Geology topics

R.B. Seed

Publications and source records attributed to R.B. Seed.

6 recordsLinked to original sources

USGS2013

Shear-wave velocity-based probabilistic and deterministic assessment of seismic soil liquefaction potential

Shear-wave velocity (V s ) offers a means to determine the seismic resistance of soil to liquefaction by a fundamental soil property. This paper presents the results of an 11-year international project to gather new V s site data and develop probabilistic correlations for seismic soil liquefaction occurrence. Toward that objective, shear-wave velocity test sites were identified, and measurements made for 301 new liquefaction field case histories in China, Japan, Taiwan, Greece, and the United States over a decade. The majority of these new case histories reoccupy those previously investigated by penetration testing. These new data are combined with previously published case histories to build a global catalog of 422 case histories of V s liquefaction performance. Bayesian regression and structural reliability methods facilitate a probabilistic treatment of the V s catalog for performance-based engineering applications. Where possible, uncertainties of the variables comprising both the seismic demand and the soil capacity were estimated and included in the analysis, resulting in greatly reduced overall model uncertainty relative to previous studies. The presented data set and probabilistic analysis also help resolve the ancillary issues of adjustment for soil fines content and magnitude scaling factors.

Journal of Geotechnical and Geoenvironmental Engin↗

USGS2008

New Orleans and Hurricane Katrina. IV: Orleans East Bank (Metro) protected basin

This paper addresses damage caused by Hurricane Katrina to the main Orleans East Bank protected basin. This basin represented the heart of New Orleans, and contained the main downtown area, the historic French Quarter, the Garden District, and the sprawling Lakefront and Canal Districts. Nearly half of the loss of life during this hurricane, and a similar fraction of the overall damages, occurred in this heavily populated basin. There are a number of important geotechnical lessons, as well as geo-forensic lessons, associated with the flooding of this basin. These include the difficulties associated with the creation and operation of regional-scale flood protection systems requiring federal and local cooperation and funding over prolonged periods of time. There are also a number of engineering and policy lessons regarding (1) the accuracy and reliability of current analytical methods; (2) the shortcomings and potential dangers involved in decisions that reduced short-term capital outlays in exchange for increased risk of potential system failures; (3) the difficulties associated with integrating local issues with a flood risk reduction project; and (4) the need to design and maintain levees as systems; with each of the many individual project elements being required to mesh seamlessly. These lessons are of interest and importance for similar flood protection systems throughout numerous other regions of the United States and the world. ?? 2008 ACSE.

Journal of Geotechnical and Geoenvironmental Engin↗

USGS2005

Probabilistic liquefaction triggering based on the cone penetration test

Performance-based earthquake engineering requires a probabilistic treatment of potential failure modes in order to accurately quantify the overall stability of the system. This paper is a summary of the application portions of the probabilistic liquefaction triggering correlations proposed recently proposed by Moss and co-workers. To enable probabilistic treatment of liquefaction triggering, the variables comprising the seismic load and the liquefaction resistance were treated as inherently uncertain. Supporting data from an extensive Cone Penetration Test (CPT)-based liquefaction case history database were used to develop a probabilistic correlation. The methods used to measure the uncertainty of the load and resistance variables, how the interactions of these variables were treated using Bayesian updating, and how reliability analysis was applied to produce curves of equal probability of liquefaction are presented. The normalization for effective overburden stress, the magnitude correlated duration weighting factor, and the non-linear shear mass participation factor used are also discussed.

Conference Paper↗

USGS2004

Standard penetration test-based probabilistic and deterministic assessment of seismic soil liquefaction potential

This paper presents'new correlations for assessment of the likelihood of initiation (or triggering) of soil liquefaction. These new correlations eliminate several sources of bias intrinsic to previous, similar correlations, and provide greatly reduced overall uncertainty and variance. Key elements in the development of these new correlations are (1) accumulation of a significantly expanded database of field performance case histories; (2) use of improved knowledge and understanding of factors affecting interpretation of standard penetration test data; (3) incorporation of improved understanding of factors affecting site-specific earthquake ground motions (including directivity effects, site-specific response, etc.); (4) use of improved methods for assessment of in situ cyclic shear stress ratio; (5) screening of field data case histories on a quality/uncertainty basis; and (6) use of high-order probabilistic tools (Bayesian updating). The resulting relationships not only provide greatly reduced uncertainty, they also help to resolve a number of corollary issues that have long been difficult and controversial including: (1) magnitude-correlated duration weighting factors, (2) adjustments for fines content, and (3) corrections for overburden stress. ?? ASCE.

Journal of Geotechnical and Geoenvironmental Engin↗

USGS2004

Development of regional liquefaction-induced deformation hazard maps

This paper describes part of a project to assess the feasibility of producing regional (1:24,000-scale) liquefaction hazard maps that are based-on potential liquefaction-induced deformation. The study area is the central Santa Clara Valley, at the south end of San Francisco Bay in Central California. The information collected and used includes: a) detailed Quaternary geological mapping, b) over 650 geotechnical borings, c) probabilistic earthquake shaking information, and d) ground-water levels. Predictions of strain can be made using either empirical formulations or numerical simulations. In this project lateral spread displacements are estimated and new empirical relations to estimate future volumetric and shear strain are used. Geotechnical boring data to are used to: (a) develop isopach maps showing the thickness of sediment thatis likely to liquefy and deform under earthquake shaking; and (b) assess the variability in engineering properties within and between geologic map units. Preliminary results reveal that late Holocene deposits are likely to experience the greatest liquefaction-induced strains, while Holocene and late Pleistocene deposits are likely to experience significantly less horizontal and vertical strain in future earthquakes. Development of maps based on these analyses is feasible.

Conference Paper↗

USGS2000

New site coefficients and site classification system used in recent building seismic code provisions

Recent code provisions for buildings and other structures (1994 and 1997 NEHRP Provisions, 1997 UBC ) have adopted new site amplification factors and a new procedure for site classification. Two amplitude-dependent site amplification factors are specified: F a for short periods and F v for longer periods. Previous codes included only a long period factor S and did not provide for a short period amplification factor. The new site classification system is based on definitions of five site classes in terms of a representative average shear wave velocity to a depth of 30 m (V¯ s ). This definition permits sites to be classified unambiguously. When the shear wave velocity is not available, other soil properties such as standard penetration resistance or undrained shear strength can be used. The new site classes denoted by letters A - E, replace site classes in previous codes denoted by S1 - S4. Site classes A and B correspond to hard rock and rock, Site Class C corresponds to soft rock and very stiff / very dense soil, and Site Classes D and E correspond to stiff soil and soft soil. A sixth site class, F, is defined for soils requiring site-specific evaluations. Both F a and F v are functions of the site class, and also of the level of seismic hazard on rock, defined by parameters such as A a and A v ( 1994 NEHRP Provisions ), S s and S l ( 1997 NEHRP Provisions ) or Z ( 1997 UBC ). The values of F a and F v decrease as the seismic hazard on rock increases due to soil nonlinearity. The greatest impact of the new factors F a and F v as compared with the old S factors occurs in areas of low-to-medium seismic hazard. This paper summarizes the new site provisions, explains the basis for them, and discusses ongoing studies of site amplification in recent earthquakes that may influence future code developments.

Earthquake Spectra↗