Geology topics

Robert L. Wesson

Publications and source records attributed to Robert L. Wesson.

At least 19 recordsLinked to original sources

USGS2026

Subaerially exposed Iceberg Lake sediments: An exceptional record of historical subaqueous earthquake disturbance at the eastern edge of the Alaskan-Aleutian subduction zone

Paleoseismic records are limited in the Yakutat Terrane (eastern edge of the Alaskan-Aleutian subduction zone) due to the extensive ice cover that hinders traditional methods such as trenching of the faults, but lacustrine sediments offer an alternative archive. We investigated lakebed sediments exposed after recent outburst floods (1999 CE) at Iceberg Lake, a glacier-dammed basin whose stratigraphy was revealed after the lake drained and partially eroded. We logged outcrops across the basin and sampled their sediments. Between annually laminated background deposits, we identified sediment gravity flow beds and in-situ soft-sediment deformation structures (convolutions, sand blows, and fractures) interpreted to be earthquake-induced. Our age model links some of the uppermost depositional and deformational events to the 1958, 1964 and 1979 CE earthquakes. These results demonstrate that Iceberg Lake was a sensitive recorder of seismic shaking and its sediments hold strong potential for producing a paleoseismic record for the northern Yakutat Terrane.

Alaska↗

USGS2020

Holocene relative sea-level change along the tectonically active Chilean coast

We present a comprehensive relative sea-level (RSL) database for north, central, and south-central Chile (18.5°S – 43.6°S) using a consistent, systematic, and internationally comparable approach. Despite its latitudinal extent, this coastline has received little rigorous or systematic attention and details of its RSL history remain largely unexplored. To address this knowledge gap, we re-evaluate the geological context and age of previously published sea-level indicators, providing 78 index points and 84 marine or terrestrial limiting points spanning from 11 ka to the present day. Many data points were originally collected for research in other fields and have not previously been examined for the information they provide on sea-level change. Additionally, we describe new sea-level data from four sites located between the Gulf of Arauco and Valdivia. By compiling RSL histories for 11 different regions, we summarise current knowledge of Chilean RSL. These histories indicate mid Holocene sea levels above present in all regions, but at highly contrasting elevations from ∼30 m to <5 m. We compare the spatiotemporal distribution of sea-level data points with a suite of glacial isostatic adjustment models and place first-order constraints on the influence of tectonic processes over 10 3 –10 4 year timescales. While seven regions indicate uplift rates <1 m ka −1 , the remaining regions may experience substantially higher rates. In addition to enabling discussion of the factors driving sea-level change, our compilation provides a resource to assist attempts to understand the distribution of archaeological, palaeoclimatic, and palaeoseismic evidence in the coastal zone and highlights directions for future sea-level research in Chile.

Quaternary Science Reviews↗

USGS2018

Back to full interseismic plate locking decades after the giant 1960 Chile earthquake

Great megathrust earthquakes arise from the sudden release of energy accumulated during centuries of interseismic plate convergence. The moment deficit (energy available for future earthquakes) is commonly inferred by integrating the rate of interseismic plate locking over the time since the previous great earthquake. But accurate integration requires knowledge of how interseismic plate locking changes decades after earthquakes, measurements not available for most great earthquakes. Here we reconstruct the post-earthquake history of plate locking at Guafo Island, above the seismogenic zone of the giant 1960 ( M w = 9.5) Chile earthquake, through forward modeling of land-level changes inferred from aerial imagery (since 1974) and measured by GPS (since 1994). We find that interseismic locking increased to ~70% in the decade following the 1960 earthquake and then gradually to 100% by 2005. Our findings illustrate the transient evolution of plate locking in Chile, and suggest a similarly complex evolution elsewhere, with implications for the time- and magnitude-dependent probability of future events.

