Search USGS⌕ Search

Geology topics

Peter D. Warwick

Publications and source records attributed to Peter D. Warwick.

At least 163 records · Page 9Linked to original sources
USGS1996

Assessing the coal resources of the United States

In 1994, coal production in the United States reached the highest level in history (slightly more than 909 million metric tons or one billion short tons), continuing the upward trend of coal production and utilization that began 34 years ago. Previous assessments of the coal resources of the United States, which were completed as early as 1909, clearly indicated that the total coal resources of the Nation are large and that utilization at the current rate will not soon deplete them.

Fact Sheet↗
USGS1995

Petrography, geochemistry, and depositional setting of the San Pedro and Santo Tomas coal zones: Anomalous algae-rich coals in the middle part of the Claiborne Group (Eocene) of Webb County, Texas

Two coal zones, the San Pedro and the overlying Santo Tomas, are present for nearly 35 km in outcrop, surface and underground mines, and shallow drill holes along the strike of the middle part of the Claiborne Group (Eocene) in Webb County, Texas. A sandstone-dominated interval of 25 to 35 m separates the two coal zones, which range up to 3 m in thickness. Each coal zone contains carbonaceous shales, thin (<0.75 m) impure coal beds, and thin (<0.85 m) but commercially significant nonbanded coal beds. The nonbanded coals are different from other Tertiary coals of the Gulf of Mexico Coastal Plain: unlike lignites that are typical of the older Wilcox Group (Paleocene-Eocene) and younger Jackson Group (Eocene), nonbanded coals of the Claiborne Group have high vitrinite-reflectance values (0.53 R max ) and high calorific yields (average 6670 kcal/kg or 12,000 Btu, dry basis). The coals are weakly agglomerating (free-swelling index is 1.5–2.0) and have an apparent rank of high-volatile bituminous. The coal-bearing portion of the middle Claiborne Group in the Rio Grande area represents a fining-upward transition from sandstone-dominated, marine-influenced, lower delta plain depositional environments to more inland, mudstone-rich, predominantly freshwater deltaic settings. Discontinuities within the San Pedro coal zone are attributed mainly to the influence of contemporaneous deposition of distributary mouth-bar sand bodies. The less variable nature of the Santo Tomas coal zone reflects its origin in the upper part of an interlobe basin that received only minor clastic influx. Petrographic attributes of the nonbanded coals indicate that they formed subaqueously in fresh to possibly brackish waters. A highly degraded groundmass composed of eugelinite is the main petrographic component (approximately 71%, mineral-matter-free basis). An enriched liptinite fraction (approximately 23%) probably accounts for unusually high calorific values. There is negligible inertinite. Petrographic study of polished blocks indicates that approximately 10 percent of the nonbanded coal from both coal zones is composed of green algae fructifications, which also occur in clastic rocks of the coal-bearing interval. Such algal material cannot be identified or quantified by conventional coal petrographic techniques that utilize particle pellets or by palynological analyses that include acid preparation.

International Journal of Coal Geology↗
USGS1995

Lithofacies and palynostratigraphy of some Cretaceous and Paleocene rocks, Surghar and Salt Range coal fields, northern Pakistan

