Search USGSSearch

Geology topics

Roland J. Viger

Publications and source records attributed to Roland J. Viger.

At least 37 records · Page 2Linked to original sources

The effects of Missouri River mainstem reservoir system operations on 2011 flooding using a Precipitation-Runoff Modeling System model

In 2011 the Missouri River Mainstem Reservoir System (Reservoir System) experienced the largest volume of flood waters since the initiation of record-keeping in the nineteenth century. The high levels of runoff from both snowpack and rainfall stressed the Reservoir System’s capacity to control flood waters and caused massive damage and disruption along the river. The flooding and resulting damage along the Missouri River brought increased public attention to the U.S. Army Corps of Engineers (USACE) operation of the Reservoir System. To help understand the effects of Reservoir System operation on the 2011 Missouri River flood flows, the U.S. Geological Survey Precipitation-Runoff Modeling System was used to construct a model of the Missouri River Basin to simulate flows at streamgages and dam locations with the effects of Reservoir System operation (regulation) on flow removed. Statistical tests indicate that the Missouri River Precipitation-Runoff Modeling System model is a good fit for high-flow monthly and annual stream flow estimation. A comparison of simulated unregulated flows and measured regulated flows show that regulation greatly reduced spring peak flow events, consolidated two summer peak flow events to one with a markedly decreased magnitude, and maintained higher than normal base flow beyond the end of water year 2011. Further comparison of results indicate that without regulation, flows greater than those measured would have occurred and been sustained for much longer, frequently in excess of 30 days, and flooding associated with high-flow events would have been more severe.

Colorado, Iowa, Kansas, Minnesota, Missouri, Monta

U.S. Geological Survey core science systems strategy: Characterizing, synthesizing, and understanding the critical zone through a modular science framework

Executive Summary Core Science Systems is a new mission of the U.S. Geological Survey (USGS) that resulted from the 2007 Science Strategy, “Facing Tomorrow’s Challenges: U.S. Geological Survey Science in the Decade 2007–2017.” This report describes the Core Science Systems vision and outlines a strategy to facilitate integrated characterization and understanding of the complex Earth system. The vision and suggested actions are bold and far-reaching, describing a conceptual model and framework to enhance the ability of the USGS to bring its core strengths to bear on pressing societal problems through data integration and scientific synthesis across the breadth of science. The context of this report is inspired by a direction set forth in the 2007 Science Strategy. Specifically, ecosystem-based approaches provide the underpinnings for essentially all science themes that define the USGS. Every point on Earth falls within a specific ecosystem where data, other information assets, and the expertise of USGS and its many partners can be employed to quantitatively understand how that ecosystem functions and how it responds to natural and anthropogenic disturbances. Every benefit society obtains from the planet— food, water, raw materials to build infrastructure, homes and automobiles, fuel to heat homes and cities, and many others— are derived from or affect ecosystems. The vision for Core Science Systems builds on core strengths of the USGS in characterizing and understanding complex Earth and biological systems through research, modeling, mapping, and the production of high quality data on the Nation’s natural resource infrastructure. Together, these research activities provide a foundation for ecosystem-based approaches through geologic mapping, topographic mapping, and biodiversity mapping. The vision describes a framework founded on these core mapping strengths that makes it easier for USGS scientists to discover critical information, share and publish results, and identify potential collaborations that transcend all USGS missions. The framework is designed to improve the efficiency of scientific work within USGS by establishing a means to preserve and recall data for future applications, organizing existing scientific knowledge and data to facilitate new use of older information, and establishing a future workflow that naturally integrates new data, applications, and other science products to make interdisciplinary research easier and more efficient. Given the increasing need for integrated data and interdisciplinary approaches to solve modern problems, leadership by the Core Science Systems mission will facilitate problem solving by all USGS missions in ways not formerly possible. The report lays out a strategy to achieve this vision through three goals with accompanying objectives and actions. The first goal builds on and enhances the strengths of the Core Science Systems mission in characterizing and understanding the Earth system from the geologic framework to the topographic characteristics of the land surface and biodiversity across the Nation. The second goal enhances and develops new strengths in computer and information science to make it easier for USGS scientists to discover data and models, share and publish results, and discover connections between scientific information and knowledge. The third goal brings additional focus to research and development methods to address complex issues affecting society that require integration of knowledge and new methods for synthesizing scientific information. Collectively, the report lays out a strategy to create a seamless connection between all USGS activities to accelerate and make USGS science more efficient by fully integrating disciplinary expertise within a new and evolving science paradigm for a changing world in the 21st century.