Nature Communications↗

USGS2017

Exploring the historical earthquakes preceding the giant 1960 Chile earthquake in a time‐dependent seismogenic zone

New documentary findings and available paleoseismological evidence provide both new insights into the historical seismic sequence that ended with the giant 1960 south-central Chile earthquake and relevant information about the region’s seismogenic zone. According to the few available written records, this region was previously struck by earthquakes of varying size in 1575, 1737, and 1837. We expanded the existing compilations of the effects of the two latter using unpublished first-hand accounts found in archives in Chile, Peru, Spain, and New England. We further investigated their sources by comparing the newly unearthed historical data and available paleoseismological evidence with the effects predicted by hypothetical dislocations. The results reveal significant differences in the along-strike and depth distribution of the ruptures in 1737, 1837, and 1960. While the 1737 rupture likely occurred in the northern half of the 1960 region, on a narrow and deep portion of the megathrust, the 1837 rupture occurred mainly in the southern half and slipped over a wide range of depth. Such a wide rupture in 1837 disagrees with the narrow and shallow seismogenic zone currently inferred along this region. If in fact there is now a narrow zone where 200 years ago there was a wider one, it means that the seismogenic zone changes with time, perhaps between seismic cycles. Such change probably explains the evident variability in both size and location of the great earthquakes that have struck this region over the last centuries, as evidenced by written history, and through millennia, as inferred from paleoseismology.

Bulletin of the Seismological Society of America↗

USGS2017

Reexamination of the magnitudes for the 1906 and 1922 Chilean earthquakes using Japanese tsunami amplitudes: Implications for source depth constraints

Far-field tsunami records from the Japanese tide gauge network allow the reexamination of the moment magnitudes ( M w ) for the 1906 and 1922 Chilean earthquakes, which to date rely on limited information mainly from seismological observations alone. Tide gauges along the Japanese coast provide extensive records of tsunamis triggered by six great ( M w >8) Chilean earthquakes with instrumentally determined moment magnitudes. These tsunami records are used to explore the dependence of tsunami amplitudes in Japan on the parent earthquake magnitude of Chilean origin. Using the resulting regression parameters together with tide gauge amplitudes measured in Japan we estimate apparent moment magnitudes of M w 8.0–8.2 and M w 8.5–8.6 for the 1906 central and 1922 north-central Chile earthquakes. The large discrepancy of the 1906 magnitude estimated from the tsunami observed in Japan as compared with those previously determined from seismic waves ( M s 8.4) suggests a deeper than average source with reduced tsunami excitation. A deep dislocation along the Chilean megathrust would favor uplift of the coast rather than beneath the sea, giving rise to a smaller tsunami and producing effects consistent with those observed in 1906. The 1922 magnitude inferred from far-field tsunami amplitudes appear to better explain the large extent of damage and the destructive tsunami that were locally observed following the earthquake than the lower seismic magnitudes ( M s 8.3) that were likely affected by the well-known saturation effects. Thus, a repeat of the large 1922 earthquake poses seismic and tsunami hazards in a region identified as a mature seismic gap.

Journal of Geophysical Research B: Solid Earth↗

USGS2017

Unusual geologic evidence of coeval seismic shaking and tsunamis shows variability in earthquake size and recurrence in the area of the giant 1960 Chile earthquake

An uncommon coastal sedimentary record combines evidence for seismic shaking and coincident tsunami inundation since AD 1000 in the region of the largest earthquake recorded instrumentally: the giant 1960 southern Chile earthquake (Mw 9.5). The record reveals significant variability in the size and recurrence of megathrust earthquakes and ensuing tsunamis along this part of the Nazca-South American plate boundary. A 500-m long coastal outcrop on Isla Chiloé, midway along the 1960 rupture, provides continuous exposure of soil horizons buried locally by debris-flow diamicts and extensively by tsunami sand sheets. The diamicts flattened plants that yield geologically precise ages to correlate with well-dated evidence elsewhere. The 1960 event was preceded by three earthquakes that probably resembled it in their effects, in AD 898 - 1128, 1300 - 1398 and 1575, and by five relatively smaller intervening earthquakes. Earthquakes and tsunamis recurred exceptionally often between AD 1300 and 1575. Their average recurrence interval of 85 years only slightly exceeds the time already elapsed since 1960. This inference is of serious concern because no earthquake has been anticipated in the region so soon after the 1960 event, and current plate locking suggests that some segments of the boundary are already capable of producing large earthquakes. This long-term earthquake and tsunami history of one of the world's most seismically active subduction zones provides an example of variable rupture mode, in which earthquake size and recurrence interval vary from one earthquake to the next.