The stratigraphic relation between the Cretaceous generally non-coal-bearing Lumshiwal Formation (64 to 150 m thick) and the Paleocene coal-bearing Hangu Formation (5 to 50 m thick) in the Surghar Range of north-central Pakistan is complex. Both formations contain remarkably similar lithofacies: one or two types of sandstone lithofacies; a combined lithofacies of mudstone, claystone, carbonaceous shale, and coal beds; and a rare carbonate lithofacies. An analysis of pollen data from rock samples collected from various stratigraphic positions indicates that the formations are separated by a disconformity and that the age of the Lumshiwal Formation is Early Cretaceous and the age of the Hangu is Paleocene. Previous workers had suggested that the age of the Lumshiwal is Late Cretaceous. An analysis of sedimentologic, stratigraphic, and paleontologic data indicates that both the Lumshiwal and Hangu Formations probably were deposited in shallow-marine and deltaic environments. The rocks of the Lumshiwal become more terrestrial in origin upward, whereas the rocks of the Hangu become more marine in origin upward. The contact between the two formations is associated with a laterally discontinuous lateritic paleosol (assigned to the Hangu Formation) that is commonly overlain by the economically important Makarwal coal bed. This coal bed averages 1.2 m in thickness. No other coal beds in the Surghar Range are as thick or as laterally continuous as the Makarwal coal bed. Analytical data from the Makarwal and one other Hangu coal bed indicate that Surghar Range coal beds range from high-volatile B to high-volatile C bituminous in apparent rank. Averaged, as-received results of proximate and ultimate analyses of coal samples are (1) moisture content, 5.4 percent; (2) ash yield, 12.5 percent; (3) total sulfur content, 5 percent; and (4) calorific value, 11034 Btu/lb (British thermal units per pound). Minor- and trace-element analyses indicate that these coals contain relatively high concentrations of the environmentally sensitive element selenium (average 13.4 ppm (parts per million)), compared to concentrations from United States coals of similar rank. The Makarwal coal bed represents a paleopeat that formed during changing relative ground-water base levels. Relatively low base levels were associated with periods of slow clastic deposition and lateritic paleosol development, followed by relatively high base levels that coincided with increased runoff, marine flooding, and clastic sedimentation that buried the paleopeat of the Makarwal. These environments formed along the northwestern margin of the Indian subcontinent as it drifted northward through equatorial latitudes in the Tethys Sea. The Makarwal coal bed is thin or absent in the northern part of the range where the Lumshiwal and Hangu Formations are the thinnest. Such rapid lateral changes (over about 25 km) in formation thickness and the apparent change in relative ground-water base level indicate that tectonically induced subsidence rates varied across the Surghar Range and influenced the deposition of the rocks that compose the two formations.

Bulletin↗
USGS1995

Coal geology of the Paleocene-Eocene Calvert Bluff Formation (Wilcox Group) and the Eocene Manning Formation (Jackson Group) in east-central Texas: Field trip guidebook for the Society for Organic Petrology, Twelfth Annual Meeting, The Woodlands, Texas, August 30, 1995

The Jackson and Wilcox Groups of eastern Texas (fig. 1) are the major lignite producing intervals in the Gulf Region. Within these groups, the major lignite-producing formations are the Paleocene-Eocene Calvert Bluff Formation (Wilcox) and the Eocene Manning Formation (Jackson). According to the Keystone Coal Industry Manual (Maclean Hunter Publishing Company, 1994), the Gulf Coast basin produces about 57 million short tons of lignite annually. The state of Texas ranks number 6 in coal production in the United States. Most of the lignite is used for electric power generation in mine-mouth power plant facilities. In recent years, particular interest has been given to lignite quality and the distribution and concentration of about a dozen trace elements that have been identified as potential hazardous air pollutants (HAPs) by the 1990 Clean Air Act Amendments. As pointed out by Oman and Finkelman (1994), Gulf Coast lignite deposits have elevated concentrations of many of the HAPs elements (Be, Cd, Co, Cr, Hg, Mn, Se, U) on a as-received gm/mmBtu basis when compared to other United States coal deposits used for fuel in thermo-electric power plants. Although regulations have not yet been established for acceptable emissions of the HAPs elements during coal burning, considerable research effort has been given to the characterization of these elements in coal feed stocks. The general purpose of the present field trip and of the accompanying collection of papers is to investigate how various aspects of east Texas lignite geology might collectively influence the quality of the lignite fuel. We hope that this collection of papers will help future researchers understand the complex, multifaceted interrelations of coal geology, petrology, palynology and coal quality, and that this introduction to the geology of the lignite deposits of east Texas might serve as a stimulus for new ideas to be applied to other coal basins in the U.S. and abroad.

