Search USGS⌕ Search

Geology topics

Russell G. Tysdal

Publications and source records attributed to Russell G. Tysdal.

At least 19 recordsLinked to original sources
USGS2011

Structural controls and evolution of gold-, silver-, and REE-bearing copper-cobalt ore deposits, Blackbird district, east-central Idaho: Epigenetic origins

The Cu-Co ± Au (± Ag ± Ni ± REE) ore deposits of the Blackbird district, east-central Idaho, have previously been classified as Besshi-type VMS, sedex, and IOCG deposits within an intact stratigraphic section. New studies indicate that, across the district, mineralization was introduced into the country rocks as a series of structurally controlled vein and alteration systems. Quartz-rich and biotite-rich veins (and alteration zones) and minor albite and siderite veinlets maintain consistent order and sulfide mineral associations across the district. Both early and late quartz veins contain chalcopyrite and pyrite, whereas intermediate-stage tourmaline-biotite veins host the cobaltite. Barren early and late albite and late carbonate (generally siderite) form veins or are included in the quartz veins. REE minerals, principally monazite, allanite, and xenotime, are associated with both tourmaline-biotite and late quartz veins. The veins are in mineralized intervals along axial planar cleavage, intrafolial foliation, and shears. Mineralized intervals are hosted by a variety of metasedimentary rocks, including three phyllitic units of Mesoproterozoic age and two schistose units. All of these units are S-tectonites in the footwall of a regional thrust fault. Specifically, the district lies within an oblique thrust ramp containing a series of structural horses (three domains) in a duplex system. The deposits span the three domains and are hosted by metamorphic rocks that range from lower amphibolite facies in the structurally upper domain to lower-middle greenschist facies in the lower domain (an inverted metamorphic sequence). Early quartz and biotite veins were introduced during progressive folding and prolonged peak metamorphic conditions and they underwent late-tectonic retrograde recrystallization and metamorphic mineral growth, to the same extent as the country rocks in each domain. Where little subsequent deformation occurred, early veins are discordant to bedding but, where folding was polyphase and fabrics are penetrative, mineralized zones are concordant with metamorphic compositional layering. Late quartz veins in the zones are associated with retrograde minerals and textures and are only locally deformed. 40 Ar/ 39 Ar dating of unoriented muscovite from the selvage of a late quartz vein yields a Late Cretaceous age of about 83 Ma, the time of retrograde metamorphism associated with introduction of late quartz veins. Textural data at all scales indicate that the host sites for veins and the tectonic evolution of both host rocks and mineral deposits were kinematically linked to Late Cretaceous regional thrust faulting. Heat, fluids, and conduits for generation and circulation of fluids were part of the regional crustal thickening. The faulting also juxtaposed metaevaporite layers in the Mesoproterozoic Yellowjacket Formation over Blackbird district host rocks. We conclude that this facilitated chemical exchange between juxtaposed units resulting in leaching of critical elements (Cl, K, B, Na) from metaevaporites to produce brines, scavenging of metals (Co, Cu, etc) from rocks in the region, and, finally, concentrating metals in the lower-plate ramp structures. Although the ultimate source of the metals remains undetermined, the present Cu-Co ± Au (± Ag ± Ni ± REE) Blackbird ore deposits formed during Late Cretaceous compressional deformation .

Idaho↗
USGS2004

Chapter 8 Petrogenesis and mineralogic residence of selected elements in the meade peak phosphatic shale member of the permian phosphoria formation, Southeast Idaho