Marine Geology↗

USGS2017

Subduction zone slip variability during the last millennium, south-central Chile

The Arauco Peninsula (37°-38°S) in south-central Chile has been proposed as a possible barrier to the along-strike propagation of megathrust ruptures, separating historical earthquakes to the south (1960 AD 1837, 1737, and 1575) and north (2010 AD, 1835, 1751, 1657, and 1570) of the peninsula. However, the 2010 (M w 8.8) earthquake propagated into the Arauco Peninsula, re-rupturing part of the megathrust that had ruptured only 50 years earlier during the largest subduction zone earthquake in the instrumental record (M w 9.5). To better understand long-term slip variability in the Arauco Peninsula region, we analyzed four coastal sedimentary sections from two sites (Tirúa, 38.3°S and Quidico, 38.1°S) located within the overlap of the 2010 and 1960 ruptures to reconstruct a ∼600-year record of coseismic land-level change and tsunami inundation. Stratigraphic, lithologic, and diatom results show variable coseismic land-level change coincident with tsunami inundation of the Tirúa and Quidico marshes that is consistent with regional historical accounts of coseismic subsidence during earthquakes along the Valdivia portion of the subduction zone (1960 AD and 1575) and coseismic uplift during earthquakes along the Maule portion of the subduction zone (2010 AD, 1835, 1751). In addition, we document variable coseismic land-level change associated with three new prehistoric earthquakes and accompanying tsunamis in 1470–1570 AD, 1425–1455, and 270–410. The mixed record of coseismic subsidence and uplift that we document illustrates the variability of down-dip and lateral slip distribution at the overlap of the 2010 and 1960 ruptures, showing that ruptures have repeatedly propagated into, but not through the Arauco Peninsula and suggesting the area has persisted as a long-term impediment to slip through at least seven of the last megathrust earthquakes (∼600 years).

Quaternary Science Reviews↗

USGS2016

A 600-year-long stratigraphic record of tsunamis in south-central Chile

The stratigraphy within coastal river valleys in south-central Chile clarifies and extends the region’s history of large, earthquakes and accompanying tsunamis. Our site at Quidico (38.1°S, 73.3°W) is located in an overlap zone between ruptures of magnitude 8–9 earthquakes in 1960 and 2010, and, therefore, records tsunamis originating from subduction-zone ruptures north and south of the city of Concepción. Hand-dug pits and cores in a 3-m-thick sequence of freshwater peat in an abandoned meander (a little-examined depositional environment for tsunami deposits) and exposures along the Quidico River show five sand beds that extend as much as 1.2 km inland. Evidence for deposition of the beds by tsunamis includes tabular sand beds that are laterally extensive (>100 m), well sorted, fine upward, have sharp lower contacts, and contain diatom assemblages dominated by brackish and marine taxa. Using eyewitness accounts of tsunami inundation, 137 Cs analyses, and 14 C dating, we matched the upper four sand beds with historical tsunamis in 2010, 1960, 1835, and 1751. The oldest prehistoric bed dates to 1445–1490 CE and correlates with lacustrine and coastal records of similar-aged earthquakes and tsunamis in south-central Chile.

