Search USGS⌕ Search

Geology topics

Ray E. Wells

Publications and source records attributed to Ray E. Wells.

69 records · Page 4Linked to original sources
USGS1991

Neogene rotations and quasicontinuous deformation of the Pacific Northwest continental margin

Paleomagnetically determined rotations about vertical axes of 15 to 12 Ma flows of the Miocene Columbia River Basalt Group of Oregon and Washington decrease smoothly with distance from the plate margin, consistent with a simple physical model for continental deformation that assumes the lithosphere behaves as a thin layer of fluid. The average rate of northward translation of the continental margin since 15 Ma calculated from the rotations, using this model, is about 15 mm/yr, which suggests that much of the tangential motion between the Juan de Fuca and North American plates since middle Miocene time has been taken up by deformation of North America. The fluid-like character of the large-scale deformation implies that the brittle upper crust follows the motions of the deeper parts of the lithosphere.

Geology↗
USGS1991

Off-fault ground ruptures in the Santa Cruz Mountains, California: Ridge-top spreading versus tectonic extension during the 1989 Loma Prieta earthquake

The M s 7.1 Loma Prieta earthquake of 18 October 1989 produced abundant ground ruptures in an 8 by 4 km area along Summit Road and Skyland Ridge in the Santa Cruz Mountains. Predominantly extensional fissures formed a left-stepping, crudely en echelon pattern along ridges of the hanging-wall block southwest of the San Andreas fault, about 12 km northwest of the epicenter. The fissures are subparallel to the San Andreas fault and appear to be controlled by bedding planes, faults, joints, and other weak zones in the underlying Tertiary sedimentary strata of the hanging-wall block. The pattern of extensional fissures is generally consistent with tectonic extension across the crest of the uplifted hanging-wall block. Also, many displacements in Laurel Creek canyon and along the San Andreas and Sargent faults are consistent with right-lateral reverse faulting inferred for the mainshock. Additional small tensile failures along the axis of the Laurel anticline may reflect growth of the fold during deep-seated compression. However, the larger ridge-top fissures commonly have displacements that are parallel to the north-northeast regional slope directions and appear inconsistent with east-northeast extension expected from this earthquake. Measured cumulative displacements across the ridge crests are at least 35 times larger than that predicted by the geodetically determined surface deformation. These fissures also occur in association with ubiquitous landslide complexes that were reactivated by the earthquake to produce the largest concentration of co-seismic slope failures in the epicentral region. The anomalously large displacements and the apparent slope control of the geometry and displacement of many co-seismic surface ruptures lead us to conclude that gravity is an important driving force in the formation of the ridge-top fissures. Shaking-induced gravitational spreading of ridges and downslope movement may account for 90¿ or more of the observed displacements on the linear fissures. Similar fissures occurred in the same area and elsewhere near the San Andreas fault during the predominantly right-lateral 1906 San Francisco earthquake and suggest that the Loma Prieta ground ruptures may, in large part, be independent of fault kinematics.

California↗
USGS1989

Correlation of Miocene flows of the Columbia River Basalt Group from the central Columbia River Plateau to the coast of Oregon and Washington

Nearly twenty flows of the Columbia River Basalt Group (CRBG) can be paleomagnetically and chemically correlated westward as far as 500 km from the Columbia Plateau in Washington, through the Columbia Gorge, to the Coast Range of Oregon and Washington. In the Coast Range near Cathlamet, Washington, the CRBG flow stratigraphy includes 10 flows of Grande Ronde Basalt (1 low-MgO R 2 flow, 6 low-MgO N 2 flows, 3 high-MgO N 2 flows), 2 flows of Wanapum Basalt (both flows of Sand Hollow from the Frenchman Springs Member), and the Pomona Member of the Saddle Mountains Basalt. Elsewhere in the Coast Range, additional Grande Ronde Basalt flows, including flows of Winterwater or Umtanum, and additional Wanapum flows, including the flows of Ginkgo, have been reported. Thus at least 18 to 20 CRBG flows reached the coast region. Several of these distal flows have distinctive chemical and magnetic characteristics that are shared by nearby isolated intrusions in Coast Range sedimentary rocks, thus strongly supporting recent suggestions that these intrusions are invasive bodies fed by CRBG flows. Magnetization directions from several flows indicate 16 to 30° of clockwise rotation of the coast with respect to the plateau since middle Miocene time.

