Search USGS⌕ Search

Geology topics

Ray Wells

Publications and source records attributed to Ray Wells.

11 recordsLinked to original sources
USGS2024

Deep structure of Siletzia in the Puget Lowland: Imaging an obducted plateau and accretionary thrust belt with potential fields

Detailed understanding of crustal components and tectonic history of forearcs is important due to their geological complexity and high seismic hazard. The principal component of the Cascadia forearc is Siletzia, a composite basaltic terrane of oceanic origin. Much is known about the lithology and age of the province. However, glacial sediments blanketing the Puget Lowland obscure its lateral extent and internal structure, hindering our ability to fully understand its tectonic history and its influence on modern deformation. In this study, we apply map-view interpretation and two-dimensional modeling of aeromagnetic and gravity data to the magnetically stratified Siletzia terrane revealing its internal structure and characterizing its eastern boundary. These analyses suggest the contact between Siletzia (Crescent Formation) and the Eocene accretionary prism trends northward under Lake Washington. North of Seattle, this boundary dips east where it crosses the Kingston arch, whereas south of Seattle the contact dips west where it crosses the Seattle uplift (SU). This westward dip is opposite the dip of the Eocene subduction interface, implying obduction of Siletzia upper crust at this southern location. Elongate pairs of high and low magnetic anomalies over the SU suggest imbrication of steeply-dipping, deeply rooted slices of Crescent Formation within Siletzia. We hypothesize these features result from duplication of Crescent Formation in an accretionary fold-thrust belt during the Eocene. The active Seattle fault divides this Eocene fold-thrust belt into two zones with different structural trends and opposite frontal ramp dips, suggesting the Seattle fault may have originated as a tear fault during accretion.

Washington↗
USGS2024

The magmatic origin of the Columbia River Gorge, USA

Along subduction zones, high-relief topography is associated with sustained volcanism parallel to the plate margin. However, the relationship between magmatism and mountain building in arcs is poorly understood. Here, we study patterns of surface deformation and correlated fluvial knickpoints in the Columbia River Gorge to link long-term magmatism to the uplift and ensuing topographic development of the Cascade Range. An upwarped paleochannel exposed in the walls of the Gorge constrains unsteady deep magma flux, the ratio of intrusive to extrusive magmatic contributions to topography, and the impact of magmatism on Columbia River incision since 3.5 million years ago. Geophysical data indicate that deep magma influx beneath the arc axis is ongoing and not aligned with the current locations of volcanic edifices, representing a broad regional influence on arc construction.

Oregon, Washington↗
USGS2021

Arc versus river: The geology of the Columbia River Gorge

The Columbia River Gorge is the Columbia River’s long-held yet evolving passage through the volcanic arc of the Cascade Range. The globally unique setting of a continental-scale river bisecting an active volcanic arc at the leading edge of a major plate boundary creates a remarkable setting where dynamic volcanic and tectonic processes interact with diverse and energetic fluvial processes. This three-day field trip explores several elements of the gorge and its remarkable geologic history—cast here as a contest between regional tectonic and volcanic processes building and displacing landscapes, and the relentless power of the Columbia River striving to maintain a smooth passage to the sea.

Oregon, Washington↗
USGS2021

The case for a long-lived and robust Yellowstone hotspot

The Yellowstone hotspot is recognized as a whole-mantle plume with a history that extends to at least 56 Ma, as recorded by offshore volcanism on the Siletzia oceanic plateau. Siletzia accreted onto the North American plate at 51–49 Ma, followed by repositioning of the Farallon trench west of Siletzia from 48 to 45 Ma. North America overrode the hotspot, and it transitioned from the Farallon plate to the North American plate from 42 to 34 Ma. Since that time, it has been genetically associated with a series of aligned volcanic provinces associated with age-progressive events that include Oligocene high-K calc-alkaline volcanism in the Oregon backarc region with coeval adakite volcanism localized above the hot plume center; mid-Miocene bimodal and flood-basalt volcanism of the main-phase Columbia River Basalt Group; coeval collapse of the Nevadaplano associated with onset of Basin and Range extension and minor magmatism; and late Miocene to recent bimodal volcanism along two coeval but antithetical rhyolite migration trends—the Yellowstone–Snake River Plain hotspot track to the ENE and the Oregon High Lava Plains to the WNW.