The Holocene↗

USGS2015

Vertical deformation through a complete seismic cycle at Isla Santa María, Chile

Individual great earthquakes are posited to release the elastic strain energy that has accumulated over centuries by the gradual movement of tectonic plates 1 , 2 . However, knowledge of plate deformation during a complete seismic cycle—two successive great earthquakes and the intervening interseismic period—remains incomplete 3 . A complete seismic cycle began in south-central Chile in 1835 with an earthquake of about magnitude 8.5 (refs 4 , 5 ) and ended in 2010 with a magnitude 8.8 earthquake 6 . During the first earthquake, an uplift of Isla Santa María by 2.4 to 3 m was documented 4 , 5 . In the second earthquake, the island was uplifted 7 by 1.8 m. Here we use nautical surveys made in 1804, after the earthquake in 1835 and in 1886, together with modern echo sounder surveys and GPS measurements made immediately before and after the 2010 earthquake, to quantify vertical deformation through the complete seismic cycle. We find that in the period between the two earthquakes, Isla Santa María subsided by about 1.4 m. We simulate the patterns of vertical deformation with a finite-element model and find that they agree broadly with predictions from elastic rebound theory 2 . However, comparison with geomorphic and geologic records of millennial coastline emergence 8 , 9 reveal that 10–20% of the vertical uplift could be permanent.

Isla Santa María↗

USGS2015

Updating the USGS seismic hazard maps for Alaska

The U.S. Geological Survey makes probabilistic seismic hazard maps and engineering design maps for building codes, emergency planning, risk management, and many other applications. The methodology considers all known earthquake sources with their associated magnitude and rate distributions. Specific faults can be modeled if slip-rate or recurrence information is available. Otherwise, areal sources are developed from earthquake catalogs or GPS data. Sources are combined with ground-motion estimates to compute the hazard. The current maps for Alaska were developed in 2007, and included modeled sources for the Alaska-Aleutian megathrust, a few crustal faults, and areal seismicity sources. The megathrust was modeled as a segmented dipping plane with segmentation largely derived from the slip patches of past earthquakes. Some megathrust deformation is aseismic, so recurrence was estimated from seismic history rather than plate rates. Crustal faults included the Fairweather-Queen Charlotte system, the Denali–Totschunda system, the Castle Mountain fault, two faults on Kodiak Island, and the Transition fault, with recurrence estimated from geologic data. Areal seismicity sources were developed for Benioff-zone earthquakes and for crustal earthquakes not associated with modeled faults. We review the current state of knowledge in Alaska from a seismic-hazard perspective, in anticipation of future updates of the maps. Updated source models will consider revised seismicity catalogs, new information on crustal faults, new GPS data, and new thinking on megathrust recurrence, segmentation, and geometry. Revised ground-motion models will provide up-to-date shaking estimates for crustal earthquakes and subduction earthquakes in Alaska.

Quaternary Science Reviews↗

USGS2015

Coastal evidence for Holocene subduction-zone earthquakes and tsunamis in central Chile

The &sim;500-year historical record of seismicity along the central Chile coast (30–34°S) is characterized by a series of &sim;M 8.0–8.5 earthquakes followed by low tsunamis (<4 m) occurring on the megathrust about every 80 years. One exception is the AD 1730 great earthquake (M 9.0–9.5) and high tsunami (>10 m), but the frequency of such large events is unknown. We extend the seismic history of central Chile through a study of a lowland stratigraphic sequence along the metropolitan coast north of Valparaíso (33°S). At this site, higher relative sea level during the mid Holocene created a tidal marsh and the accommodation space necessary for sediment that preserves earthquake and tsunami evidence. Within this 2600-yr-long sequence, we traced six laterally continuous sand beds probably deposited by high tsunamis. Plant remains that underlie the sand beds were radiocarbon dated to 6200, 5600, 5000, 4400, 3800, and 3700 cal yr BP. Sediment properties and diatom assemblages of the sand beds—for example, anomalous marine planktonic diatoms and upward fining of silt-sized diatom valves—point to a marine sediment source and high-energy deposition. Grain-size analysis shows a strong similarity between inferred tsunami deposits and modern coastal sediment. Upward fining sequences characteristic of suspension deposition are present in five of the six sand beds. Despite the lack of significant lithologic changes between the sedimentary units under- and overlying tsunami deposits, we infer that the increase in freshwater siliceous microfossils in overlying units records coseismic uplift concurrent with the deposition of five of the sand beds. During our mid-Holocene window of evidence preservation, the mean recurrence interval of earthquakes and tsunamis is &sim;500 years. Our findings imply that the frequency of historical earthquakes in central Chile is not representative of the greatest earthquakes and tsunamis that the central Chilean subduction zone has produced.