Circular

Application of the Precipitation-Runoff Modeling System (PRMS) in the Apalachicola-Chattahoochee-Flint River Basin in the southeastern United States

A hydrologic model of the Apalachicola–Chattahoochee–Flint River Basin (ACFB) has been developed as part of a U.S. Geological Survey (USGS) National Climate Change and Wildlife Science Center effort to provide integrated science that helps resource managers understand the effect of climate change on a range of ecosystem responses. The hydrologic model was developed as part of the Southeast Regional Assessment Project using the Precipitation Runoff Modeling System (PRMS), a deterministic, distributed-parameter, process-based system that simulates the effects of precipitation, temperature, and land use on basin hydrology. The ACFB PRMS model simulates streamflow throughout the approximately 50,700 square-kilometer basin on a daily time step for the period 1950–99 using gridded climate forcings of air temperature and precipitation, and parameters derived from spatial data layers of altitude, land cover, soils, surficial geology, depression storage (small water bodies), and data from 56 USGS streamgages. Measured streamflow data from 35 of the 56 USGS streamgages were used to calibrate and evaluate simulated basin streamflow; the remaining gage locations were used for model delineation only. The model matched measured daily streamflow at 31 of the 35 calibration gages with Nash-Sutcliffe Model Efficiency Index (NS) greater than 0.6. Streamflow data for some calibration gages were augmented for regulation and water use effects to represent more natural flow volumes. Time-static parameters describing land cover limited the ability of the simulation to match historical runoff in the more developed subbasins. Overall, the PRMS simulation of the ACFB provides a good representation of basin hydrology on annual and monthly time steps. Calibration subbasins were analyzed by separating the 35 subbasins into five classes based on physiography, land use, and stream type (tributary or mainstem). The lowest NS values were rarely below 0.6, whereas the median NS for all five classes was within 0.74 to 0.96 for annual mean streamflow, 0.89 to 0.98 for mean monthly streamflow, and 0.82 to 0.98 for monthly mean streamflow. The median bias for all five classes was within –4.3 to 0.8 percent for annual mean streamflow, –6.3 to 0.5 percent for mean monthly streamflow, and –9.3 to 1.3 percent for monthly mean streamflow. The NS results combined with the percent bias results indicated a good to very good streamflow volume simulation for all subbasins. This simulation of the ACFB provides a foundation for future modeling and interpretive studies. Streamflow and other components of the hydrologic cycle simulated by PRMS can be used to inform other types of simulations; water-temperature, hydrodynamic, and ecosystem-dynamics simulations are three examples. In addition, possible future hydrologic conditions could be studied using this model in combination with land cover projections and downscaled general circulation model results.

Alabama, Florida, Georgia

Science strategy for Core Science Systems in the U.S. Geological Survey, 2013-2023