Yellowstone hotspot↗
USGS2021

Toward an integrative geological and geophysical view of Cascadia subduction zone earthquakes

The Cascadia subduction zone (CSZ) is an exceptional geologic environment for recording evidence of land level changes, tsunamis, and ground motion that reveals at least 19 great megathrust earthquakes over the past 10 kyr. Such earthquakes are among the most impactful natural hazards on Earth, transcend national boundaries, and can have global impact. Reducing the societal impacts of future events in the U.S. Pacific Northwest and coastal British Columbia, Canada requires improved scientific understanding of megathrust earthquake rupture, recurrence, and corresponding hazards. Despite substantial knowledge gained from decades of research, large uncertainties remain about the characteristics and frequencies of past CSZ earthquakes. In this review, we summarize geological, geophysical, and instrumental evidence relevant to understanding megathrust earthquakes along the CSZ and associated uncertainties. We discuss how the evidence constrains various models of great megathrust earthquake recurrence in Cascadia and identify potential paths forward for the earthquake science community.

British Columbia, Oregon, Washington↗
USGS2020

Northward migration of the Oregon forearc on the Gales Creek fault

The Gales Creek fault (GCF) is a 60-km-long, northwest-striking dextral fault system (west of Portland, Oregon) that accommodates northward motion and uplift of the Oregon Coast Range. New geologic mapping and geophysical models confirm inferred offsets from earlier geophysical surveys and document ∼12 km of right-lateral offset of a basement high in Eocene Siletz River Volcanics since ca. 35 Ma and ∼8.8 km of right-lateral separation of Miocene Columbia River Basalt at Newberg, Oregon, since 15 Ma (∼0.62 ± 0.12 mm/yr, average long-term rate). Relative uplift of Eocene Coast Range basalt basement west of the fault zone is at least 5 km based on depth to basement under the Tualatin Basin from a recent inversion of gravity data. West of the city of Forest Grove, the fault consists of two subparallel strands ∼7 km apart. The westernmost, Parsons Creek strand, forms a linear valley southward to Henry Hagg Lake, where it continues southward to Newberg as a series of en echelon strands forming both extensional and compressive step-overs. Compressive step-overs in the GCF occur at intersections with ESE-striking sinistral faults crossing the Coast Range, suggesting the GCF is the eastern boundary of an R′ Riedel shear domain that could accommodate up to half of the ∼45° of post–40 Ma clockwise rotation of the Coast Range documented by paleomagnetic studies. Gravity and magnetic anomalies suggest the western strands of the GCF extend southward beneath Newberg into the Northern Willamette Valley, where colinear magnetic anomalies have been correlated with the Mount Angel fault, the proposed source of the 1993 M 5.7 Scotts Mills earthquake. The potential-field data and water-well data also indicate the eastern, Gales Creek strand of the fault may link to the NNW-striking Canby fault through the E-W Beaverton fault to form a 30-km-wide compressive step-over along the south side of the Tualatin Basin. LiDAR data reveal right-lateral stream offsets of as much as 1.5 km, shutter ridges, and other youthful geomorphic features for 60 km along the geophysical and geologic trace of the GCF north of Newberg, Oregon. Paleoseismic trenches document Eocene bedrock thrust over 250 ka surficial deposits along a reverse splay of the fault system near Yamhill, Oregon, and Holocene motion has been recently documented on the GCF along Scoggins Creek and Parsons Creek. The GCF could produce earthquakes in excess of Mw 7, if the entire 60 km segment ruptured in one earthquake. The apparent subsurface links of the GCF to other faults in the Northern Willamette Valley suggest that other faults in the system may also be active.

Oregon↗
USGS2014

Geologic history of Siletzia, a large igneous province in the Oregon and Washington Coast Range: Correlation to the geomagnetic polarity time scale and implications for a long-lived Yellowstone hotspot