Quaternary Science Reviews↗

USGS2014

Five centuries of tsunamis and land-level changes in the overlapping rupture area of the 1960 and 2010 Chilean earthquakes

A combination of geological and historical records from south-central Chile provides a means to address general questions about the stability of megathrust rupture patches and the range of variation expected among earthquakes and tsunamis along a particular stretch of a subduction zone. The Tirúa River estuary (38.3°S) records four large tsunamis and coseismic land-level changes over the past 450 years within the overlapping rupture zones of the great subduction-zone earthquakes of A.D. 1960 (M w 9.5) and 2010 (M w 8.8). Sand layers 2 km up the Tirúa River represent the 2010 and 1960 tsunamis and two historical tsunamis, most likely in A.D. 1751 and 1575. Differing land-level changes during these earthquakes likely denote differences in the spatial distribution of slip on the megathrust in both the strike and dip directions within the overlapping rupture zone, with the uplift at Tirúa in 1751 and 2010 probably caused by slip extending farther landward and to greater depth than in 1575 and 1960, which showed subsidence or little change.

Geology↗

USGS2013

Toward a time-dependent probabilistic seismic hazard analysis for Alaska

We report on a time-dependent seismic hazard analysis for Alaska and the Aleutians to complement our recently completed time-independent map. Whereas the time-independent map treats all sources as statistically independent, the time-dependent analysis is based on calculations of the conditional probability of occurrence for the next 50 years by using a Brownian Passage Time model for the seismic sources judged to be characteristic. We then consider how those probabilities are modified by coseismic and postseismic stress changes resulting from large regional earthquakes occurring from 1938 to 2002. Recombining the time-dependent probabilities with time-independent truncated Gutenberg–Richter and smoothed seismicity sources leads to our time-dependent probabilistic seismic hazard results. We find that when accounting for time dependence without stress changes, earthquake probabilities can be significantly altered, reducing probabilities to near zero or increasing them to several times the time-independent values. In addition, accounting for coseismic stress changes tends to have a local influence on earthquake probabilities, whereas postseismic effects can be far-reaching in both time and space. In sum, however, since we combine time-dependent and time-independent sources, the modification to seismic hazard is relatively minor, increasing or decreasing hazard adjacent to characteristic faults by about 10%. Most cities, located far from characteristic faults, are little affected.

Alaska↗

USGS2011

Seismic-Hazard Maps for the Conterminous United States, 2008

Probabilistic seismic-hazard maps were prepared for the conterminous United States portraying peak horizontal acceleration and horizontal spectral response acceleration for 0.2- and 1.0-second periods with probabilities of exceedance of 10 percent in 50 years and 2 percent in 50 years. All of the maps were prepared by combining the hazard derived from spatially smoothed historic seismicity with the hazard from fault-specific sources. The acceleration values contoured are the random horizontal component. The reference site condition is firm rock, defined as having an average shear-wave velocity of 760 m/s in the top 30 meters corresponding to the boundary between NEHRP (National Earthquake Hazards Reduction program) site classes B and C. This data set represents the results of calculations of hazard curves for a grid of points with a spacing of 0.05 degrees in latitude and longitude. The grid of points were contoured to produce the final representation of the seismic-hazard. These maps are intended to summarize the available quantitative information about seismic ground motion hazard for the conterminous United States from geologic and geophysical source.

Scientific Investigations Map↗

USGS2009

Direct calculation of the probability distribution for earthquake losses to a portfolio

We demonstrate a direct method for the calculation of the annual frequency of exceedance for earthquake losses (or the probability distribution for annual losses) to a portfolio. This method parallels the classic method of probabilistic seismic hazard analysis for the calculation of the annual frequency of exceedance for earthquake ground motions. The method assumes conditional independence of the random component of ground motions and losses at different sites for each earthquake, given magnitude, distance to the sites, and so-called interevent epsilon. Examples show that the method is realizable, and can take into account different loss functions and site conditions in the portfolio. The main advantage of this method is that it does not require a separate set of scenario earthquakes, as do Monte Carlo-based approaches, but can be calculated directly from the inputs used for hazard maps.

