age for the SWIT marine basin, consistent with previously documented latest Miocene to early Pliocene (ca. 6.2-4.3 Ma) planktonic and benthic foraminifera from this section. Results from biostratigraphy and geochronology thus constrain earliest marine deposition on SWIT to ca. 6.2 &plusmn; 0.2 Ma, coincident with a regional-scale latest Miocene marine incursion into the northern proto-Gulf of California. This regional marine incursion flooded the northernmost, >500-km-long portion of the Gulf of California shear zone, a narrow belt of localized strike-slip faulting, clockwise block rotation, and subsiding pull-apart basins. Oblique Pacific-North America relative plate motion gradually localized in the >1000-km-long Gulf of California shear zone ca. 9-6 Ma, subsequently permitting the punctuated south to north flooding of the incipient Gulf of California seaway.

Gulf of California↗

Assessing the geologic and climatic forcing of biodiversity and evolution surrounding the Gulf of California

For almost a century the Baja California peninsula (Peninsula), Gulf of California (Gulf), and broader Sonoran Desert region (figure 1) have drawn geologists and biologists alike to study its unique physical and evolutionary processes (e.g., Wittich 1920; Darton 1921; Nelson 1921; Johnston 1924; Beal 1948; Durham and Allison 1960). The challenge remains to untangle the long, intricate, and at times enigmatic geological and climatological histories that have shaped the high levels of endemism and biodiversity observed in the region today (Van Devender 1990; Grismer 2000; Riddle et al. 2000).

Gulf of California↗