Texas↗
USGS1994

Principal reference section for part of the Eocene Ghazij Formation, Gishtari Nala area, Mach coal field, Balochistan, Pakistan

The information presented on this sheet was collected as part of a joint U.S. Geological Survey-Geological Survey of Pakistan program sponsored by the U.S. Agency for International Development. As a project within this program, the coal-bearing Ghazij Formation (Eocene) was investigated in the northeastern part of Balochistan east and south of the provincial capital of Quetta. Strata exposed in this area range in age from Permian to Holocene and crop out as a belt of folded and thrusted rocks that form a southeast-facing orocline. In this region of Pakistan, the Ghazij can usually be divided into three parts. The lower part is the thickest (probably more than 1,000 m) and consists of gray-weathering calcareous mudrock (shale, mudstone, and impure claystone) and a few tabular bodies of fine-to medium-grained calcareous sandstone. The middle part (27-300 m) consists of gray-weathering calcareous mudrock and tabular to lenticular bodies of fine- to medium-grained calcareous sandstone; beds of carbonaceous shale and coal are common (in the Mach area, the middle part of the formation also contains numerous individual beds of muddy limestone). The upper part (as thick as 533 m) contains reddish-weathering calcareous mudrock that contains scattered lenticular bodies of fine-to medium-grained calcareous sandstone. Fossil plant debris is common in mudrock of the lower and middle parts of the Ghazij and bivalves and gastropods are common in the middle part of the formation; the upper part of the Ghazij is usually unfossiliferous. Underlying the Ghazij are the carbonate rocks of the Paleocene Dungan Formation (or its equivalent), and overlying the Ghazij are the mostly carbonate rocks of the Eocene Kirthar Formation (or its equivalent). Both contacts can be conformable or unconformable. All of the pre-Neogene rocks in Balochistan are greatly deformed by the collision of India and Asia. The Ghazij is especially susceptible to regional compressional tectonics because it contains large amounts of shale and is sandwiched between two thick carbonate units. As a result, bedding-plane faults and isoclinal folds are very common. As part of our study of the Ghazij Formation, five stratigraphic sections were measured: one near Pir Ismail Ziarat, one in the Sor Range, two in the vicinity of Mach, and one near Johan. Each area's section is published separately.

Balochistan↗
USGS1994

Principal reference section for part of the Eocene Ghazij Formation, Moghal Mine area, Mach coal field, Balochistan, Pakistan

The information presented on this sheet was collected as part of a joint U.S. Geological Survey-Geological Survey of Pakistan program sponsored by the U.S. Agency for International Development. As a project within this program, the coal-bearing Ghazij Formation (Eocene) was investigated in the northeastern part of Balochistan cast and south of the provincial capital of Quetta. Strata exposed in this area range in age from Permian to Holocene and crop out as a belt of folded and thrusted rocks that form a southeast-facing orocline. In this region of Pakistan, the Ghazij can usually be divided into three parts. The lower part is the thickest (probably more than 1,000 m) and consists of gray-weathering calcareous mudrock (shale, mudstone, and impure claystone) and a few tabular bodies of fine-to medium-grained calcareous sandstone. The middle part (27-300 m) consists of gray-weathering calcareous mudrock and tabular to lenticular bodies of fine-to medium-grained calcareous sandstone; beds of carbonaceous shale and coal are common. The upper part (as thick as 533 m) contains reddish-weathering calcareous mudrock that contains scattered lenticular bodies of fine- to medium-grained calcareous sandstone. Fossil plant debris is common in mudrock of the lower and middle parts of the Ghazij, and bivalves and gastropods are common in the middle part; the upper part of the Ghazij is usually unfossiliferous. This three-fold division of the Ghazij is less distinct in the Johan area. Here, the upper part of the formation is clearly identifiable, but rocks below it are poorly exposed and assigning a stratigraphic level that separates the middle and lower parts of the formation is problematic. Below the upper part of the formation is a thick sequence of greenish-gray calcareous mudrock that contains locally abundant plant debris and isolated bodies of brown-weathering sandstone. Rare carbonaceous shale and even rarer coal are present in the upper part of this sequence, and this interval of the formation might correspond to the middle part of the Ghazji exposed in areas to the north. We propose that, in the Johan area, those rocks below the upper part of the formation be referred to as the main body of the Ghazij (for example, main-body Ghazij). Underlying the Ghazij are the carbonate rocks of the Paleocene Dungan Formation (or its equivalent), and overlying the Ghazij are the mostly carbonate rocks of the Eocene Kirthar Formation (or its equivalent). Both contacts can be conformable or unconformable. All of the pre-Neogene rocks in Balochistan are greatly deformed by the collision of India and Asia. The Ghazij is especially susceptible to regional compressional tectonics because it contains a large amount of shale and is sandwiched between two thick carbonate units. As a result, bedding-plane faults and isoclinal folds are common. As part of our study of the Ghazij Formation, five stratigraphic sections were measured: one near Pir Ismail Ziarat, one in the Sor Range, two in the vicinity of Mach, and one near Johan. Each area's section is published separately.

