Search USGSSearch

Geology topics

R. Schmidt

Publications and source records attributed to R. Schmidt.

4 recordsLinked to original sources

Subsurface microbial diversity in deep-granitic-fracture water in Colorado

A microbial community analysis using 16S rRNA gene sequencing was performed on borehole water and a granite rock core from Henderson Mine, a >1,000-meter-deep molybdenum mine near Empire, CO. Chemical analysis of borehole water at two separate depths (1,044 m and 1,004 m below the mine entrance) suggests that a sharp chemical gradient exists, likely from the mixing of two distinct subsurface fluids, one metal rich and one relatively dilute; this has created unique niches for microorganisms. The microbial community analyzed from filtered, oxic borehole water indicated an abundance of sequences from iron-oxidizing bacteria ( Gallionella spp.) and was compared to the community from the same borehole after 2 weeks of being plugged with an expandable packer. Statistical analyses with UniFrac revealed a significant shift in community structure following the addition of the packer. Phospholipid fatty acid (PLFA) analysis suggested that Nitrosomonadales dominated the oxic borehole, while PLFAs indicative of anaerobic bacteria were most abundant in the samples from the plugged borehole. Microbial sequences were represented primarily by Firmicutes , Proteobacteria , and a lineage of sequences which did not group with any identified bacterial division; phylogenetic analyses confirmed the presence of a novel candidate division. This “Henderson candidate division” dominated the clone libraries from the dilute anoxic fluids. Sequences obtained from the granitic rock core (1,740 m below the surface) were represented by the divisions Proteobacteria (primarily the family Ralstoniaceae ) and Firmicutes . Sequences grouping within Ralstoniaceae were also found in the clone libraries from metal-rich fluids yet were absent in more dilute fluids. Lineage-specific comparisons, combined with phylogenetic statistical analyses, show that geochemical variance has an important effect on microbial community structure in deep, subsurface systems.

Applied and Environmental Microbiology

Evaluating planetary digital terrain models-The HRSC DTM test

The High Resolution Stereo Camera (HRSC) has been orbiting the planet Mars since January 2004 onboard the European Space Agency (ESA) Mars Express mission and delivers imagery which is being used for topographic mapping of the planet. The HRSC team has conducted a systematic inter-comparison of different alternatives for the production of high resolution digital terrain models (DTMs) from the multi look HRSC push broom imagery. Based on carefully chosen test sites the test participants have produced DTMs which have been subsequently analysed in a quantitative and a qualitative manner. This paper reports on the results obtained in this test.

Planetary and Space Science

The HRSC DTM test

The High Resolution Stereo Camera (HRSC, [1]) is part of the orbiter payload on the Mars Express (MEX) mission of the European Space Agency (ESA), orbiting the Red Planet in a highly elliptical orbit since January 2004. For the first time in planetary exploration, a camera system has especially been designed to meet the requirements of photogrammetry and cartography for mapping the complete surface of a planet [2]. For this purpose HRSC operates as a push broom scanning instrument with 9 CCD line detectors mounted in parallel in the focal plane of the camera. Data acquisition is achieved by five panchromatic channels under different observation angles and four colour channels. At periapsis the ground resolution of the nadir channel amounts to 12.5 m, the stereo channels are typically operated at a 2x coarser resolution with the two photometry and the four colour channels at 4x or 8x coarser resolution. The data provided by HRSC are well suited for the automatic generation of Digital Terrain Models (DTMs) and other 3D data products. Such products are of vital interest to planetary sciences. As the Mars Express mission has recently been extended the prospects for a complete topographic mapping of Mars by HRSC at very high resolution are very good, indeed. Image matching is well researched and has been documented in the literature. In general, it is agreed that in simple terrain and with adequate image acquisition geometry very good results can be achieved by totally automated approaches. Things start to be much more complicated if more complex situations are faced, such as steep terrain, height discontinuities, occlusions, poor texture, shadows, atmospheric dust, clouds, increased image noise, compression artefacts etc., some of which are commonplace in HRSC images. Nevertheless, automatic DTM generation from HRSC images by means of image matching has reached a very high level over the years. The systematic processing chain at DLR for producing preliminary DTMs with 200 m resolution [3] runs well and stable. In addition, several groups are able to produce DTMs using different approaches, or have developed alternative modules for parts of the DTM generation process [2]. Also, a few groups have been developing shape-from-shading techniques which have reached pre-operational efficiency. It is against this background that the desire was expressed to compare the individual approaches for deriving DTMs from HRSC images in order to assess their advantages and disadvantages. Based on carefully chosen test sites the test participants have produced DTMs which have been subsequently analysed in a quantitative and a qualitative manner. This paper reports on the results obtained in this test, more details can be found in [4].

Conference Paper

The HRSC DTM test

The High Resolution Stereo Camera (HRSC) has been orbiting the planet Mars since January 2004 onboard the ESA Mars Express mission and delivers imagery which is being used for topographic mapping of the planet. The HRSC team is currently conducting a systematic inter-comparison of different alternatives for the production of high resolution Digital Terrain Models (DTMs) from the multilook HRSC push broom imagery. Based on carefully chosen test sites the test participants have produced DTMs which have been subsequently analysed in a quantitative and a qualitative manner. This paper reports on the results obtained in this test.

Conference Paper