Geology topics

Pradip Kumar Maurya

Publications and source records attributed to Pradip Kumar Maurya.

4 recordsLinked to original sources

USGS2025

Multi-scale geophysical imaging of a hydrothermal system in Yellowstone National Park, USA

Little is known about the local plumbing systems that fuel Yellowstone’s famous hot springs, geysers and mud pots. A multi-method, multi-scale geophysical investigation was carried out in the Obsidian Pool Thermal Area (OPTA) to: (i) delineate the lateral extent of the hydrothermal area and associated surface features; (ii) estimate the dimensions of the upflow zone and identify its main controlling structures; (iii) assess fluids circulation pathways from depth to surface. Ground and airborne geophysical data were acquired to connect local and regional scales, from shallow to large depths. Maps of surface electrical resistivity show a strong correlation with hydrothermal features. At in-termediate depths, electrical resistivity permits delineating the upper limit of the upflow zone, while Poisson’s ratio highlights differences in subsurface fluid content. Combining these results with surface observations and topographic information, we speculate that differential mixing of hydrothermal and fresh water could explain the wide diversity of features observed at OPTA. Low electrical resistivity observed at large depths also suggest that a vast upflow zone, controlled by rhyolite flows and conjugate faults, underlies the OPTA. We speculate that hydrothermal fluids rise along fractures and reach the surface in topographic lows to form hydrothermal features. Our results show that synoptic, multi-scale geophysical measurements provide a roadmap for understanding where and how geologic heterogeneity, topography, fluid-gas separation, and the mixing of thermal and meteoric waters conspire to produce the wide variety of Yellowstone’s renowned hydrothermal features.

Wyoming↗

USGS2022

Inversion of induced polarization-affected towed-transient electromagnetic data in a lateritic regolith geology: A case study from western Tanzania

For several decades, induced polarization (IP) effects on transient electromagnetic (TEM) responses have been observed. These effects can manifest as late-time negative transients or as rapidly decaying curves and are usually associated with highly polarizable bodies. If neglected, IP effects can lead to erroneous resistivity models. Recent work allows IP effects to be incorporated into the inversion of TEM data on a more routine basis. In a recent field survey in western Tanzania, strongly IP-affected TEM signals are observed using a towed-transient electromagnetic (tTEM) system. The survey have been carried out to locate drinking water resources in a weathered regolith setting. In these settings, an inversion of tTEM data using a resistivity-only forward model (i.e., IP neglected) cannot fit the data and severely limits the value of the TEM data for hydrogeologic interpretation. To account for IP effects, we have applied a modified version of the Cole-Cole model called the maximum phase angle (MPA) model to invert IP-affected tTEM data. The MPA model incorporates four inversion model parameters: resistivity ( ⁠ ρ "> ρ ), MPA ( ⁠ ϕ max "> ϕ max ⁠ ), relaxation time ( ⁠ τ "> τ ), and frequency exponent ( ⁠ c "> c ). The MPA model fits the data well and improves the reliability of the resistivity model. In much of the surveyed region, the inverted models using MPA display a three-layer system consisting of an upper resistive laterite layer of varying thickness and an intermediate polarizable conductive unit overlying more resistive weathered basement rocks. The conductive polarizable layer is interpreted as a chemically weathered saprolite separating the surficial and deeper aquifers. Overall, tTEM inversion results provide a local understanding of groundwater systems, especially in such regions with very limited subsurface knowledge.

Kaguruka, Kitagata↗

USGS2019

Use of a towed electromagnetic induction (tTem) system for shallow aquifer characterization – An example from the Mississippi Alluvial Plain

The Mississippi Alluvial Plain (MAP) aquifer system is a vital resource that supports agriculture in one of the most productive regions of the country. The U.S. Geological Survey Water Availability and Use Science Program (WAUSP) is conducting a multi-discipline investigation of the MAP aquifer system. The investigation is utilizing borehole, surface, and airborne geophysical methods to improve the characterization and understanding of the aquifer. The combination of geophysical data collected over a range of spatial scales with varying depths of investigation and resolution is key to determining the distribution of sand and clay within the aquifer. Mobile geophysical methods that enable continuous measurements over large areas improve aquifer characterization with their increased spatial coverage. In support of the MAP investigation, a new towed Time-Domain Electromagnetic (tTEM) imaging system developed by Aarhus University was used near Shellmound, Mississippi (MS), to delineate the distribution of coarse- and fine-grained sediments underlying the site. The tTEM results compare favorably with the results of airborne EM (AEM) surveys flown in the study and improve the resolution of sand and gravel distribution within the tTEM depth of investigation.

Mississippi↗

USGS2019

Application of a towed time-domain electromagnetic (tTEM) imaging system in Jamestown, North Dakota

Time-Domain Electromagnetic (EM) methods have been used for decades in support of groundwater investigations. A new towed Time-Domain EM system called “tTEM”, designed by Aarhus University, is being tested and evaluated under a collaborative research agreement with the U.S. Geological Survey (USGS). The tTEM system is rapid and efficient, providing high-resolution, nearly continuous profiles of subsurface resistivity useful for hydrostratigraphic mapping and assessment of aquifer materials. Here we provide an example of a tTEM survey conducted in Jamestown, North Dakota (ND). The purpose of the ND investigation was to assess tTEM the ability of the system to map coarse-grained materials within the Spiritwood Aquifer. The tTEM survey results compare favorably with the results of an airborne EM (AEM) survey previously conducted in the area and to lithologic logs from nearby boreholes.

North Dakota↗