Balochistan↗
USGS1994

Principal reference section for part of the Eocene Ghazij Formation, Sarawan River area, Johan coal field, Balochistan, Pakistan

The information presented on this sheet was collected as part of a joint U.S. Geological Survey-Geological Survey of Pakistan program sponsored by the U.S. Agency for International Development. As a project within this program, the coal-bearing Ghazij Formation (Eocene) was investigated in the northeastern part of Balochistan cast and south of the provincial capital of Quetta. Strata exposed in this area range in age from Permian to Holocene and crop out as a belt of folded and thrusted rocks that form a southeast-facing orocline. In this region of Pakistan, the Ghazij can usually be divided into three parts. The lower part is the thickest (probably more than 1,000 m) and consists of gray-weathering calcareous mudrock (shale, mudstone, and impure claystone) and a few tabular bodies of fine-to medium-grained calcareous sandstone. The middle part (27-300 m) consists of gray-weathering calcareous mudrock and tabular to lenticular bodies of fine-to medium-grained calcareous sandstone; beds of carbonaceous shale and coal are common. The upper part (as thick as 533 m) contains reddish-weathering calcareous mudrock that contains scattered lenticular bodies of fine- to medium-grained calcareous sandstone. Fossil plant debris is common in mudrock of the lower and middle parts of the Ghazij, and bivalves and gastropods are common in the middle part; the upper part of the Ghazij is usually unfossiliferous. This three-fold division of the Ghazij is less distinct in the Johan area. Here, the upper part of the formation is clearly identifiable, but rocks below it are poorly exposed and assigning a stratigraphic level that separates the middle and lower parts of the formation is problematic. Below the upper part of the formation is a thick sequence of greenish-gray calcareous mudrock that contains locally abundant plant debris and isolated bodies of brown-weathering sandstone. Rare carbonaceous shale and even rarer coal are present in the upper part of this sequence, and this interval of the formation might correspond to the middle part of the Ghazji exposed in areas to the north. We propose that, in the Johan area, those rocks below the upper part of the formation be referred to as the main body of the Ghazij (for example, main-body Ghazij). Underlying the Ghazij are the carbonate rocks of the Paleocene Dungan Formation (or its equivalent), and overlying the Ghazij are the mostly carbonate rocks of the Eocene Kirthar Formation (or its equivalent). Both contacts can be conformable or unconformable. All of the pre-Neogene rocks in Balochistan are greatly deformed by the collision of India and Asia. The Ghazij is especially susceptible to regional compressional tectonics because it contains a large amount of shale and is sandwiched between two thick carbonate units. As a result, bedding-plane faults and isoclinal folds are common. As part of our study of the Ghazij Formation, five stratigraphic sections were measured: one near Pir Ismail Ziarat, one in the Sor Range, two in the vicinity of Mach, and one near Johan. Each area's section is published separately.