Core Science Systems is a new mission of the U.S. Geological Survey (USGS) that grew out of the 2007 Science Strategy, “Facing Tomorrow’s Challenges: U.S. Geological Survey Science in the Decade 2007–2017.” This report describes the vision for this USGS mission and outlines a strategy for Core Science Systems to facilitate integrated characterization and understanding of the complex earth system. The vision and suggested actions are bold and far-reaching, describing a conceptual model and framework to enhance the ability of USGS to bring its core strengths to bear on pressing societal problems through data integration and scientific synthesis across the breadth of science. The context of this report is inspired by a direction set forth in the 2007 Science Strategy. Specifically, ecosystem-based approaches provide the underpinnings for essentially all science themes that define the USGS. Every point on earth falls within a specific ecosystem where data, other information assets, and the expertise of USGS and its many partners can be employed to quantitatively understand how that ecosystem functions and how it responds to natural and anthropogenic disturbances. Every benefit society obtains from the planet—food, water, raw materials to build infrastructure, homes and automobiles, fuel to heat homes and cities, and many others, are derived from or effect ecosystems. The vision for Core Science Systems builds on core strengths of the USGS in characterizing and understanding complex earth and biological systems through research, modeling, mapping, and the production of high quality data on the nation’s natural resource infrastructure. Together, these research activities provide a foundation for ecosystem-based approaches through geologic mapping, topographic mapping, and biodiversity mapping. The vision describes a framework founded on these core mapping strengths that makes it easier for USGS scientists to discover critical information, share and publish results, and identify potential collaborations that transcend all USGS missions. The framework is designed to improve the efficiency of scientific work within USGS by establishing a means to preserve and recall data for future applications, organizing existing scientific knowledge and data to facilitate new use of older information, and establishing a future workflow that naturally integrates new data, applications, and other science products to make it easier and more efficient to conduct interdisciplinary research over time. Given the increasing need for integrated data and interdisciplinary approaches to solve modern problems, leadership by the Core Science Systems mission will facilitate problem solving by all USGS missions in ways not formerly possible. The report lays out a strategy to achieve this vision through three goals with accompanying objectives and actions. The first goal builds on and enhances the strengths of the Core Science Systems mission in characterizing and understanding the earth system from the geologic framework to the topographic characteristics of the land surface and biodiversity across the nation. The second goal enhances and develops new strengths in computer and information science to make it easier for USGS scientists to discover data and models, share and publish results, and discover connections between scientific information and knowledge. The third goal brings additional focus to research and development methods to address complex issues affecting society that require integration of knowledge and new methods for synthesizing scientific information. Collectively, the report lays out a strategy to create a seamless connection between all USGS activities to accelerate and make USGS science more efficient by fully integrating disciplinary expertise within a new and evolving science paradigm for a changing world in the 21st century.

Open-File Report

Integrated watershed-scale response to climate change for selected basins across the United States

A study by the U.S. Geological Survey (USGS) evaluated the hydrologic response to different projected carbon emission scenarios of the 21st century using a hydrologic simulation model. This study involved five major steps: (1) setup, calibrate and evaluated the Precipitation Runoff Modeling System (PRMS) model in 14 basins across the United States by local USGS personnel; (2) acquire selected simulated carbon emission scenarios from the World Climate Research Programme's Coupled Model Intercomparison Project; (3) statistical downscaling of these scenarios to create PRMS input files which reflect the future climatic conditions of these scenarios; (4) generate PRMS projections for the carbon emission scenarios for the 14 basins; and (5) analyze the modeled hydrologic response. This report presents an overview of this study, details of the methodology, results from the 14 basin simulations, and interpretation of these results. A key finding is that the hydrological response of the different geographical regions of the United States to potential climate change may be different, depending on the dominant physical processes of that particular region. Also considered is the tremendous amount of uncertainty present in the carbon emission scenarios and how this uncertainty propagates through the hydrologic simulations.

Scientific Investigations Report

Simulations of historical and future trends in snowfall and groundwater recharge for basins draining to Long Island Sound

A regional watershed model was developed for watersheds contributing to Long Island Sound, including the Connecticut River basin. The study region covers approximately 40 900 km 2 , extending from a moderate coastal climate zone in the south to a mountainous northern New England climate zone dominated by snowmelt in the north. The input data indicate that precipitation and temperature have been increasing for the last 46 years (1961– 2006) across the region. Minimum temperature has increased more than maximum temperature over the same period (1961–2006). The model simulation indicates that there was an upward trend in groundwater recharge across most of the modeled region. However, trends in increasing precipitation and groundwater recharge are not significant at the 0.05 level if the drought of 1961–67 is removed from the time series. The trend in simulated snowfall is not significant across much of the region, although there is a significant downward trend in southeast Connecticut and in central Massachusetts. To simulate future trends, two input datasets, one assuming high carbon emissions and one assuming low carbon emissions, were developed from GCM forecasts. Under both of the carbon emission scenarios, simulations indicate that historical trends will continue, with increases in groundwater recharge over much of the region and substantial snowfall decreases across Massachusetts, Connecticut, southern Vermont, and southern New Hampshire. The increases in groundwater recharge and decreases in snowfall are most pronounced for the high emission scenario.

