Search USGS⌕ Search

Geology topics

R.M. Iverson

Publications and source records attributed to R.M. Iverson.

16 recordsLinked to original sources
USGS2009

Elements of an improved model of debris-flow motion

A new depth-averaged model of debris-flow motion describes simultaneous evolution of flow velocity and depth, solid and fluid volume fractions, and pore-fluid pressure. Non-hydrostatic pore-fluid pressure is produced by dilatancy, a state-dependent property that links the depth-averaged shear rate and volumetric strain rate of the granular phase. Pore-pressure changes caused by shearing allow the model to exhibit rate-dependent flow resistance, despite the fact that the basal shear traction involves only rate-independent Coulomb friction. An analytical solution of simplified model equations shows that the onset of downslope motion can be accelerated or retarded by pore-pressure change, contingent on whether dilatancy is positive or negative. A different analytical solution shows that such effects will likely be muted if downslope motion continues long enough, because dilatancy then evolves toward zero, and volume fractions and pore pressure concurrently evolve toward steady states. ?? 2009 American Institute of Physics.

Conference Paper↗
USGS2008

Digital data for volcano hazards of the Three Sisters region, Oregon

Three Sisters is one of three active volcanic centers that lie close to rapidly growing communities and resort areas in Central Oregon. The major composite volcanoes of this area are clustered near the center of the region and include South Sister, Middle Sister, and Broken Top. Additionally, hundreds of mafic volcanoes are scattered throughout the Three Sisters area. These range from small cinder cones to large shield volcanoes like North Sister and Belknap Crater. Hazardous events include landslides from the steep flanks of large volcanoes and floods, which need not be triggered by eruptions, as well as eruption-triggered events such as fallout of tephra (volcanic ash) and lava flows. A proximal hazard zone roughly 20 kilometers (12 miles) in diameter surrounding the Three Sisters and Broken Top could be affected within minutes of the onset of an eruption or large landslide. Distal hazard zones that follow river valleys downstream from the Three Sisters and Broken Top could be inundated by lahars (rapid flows of water-laden rock and mud) generated either by melting of snow and ice during eruptions or by large landslides. Slow-moving lava flows could issue from new mafic volcanoes almost anywhere within the region. Fallout of tephra from eruption clouds can affect areas hundreds of kilometers (miles) downwind, so eruptions at volcanoes elsewhere in the Cascade Range also contribute to volcano hazards in Central Oregon. Scientists at the Cascades Volcano Observatory created a geographic information system (GIS) data set which depicts proximal and distal lahar hazard zones as well as a regional lava flow hazard zone for Three Sisters (USGS Open-File Report 99-437, Scott and others, 1999). The various distal lahar zones were constructed from LaharZ software using 20, 100, and 500 million cubic meter input flow volumes. Additionally, scientists used the depositional history of past events in the Three Sisters Region as well as experience and judgment derived from the study of volcanoes to help construct the regional hazard zone.

Open-File Report↗
USGS2003

The debris-flow rheology myth

Models that employ a fixed rheology cannot yield accurate interpretations or predictions of debris-flow motion, because the evolving behavior of debris flows is too complex to be represented by any rheological equation that uniquely relates stress and strain rate. Field observations and experimental data indicate that debris behavior can vary from nearly rigid to highly fluid as a consequence of temporal and spatial variations in pore-fluid pressure and mixture agitation. Moreover, behavior can vary if debris composition changes as a result of grain-size segregation and gain or loss of solid and fluid constituents in transit. An alternative to fixed-rheology models is provided by a Coulomb mixture theory model, which can represent variable interactions of solid and fluid constituents in heterogeneous debris-flow surges with high-friction, coarse-grained heads and low-friction, liquefied tails. ?? 2003 Millpress.

Conference Paper↗
USGS2003

Surge dynamics coupled to pore-pressure evolution in debris flows

Temporally and spatially varying pore-fluid pressures exert strong controls on debris-flow motion by mediating internal and basal friction at grain contacts. We analyze these effects by deriving a one-dimensional model of pore-pressure diffusion explicitly coupled to changes in debris-flow thickness. The new pore-pressure equation is combined with Iverson's (1997) extension of the depth-averaged Savage-Hutter (1989, 1991) granular avalanche equations to predict motion of unsteady debris-flow surges with evolving pore-pressure distributions. Computational results illustrate the profound effects of pore-pressure diffusivities on debris-flow surge depths and velocities. ?? 2003 Millpress,.