Oregon, Washington↗
USGS1989

Mechanisms of Cenozoic tectonic rotation, Pacific Northwest Convergent Margin, U.S.A.

Large clockwise rotations (15–80°) are characteristic of Cenozoic volcanic and sedimentary rocks along the convergent margin of the northwestern United States. Abundant paleomagnetic data from 62–12 m.y. old rocks in forearc, arc, and backarc regions show that rotation increases with age and with proximity to the coast. Paleomagnetic and structural studies both support dextral shear as a significant contributor to tectonic rotation in the Pacific Northwest, with an added contribution from Basin-Range extension. Paleomagnetism of individual Miocene (15-12 Ma) flows of the Columbia River Basalt Group show a well-defined, progressive increase in rotation across the forearc region toward the trench which is most readily explained by shear. This progressive increase in rotation toward the coast is also seen in Oligocene and Eocene rocks, although with steeper gradients, indicating that shear rotation has been important throughout Cenozoic time. The dextral shear may be accommodated by abundant, small-scale strike-slip faults which are acting as Riedel shears. Coast Range faults, usually with well-developed subhorizontal slickensides, occur throughout the stratigraphie section and are most abundant in the oldest rocks. Displacements are small to moderate (10 2 –10 3 m), and both dextral and sinistral faults are common. Fault trends are variable, with N20°–45°W faults showing dextral slip and N60°W-S70°W faults showing sinistral slip. The driving force for dextral shear presumably results from coupling of the overlying plate with the subducting Farallon plate, which has been moving northeast throughout most of Cenozoic time. The increase in rotation from north to south along the coast probably represents the contribution of extension in the Basin- Range region to the rotations in Oregon.

Book chapter↗
USGS1989

Paleomagnetism and tectonic rotation of the lower Miocene Peach Springs Tuff: Colorado Plateau, Arizona, to Barstow, California

We have determined remanent magnetization directions of the lower Miocene Peach Springs Tuff at 41 localities in western Arizona and southeastern California. An unusual northeast and shallow magnetization direction confirms the proposed geologic correlation of isolated outcrops of the tuff from the Colorado Plateau to Barstow, California, a distance of 350 km. The Peach Springs Tuff was apparently emplaced as a single cooling unit about 18 or 19 Ma and is now exposed in 4 tectonic provinces west of the Plateau, including the Transition Zone, Basin and Range, Colorado River extensional corridor, and central Mojave Desert strike-slip zone. As such, the tuff is an ideal stratigraphic and structural marker for paleomagnetic assessment of regional variations in tectonic rotations about vertical axes. From 4 sites on the stable Colorado Plateau, we have determined a reference direction of remanent magnetization (I = 36.4°, D = 33.0°, α 95 = 3.4°) that we interpret as a representation of the ambient magnetic field at the time of eruption. A steeper direction of magnetization (I = 54.8°, D = 22.5°, α 95 = 2.3°) was observed at Kingman where the tuff is more than 100 m thick, and similar directions were determined at 7 other thick exposures of the Peach Springs Tuff. The steeper component is presumably a later-stage magnetization acquired after prolonged cooling of the ignimbrite. When compared to the Plateau reference direction, tilt-corrected directions from 3 of 6 sites in the central Mojave strike-slip zone show localized rotations up to 13° in the vicinity of strike-slip faults. The other three sites show no significant rotations with respect to the Colorado Plateau. Both clockwise and counterclockwise rotations were measured, and no systematic regional pattern is evident. Our results do not support kinematic models which require consistent rotation of large regions to accommodate the cumulative displacement of major post-middle Miocene strike-slip faults in the central Mojave Desert. Most of our sites in the Transition Zone and Basin and Range province have had no significant rotation, although small counterclockwise rotation in the McCullough and New York Mountains may be related to sinistral shear along en echelon faults southwest of the Lake Mead shear zone. The larger rotations occur in the Colorado River extensional corridor, where 8 of 14 sites show rotations ranging from 37° clockwise to 51° counterclockwise. These rotations occur in allochthonous tilt blocks which have been transported northeastward above the Chemehuevi-Whipple Mountains detachment fault. Upper-plate blocks within 1 km of the exposed detachment unexpectedly show no significant rotation. From this relation, we infer that rotations are accommodated along numerous low-angle faults at higher structural levels above the detachment surface.