Connecticut, Massachusetts, New Hampshire, Rhode I

Hydrologic effects of urbanization and climate change on the Flint River Basin, Georgia

The potential effects of long-term urbanization and climate change on the freshwater resources of the Flint River basin were examined by using the Precipitation-Runoff Modeling System (PRMS). PRMS is a deterministic, distributed-parameter watershed model developed to evaluate the effects of various combinations of precipitation, temperature, and land cover on streamflow and multiple intermediate hydrologic states. Precipitation and temperature output from five general circulation models (GCMs) using one current and three future climate-change scenarios were statistically downscaled for input into PRMS. Projections of urbanization through 2050 derived for the Flint River basin by the Forecasting Scenarios of Future Land-Cover (FORE-SCE) land-cover change model were also used as input to PRMS. Comparison of the central tendency of streamflow simulated based on the three climate-change scenarios showed a slight decrease in overall streamflow relative to simulations under current conditions, mostly caused by decreases in the surface- runoff and groundwater components. The addition of information about forecasted urbanization of land surfaces to the hydrologic simulation mitigated the decreases in streamflow, mainly by increasing surface runoff.

Georgia

Description and testing of the Geo Data Portal: Data integration framework and Web processing services for environmental science collaboration

Interest in sharing interdisciplinary environmental modeling results and related data is increasing among scientists. The U.S. Geological Survey Geo Data Portal project enables data sharing by assembling open-standard Web services into an integrated data retrieval and analysis Web application design methodology that streamlines time-consuming and resource-intensive data management tasks. Data-serving Web services allow Web-based processing services to access Internet-available data sources. The Web processing services developed for the project create commonly needed derivatives of data in numerous formats. Coordinate reference system manipulation and spatial statistics calculation components implemented for the Web processing services were confirmed using ArcGIS 9.3.1, a geographic information science software package. Outcomes of the Geo Data Portal project support the rapid development of user interfaces for accessing and manipulating environmental data.

Open-File Report

Effects of including surface depressions in the application of the Precipitation-Runoff Modeling System in the Upper Flint River Basin, Georgia

This report documents an extension of the Precipitation Runoff Modeling System that accounts for the effect of a large number of water-holding depressions in the land surface on the hydrologic response of a basin. Several techniques for developing the inputs needed by this extension also are presented. These techniques include the delineation of the surface depressions, the generation of volume estimates for the surface depressions, and the derivation of model parameters required to describe these surface depressions. This extension is valuable for applications in basins where surface depressions are too small or numerous to conveniently model as discrete spatial units, but where the aggregated storage capacity of these units is large enough to have a substantial effect on streamflow. In addition, this report documents several new model concepts that were evaluated in conjunction with the depression storage functionality, including: ?hydrologically effective? imperviousness, rates of hydraulic conductivity, and daily streamflow routing. All of these techniques are demonstrated as part of an application in the Upper Flint River Basin, Georgia. Simulated solar radiation, potential evapotranspiration, and water balances match observations well, with small errors for the first two simulated data in June and August because of differences in temperatures from the calibration and evaluation periods for those months. Daily runoff simulations show increasing accuracy with streamflow and a good fit overall. Including surface depression storage in the model has the effect of decreasing daily streamflow for all but the lowest flow values. The report discusses the choices and resultant effects involved in delineating and parameterizing these features. The remaining enhancements to the model and its application provide a more realistic description of basin geography and hydrology that serve to constrain the calibration process to more physically realistic parameter values.

