Search USGS⌕ Search

Geology topics

Richard K. Blankennagel

Publications and source records attributed to Richard K. Blankennagel.

4 recordsLinked to original sources
USGS1981

Completion and testing of Madison Limestone test well 3, NW1/4SE1/4 sec. 35, T.2N., R.27E., Yellowstone County, Montana

Selected intervals in the lower and upper parts of the Mission Canyon Limestone of Mississippian age, and the Amsden Formation and Tensleep Sandstone of Pennsylvanian age, containing water with dissolved-solids concentrations of 3,000 milligrams per liter or less, were perforated through 7-inch casing that was cemented to the wells of the borehole. Total flow from all perforated intervals after development of each interval by swabbing and flowing was 125 gallons per minute. Total flow increased to 2,900 gallons per minute after acidizing and fracturing each unit through perforations. Radioactive tracer surveys indicate about 65 percent of the flow was from perforations in the upper part of the Mission Canyon Limestone. Based on analysis of data from a step-drawdown test, the values of transmissivity and coefficient of storage considered as most reasonable are 38,000 gallons per day per foot and 0.00002 respectively. Maximum temperature of water, measured at land surface, was 56.6 degrees Celsius. (USGS)

Open-File Report↗
USGS1979

Preliminary data for Madison Limestone test well 3, NW 1/4 Sec. 35. T. 2 N., R. 27 E., Yellowstone County, Montana

This report provides preliminary data for Madison Limestone test well 3 in Yellowstone County, Mont., including test-well history , geology of the test well, hydrologic testing, and geochemistry. It also discusses the preliminary results and future testing. The test well was drilled as part of the study to determine the water-resource potential of the Madison Limestone and associated rocks to meet future water needs in a 188,000-square-mile region that includes the coal-rich area of the Northern Great Plains. Drilling and testing were designed to yield a maximum of stratigraphic, structural, geophysical, and hydrologic information. (Woodard-USGS)

Open-File Report↗
USGS1977

Report on preliminary data for Madison Limestone test well no.1, NE1/4 SE1/4 section 15, T. 57 N., R. 65 W., Crook County, Wyoming

This report provides the preliminary data for the Madison Limestone test well no. 1 in Crook County, Wyoming, including test-well history, geology of the test well, hydrologic testing, and geochemistry. The test well was drilled to a depth of 4,341 feet to determine the water-resource potential of the Madison Limestone and associated rocks to meet future water needs in a 188,000 sq mi region that includes the coal-rich area of the Northern Great Plains. Drilling and testing were designed to yield a maximum of stratigraphic, structural, geophysical, and hydrologic information. All significant water-bearing units contain relatively freshwater (less than 2,000 mg/liter dissolved solids). Three water-bearing units, which are now cased off, may be potential sources of ground water in the area of the test well. These are the Hulett Sandstone Member of the Sundance Formation, the Minnekahta Limestone, and the upper sandy part of the Minnelusa Formation. (Woodard-USGS)

Open-File Report↗