Conference Paper↗
USGS2001

Flow of variably fluidized granular masses across three-dimensional terrain I. Coulomb mixture theory

Rock avalanches, debris flows, and related phenomena consist of grain-fluid mixtures that move across three-dimensional terrain. In all these phenomena the same basic forces, govern motion, but differing mixture compositions, initial conditions, and boundary conditions yield varied dynamics and deposits. To predict motion of diverse grain-fluid masses from initiation to deposition, we develop a depth-averaged, threedimensional mathematical model that accounts explicitly for solid- and fluid-phase forces and interactions. Model input consists of initial conditions, path topography, basal and internal friction angles of solid grains, viscosity of pore fluid, mixture density, and a mixture diffusivity that controls pore pressure dissipation. Because these properties are constrained by independent measurements, the model requires little or no calibration and yields readily testable predictions. In the limit of vanishing Coulomb friction due to persistent high fluid pressure the model equations describe motion of viscous floods, and in the limit of vanishing fluid stress they describe one-phase granular avalanches. Analysis of intermediate phenomena such as debris flows and pyroclastic flows requires use of the full mixture equations, which can simulate interaction of high-friction surge fronts with more-fluid debris that follows. Special numerical methods (described in the companion paper) are necessary to solve the full equations, but exact analytical solutions of simplified equations provide critical insight. An analytical solution for translational motion of a Coulomb mixture accelerating from rest and descending a uniform slope demonstrates that steady flow can occur only asymptotically. A solution for the asymptotic limit of steady flow in a rectangular channel explains why shear may be concentrated in narrow marginal bands that border a plug of translating debris. Solutions for static equilibrium of source areas describe conditions of incipient slope instability, and other static solutions show that nonuniform distributions of pore fluid pressure produce bluntly tapered vertical profiles at the margins of deposits. Simplified equations and solutions may apply in additional situations identified by a scaling analysis. Assessment of dimensionless scaling parameters also reveals that miniature laboratory experiments poorly simulate the dynamics of full-scale flows in which fluid effects are significant. Therefore large geophysical flows can exhibit dynamics not evident at laboratory scales.

Journal of Geophysical Research B: Solid Earth↗
USGS2001

Volcano hazards in the Three Sisters region, Oregon

Three Sisters is one of three potentially active volcanic centers that lie close to rapidly growing communities and resort areas in Central Oregon. Two types of volcanoes exist in the Three Sisters region and each poses distinct hazards to people and property. South Sister, Middle Sister, and Broken Top, major composite volcanoes clustered near the center of the region, have erupted repeatedly over tens of thousands of years and may erupt explosively in the future. In contrast, mafic volcanoes, which range from small cinder cones to large shield volcanoes like North Sister and Belknap Crater, are typically short-lived (weeks to centuries) and erupt less explosively than do composite volcanoes. Hundreds of mafic volcanoes scattered through the Three Sisters region are part of a much longer zone along the High Cascades of Oregon in which birth of new mafic volcanoes is possible. This report describes the types of hazardous events that can occur in the Three Sisters region and the accompanying volcano-hazard-zonation map outlines areas that could be at risk from such events. Hazardous events include landslides from the steep flanks of large volcanoes and floods, which need not be triggered by eruptions, as well as eruption-triggered events such as fallout of tephra (volcanic ash) and lava flows. A proximal hazard zone roughly 20 kilometers (12 miles) in diameter surrounding the Three Sisters and Broken Top could be affected within minutes of the onset of an eruption or large landslide. Distal hazard zones that follow river valleys downstream from the Three Sisters and Broken Top could be inundated by lahars (rapid flows of water-laden rock and mud) generated either by melting of snow and ice during eruptions or by large landslides. Slow-moving lava flows could issue from new mafic volcanoes almost anywhere within the region. Fallout of tephra from eruption clouds can affect areas hundreds of kilometers (miles) downwind, so eruptions at volcanoes elsewhere in the Cascade Range also contribute to volcano hazards in Central Oregon. This report is intended to aid scientists, government officials, and citizens as they work together to reduce the risk from volcano hazards through public education and emergency-response planning.