Georgia

An Overview of the GIS Weasel

This fact sheet provides a high-level description of the GIS Weasel, a software system designed to aid users in preparing spatial information as input to lumped and distributed parameter environmental simulation models (ESMs). The GIS Weasel provides geographic information system (GIS) tools to help create maps of geographic features relevant to the application of a user?s ESM and to generate parameters from those maps. The operation of the GIS Weasel does not require a user to be a GIS expert, only that a user has an understanding of the spatial information requirements of the model. The GIS Weasel software system provides a GIS-based graphical user interface (GUI), C programming language executables, and general utility scripts. The software will run on any computing platform where ArcInfo Workstation (version 8.1 or later) and the GRID extension are accessible. The user controls the GIS Weasel by interacting with menus, maps, and tables.

Fact Sheet

Estimated Probability of Post-Wildfire Debris-Flow Occurrence and Estimated Volume of Debris Flows from a Pre-Fire Analysis in the Three Lakes Watershed, Grand County, Colorado

Debris flows pose substantial threats to life, property, infrastructure, and water resources. Post-wildfire debris flows may be of catastrophic proportions compared to debris flows occurring in unburned areas. During 2006, the U.S. Geological Survey (USGS), in cooperation with the Northern Colorado Water Conservancy District, initiated a pre-wildfire study to determine the potential for post-wildfire debris flows in the Three Lakes watershed, Grand County, Colorado. The objective was to estimate the probability of post-wildfire debris flows and to estimate the approximate volumes of debris flows from 109 subbasins in the Three Lakes watershed in order to provide the Northern Colorado Water Conservancy District with a relative measure of which subbasins might constitute the most serious debris flow hazards. This report describes the results of the study and provides estimated probabilities of debris-flow occurrence and the estimated volumes of debris flow that could be produced in 109 subbasins of the watershed under an assumed moderate- to high-burn severity of all forested areas. The estimates are needed because the Three Lakes watershed includes communities and substantial water-resources and water-supply infrastructure that are important to residents both east and west of the Continental Divide. Using information provided in this report, land and water-supply managers can consider where to concentrate pre-wildfire planning, pre-wildfire preparedness, and pre-wildfire mitigation in advance of wildfires. Also, in the event of a large wildfire, this information will help managers identify the watersheds with the greatest post-wildfire debris-flow hazards.

Scientific Investigations Map

Section 4. The GIS Weasel User's Manual

INTRODUCTION The GIS Weasel was designed to aid in the preparation of spatial information for input to lumped and distributed parameter hydrologic or other environmental models. The GIS Weasel provides geographic information system (GIS) tools to help create maps of geographic features relevant to a user's model and to generate parameters from those maps. The operation of the GIS Weasel does not require the user to be a GIS expert, only that the user have an understanding of the spatial information requirements of the environmental simulation model being used. The GIS Weasel software system uses a GIS-based graphical user interface (GUI), the C programming language, and external scripting languages. The software will run on any computing platform where ArcInfo Workstation (version 8.0.2 or later) and the GRID extension are accessible. The user controls the processing of the GIS Weasel by interacting with menus, maps, and tables. The purpose of this document is to describe the operation of the software. This document is not intended to describe the usage of this software in support of any particular environmental simulation model. Such guides are published separately.

Techniques and Methods

Step wise, multiple objective calibration of a hydrologic model for a snowmelt dominated basin

The ability to apply a hydrologic model to large numbers of basins for forecasting purposes requires a quick and effective calibration strategy. This paper presents a step wise, multiple objective, automated procedure for hydrologic model calibration. This procedure includes the sequential calibration of a model's simulation of solar radiation (SR), potential evapotranspiration (PET), water balance, and daily runoff. The procedure uses the Shuffled Complex Evolution global search algorithm to calibrate the U.S. Geological Survey's Precipitation Runoff Modeling System in the Yampa River basin of Colorado. This process assures that intermediate states of the model (SR and PET on a monthly mean basis), as well as the water balance and components of the daily hydrograph are simulated, consistently with measured values.

