Precision and detection limits of certain minor and trace elements in silicates by electron microprobe analysis
No abstract available.
Analytical Chemistry↗
Geology topics
Robert H. Heidel
Publications and source records attributed to Robert H. Heidel.
Energy dispersive spectrometry for quantitative mineralogical analyses: An ancillary system on an electron microphobe
Investigation of the Li-drifted Si-semiconductor X-ray detector for quantitative elemental analysis of some common rock-forming minerals shows that amounts of certain major elements having K spectra in the energy range of about 1.74 (Si) to 8.64 (Zn) kiloelectronvolts may be accurately determined, if spectral interferences are absent. Elements in major concentrations between 0.5 and 1.00 percent may be analyzed quantitatively without corrections of K spectra X-ray intensities when reference standards of similar composition are used and significant K spectra interferences between two adjacent elements are absent. Elemental concentrations less than about 0.5 weight percent cannot be precisely determined from raw X-ray intensity data owing to high and variable spectral background. Data show that spectral background corrections are feasible because spectral background is a linear function for the light-element oxides and silicates. Simultaneous quantitative elemental analysis, with both the energy dispersive spectrometer and the conventional wavelength dispersive spectrometers on the electron microprobe, is feasible.
Journal of Research of the U.S. Geological Survey↗
Primary distribution of silver and copper in native gold from six deposits in the Western United States
Electron-microprobe analyses and mineragraphic studies of native gold demonstrate considerable variations in the primary intergrain and intragrain distribution of silver. The gold grains have from 1–55 weight percent silver; copper is present in grains from only one locality and ranges from 0.1–0.6 weight percent. Some gold grains have strong zoning of silver whereas others have no detectable zoning. Gold grains from some deposits show remarkable intergrain homogeneity of silver and/or copper content, but others exhibit extreme heterogeneity. We believe that the inhomogeneities and variations in silver content recognized and emphasized here are features of primary deposition. We also recognize low-silver rims with sharp boundaries bordering many of the grains examined but believe these are developed in a relatively oxidizing, low-temperature environment and are not primary lode features. Opaque mineral inclusions of primary origin in gold grains are common in some deposits, scarce in many, and virtually absent from others. These inclusions may be of value in characterizing some gold deposits. For the majority of gold crystals from Copper Basin, Arizona, the lowest silver content observed was in the central portion of each grain and the highest silver content was in the rim. This is believed to be due an increase in the proportion of silver to gold in solution during growth of the crystals. Analysis of sized fractions of 331 gold grains from Pennsylvania Mountain, Colorado, shows no systematic correlation of grain size with silver content. Electron microprobe step-scanning of gold from Alder Gulch, Montana, suggests more than one mineralization event took place. Pyrite and acanthite inclusions less than 0.05 mm in the largest dimension, are present in some grains from this deposit. Inclusions of pyrite, pyrrhotite, chalcopyrite, and an isotropic Co-As-S mineral are present in the low-silver, copper-bearing gold from Ninemile Creek, Montana. The presence of copper and the low silver content in this gold is not typical of the gold-quartz-pyrite association which is common in the Western United States.
Arizona, Colorado, Montana, South Dakota, Washingt↗