Oregon↗
USGS1997

The physics of debris flows

Recent advances in theory and experimentation motivate a thorough reassessment of the physics of debris flows. Analyses of flows of dry, granular solids and solid-fluid mixtures provide a foundation for a comprehensive debris flow theory, and experiments provide data that reveal the strengths and limitations of theoretical models. Both debris flow materials and dry granular materials can sustain shear stresses while remaining static; both can deform in a slow, tranquil mode characterized by enduring, frictional grain contacts; and both can flow in a more rapid, agitated mode characterized by brief, inelastic grain collisions. In debris flows, however, pore fluid that is highly viscous and nearly incompressible, composed of water with suspended silt and clay, can strongly mediate intergranular friction and collisions. Grain friction, grain collisions, and viscous fluid flow may transfer significant momentum simultaneously. Both the vibrational kinetic energy of solid grains (measured by a quantity termed the granular temperature) and the pressure of the intervening pore fluid facilitate motion of grains past one another, thereby enhancing debris flow mobility. Granular temperature arises from conversion of flow translational energy to grain vibrational energy, a process that depends on shear rates, grain properties, boundary conditions, and the ambient fluid viscosity and pressure. Pore fluid pressures that exceed static equilibrium pressures result from local or global debris contraction. Like larger, natural debris flows, experimental debris flows of ???10 m3 of poorly sorted, water-saturated sediment invariably move as an unsteady surge or series of surges. Measurements at the base of experimental flows show that coarse-grained surge fronts have little or no pore fluid pressure. In contrast, finer-grained, thoroughly saturated debris behind surge fronts is nearly liquefied by high pore pressure, which persists owing to the great compressibility and moderate permeability of the debris. Realistic models of debris flows therefore require equations that simulate inertial motion of surges in which high-resistance fronts dominated by solid forces impede the motion of low-resistance tails more strongly influenced by fluid forces. Furthermore, because debris flows characteristically originate as nearly rigid sediment masses, transform at least partly to liquefied flows, and then transform again to nearly rigid deposits, acceptable models must simulate an evolution of material behavior without invoking preternatural changes in material properties. A simple model that satisfies most of these criteria uses depth-averaged equations of motion patterned after those of the Savage-Hutter theory for gravity-driven flow of dry granular masses but generalized to include the effects of viscous pore fluid with varying pressure. These equations can describe a spectrum of debris flow behaviors intermediate between those of wet rock avalanches and sediment-laden water floods. With appropriate pore pressure distributions the equations yield numerical solutions that successfully predict unsteady, nonuniform motion of experimental debris flows.

Reviews of Geophysics↗
USGS1997

Geotechnical properties of debris-flow sediments and slurries

Measurements of geotechnical properties of various poorly sorted debris-flow sediments and slurries (??? 32 mm diameter) emphasize their granular nature, and reveal that properties of slurries can differ significantly from those of compacted sediments. Measurements show that: (1) cohesion probably offers little resistance to shear in most debris flows under low confining stresses normally found in nature; (2) intrinsic hydraulic permeabilities of compacted debris-flow sediments vary from about 10-14-10-9 m2; permeabilities of 'typical' debris-flow slurries fall toward the low end of the range; (3) debris-flow slurries are characterized by very large values of 'elastic' compressibility (C approx. 10-2 kPa-1); and (4) hydraulic diffusivities of quasistatically consolidating slurries are approx. 10-4-10-7 m2/s. Low hydraulic diffusivity of debris slurries permits excess fluid pressure and low effective strength to persist during sediment transport and deposition.

Conference Paper↗
USGS1995

Can magma-injection and groundwater forces cause massive landslides on Hawaiian volcanoes?