Journal of the American Water Resources Associatio

The GIS weasel - An interface for the development of spatial information in modeling

The GIS Weasel is a map and Graphical User Interface (GUI) driven tool that has been developed as an aid to modelers in the delineation, characterization of geographic features, and their parameterization for use in distributed or lumped parameter physical process models. The interface does not require user expertise in geographic information systems (GIS). The user does need knowledge of how the model will use the output from the GIS Weasel. The GIS Weasel uses Workstation ArcInfo and its the Grid extension. The GIS Weasel will run on all platforms that Workstation ArcInfo runs (i.e. numerous flavors of Unix and Microsoft Windows).The GIS Weasel requires an input ArcInfo grid of some topographical description of the Area of Interest (AOI). This is normally a digital elevation model, but can be the surface of a ground water table or any other data that flow direction can be resolved from. The user may define the AOI as a custom drainage area based on an interactively specified watershed outlet point, or use a previously created map. The user is then able to use any combination of the GIS Weasel's tool set to create one or more maps for depicting different kinds of geographic features. Once the spatial feature maps have been prepared, then the GIS Weasel s many parameterization routines can be used to create descriptions of each element in each of the user s created maps. Over 200 parameterization routines currently exist, generating information about shape, area, and topological association with other features of the same or different maps, as well many types of information based on ancillary data layers such as soil and vegetation properties. These tools easily integrate other similarly formatted data sets.

Conference Paper

A modular approach to addressing model design, scale, and parameter estimation issues in distributed hydrological modelling

A modular approach to model design and construction provides a flexible framework in which to focus the multidisciplinary research and operational efforts needed to facilitate the development, selection, and application of the most robust distributed modelling methods. A variety of modular approaches have been developed, but with little consideration for compatibility among systems and concepts. Several systems are proprietary, limiting any user interaction. The US Geological Survey modular modelling system (MMS) is a modular modelling framework that uses an open source software approach to enable all members of the scientific community to address collaboratively the many complex issues associated with the design, development, and application of distributed hydrological and environmental models. Implementation of a common modular concept is not a trivial task. However, it brings the resources of a larger community to bear on the problems of distributed modelling, provides a framework in which to compare alternative modelling approaches objectively, and provides a means of sharing the latest modelling advances. The concepts and components of the MMS are described and an example application of the MMS, in a decision-support system context, is presented to demonstrate current system capabilities. Copyright ?? 2002 John Wiley and Sons, Ltd.

Hydrological Processes

Maps showing geology, oil and gas fields and geologic provinces of the South America region

This digitally compiled map includes geology, geologic provinces, and oil and gas fields of South America. The map is part of a worldwide series on CD-ROM by World Energy Project released of the U.S. Geological Survey . The goal of the project is to assess the undiscovered, technically recoverable oil and gas resources of the world and report these results by the year 2000. For data management purposes the world is divided into eight energy regions corresponding approximately to the economic regions of the world as defined by the U.S. Department of State. South America (Region 6) includes Argentina, Bolivia, Brazil, Chile, Columbia, Ecuador, Falkland Islands, French Guiana, Guyuna, Netherlands, Netherlands Antilles, Paraguay, Peru, Suriname, Trinidad and Tobago, Uruguay, and Venezuela.

Open-File Report

Maps showing geology, oil and gas fields and geologic provinces of the Arabian Peninsula

Introduction This digital map compilation, which includes geology, geologic provinces, and oil and gas fields of the Arabian Peninsula, is part of a map series of the world produced by the U.S. Geological Survey World Energy Project. The goal of the project is to produce a worldwide assessment of the undiscovered, technically recoverable oil and gas resources and report these results by the year 2000. To assess the world's petroleum, a sequence of steps is being undertaken proceeding from defining geologic provinces of the world at a comparable scale, allocating oil and gas fields to these provinces, defining petroleum systems within these provinces, and ultimately assessing the undiscovered petroleum potential of selected provinces of the world. A more in-depth discussion of the geologic provinces and their relative ranking in terms of total known petroleum volume is given in USGS Open File Report 97-463 (see Klett and others, 1997).

Open-File Report