Search USGS⌕ Search

Geology topics

R. C. Berg

Publications and source records attributed to R. C. Berg.

11 recordsLinked to original sources
USGS2017

Pleistocene stratigraphy of the Boston Harbor drumlins, Massachusetts

Evidence from the Boston Harbor drumlins indicates that two superposed tills were deposited during glacier advances which were separated by a long nonglacial interval. At Long and Peddocks Islands, argillans and truncated clay-filled fractures, along with discontinuities in clay-mineral composition, define the till contacts. Physical indicators separating the tills are not apparent at other exposures, where till boundaries were defined solely by discontinuities in clay-mineral composition. The weathering profile in the upper part of the lower till indicates extensive weathering under a climate similar to that of today, and probably similar to that of the Sangamon Interglaciation. The depth of the weathering profile, the sequence of clay-mineral alteration products, and the presence of pedogenic features in the upper part of the lower till are comparable to Sangamonian weathering profiles in the midwestern United States, implying that the lower till is Illinoian or older. ?? 1990.

Quaternary Research↗
USGS2010

Geological mapping goes 3-D in response to societal needs

The transition to 3-D mapping has been made possible by technological advances in digital cartography, GIS, data storage, analysis, and visualization. Despite various challenges, technological advancements facilitated a gradual transition from 2-D maps to 2.5-D draped maps to 3-D geological mapping, supported by digital spatial and relational databases that can be interrogated horizontally or vertically and viewed interactively. Challenges associated with data collection, human resources, and information management are daunting due to their resource and training requirements. The exchange of strategies at the workshops has highlighted the use of basin analysis to develop a process-based predictive knowledge framework that facilitates data integration. Three-dimensional geological information meets a public demand that fills in the blanks left by conventional 2-D mapping. Two-dimensional mapping will, however, remain the standard method for extensive areas of complex geology, particularly where deformed igneous and metamorphic rocks defy attempts at 3-D depiction.

GSA Today↗
USGS2006

Testing of stack-unit/aquifer sensitivity analysis using contaminant plume distribution in the subsurface of Savannah River Site, South Carolina, USA

Published information on the correlation and field-testing of the technique of stack-unit/aquifer sensitivity mapping with documented subsurface contaminant plumes is rare. The inherent characteristic of stack-unit mapping, which makes it a superior technique to other analyses that amalgamate data, is the ability to deconstruct the sensitivity analysis on a unit-by-unit basis. An aquifer sensitivity map, delineating the relative sensitivity of the Crouch Branch aquifer of the Administrative/Manufacturing Area (A/M) at the Savannah River Site (SRS) in South Carolina, USA, incorporates six hydrostratigraphic units, surface soil units, and relevant hydrologic data. When this sensitivity map is compared with the distribution of the contaminant tetrachloroethylene (PCE), PCE is present within the Crouch Branch aquifer within an area classified as highly sensitive, even though the PCE was primarily released on the ground surface within areas classified with low aquifer sensitivity. This phenomenon is explained through analysis of the aquifer sensitivity map, the groundwater potentiometric surface maps, and the plume distributions within the area on a unit-by- unit basis. The results of this correlation show how the paths of the PCE plume are influenced by both the geology and the groundwater flow. ?? Springer-Verlag 2006.

South Carolina↗
USGS2003

Three-dimensional geologic modeling and visualization of the Virttaankangas aquifer, southwestern Finland

A need exists for a reliable and long-term water supply for the 285,000 inhabitants of the Turku area in southwestern Finland . In response to this need, there are plans to replace the present water supply from the surface sources with artificially infiltrated groundwater from a Quaternary esker aquifer called the Virttaankangas aquifer . New sedimentological studies of the Virttaankangas area have revealed the complexities of the esker system and its surrounding glacial, glaciofluvial, and glaciolacustrine geology. This led to the characterization of the hydrogeological units of the aquifer , the result of which has been a three - dimensional (3-D) truly integrated solids model that represents the geometry, interrelationships, and hydrostratigraphy of the study area. The 3-D model was made with Earth Vision geologic modeling software. The 3-D geological model of the Virttaankangas aquifer can be used for planning the infiltration of river water into the aquifer and to understand the geologic and geographic boundaries of the hydrogeologic units hosting the groundwater reserve and the geologic relationships between the units. Another major outcome of this study is a powerful visualization tool that will be provided to municipal and government authorities who must understand the geologic complexities involved with water-resource planning prior to their decision making.

southwest Finland↗
USGS1999

Tools for groundwater protection planning: An example from McHenry County, Illinois, USA

