Geology topics

Peter M. Valley

Publications and source records attributed to Peter M. Valley.

10 recordsLinked to original sources

USGS2026

Preliminary bedrock geologic map of the Port Henry quadrangle, Essex County, New York, and Addison County, Vermont

Introduction The bedrock geology of the 7.5-minute Port Henry quadrangle consists of deformed and metamorphosed Mesoproterozoic gneisses of the Adirondack Highlands unconformably overlain by weakly deformed lower Paleozoic sedimentary rocks of the Champlain Valley. The Mesoproterozoic rocks occur on the eastern edge of the Adirondack Highlands and represent an extension of the Grenville Province of Laurentia. Mesoproterozoic paragneiss, marble, and amphibolite hosted the emplacement of an anorthosite-mangerite-charnockite-granite (AMCG) suite, now exposed mostly as orthogneiss, at approximately 1.18–1.15 Ga (giga-annum). In the Port Henry quadrangle, the AMCG metaigneous rocks (Yhg, Ygb, Yanw) intruded older, mostly metasedimentary rocks of the Grenville Complex during the middle to late Shawinigan orogeny (~1,160–1,150 Ma [mega-annum]). All rocks were subsequently metamorphosed to upper amphibolite to granulite facies conditions during the 1,080–1,050 Ma Ottawan orogeny. New mapping reveals four periods of deformation: (1) D1 produced rarely preserved isoclinal folds in the paragneiss and marble and predates AMCG magmatism. (2) Subsequent D2 deformation produced the dominant gneissic fabric preserved in the rock, recumbent folding, and deformed all the Proterozoic units in the map area. Syn- to late-D2 felsic magmatism resulted in the regionally extensive Lyon Mountain Granite Gneiss, which hosts numerous magnetite ore bodies. (3) Mylonitic extensional shear zones and core complex formation marked the beginning of D3 deformation. Protracted D3 deformation resulted in F3 upright folding, dome and basin formation, pegmatite intrusion, reactivation of the S2 foliation, partial melting, metamorphism, metasomatism, iron-ore remobilization, and intrusion of magnetite-bearing pegmatite both as layer-parallel sills and crosscutting dikes. (4) D4 created northeast- and northwest-trending local high-grade ductile shear zones and boudinage, northwest-trending regional kilometer (km)-wide ductile shear zones, and crosscutting granitic pegmatite dikes. The development of the late-stage regional shear zones (D4) was likely due to the continuation of extensional doming and uplift from upper amphibolite facies conditions at the end of the Ottawan orogeny. The majority of iron-ore deposits in the Port Henry and adjacent Witherbee quadrangles are in the hanging wall of these extensional shear zones. In the Port Henry quadrangle, the km-wide Cheney Mountain shear zone is the result of D4 deformation. Kilometer-scale lineaments readily observed in lidar data are Ediacaran mafic dikes and Phanerozoic brittle faults. The Paleozoic rocks are part of the Early Cambrian to Late Ordovician carbonate bank on the ancient margin of Laurentia. The approximately 1-km-thick Cambrian to Ordovician stratigraphy records a transition from synrift clastics to passive-margin peritidal carbonate buildups to gradually deeper-water subtidal- to shelf-carbonates during foreland basin development associated with the Taconic orogeny. The Paleozoic rocks are weakly folded and block faulted. Large areas of the Champlain Valley are covered by undifferentiated glacial deposits, some of which contain mapped landslides. The map also shows waste rock piles and tailings from historical mining operations. This study was undertaken to improve our understanding of the bedrock geology in the Adirondack Highlands, establish a modern framework for 1:24,000-scale bedrock geologic mapping in the Adirondacks, provide a context for historical iron mines in the eastern Adirondacks, and update the stratigraphy of the Champlain Valley in New York and Vermont. This Open-File Report includes a bedrock geologic map; a description of map units; a correlation of map units; and a geographic information system database that includes bedrock geologic units, faults, outcrops, and structural geologic information.