The Meade Peak Phosphatic Shale Member of the Permian Phosphoria Formation hosts the ore mined by the phosphate industry of southeast Idaho. It also hosts environmentally sensitive elements (ESE) such as Se, As, Hg, Ni, Cd, Zn, and Cr. Primary chemistry, elemental distribution patterns, and mineralogy within the Meade Peak were modified by element migration and possibly the introduction of elements. Fluids moved within the Meade Peak throughout its history, although the passage of fluids was highly variable in space and time, resulting in small domains of different rock chemistry and different mineralogy. Timing of major events affecting the Meade Peak and mineral habit are used to differentiate among detrital, diagenetic, epigenetic, and supergene mineral assemblages. Cross-cutting relationships among minerals are too rare to provide much paragenetic infor- mation. Carbonate fluorapatite (CFA) occurs in several forms, but dominantly as pelloids, some of which may have formed in situ during diagenesis. The other volumetrically signifi- cant form of CFA is interstitial cement that formed during diagenesis. Beginning during diagenesis and continuing intermittently, multiple generations of carbonate (dolomite and calcite) formed overgrowths and texturally complex carbonate cements. Movement and precipitation of silica followed a similar pattern. The ammonium feldspar buddingtonite, which generally rims orthoclase, also formed during diagenesis. Bacteria apparently played a significant role during diagenesis as well as during supergene processes, resulting in extreme fractionation of S isotopes and the possible bacterially mediated formation of minerals such as glauconite and sphalerite. Catagenesis, apparently culminating in oil generation, was the last significant diagenetic change. Thrusting accompanied by fluid (oil and brine) migration began during catagenesis in the Late Jurassic or Cretaceous and continued into the early Eocene. Fluorite ± carbonate ± barite± bitumen veins formed as a result of brittle deformation and accompanying fluid movement. This fracturing event may have been associated with a period of extension and normal faulting (Neogene to Holocene). Passage of the Yellowstone hot spot to the north of the area during the Neogene is marked by silicic domes and basaltic flows. The enrichment of Hg in fracture coatings might be the result of deposition from warm fluids associated with the emplacement of the silicic domes or a generally elevated, regional thermal gradient associated with the volcanism. Many of the fracture systems are still open and continue to provide fluid pathways that are the primary depositional sites for a wide variety of supergene minerals (such as Se, efflorescent salts) and element associations (such as Hg, Cd-S, Fe-Cr-O) in which many of the ESE are concentrated. Native Se is the most commonly identified host of Se in the studied samples. The largest concentration of Se occurs in open-fracture systems that cross-cut waste rock and ore units. The age(s) of native Se formation is not known; how- ever, the latest period of Se mobility is the present. Direct measurement of efflorescent “salts” forming on new mine faces indicate that several ESE, including both Se and Zn, are concentrated on the faces soon after they are exposed. Zinc is present as hydrous sulfates, but the residence of Se in these “salts” is unknown.

Idaho↗
USGS2003

Correlation, sedimentology, structural setting, chemical composition, and provenance of selected formations in Mesoproterozoic Lemhi Group, central Idaho

A unit of the Mesoproterozoic Apple Creek Formation of the Lemhi Range previously was correlated with part of the lower subunit of the Mesoproterozoic Yellowjacket Formation in the Salmon River Mountains. Strata currently assigned to the middle subunit of the Yellowjacket Formation lie conformably above the Apple Creek unit in the Salmon River Mountains, and are here renamed the banded siltite unit and reassigned to the Apple Creek Formation. Almost all of the banded siltite unit is preserved within the Salmon River Mountains, where it grades upward into clastic rocks that currently are assigned to the upper subunit of the Yellowjacket Formation and that here are reassigned to the Gunsight Formation. The banded siltite unit of the Apple Creek Formation is composed of a turbidite sequence, as recognized by previous workers. Uppermost strata of the unit were reworked by currents, possibly storm generated, and adjusted to a high water content by developing abundant soft-sediment deformation features. Basal strata of the overlying Gunsight Formation in the Salmon River Mountains display abundant hummocky crossbeds, storm-generated features deposited below fair-weather wave base, that are conformable above the storm-reworked deposits. The hummocky crossbedded strata grade upward into marine shoreface strata deposited above fair-weather wave base, which in turn are succeeded by fluvial strata. Hummocky and shoreface strata are absent from the Gunsight Formation in the Lemhi Range. The major thickness of the Gunsight Formation in both the Salmon River Mountains and the Lemhi Range is composed of fluvial rocks, transitional in the upper part into marine rocks of the Swauger Formation. The fluvial strata are mainly characterized by stacked sheets of metasandstone and coarse siltite; they are interpreted as deposits of braided rivers. The Poison Creek thrust fault of the Lemhi Range extends northwestward through the study area in the east-central part of the Salmon River Mountains. The Apple Creek and Gunsight Formations on the southwest side of the thrust fault were transported to the northeast as part of the Poison Creek thrust sheet. A segment of the thrust fault within the Gunsight Formation in the Salmon River Mountains subsequently underwent normal displacement. Along this segment, lower Gunsight strata on the southwest were juxtaposed against upper Gunsight and Swauger strata on the northeast.

Professional Paper↗
USGS2002

Statistical tables and charts showing geochemical variation in the Mesoproterozoic Big Creek, Apple Creek, and Gunsight formations, Lemhi group, Salmon River Mountains and Lemhi Range, central Idaho

The principal purpose of this report is to provide a reference archive for results of a statistical analysis of geochemical data for metasedimentary rocks of Mesoproterozoic age of the Salmon River Mountains and Lemhi Range, central Idaho. Descriptions of geochemical data sets, statistical methods, rationale for interpretations, and references to the literature are provided. Three methods of analysis are used: R-mode factor analysis of major oxide and trace element data for identifying petrochemical processes, analysis of variance for effects of rock type and stratigraphic position on chemical composition, and major-oxide ratio plots for comparison with the chemical composition of common clastic sedimentary rocks.