Balochistan↗
USGS1994

Report on drilling activities in the Thar Desert, Sindh Province, Pakistan

Coal test drilling in the Thar Desert of southeast Pakistan was conducted as part of the Coal Exploration and Assessment Program (COALREAP) involving the United States Agency for International Development (USAID), the Geological Survey of Pakistan (GSP), and the U.S. Geological Survey. Drilling was performed in the Thar Desert, or Great Indian Desert, approximately 175 km northeast of Karachi. Twenty five exploration holes were drilled between January 1992 and May 1994. Drill core was described by geologists of the Pakistan Geological Survey and coal samples were analyzed in both the United States and Pakistan. U.S. Geological Survey geologists offered technical assistance, trained GSP personnel, and managed the drilling program according to an agreement with USAID under the Energy Planning and Development Project. Drilling was performed by the Geological Survey of Pakistan. During drilling, the first 50 m was rotary drilled and cuttings collected every 2 m for examination. Average depth for all coal beds is 214 m with a total average thickness of 10 m of coal per drill hole. Core was described, boxed, and stored at the Geological Survey of Pakistan core library at Sonda, near Hyderabad. Approximately 6,412 m of Paleocene to Eocene rock was drilled of which 3,990 m was cored and 1,113 m was rotary drilled. There was 1,309 m of core loss. Geophysical logging of each drill hole permitted detailed thicknesses of coal to be determined. Analysis of the coal indicated a rank of lignite B with an as-received heating value over 5,000 Btu. This report presents data collected at the drill sites and should be used in conjunction with the published interpretive report (Fassett and Durrani, 1994) and the USGS Open-File Report 94-167, which contains analysis of the coal samples. Tables provide quick reference to numeric data and results. Detailed index maps and specific data, for each drill hole are included. This report covers drill holes TP-5 to TP-31. Drill holes TP-16, 17, 21, 26, 27, and 29 were planned but not drilled due to time restraints and (or) a determination that those drill sites were not needed to effectively delineate the coal deposit. The basic data for drill holes TP-1 through TP-4 are included in SanFilipo and others, 1994 however, some data for these drill holes are included for consistency.

Sindh Province↗
USGS1994

Tonsteins and clay-rich layers in coal-bearing intervals of the Eocene Manning formation, east-central Texas

Six samples from clay-rich intervals in the coal-bearing upper part of the Eocene Manning Formation were analyzed by scanning-electron microscopy and energy-dispersive X-ray fluorescence to determine the origin of minerals in the samples. Two samples were from surface-mine exposures of the 3500 coal bed near Bryan, Texas, and the remaining samples were from an exposure of a correlative interval at the Lake Somerville spillway about 60 km (37 mi) southwest of Bryan. Preliminary data suggest that both a 2-cm-thick (0.75-in) claystone from the upper part of the 3500 bed and the upper part of an 11-cm-thick (4.25-in) mudstone from the floor of the lower coal bed at the spillway were derived from volcanic ash falls. Both clay layers identified as possible tonsteins are composed of kaolinite and accessory quartz, euhedral to subhedral zircon, feldspars, and Ca-Al phosphates (crandallite?). Both alkali and plagioclase feldspars are observed in the two samples, but K-feldspar predominates in the upper clay layer of the 3500 bed, and plagioclase, with accessory Ti-bearing biotite, predominates in the sample from the floor of the spillway. These compositional differences suggest two separate volcanic ash falls. The other sampled clay layers contain rounded to subrounded zircons and feldspars in a mixed-layer clay groundmass, which suggests detrital rather than ash-fall origins.

Texas↗
USGS1993

A preliminary review of coal exploration activities conducted by the government of Armenia and the coal resource potential of Armenia

A coal resource assessment team from the U.S. Geological Survey (USGS), in cooperation with the Armenian Department of Underground Resources (DUR) and elements of the Ministry of Energy and Fuel, has completed an initial visit to Armenia under the auspices of the U.S. Agency for International Development JUSAID). The visit included discussions of the coal resources, identification of problems associated with on-going exploration and development activities, and field visits to selected solid fuel areas. The USGS team will return in November with a draft of the final report for discussion of conclusions and recommendations with Armenian counterparts, representatives of USAID, and the American Embassy. The final report, which will contain tabulated coal-sample analytical results and detailed recommendations, will be submitted to the USAID by the end of December 1993. Preliminary conclusions are that: 1) Armenia has usable deposits of coal that could form a viable, though relatively small, component of Armenia's energy budget; 2) on-going exploration and development activities must be augmented and expedited to increase understanding of the coal resource potential and subsequent utilization; 3) deficiencies in supplies (primarily fuel) and equipment (replacement of aging parts and units) have greatly reduced the gathering of necessary resource data; and 4) training of Armenian counterparts in conducting and managing coal exploration activities is desirable.