New York, Vermont↗

USGS2025

Bedrock geologic map of the Bellows Falls 7.5- x 15-minute quadrangle, Windham and Windsor Counties, Vermont, and Sullivan and Cheshire Counties, New Hampshire

Introduction The bedrock geology of the Bellows Falls 7.5- x 15-minute quadrangle, Vermont and New Hampshire, consists of polydeformed Ordovician to Devonian metasedimentary, metavolcanic, and metaplutonic rocks of the Connecticut Valley trough, Bronson Hill anticlinorium (or Bronson Hill terrane), and the Central Maine terrane. Previous work in this area includes a 1:62,500-scale published map and text (1946), State geologic maps of New Hampshire (1997) and Vermont (2011), and various maps and reports presented largely as parts of field trip guidebooks. A provisional open-file map of the geology of the Vermont part of the Bellows Falls 7.5- x 15-minute quadrangle, completed in 1997, is incorporated and revised on this map based on additional fieldwork. This study recognizes three major structural levels from west to east and from lowest to highest: (1) autochthonous rocks of the Connecticut Valley trough; (2) allochthonous rocks of the New Hampshire sequence and Bronson Hill arc in the Monroe thrust sheet (or nappe), including the Skitchewaug nappe; and (3) allochthonous rocks of the Fall Mountain thrust sheet or nappe.

New Hampshire, Vermont↗

USGS2025

Geochemical and tectonic evolution of the Ordovician Bronson Hill arc and Silurian and Devonian Connecticut Valley–Gaspé trough: Eastern Vermont and western New Hampshire, USA

We present major and trace element whole-rock geochemistry of 94 samples from the Bronson Hill arc (BHA) and Connecticut Valley–Gaspé trough (CVGT). These data, when combined with recent zircon U-Pb geochronology and a reexamination of existing whole-rock geochemistry, enable a new analysis of the tectonic history of the ancient Laurentian-Ganderian margin in the northern Appalachians of New England, USA, and southeastern Canada. The whole-rock geochemical data from the Ordovician BHA in western New Hampshire indicate that metamorphosed extrusive and intrusive rocks share the same temporally variable geochemical fingerprint. Mafic and felsic rocks form a bimodal distribution and plot as island arc magmas on geochemical discrimination diagrams. Approximately 80% of mafic greenstone and amphibolite samples plot as island arc tholeiites with a subset of samples that trend toward a more within-plate basalt geochemical signature. Where ages are known, older felsic rocks (ca. 475–460 Ma) in the BHA tend to be more sodic and less potassic than their younger (ca. 460–445 Ma) counterparts, and the geochemical results trend from volcanic arc granites toward syn-collisional granites through time. Prior to recent geochronology, it was thought that an age gap existed between the island arc magmas and the syn collisional granites. This led to the separation of felsic plutons into the predominantly older trondhjemitic magmas assigned to the Ammonoosuc Volcanics and a younger suite of granites designated as the Oliverian Plutonic Suite. This age gap was thought to represent a flip in subduction polarity which would also account for observed changes in pluton chemistry. With the addition of more recent U-Pb isotopic age data, we now know there is a continuum of ages, and a polarity flip is no longer required. When the isotopic ages are combined with the new geochemical data presented here, they suggest that as the BHA approached and collided with Laurentia ca. 455 Ma, continental material was assimilated into the magma, and there was a transition from trondhjemite to granodiorite and granite magmas in felsic rocks and from island arc tholeiite toward more alkali-rich basalt with a continental signature in mafic magmas. The similarities in whole-rock and trace element geochemistry, rock type, and range of isotopic ages from the Ammonoosuc Volcanics, Partridge Formation, and Oliverian Plutonic Suite, suggest they originated from the same magma source and were part of one evolving island arc system that persisted throughout the Ordovician, and the need to separate the Oliverian Plutonic Suite from the Ammonoosuc Volcanics is not necessary. Most magmatism in the BHA ceased ca. 440 Ma. Following the Taconic orogeny, Silurian basin development was widespread along the length of the Laurentian-Ganderian suture. In New England and Québec, this resulted in the formation of the CVGT. The BHA and the CVGT are generally studied separately: the BHA in the context of arc-continent collision during the Taconic orogeny, and the CVGT as it relates to post-orogenic extension or the distal effects of the Salinic disturbance. When viewed collectively, the igneous geochemistry of the BHA and CVGT reveals an overlap between the waning stages of Taconic orogenesis and the onset of Silurian to Devonian basin development in the northern Appalachians. Metamorphosed bimodal volcanic and intrusive rocks are present in the CVGT (ca. 434–407 Ma) and Silurian cover sequence, which unconformably overlies the BHA. Mafic rocks in the CVGT are mostly tholeiitic basalts with a subset of alkali basalt in the Waits River Formation. Tectonic discrimination diagrams show that the mafic rocks are a mix of mid-ocean ridge basalt to within-plate basalt. The felsic rocks in the CVGT are mostly metamorphosed volcanic rocks that vary from island arc granite to within-plate granite. The geochemical signature of the CVGT is consistent with a post-collisional intra-arc basin, where slab breakoff or crustal attenuation played a key role before transitioning to a deepening foreland basin at the beginning of the Acadian orogeny.

