Geology topics

R.W. Sternberg

Publications and source records attributed to R.W. Sternberg.

4 recordsLinked to original sources

USGS2006

Bottom instrumented tripods: History, applications, and impacts

Instrumented bottom tripods have provided important data on sediment transport processes on continental shelves and in estuaries for four decades. Since the initial deployment in a tidal channel in Puget Sound, WA, in 1965 numerous tripods have been constructed to investigate bottom boundary layer and sediment dynamics worldwide. Tripod data have led to new understanding of near-bottom wave and current flows in the coastal ocean, and have been crucial to the development of shelf circulation and sediment transport models. Calculations of bottom stress, bottom roughness, and sediment flux that resulted directly from tripod data have been compared to bottom boundary layer model results. Where these have differed, new or revised model components have been developed to improve the skill of the models. The many discoveries that have been made from tripod experiments include dense, near-bottom fluid mud layers that transport large quantities of suspended sediment offshore into deeper regions of the continental shelf. This process has been linked to the seaward progradation of subaqueous deltas and to the boundaries of mid-shelf mud deposits off rivers with high fine-sediment discharge.

Continental Shelf Research↗

USGS1994

Sediment-transport events on the northern California continental shelf during the 1990-1991 STRESS experiment

Measurements of currents and light transmission were made at bottom tripods and moorings arrayed across the northern California continental shelf along the Coastal Ocean Dynamics Experiment (CODE) "C" transect as part of the 1990-1991 Sediment Transport Events on Shelves and Slopes (STRESS) experiment. In combination with meteorological and wave data from the National Data Buoy Center Buoy 46013, these measurements provide information about the physical forcing and resultant resuspension and transport of bottom material between 21 November and 8 March. Sixteen events were identified in the wave, wind and current-meter records for this period. Only two were local storms with southerly winds, but they caused about half of the seasonal net transport. Seven were swell events that combined long-period waves generated by distant storms with local currents. At the 90-m site, swells interacted with the mean northward flow to produce northward transport. During six northerly wind events, upwelling-favorable winds often were sufficient to slow or reverse the mean northward flow and thus caused southward transport. A single current event, which produced moderate southward transport, was observed at the 130-m site. Net transport during the winter experiment was offshore at all sites, northward at the inner- and mid-shelf sites, but southward at the outer-shelf site. The results suggest that local storms with southerly winds may dominate seasonal transport, as on the Washington shelf, but significant transport also can occur during fair weather and during periods of northerly winds. ?? 1994.

Continental Shelf Research↗

USGS1988

Suspended sediment transport under estuarine tidal channel conditions

A modified version of the GEOPROBE tripod has been used to monitor flow conditions and suspended sediment distribution in the bottom boundary layer of a tidal channel within San Francisco Bay, California. Measurements were made every 15 minutes over three successive tidal cycles. They included mean velocity profiles from four electromagnetic current meters within 1 m of the seabed; mean suspended sediment concentration profiles from seven miniature nephelometers operated within 1 m of the seabed; near-bottom pressure fluctuations; vertical temperature gradient; and bottom photographs. Additionally, suspended sediment was sampled from four levels within 1 m of the seabed three times during each successive flood and ebb cycle. While the instrument was deployed, STD-nephelometer measurements were made throughout the water column, water samples were collected each 1–2 hours, and bottom sediment was sampled at the deployment site. From these measurements, estimates were made of particle settling velocity ( w s ) from size distributions of the suspended sediment, friction velocity (U * U ∗ "> ) from the velocity profiles, and reference concentration ( C a ) was measured at z = 20 cm. These parameters were used in the suspended sediment distribution equations to evaluate their ability to predict the observed suspended sediment profiles. Three suspended sediment particle conditions were evaluated: (1) individual particle size in the 4–11 φ (62.5-0.5 μm) range with the reference concentration C a at z = 20 cm ( C φ ), (2) individual particle size in the 4–6 φ size range, flocs representing the 7–11 φ size range with the reference concentration C a at z = 20 cm ( C f ), and (3) individual particle size in the 4–6 φ size range, flocs representing the 7–11 φ size range with the reference concentration predicted as a function of the bed sediment size distribution and the square of the excess shear stress. In addition, computations of particle flux were made in order to show vertical variations in horizontal mass flux for varying flow conditions.

California↗

USGS1986

An instrument system for monitoring and sampling suspended sediment in the benthic boundary layer

An instrument system has been constructed that can monitor and sample suspended sediment distributions in the benthic boundary layer. It consists of miniature nephelometers and suspended sediment samplers placed within one meter of the seabed. The system is capable of continuously monitoring suspended sediment profiles at eight levels between 14 and 100 cm above the seabed and collecting suspended sediment samples at four levels (20, 50, 70 and 100 cm) at three times during a deployment period. The suspended sediment system is designed to fit onto the instrumented tripod GEOPROBE which contains four electromagnetic current meters, pressure sensor, bottom stereo camera, two temperature sensors, transmissometer, and a Savonius rotor current meter. Sensor operation, data recording, and sediment sampling events are synchronized. Thus detailed measurements of the near-bottom flow conditions are made concurrently with suspended sediment measurements. The combined system has been used in sediment transporting environments within San Francisco Bay, California, and Puget Sound, Washington.

Marine Geology↗