Geology topics

Ricardo N. Szupiany

Publications and source records attributed to Ricardo N. Szupiany.

3 recordsLinked to original sources

USGS2020

Dunes in the world's big rivers are characterized by low-angle lee-side slopes and a complex shape

Dunes form critical agents of bedload transport in all of the world’s big rivers, and constitute appreciable sources of bed roughness and flow resistance. Dunes also generate stratification that is the most common depositional feature of ancient riverine sediments. However, current models of dune dynamics and stratification are conditioned by bedform geometries observed in small rivers and laboratory experiments. For these dunes, the downstream lee-side is often assumed to be simple in shape and sloping at the angle of repose. Here we show, using a unique compilation of high-resolution bathymetry from a range of large rivers, that dunes are instead characterized predominantly by low-angle lee-side slopes (<10°), complex lee-side shapes with the steepest portion near the base of the lee-side slope and a height that is often only 10% of the local flow depth. This radically different shape of river dunes demands that such geometries are incorporated into predictions of flow resistance, water levels and flood risk and calls for rethinking of dune scaling relationships when reconstructing palaeoflow depths and a fundamental reappraisal of the character, and origin, of low-angle cross-stratification within interpretations of ancient alluvial sediments.

Nature Geoscience↗

USGS2019

Estimating sand concentrations using ADCP‐based acoustic inversion in a large fluvial system characterized by bi‐modal suspended‐sediment distributions

Quantifying sediment flux within rivers is a challenge for many disciplines due, mainly, to difficulties inherent to traditional sediment sampling methods. These methods are operationally complex, high cost, and high risk. Additionally, the resulting data provide a low spatial and temporal resolution estimate of the total sediment flux, which has impeded advances in the understanding of the hydro‐geomorphic characteristics of rivers. Acoustic technologies have been recognized as a leading tool for increasing the resolution of sediment data by relating their echo intensity level measurements to suspended sediment. Further effort is required to robustly test and develop these techniques across a wide range of conditions found in natural river systems. This article aims to evaluate the application of acoustic inversion techniques using commercially available, down‐looking acoustic Doppler current profilers (ADCPs) in quantifying suspended sediment in a large sand bed river with varying bi‐modal particle size distributions, wash load and suspended‐sand ratios, and water stages. To achieve this objective, suspended sediment was physically sampled along the Paraná River, Argentina, under various hydro‐sedimentological regimes. Two ADCPs emitting different sound frequencies were used to simultaneously profile echo intensity level within the water column. Using the sonar equation, calibrations were determined between suspended‐sand concentrations and acoustic backscatter to solve the inverse problem. The study also analyzed the roles played by each term of the sonar equation, such as ADCP frequency, power supply, instrument constants, and particle size distributions typically found in sand bed rivers, on sediment attenuation and backscatter. Calibrations were successfully developed between corrected backscatter and suspended‐sand concentrations for all sites and ADCP frequencies, resulting in mean suspended‐sand concentration estimates within about 40% of the mean sampled concentrations. Noise values, calculated using the sonar equation and sediment sample characteristics, were fairly constant across evaluations, suggesting that they could be applied to other sand bed rivers.

Earth Surface Processes and Landforms↗

USGS2019

Measuring suspended sediment in sand-bedded rivers using down-looking acoustic doppler current profilers

The use of side-looking acoustic Doppler velocity meters (ADVMs) to estimate fluvial suspended-sediment concentrations (SSC) has become more operational by the U.S. Geological Survey in recent years; however, direct transfer of these techniques to down-looking acoustic Doppler current profilers (ADCPs) currently is not widely feasible. Key assumptions in the sidelooking ADVM method related to sediment homogeneity within the acoustic measurement volume are almost never met in wide, sand-bedded rivers because SSC and particle size commonly vary with depth and location in the river cross section. The use of ADCPs to estimate SSC has been investigated by researchers, but the requirements and limitations of an operational method that could be successfully applied at many locations are not well defined. If an operational method could be developed, the use of ADCPs, which are routinely used for flow measurements, would revolutionize sediment science by providing rapid measurements of sediment flux and spatial distribution. We collected detailed datasets in six sand-bedded rivers in the U.S. in 2016-2018, to evaluate the efficacy of using down-looking ADCPs of multiple frequencies to estimate SSC. The datasets included replicate sets of point and depth-integrated suspended-sediment samples and stationary and cross-sectional backscatter profiles using multiple ADCPs with differing frequencies. Reasonable calibrations were developed at all sites measured when calibrating to the coarse fraction (R2 0.66 to 0.98 with slopes close to 0.1 using 1200kHz ADCPs). Calibrations to the fines fraction were problematic because acoustic backscatter response was dominated by coarse particles when present, and substantial attenuation was contributed by coarse particles at some sites. A sensitivity analysis on minimum datasets showed that good calibrations could be developed using two verticals of data collected over a range of backscatter and sediment conditions, with a minimum of three points sampled for sediment within each vertical. Overall, results to date show great promise in using ADCPs to rapidly estimate and visualize SSC with high spatial resolution, and a new beta software tool called Sediment Transect Acoustics simplifies data processing. Improvements are underway to the beta software used in processing to allow incorporation of more acoustic and sediment characteristics and to estimate SSC in areas of the river cross section unmeasured by the ADCP.

Conference Paper↗