New Hampshire, Vermont↗

USGS2021

Unmixing multiple metamorphic muscovite age populations with powder X-ray diffraction and 40Ar/39Ar analysis

A combination of modal estimates from powder X-ray diffraction (XRD) experiments and argon isotopic data shows that muscovite 40 Ar/ 39 Ar total gas age correlates with muscovite composition near the retrograde Bald Mountain shear zone (BMSZ) in Claremont, New Hampshire, and that the shear zone was active at ∼245 Ma. Petrologic study demonstrates that chemical disequilibrium is preserved in muscovite grains in these samples. The recognition of this preservation is critical to the interpretation of the 40 Ar/ 39 Ar step-heating experiments, which never produce age plateaus and yield spectra with steps that range in age by ∼20 Ma. Petrographic, compositional, and crystallographic data all indicate that the age spectra reflect dissolution of metastable Na-rich muscovite and precipitation of stable Na-poor muscovite associated with deformation in the BMSZ.Comparison of whole rock and muscovite concentrate XRD patterns from individual samples demonstrates that the mineral separation process can fractionate these muscovite populations. Therefore, four muscovite concentrates of varying magnetic susceptibility were prepared from a single hand sample, analyzed by XRD, and dated. These four splits define a mixing line that resolves end-member ages of 244.5 ± 4.2 Ma and 302.5 ± 12.5 Ma (1σ). Although the ages are imprecise, the petrologically supported conclusion that these schists preserve two discrete ages is distinct from an interpretation that the spectra reflect cooling through closure at ∼270 Ma, as might be concluded in the absence of petrologic characterization. The XRD results also demonstrate that, even well above anchizone conditions, petrologic information relevant to 40 Ar/ 39 Ar dating is observable in subtle variations in the crystallography of muscovite grains.

New Hampshire↗

USGS2020

Bedrock geologic map of the Springfield 7.5- x 15-minute quadrangle, Windsor County, Vermont, and Sullivan County, New Hampshire

The bedrock geology of the 7.5- by 15-minute Springfield quadrangle consists of highly deformed and metamorphosed Mesoproterozoic through Devonian metasedimentary and meta-igneous rocks. In the west, Mesoproterozoic gneisses of the Mount Holly Complex are the oldest rocks and form the eastern side of the Chester dome. The Moretown slice structurally overlies the Chester dome along the Keyes Mountain thrust fault which represents the Ordovician Taconic suture (Red Indian Line) between Laurentian and Ganderian crust. The allochthonous Cambrian through Ordovician Moretown slice includes the Moretown and Cram Hill Formations and the North River Igneous Suite. Silurian and Devonian metasedimentary and metavolcanic rocks of the Connecticut Valley trough (CVT) unconformably overlie the Moretown slice. Ordovician to Silurian and Devonian metasedimentary and meta-igneous rocks of the New Hampshire sequence structurally overlie the CVT along the Devonian, Acadian Monroe thrust fault. The oldest part of the New Hampshire sequence consists of Ordovician metamorphosed volcanic, plutonic, and sedimentary rocks of the Bronson Hill arc including the Ammonoosuc Volcanics, the Partridge Formation, and the Oliverian Plutonic Suite. The Ammonoosuc Volcanics are the base of the exposed arc section in the map area. The Bronson Hill arc rocks are exposed in fault-bounded structural belts, including the Monroe thrust sheet, the Claremont belt, the Sugar River and Unity domes, and the footwall of the Brennan Hill thrust fault. Silurian to Devonian metasedimentary rocks of the Clough Quartzite, and Fitch and Littleton Formations unconformably overlie the Bronson Hill arc rocks. Devonian granitic and pegmatitic dikes and sills of the New Hampshire Plutonic Suite intruded previously deformed rocks. Devonian, Acadian F 1 fold nappes have a sheath fold geometry and are truncated by multiple generations of faults. The Bronson Hill arc structurally overlies the CVT along the Acadian Monroe fault with preserved tectonic mélange in the footwall. Upright dome-stage F 2 folds post-date amphibolite facies metamorphism and locally developed into sheath folds in high-strain zones. F 3 folds exhibit sinistral rotation associated with Alleghanian lower-greenschist facies faults. Late Paleozoic Alleghanian to Mesozoic shear zones transpose stratigraphy, early structures, and peak metamorphic isograds. 40 Ar/ 39 Ar white-mica growth ages (300–250 million years before present [Ma]) indicate that retrograde deformation continued into the latest Paleozoic and earliest Mesozoic. Apatite fission track data show that brittle faults were active prior to about 100 Ma and experienced Late Cretaceous and even Paleocene re-activation. The bedrock geology was mapped to study the tectonic history of the area and to provide a framework for ongoing characterization of the bedrock of Vermont and New Hampshire. This Scientific Investigations Map of the Springfield 7.5- x 15-minute quadrangle consists of sheets 1 and 2 as well as a geographic information system (GIS) database that includes bedrock geologic units, faults, outcrops, and structural geologic information. Sheet 1 of the report includes a bedrock geologic map, a correlation of map units, and a description of map units. Sheet 2 includes a discussion of the geology, references cited, two cross sections from the geologic map on sheet 1, a tectonic map showing major structural features, and a structural domain map showing the orientation of brittle features.