Landslides with volumes exceeding 1000 km 3 have occurred on the flanks of Hawaiian volcanoes. Because the flanks typically slope seaward no more than 12 °, the mechanics of slope failure are problematic. Limit-equilibrium analyses of wedge-shaped slices of the volcano flanks show that magma injection at prospective headscarps might trigger the landslides, but only under very restrictive conditions. If static magma weight is the sole source of magma pressure, hypothetical flank failures can have any size, but can occur only if slip-surface friction angles are less than about 16 °. If slip surfaces have friction angles more typical of fragmented or intact rocks (30–40 °), flank failures can occur only if mean magma pressures exceed static equilibrium pressures. Landslide length then scales with the excess magma pressure divided by the buoyant unit weight of the volcano flank. For typical excess magma pressures, buoyant unit weights and rock friction angles, the largest landslides that might be triggered in this manner have lengths of only several kilometers. This is at least an order of magnitude too small to explain the occurrence of giant Hawaiian landslides. The growing mass of active Hawaiian volcanoes can compress the edifice and substrate rocks and consequently produce groundwater head gradients that might destabilize larger sectors of the volcano flanks. However, calculations show that volcano growth at an estimated long-term vertical rate of 0.02 m/yr can generate significant head gradients only if an areally extensive, buried clay layer exists that has a great thickness (~ 200 m) or very low hydraulic diffusivity (~ 10 −11 m 2 /s). Additional calculations show that groundwater head gradients associated with topographically induced flow and sea-level change are less likely to be important. Thus a simple, quantitative explanation for failure of Hawaiian volcano flanks remains elusive, and more complex scenarios may merit investigation.

Journal of Volcanology and Geothermal Research↗
USGS1990

Limiting equilibrium and liquefaction potential in infinite submarine slopes

Stability evaluation of submarine slopes is hampered by the difficulty of making field measurements. Owing to the scarcity of detailed field data, stability is commonly assessed by assuming homogenous infinite slopes with steady seepage. For these conditions, it is necessary to measure only the slope angle, friction angle, cohesion, and pore pressure at some distance into the sediment to evaluate stability. Examination of available data shows that conditions close to those required for liquefaction are necessary for Coulomb failure in many continental shelf areas. This favors long landslide runouts and flow of sediment subsequent to failure. -from Authors

Marine Geotechnology↗
USGS1987

Rainfall, ground-water flow, and seasonal movement at Minor Creek landslide, northwestern California: Physical interpretation of empirical relations

Simple ground-water flow analyses can clarify complex empirical relations between rainfall and landslide motion. Here we present detailed data on rainfall, ground-water flow, and repetitive seasonal motion that occurred from 1982 to 1985 at Minor Creek landslide in northwestern California, and we interpret these data in the context of physically based theories. We find that landslide motion is closely regulated by the direction and magnitude of near-surface hydraulic gradients and by waves of pore pressure caused by intermittent rainfall. Diffusive propagation of pore-pressure waves accompanies downward ground-water flow along nearly vertical hydraulic gradients that exist in most of the landslide. Field data combined with a pore-pressure diffusion analysis show that single rainstorms typically produce short-period waves that attenuate before reaching the landslide base. In contrast, seasonal rainfall cycles produce long-period waves that modify basal pore pressures, but only after time lags that range from weeks to months. Such tune lags can depend on antecedent moisture storage and can explain variable delays between the onset of the wet season and seasonal landslide motion. Limit-equilibrium analysis shows that when seasonal pressure waves reach the landslide base, they establish a critical distribution of effective stress that delicately triggers landslide motion. The critical effective-stress balance is extremely sensitive to the direction and magnitude of hydraulic gradients. Although pervasively downward gradients instigate seasonal motion, we infer from theory and limited data that ground water also may circulate locally in near-surface cells. The circulation can further reduce the landslide's frictional strength, particularly in areas of nearly horizontal ground-water flow that occur beneath steep faces of hummocks. Hummocky topography that results from slope instability may therefore cause ground-water flow that perpetuates instability. Diffusive propagation of pore-pressure waves accompanies downward ground-water flow along nearly vertical hydraulic gradients that exist in most of the landslide. Field data combined with a pore-pressure diffusion analysis show that single rainstorms typically produce short-period waves that attenuate before reaching the landslide base. In contrast, seasonal rainfall cycles produce long-period waves that modify basal pore pressures, but only after time lags that range from weeks to months. Such tune lags can depend on antecedent moisture storage and can explain variable delays between the onset of the wet season and seasonal landslide motion. Limit-equilibrium analysis shows that when seasonal pressure waves reach the landslide base, they establish a critical distribution of effective stress that delicately triggers landslide motion. The critical effective-stress balance is extremely sensitive to the direction and magnitude of hydraulic gradients. Although pervasively downward gradients instigate seasonal motion, we infer from theory and limited data that ground water also may circulate locally in near-surface cells. The circulation can further reduce the landslide's frictional strength, particularly in areas of nearly horizontal ground-water flow that occur beneath steep faces of hummocks. Hummocky topography that results from slope instability may therefore cause ground-water flow that perpetuates instability.

California↗