Idaho↗
USGS2002

Structural geology of western part of Lemhi Range, east-central Idaho

The Poison Creek Anticline is a major fold that occupies a large part of the western part of the Lemhi Range. The fold is now broken by normal faults, but removal of displacement on the normal faults permitted reconstruction of the anticline. The fold formed during late Mesozoic compressional deformation in the hinterland of the Cordilleran thrust belt. It is in the hanging wall of the Poison Creek thrust fault, a major fault in east-central Idaho, that displaced Proterozoic strata over lower Paleozoic rocks.

Idaho↗
USGS2000

Stratigraphy and depositional environments of middle Proterozoic rocks, northern part of the Lemhi Range, Lemhi County, Idaho

Geologic mapping shows Middle Proterozoic strata form two packages of strata north and south of the Tertiary Lem Peak normal fault. Strata north of the fault, the main focus of this report, contain thicknesses and lithofacies of the Big Creek and Apple Creek formations of the Lemhi Group that contrast with those south of the fault. Strata south of the fault, examined mainly in reconnaissance, may have been thrust eastward prior to being downdropped.

Idaho↗
USGS2000

Revision of middle Proterozoic Yellowjacket Formation, central Idaho, and revision of Cretaceous Slim Sam Formation, Elkhorn Mountains area, Montana

The Yellowjacket Formation is restricted to the strata originally assigned to it by Ross (1934). The Yellowjacket, the conformably overlying Hoodoo Quartzite, and succeeding unnamed argillaceous quartzite unit form a genetically related sequence that lies in a structural block delimited on the northeast by the Iron Lake fault. Directly northeast of the fault, strata currently assigned by others to the lower subunit of the Yellowjacket are correlated with the Apple Creek Formation in the Lemhi Range. Mapping in the western part of the Lemhi Range shows that the Apple Creek Formation lies depositionally above the Big Creek Formation and that no rocks of the Yellowjacket-Hoodoo unnamed unit stratigraphic sequence are present. In contrast, in the area of the Yellowjacket mapped by Ross (1934) and the area directly northeast of the Iron Lake Fault, the Big Creek Formation is absent, even though it is 2,700 m thick in the Lemhi Range. These data indicate that the Iron Lake Fault juxtaposed the Yellowjacket-Hoodoo-unnamed unit sequence against non-Yellowjacket strata to the northeast. The Upper Cretaceous Slim Sam Formation of the Elkhorn Mountains area is revised. Strata of the lower part are correlated with the regionally recognized marine Telegraph Creek Formation and the overlying marine to marginal marine Eagle Sandstone. Only lower strata of the Eagle are present in the study area and they are preserved discontinously. The nonmarine volcanic and volcaniclastic rocks of the upper part of the Slim Sam as originally defined retain the name Slim Sam Formation. These rocks, mainly of sedimentary origin, are genetically related to the Elkhorn Mountains Volcanics. The lower contact of the Slim Sam (restricted) is unconformable above the Eagle Sandstone or more commonly above the Telegraph Creek Formation. The upper contact is conformable with the Elkhorn Mountains Volcanics.

Idaho, Montana↗
USGS1988

Deformation along the northeast side of Blacktail Mountains salient, southwestern Montana

The Blacktail Mountains salient is a convex-eastward area of stacked Laramide-age thrust faults that trend north and dip west at moderate angles. The thrusts occur in Mississippian to Cretaceous strata above a basement of Archean metamorphic rocks. The northern margin of the salient is delimited by the Jake Canyon fault, a northwest-trending, northeast-dipping Laramide reverse fault. During the Laramide orogeny, the fault formed a common boundary of the present-day Blacktail Mountains and a structural high that existed in the area of the present-day valley of Blacktail Deer Creek. The fault juxtaposed Archean metamorphic rocks upon Phanerozoic strata in the northwest-era half of its extent, and against other Archean metamorphic rocks in the southeastern half. General structural relationships and study of small-scale structures in local areas show that movement along the Jake Canyon fault caused deformation of the north-trending thrust faults and associated folds. During Cenozoic extensional faulting, the Blacktail fault developed northeast of the Jake Canyon fault, and generally delimits the southwestern side of the basin of sedimentary rocks that lies beneath the valley of Blacktail Deer Creek.

Idaho, Montana↗