New Hampshire, Vermont↗

USGS2020

Bedrock geologic map of the Mount Ascutney 7.5- x 15-minute quadrangle, Windsor County, Vermont, and Sullivan County, New Hampshire

The bedrock geology of the Mount Ascutney 7.5- x 15-minute quadrangle consists of highly deformed and metamorphosed Mesoproterozoic through Devonian metasedimentary and meta-igneous rocks intruded by rocks of the Mesozoic White Mountain Igneous Suite. In the west, Mesoproterozoic gneisses of the Mount Holly Complex are the oldest rocks and form the northeastern flank of the Chester dome. The allochthonous Cambrian through Ordovician rocks include the Moretown and Cram Hill Formations and the North River Igneous Suite; these rocks structurally overlie the Chester dome along the Keyes Mountain thrust fault. Silurian and Devonian metasedimentary and metavolcanic rocks of the Connecticut Valley trough (CVT) unconformably overlie the pre-Silurian rocks. The easternmost extent of the CVT in New Hampshire is exposed in the Meriden antiform. Ordovician to Silurian and Devonian metasedimentary rocks of the Bronson Hill anticlinorium structurally overlie the CVT along the Monroe thrust fault. The oldest part of the Bronson Hill anticlinorium, called the Bronson Hill arc, consists of Ordovician metamorphosed volcanic, plutonic, and sedimentary rocks of the Ammonoosuc Volcanics, the Partridge Formation, and the Oliverian Plutonic Suite. The rocks of the Bronson Hill arc may be partly correlative with the pre-Silurian rocks above the Chester dome and are exposed in two fault-bounded structural belts (Cornish City and Claremont belts) and in the Sugar River dome. Collectively, these belts form the regional Orfordville anticlinorium, Hardscrabble synclinorium, and the western part of the broader Bronson Hill anticlinorium in western New Hampshire. Silurian to Devonian metasedimentary rocks of the Clough Quartzite, and Fitch and Littleton Formations unconformably overlie the rocks of the Bronson Hill arc. Devonian granitic and pegmatitic dikes and sills of the New Hampshire Plutonic Suite intruded previously deformed rocks. Post-tectonic Cretaceous plutonic and volcanic rocks of the Ascutney Mountain Intrusive Complex underlie Mount Ascutney. Because of the historically significant scientific research, and its prominence in the landscape, Mount Ascutney is commonly regarded as Vermont’s most famous volcano. The bedrock geology was mapped to study the tectonic history of the area and to provide a framework for ongoing characterization of the bedrock of Vermont and New Hampshire. This Scientific Investigations Map of the Mount Ascutney 7.5- x 15-minute quadrangle consists of sheets 1 and 2 as well as a geographic information system (GIS) database that includes bedrock geologic units, faults, outcrops, structural geologic information, geochemistry, and photographs. Sheet 1 of the report includes a bedrock geologic map, a correlation of map units, and a description of map units. Sheet 2 includes a discussion of the geology, references, three cross sections from the geologic map on sheet 1, igneous rock geochemistry results of the main map units from the Mount Ascutney stock, a tectonic map showing major structural features, and a structural domain map showing the orientation and distribution of brittle features.