Arizona, California↗
USGS1988

The relative contribution of accretion, shear, and extension to Cenozoic tectonic rotation in the Pacific Northwest

Large Cenozoic clockwise rotations defined by paleomagnetic data are an established fact in the Pacific Northwest, and many tectonic models have been proposed to explain them, including (1) rotation of accreted oceanic microplates during docking, (2) dextral shear between North America and northward-moving oceanic plates to the west, and (3) microplate rotation in front of an expanding Basin and Range province. Stratigraphic onlap relations and local structure indicate that microplate rotation during docking was not a major contributor to the observed rotations. Coast Range structures, Basin and Range extension, and paleomagnetic data from middle Miocene (15 Ma) Coast Range rocks indicate that dextral shear is responsible for at least 40% of the post-15 Ma rotation of the Coast Range and that Basin and Range extension is responsible for the remainder. Reconstructions based on extrapolation of this ratio back to 37 and 50 Ma are consistent with reconstructions based on paleomagnetic and stratigraphic relations in older rocks and suggest that dextral shear has, been a significant contributor to rotation during most of Tertiary time. Changes in the dextral-shear rotation rate over the past 50 m.y. correlate directly with changes in the velocity of the Farallon plate parallel to the coast and provide a strong argument for oblique subduction as the driving mechanism. Continental reconstructions incorporating shear may provide constraints on the rate of extension in the northernmost Basin and Range region and suggest 17% extension since 15 Ma, 39% since 37 Ma, and 72% since 50 Ma near latitude 42°N.

GSA Bulletin↗
USGS1984

Paleomagnetic constraints on the interpretation of early Cenozoic Pacific Northwest paleogeography

Widespread Cenozoic clockwise tectonic rotation in the Pacific Northwest is an established fact; however, the geologic reconstructions based on these rotations are the subject of continuing debate. Three basic mechanisms have been proposed to explain the rotations: (1) simple shear rotation of marginal terranes caught in the dextral shear couple between oceanic plates and North America; (2) rotation during oblique microplate collision and accretion to the continental margin; and (3) rotation of continental margin areas during episodes of intracontinental extension. In areas where detailed structure and stratigraphy are available, distributed shear rotations are amplv demonstrated paleomagnetically. However, rotation due to asymmetric interarc extension must be significant, especially for the Oregon Coast Range, in light of recent estimates of large Tertiary extension across the northern Basin and Range. The relative importance of shear versus extension is difficult to determine, but shear could account for nearly onehalf of the observed rotations. Oblique microplate collision has not contributed significantly to the observed Cenozoic rotations because most of the rotation post-dates collision-related deformation in the Oregon and Washington. Coast Range. The resultant continental reconstructions suggest that about 300 km of extension has occurred at 42°N. latitude (southern Oregon border) since early Eocene time. This reconstruction suggests that Cretaceous sedimentary basins east of the Klamath Mountains have undergone significant Tertiary extension (about f<0%) , but little rotation. Upper Cretaceous sedimentary rocks in the Blue Mountains of Oregon near Mitchell are probably rotated at least 15° and perhaps as much as 60°, which allows considerable latitude in the restoration of that part of the basin.

Pacific Section S.E.P.M.↗
USGS1980

Drake Peak — A structurally complex rhyolite center in southeastern Oregon

The Drake Peak volcanic center of middle Miocene age, located about 25 km northeast of Lakeview, Oreg., is a structurally complex eruptive center that resulted from several episodes of intrusion and extrusion of rhyolite. Two thousand meters of andesite and basalt flows, lahars, and volcaniclastic rocks of late Eocene age, and of basaltic andesite, tuff, and flood basalts of Eocene to middle Miocene age were structurally domed by the piston-like intrusion of a large body of rhyolite. The eruption of rhyolite flows at 14.3±2 million years followed the structural doming, and upper Miocene tuffs and basalt flows lapped against the dome and the rhyolite. A felsitic rhyolite ring intrusion 3 km in diameter, emplaced during the doming, is now exposed in the deeply eroded core of the dome. The rhyolites range in Si02 content from 69 to 76 percent and are peraluminous. The nonporphyritic ring intrusion is more silicic than the flows erupted later, which contain up to 23 percent phenocrysts of plagioclase, hypersthene, biotite, clinopyroxene, and quartz. The progressive depletion of Mg, Ca, Sr, Fe, Ti, and Al and the enrichment in silicon and rubidium are compatible with the generation of the observed rhyolite types by tapping a compositionally zoned magma chamber.

Oregon↗