Earthquake Spectra↗

USGS2008

Documentation for the 2008 update of the United States National Seismic Hazard Maps

The 2008 U.S. Geological Survey (USGS) National Seismic Hazard Maps display earthquake ground motions for various probability levels across the United States and are applied in seismic provisions of building codes, insurance rate structures, risk assessments, and other public policy. This update of the maps incorporates new findings on earthquake ground shaking, faults, seismicity, and geodesy. The resulting maps are derived from seismic hazard curves calculated on a grid of sites across the United States that describe the frequency of exceeding a set of ground motions. The USGS National Seismic Hazard Mapping Project developed these maps by incorporating information on potential earthquakes and associated ground shaking obtained from interaction in science and engineering workshops involving hundreds of participants, review by several science organizations and State surveys, and advice from two expert panels. The new probabilistic hazard maps represent an update of the 2002 seismic hazard maps developed by Frankel and others (2002), which used the methodology developed for the 1996 version of the maps (Frankel and others, 1996). Algermissen and Perkins (1976) published the first probabilistic seismic hazard map of the United States which was updated in Algermissen and others (1990). The National Seismic Hazard Maps represent our assessment of the “best available science” in earthquake hazards estimation for the United States (maps of Alaska and Hawaii as well as further information on hazard across the United States are available on our Web site at http://earthquake.usgs.gov/research/hazmaps/ ).

Open-File Report↗

USGS2007

Revision of Time-Independent Probabilistic Seismic Hazard Maps for Alaska

We present here time-independent probabilistic seismic hazard maps of Alaska and the Aleutians for peak ground acceleration (PGA) and 0.1, 0.2, 0.3, 0.5, 1.0 and 2.0 second spectral acceleration at probability levels of 2 percent in 50 years (annual probability of 0.000404), 5 percent in 50 years (annual probability of 0.001026) and 10 percent in 50 years (annual probability of 0.0021). These maps represent a revision of existing maps based on newly obtained data and assumptions reflecting best current judgments about methodology and approach. These maps have been prepared following the procedures and assumptions made in the preparation of the 2002 National Seismic Hazard Maps for the lower 48 States. A significant improvement relative to the 2002 methodology is the ability to include variable slip rate along a fault where appropriate. These maps incorporate new data, the responses to comments received at workshops held in Fairbanks and Anchorage, Alaska, in May, 2005, and comments received after draft maps were posted on the National Seismic Hazard Mapping Web Site. These maps will be proposed for adoption in future revisions to the International Building Code. In this documentation we describe the maps and in particular explain and justify changes that have been made relative to the 1999 maps. We are also preparing a series of experimental maps of time-dependent hazard that will be described in future documents.

Open-File Report↗

USGS2005

Seismic-hazard maps for the conterminous United States

This publication consists of six map sheets (titles and text included in this document, below), geospatial datasets, and metadata. The geospatial datasets consist of ArcInfo export files for the seismic-hazard point and polygon data shown on the sheets. Probabilistic seismic-hazard maps were prepared for the conterminous United States portraying peak horizontal acceleration and horizontal spectral response acceleration for 0.2- and 1.0-second periods with probabilities of exceedance of 10 percent in 50 years and 2 percent in 50 years. All of the maps were prepared by combining the hazard derived from spatially smoothed historic seismicity with the hazard from fault-specific sources. The acceleration values contoured are the random horizontal component. The reference site condition is firm rock, defined as having an average shear-wave velocity of 760 m/sec in the top 30 meters corresponding to the boundary between NEHRP (National Earthquake Hazards Reduction program) site classes B and C. This data set represents the results of calculations of hazard curves for a grid of points with a spacing of 0.05 degrees in latitude and longitude. The points were contoured to produce the final representation of the seismic hazard.

Scientific Investigations Map↗