New Hampshire, Vermont↗

USGS2020

A transect through Vermont's most famous volcano - Mount Ascutney

The Cretaceous Ascutney Mountain igneous complex affords a classic exposure of the White Mountain Igneous Suite. Often called Vermont’s most famous volcano, Mount Ascutney (elev. 3,144 feet, 958 m) stands as a prominent monadnock in the Connecticut River Valley. The mountain often serves as an inspirational landmark, as it does when viewed from locations throughout the valley including the Saint-Gaudens National Historic Site (Walsh, 2017). The Ascutney Mountain igneous complex (Ratcliffe and others, 2011) consists of several mafic to felsic nested plutons including gabbro-diorite exposed at Little Ascutney to the west, and the Ascutney Mountain stock composed of syenite, granite, and related volcanic rocks underlying the main summit to the east (Fig. 1) (Schneiderman, 1989, 1991). Foland and Faul (1977) and Foland and others (1985) dated the gabbro-diorite complex at 125.5 to 122.2 Ma by K-Ar on biotite and by whole rock Rb/Sr, and dated the syenite-granite complex at 123.2 to 121.4 Ma by K-Ar on biotite. During the field trip we will visit the host rocks south of the mountain and the main rocks types of the Ascutney Mountain stock exposed near the summit and along the Mount Ascutney toll road. Mount Ascutney is the classic location where Daly (1903) discussed the evidence for piecemeal stoping as a pluton emplacement mechanism. This theory was later modified to favor cauldron subsidence, or ring-fracture stoping, as an alternative mode of emplacement (Chapman and Chapman, 1940). Our new mapping (Walsh and others, in press), which supersedes an earlier provisional study (Walsh and others, 1996a, b), supports the cauldron subsidence model, and shows that the main Ascutney Mountain stock is a funnel shaped composite pluton in agreement with geophysical data (Daniels, 1990). This field guide will primarily highlight the results of the new geologic mapping. This field guide is modified from a field trip presented in 2017 (Walsh, 2017). Additional stops have been added to examine the host rocks in the region south of the Ascutney Mountain stock. Two hikes are planned as part of this trip. Other NEIGC field trip guides to Mount Ascutney include Stoiber (1954) and Schneiderman (1988).

Vermont↗

USGS2019

Geochronology of the Oliverian Plutonic Suite and the Ammonoosuc Volcanics in the Bronson Hill arc: Western New Hampshire, USA

U-Pb zircon geochronology by sensitive high-resolution ion microprobe–reverse geometry (SHRIMP-RG) on 11 plutonic rocks and two volcanic rocks from the Bronson Hill arc in western New Hampshire yielded Early to Late Ordovician ages ranging from 475 to 445 Ma. Ages from Oliverian Plutonic Suite rocks that intrude a largely mafic lower section of the Ammonoosuc Volcanics ranged from 474.8 ± 5.2 to 460.2 ± 3.4 Ma. Metamorphosed felsic volcanic rocks from within the Ammonoosuc Volcanics yielded ages of 460.1 ± 2.4 and 455.0 ± 11 Ma. Younger Oliverian Plutonic Suite rocks that either intrude both the upper and lower Ammonoosuc Volcanics or Partridge Formation ranged in age from 456.1 ± 6.7 Ma to 445.2 ± 6.7 Ma. These new data and previously published results document extended magmatism for >30 m.y. The ages, along with the lack of mappable structural discontinuities between the plutons and their volcanic cover, suggest that the Bronson Hill arc was part of a relatively long-lived composite arc. The Early to Late Ordovician ages presented here overlap with previously determined igneous U-Pb zircon ages in the Shelburne Falls arc to the west, suggesting that the Bronson Hill arc and the Shelburne Falls arc could be part of one, long-lived composite arc system, in agreement with the interpretation that the Iapetus suture (Red Indian Line) lies to the west of the Shelburne Falls–Bronson Hill arc system.