Siletzia is a basaltic Paleocene and Eocene large igneous province in coastal Oregon, Washington, and southern Vancouver Island that was accreted to North America in the early Eocene. New U-Pb magmatic, detrital zircon, and 40 Ar/ 39 Ar ages constrained by detailed field mapping, global nannoplankton zones, and magnetic polarities allow correlation of the volcanics with the 2012 geologic time scale. The data show that Siletzia was rapidly erupted 56–49 Ma, during the Chron 25–22 plate reorganization in the northeast Pacific basin. Accretion was completed between 51 and 49 Ma in Oregon, based on CP11 (CP—Coccolith Paleogene zone) coccoliths in strata overlying onlapping continental sediments. Magmatism continued in the northern Oregon Coast Range until ca. 46 Ma with the emplacement of a regional sill complex during or shortly after accretion. Isotopic signatures similar to early Columbia River basalts, the great crustal thickness of Siletzia in Oregon, rapid eruption, and timing of accretion are consistent with offshore formation as an oceanic plateau. Approximately 8 m.y. after accretion, margin parallel extension of the forearc, emplacement of regional dike swarms, and renewed magmatism of the Tillamook episode peaked at 41.6 Ma (CP zone 14a; Chron 19r). We examine the origin of Siletzia and consider the possible role of a long-lived Yellowstone hotspot using the reconstruction in GPlates, an open source plate model. In most hotspot reference frames, the Yellowstone hotspot (YHS) is on or near an inferred northeast-striking Kula-Farallon and/or Resurrection-Farallon ridge between 60 and 50 Ma. In this configuration, the YHS could have provided a 56–49 Ma source on the Farallon plate for Siletzia, which accreted to North America by 50 Ma. A sister plateau, the Eocene basalt basement of the Yakutat terrane, now in Alaska, formed contemporaneously on the adjacent Kula (or Resurrection) plate and accreted to coastal British Columbia at about the same time. Following accretion of Siletzia, the leading edge of North America overrode the YHS ca. 42 Ma. The voluminous high-Ti basaltic to alkalic magmatism of the 42–35 Ma Tillamook episode and extension in the forearc may be related to the encounter with an active YHS. Clockwise rotation of western Oregon about a pole in the backarc has since moved the Tillamook center and underlying Siletzia northward ∼250 km from the probable hotspot track on North America. In the reference frames we examined, the YHS arrives in the backarc ∼5 m.y. too early to match the 17 Ma magmatic flare-up commonly attributed to the YHS. We suggest that interaction with the subducting slab may have delayed arrival of the plume beneath the backarc.

Oregon, Vancouver, Washington↗
USGS2013

Alaska earthquake source for the SAFRR tsunami scenario: Chapter B in The SAFRR (Science Application for Risk Reduction) Tsunami Scenario

Tsunami modeling has shown that tsunami sources located along the Alaska Peninsula segment of the Aleutian-Alaska subduction zone have the greatest impacts on southern California shorelines by raising the highest tsunami waves for a given source seismic moment. The most probable sector for a M w ~ 9 source within this subduction segment is between Kodiak Island and the Shumagin Islands in what we call the Semidi subduction sector; these bounds represent the southwestern limit of the 1964 M w 9.2 Alaska earthquake rupture and the northeastern edge of the Shumagin sector that recent Global Positioning System (GPS) observations indicate is currently creeping. Geological and geophysical features in the Semidi sector that are thought to be relevant to the potential for large magnitude, long-rupture-runout interplate thrust earthquakes are remarkably similar to those in northeastern Japan, where the destructive M w 9.1 tsunamigenic earthquake of 11 March 2011 occurred. In this report we propose and justify the selection of a tsunami source seaward of the Alaska Peninsula for use in the Tsunami Scenario that is part of the U.S. Geological Survey (USGS) Science Application for Risk Reduction (SAFRR) Project. This tsunami source should have the potential to raise damaging tsunami waves on the California coast, especially at the ports of Los Angeles and Long Beach. Accordingly, we have summarized and abstracted slip distribution from the source literature on the 2011 event, the best characterized for any subduction earthquake, and applied this synoptic slip distribution to the similar megathrust geometry of the Semidi sector. The resulting slip model has an average slip of 18.6 m and a moment magnitude of M w = 9.1. The 2011 Tohoku earthquake was not anticipated, despite Japan having the best seismic and geodetic networks in the world and the best historical record in the world over the past 1,500 years. What was lacking was adequate paleogeologic data on prehistoric earthquakes and tsunamis, a data gap that also presently applies to the Alaska Peninsula and the Aleutian Islands. Quantitative appraisal of potential tsunami sources in Alaska requires such investigations.

Alaska↗
USGS2006

Oregon geology — Parent of the soil, foundation for the vine

This presentation describes USGS geologic mapping in western Oregon, geologic map products, a thumbnail sketch of geologic history, a discussion of new mapping in progress in northwest Oregon, a tour of northwest Oregon geologic units, their relation to new American Viticultural Areas, and online sources of information.

Oregon, Washington↗