This paper presents an approach for producing aquifer sensitivity maps from three-dimensional geologic maps, called stack-unit maps. Stack-unit maps depict the succession of geologic materials to a given depth, and aquifer sensitivity maps interpret the successions according to their ability to transmit potential contaminants. Using McHenry County, Illinois, as a case study, stack-unit maps and an aquifer sensitivity assessment were made to help land-use planners, public health officials, consultants, developers, and the public make informed decisions regarding land use. A map of aquifer sensitivity is important for planning because the county is one of the fastest growing counties in the nation, and highly vulnerable sand and gravel aquifers occur within 6 m of ground surface over 75% of its area. The aquifer sensitivity map can provide guidance to regulators seeking optimal protection of groundwater resources where these resources are particularly vulnerable. In addition, the map can be used to help officials direct waste-disposal and industrial facilities and other sensitive land-use practices to areas where the least damage is likely to occur, thereby reducing potential future liabilities.

Environmental Management↗
USGS1998

Development and testing of a contamination potential mapping system for a portion of the General Separations Area, Savannah River Site, South Carolina

A methodology was developed to evaluate and map the contamination potential or aquifer sensitivity of the upper groundwater flow system of a portion of the General Separations Area (GSA) at the Department of Energy's Savannah River Site (SRS) in South Carolina. A Geographic Information System (GIS) was used to integrate diverse subsurface geologic data, soils data, and hydrology utilizing a stack-unit mapping approach to construct mapping layers. This is the first time that such an approach has been used to delineate the hydrogeology of a coastal plain environment. Unit surface elevation maps were constructed for the tops of six Tertiary units derived from over 200 boring logs. Thickness or isopach maps were created for five hydrogeologic units by differencing top and basal surface elevations. The geologic stack-unit map was created by stacking the five isopach maps and adding codes for each stack-unit polygon. Stacked-units were rated according to their hydrogeologic properties and ranked using a logarithmic approach (utility theory) to establish a contamination potential index. Colors were assigned to help display relative importance of stacked-units in preventing or promoting transport of contaminants. The sensitivity assessment included the effects of surface soils on contaminants which are particularly important for evaluating potential effects from surface spills. Hydrogeologic/hydrologic factors did not exhibit sufficient spatial variation to warrant incorporation into contamination potential assessment. Development of this contamination potential mapping system provides a useful tool for site planners, environmental scientists, and regulatory agencies.A methodology was developed to evaluate and map the contamination potential or aquifer sensitivity of the upper groundwater flow system of a portion of the General Separations Area (GSA) at the Department of Energy's Savannah River Site (SRS) in South Carolina. A Geographic Information System (GIS) was used to integrate diverse subsurface geologic data, soils data, and hydrology utilizing a stack-unit mapping approach to construct mapping layers. This is the first time that such an approach has been used to delineate the hydrogeology of a coastal plain environment. Unit surface elevation maps were constructed for the tops of six Tertiary units derived from over 200 boring logs. Thickness or isopach maps were created for five hydrogeologic units by differencing top and basal surface elevations. The geologic stack-unit map was created by stacking the five isopach maps and adding codes for each stack-unit polygon. Stacked-units were rated according to their hydrogeologic properties and ranked using a logarithmic approach (utility theory) to establish a contamination potential index. Colors were assigned to help display relative importance of stacked-units in preventing or promoting transport of contaminants. The sensitivity assessment included the effects of surface soils on contaminants which are particularly important for evaluating potential effects from surface spills. Hydrogeologic/hydrologic factors did not exhibit sufficient spatial variation to warrant incorporation into contamination potential assessment. Development of this contamination potential mapping system provides a useful tool for site planners, environmental scientists, and regulatory agencies.

South Carolina↗
USGS1992

A model for the assessment of aquifer contamination potential based on regional geologic framework

The texture and three-dimensional framework of geologic materials should be considered in assessments of groundwater's vulnerability to contamination because geology controls the movement of contaminants and groundwater and influences groundwater quality. Contaminants are introduced into, transmitted through, and stored by geologic materials. We present a model that identifies aquifers and ranks sequences of geologic materials by their relative potential for transmitting water and contaminants from land surface. With this basis, the model can be used to assess the potential for contamination of aquifers by surface activities such as landfitling of wastes or application of agricultural chemicals. A regional map of aquifer contamination potential can be generated from the model; it retains the geologic map information intact and available for reinterpretation or other uses. The model was developed using broad, regional map information and is intended to be a general tool for assessing the regional vulnerability of aquifers to contamination. It is not intended for local, site-specific use, but for prioritizing local areas where contamination potential and/or land-use history warrant more detailed assessment or monitoring. Because it provides a regional view of contamination potential, regional patterns or trends of map units should be evaluated, rather than using the map information literally to assess local areas. Methods of applying this model and contamination potential map to groundwater protection and management are currently being studied; research includes an attempt to statistically validate the model with water-quality data, and to identify natural groupings of the ranked contamination potential map units. ?? 1992 Springer-Verlag New York Inc.