New Hampshire↗

USGS2016

Reaction softening by dissolution–precipitation creep in a retrograde greenschist facies ductile shear zone, New Hampshire, USA

We describe strain localization by a mixed process of reaction and microstructural softening in a lower greenschist facies ductile fault zone that transposes and replaces middle to upper amphibolite facies fabrics and mineral assemblages in the host schist of the Littleton Formation near Claremont, New Hampshire. Here, Na-poor muscovite and chlorite progressively replace first staurolite, then garnet, and finally biotite porphyroblasts as the core of the fault zone is approached. Across the transect, higher grade fabric-forming Na-rich muscovite is also progressively replaced by fabric-forming Na-poor muscovite. The mineralogy of the new phyllonitic fault-rock produced is dominated by Na-poor muscovite and chlorite together with late albite porphyroblasts. The replacement of the amphibolite facies porphyroblasts by muscovite and chlorite is pseudomorphic in some samples and shows that the chemical metastability of the porphyroblasts is sufficient to drive replacement. In contrast, element mapping shows that fabric-forming Na-rich muscovite is selectively replaced at high-strain microstructural sites, indicating that strain energy played an important role in activating the dissolution of the compositionally metastable muscovite. The replacement of strong, high-grade porphyroblasts by weaker Na-poor muscovite and chlorite constitutes reaction softening. The crystallization of parallel and contiguous mica in the retrograde foliation at the expense of the earlier and locally crenulated Na-rich muscovite-defined foliation destroys not only the metastable high-grade mineralogy, but also its stronger geometry. This process constitutes both reaction and microstructural softening. The deformation mechanism here was thus one of dissolution–precipitation creep, activated at considerably lower stresses than might be predicted in quartzofeldspathic rocks at the same lower greenschist facies conditions.

New Hampshire↗

USGS2012

A transect through the base of the Bronson Hill Terrane in western New Hampshire

This trip will present the preliminary results of ongoing bedrock mapping in the North Hartland and Claremont North 7.5-minute quadrangles in western New Hampshire. The trip will travel from the Lebanon pluton to just north of the Sugar River pluton (Fig. 1) with the aim of examining the lower structural levels of the Bronson Hill anticlinorium (BHA), and the nature of the boundary with the rocks of the Connecticut Valley trough (CVT). Spear and others (2002, 2003, 2008) proposed that western New Hampshire was characterized by five major faults bounding five structural levels including, from lowest to highest, the “chicken yard line”, Western New Hampshire Boundary Thrust, Skitchewaug nappe, Fall Mountain nappe, and Chesham Pond nappe. Lyons and others (1996, 1997) showed the lowest level cored by the Cornish nappe and floored by the Monroe fault. Thompson and others (1968) explained the geometry of units by folding without major thrust faults, and described the second level as the Skitchewaug nappe. This trip will focus on the two lowest levels which we have revised to call the Monroe and Skitchewaug Mountain thrust sheets. Despite decades of geologic mapping in the northeastern United States at various scales, little 1:24,000-scale (or larger scale) modern bedrock mapping has been published for the state of New Hampshire. In fact, of the New England states, New Hampshire contains the fewest published, modern bedrock geologic maps. Conversely, adjacent Vermont has a relatively high percentage of modern bedrock maps due to focused efforts to create a new state-wide bedrock geologic map over the last few decades. The new Vermont map (Ratcliffe and others, 2011) has identified considerable gaps in our knowledge of the bedrock geology in adjacent New Hampshire where published maps are, in places, more than 50 years old and at scales ranging from 1:62,500 to 1:250,000. Fundamental questions remain concerning the geology across the Connecticut River, especially in regards to the stratigraphy of the BHA and CVT, and the distribution, or even existence, of faults ranging in age from Devonian to Mesozoic (e.g., Spear and others, 2008; McWilliams and others, 2010; Walsh and others, 2010). Questions to ponder on this trip include, but are not limited to: 1) Is the Bronson Hill anticlinorium allochthonous? 2) What is the crust beneath the Bronson Hill anticlinorium? 3) Is there a “Big Staurolite nappe” as proposed by Spear and others (2002, 2003, 2008)? 4) What is the role of Taconic, Acadian, and Alleghanian orogenesis in the tectonic development of the region? Modern 1:24,000-scale mapping is the first step towards answering these questions. Mapping will be supplemented by modern geochronology and geochemistry as this project develops. We plan to share some of our provisional results during this field trip.

New Hampshire↗