Environmental Geology and Water Sciences↗
USGS1992

Environmental benefits vs. costs of geologic mapping

Boone and Winnebago Counties, Illinois, U.S.A., were selected for this study, required by the Illinois State Senate, because mapping and environmental interpretations were completed there in 1981. Costs of geologic mapping in these counties in 1990 dollars were $290,000. Two estimates of costs of statewide mapping were made, one extrapolated from Boone and Winnebago Counties ($21 million), the other estimated on the basis of differences between the Boone/Winnebago program and proposed mapping program for the State of Illinois ($55 million). Benefits of geologic information come in the form of future avoided costs for environmental cleanup. Only the quantifiable data, available from a few sites, were included. Data collection, based on 55 personal interviews in Boone and Winnebago Counties, were grouped into four cumulative categories with increasing variability. Geologic maps alone cannot account for all avoided costs of future cleanup. Therefore, estimated benefits were reduced by 50, 75, and 90 percent in three scenarios. To account for delays in proper utilization of knowledge gained from a mapping program, a 10-yr delay in benefit realization was assumed. All benefits were converted to 1990 dollars. In benefit category 4, benefit-cost ratios for Boone/Winnebago Counties ranged between 5 and 55. Statewide projection of benefits was based on county areas and an aquifer contamination potential score for each county. Statewide benefit-cost ratio in benefit category 4 ranged from 1.2 to 14 ($21 million mapping costs) and from 0.5 to 5.4 ($55 million mapping costs). ?? 1992 Springer-Verlag New York Inc.

Environmental Geology and Water Sciences↗
USGS1991

Importance of geologic characterization of potential low-level radioactive waste disposal sites

Using the example of the Geff Alternative Site in Wayne County, Illinois, for the disposal of low-level radioactive waste, this paper demonstrates, from a policy and public opinion perspective, the importance of accurately determining site stratigraphy. Complete and accurate characterization of geologic materials and determination of site stratigraphy at potential low-level waste disposal sites provides the frame-work for subsequent hydrologic and geochemical investigations. Proper geologic characterization is critical to determine the long-term site stability and the extent of interactions of groundwater between the site and its surroundings. Failure to adequately characterize site stratigraphy can lead to the incorrect evaluation of the geology of a site, which in turn may result in a lack of public confidence. A potential problem of lack of public confidence was alleviated as a result of the resolution and proper definition of the Geff Alternative Site stratigraphy. The integrity of the investigation was not questioned and public perception was not compromised. ?? 1991 Springer-Verlag New York Inc.

Environmental Geology and Water Sciences↗
USGS1984

The origin and early genesis of clay bands in youthful sandy soils along lake Michigan, U.S.A.

A beach ridge and dune complex with good radiocarbon control sampling the last 3500 radiocarbon years B.P. provides new insights on the early genesis of clay bands in sandy soils. Soil profiles were sampled by age groups, described in the field, and then subjected to laboratory analyses for particle-size distribution, pH, organic carbon, carbonate minerals, and extractable iron and manganese. This study suggests that small increases in pH, brought about by small increases in carbonate content within the soil profile, are responsible for flocculating small amounts of illuviated clay. This process, along with a transition to a greater hydraulic conductivity with soil depth due to coarser textures in any given profile, partly explains the existence and possible reason for the initiation of illuvial zones and eventually for clay-band horizons. A pronounced increase in the thickness of incipient clay-band horizons in soils older than 2300 years appears due to finer textures in the parent materials than are present in younger soils. Because of slightly reduced porosity and lower permeability, carbonates and a high pH are retained in both illuvial and eluvial horizons of some of these older soils. In addition, only in those profiles older than 2300 years do clay and iron oxide concentrations coincide and is there some suggestion of greater amounts of extractable manganese in horizons of minimum iron and clay. A pronounced segregation of clay-iron bands is not apparent at the study area but should occur in future years as additional amounts of iron and clay are deposited.

Illinois, Wisconsin↗