Open-File Report↗
USGS1991

Regional characterization and resource evaluation of Paleocene and Eocene coal-bearing rocks in Pakistan

Field work drilling, and other related studies carried out from 1985 to 1988 to assess the quantity and quality of the coal resources of southern Sindh. Sixty-eight holes drilled in the Lakhra/Jherruck, Thatta, and Indus East coal fields indicate that presently known and mined coal fields in southern Sindh are not isolated coal occurrences. Rather, much of southern Sindh, including the Thar Desert, is underlain by strata that contain coal beds. More than 400 core and mine samples were collected for proximate and ultimate analysis and determination of major, minor and trace elements; also, lithologie logs were prepared from description of rock cuttings and core. Original coal resources of 1,080 million tones have been estimated for 7 out of 9 coal zones in parts of the Lakhra area, where coal-bed thicknesses range from a few centimeters to 5 m. In the Sonda/Jherruk area, 3,700 million tones of coal have been identified, the thickest coal bed intercepted being 6.3 meters. The apparent rank of the coal in these fields ranges from lignite A to sub-bituminous C. Averaged analytical results on an as received basis indicate the coal beds contain 28.4 % moisture, 18,3 % ash, 4.7 % sulfur, 25,2 % fixed carbon, 27.9 % volatile matter, and 33.1% oxygen. Average calorific value for Lakhra coal samples is about 3,660 Kcal/kg, whereas that of Sonda/Jherruk samples is about 3,870 Kcal/kg. Geophysical logs were obtained for the drill holes, and cores and rock cuttings are available from the GSP for further study and reference. The second phase of the project began in 1987 with surface exploration in the Salt Range coal field of Punjab Province, the Sor Range and Khost-Sharig-Harnai coal fields of Baluchistan, and the Makarwal and Cherat coal fields of NWFP. These are briefly discussed here.

Geological Bulletin, University of Peshawar↗
USGS1990

Chemical and physical characteristics of coal and carbonaceous shale samples from the Salt Range coal field, Punjab Province, Pakistan

Sixty coal and carbonaceous shale samples collected from the Paleocene Patala Formation in the Salt Range coal field, Punjab Province, Pakistan, were analyzed to examine the relationships between coal bed chemical and physical characteristics and depositional environments. Results of proximate and ultimate analyses, reported on an as received basis, indicate that coal beds have an average ash yield of 24.23 percent, average sulfur content of 5.32 percent, average pyritic sulfur content of 4.07 percent, and average calorific value of 8943 Btu (4972 kcal/kg). Thirty five coal samples, analyzed on a whole coal, dry basis for selected trace elements and oxides, have anomalously high average concentrations of Ti, at O.3& percent; Zr, at 382 ppm; and Se, at 11.4 ppm, compared to world wide averages for these elements in coal. Some positive correlation coefficients, significant at a 0.01 level, are those between total sulfur and As, pyritic sulfur and As, total sulfur and sample location, organic sulfur and Se, calorific value (Btu) and sample location, and coal bed thickness and Se. Calorific values -for the samples, calculated on a moist, mineral matter free basis, indicate that the apparent rank of the coal is high volatile C bituminous. Variations observed in the chemical and physical characteristics of the coal beds may be related to depositional environments. Total ash yields and concentrations of Se and organic sulfur increase toward more landward depositional environments and may be related to an increase of fluvial influence on peat deposition. Variations in pyritic sulfur concentrations may be related to post-peat pyrite filled burrows commonly observed in the upper part of the coal bed. The thickest coal beds that have the lowest ash content, and highest calorific values, formed from peats deposited in back barrier, tidal flat environments of the central and western parts of the coal field. The reasons for correlations between Se and coal bed thickness and Se and ash content are not clear and may be a product of averaging.

Punjab Province↗
USGS1989

Depositional aspects and a guide to Paleocene coal-bearing sequences, Powder River Basin

The Paleocene coal-bearing sequences in the northern Powder River Basin are contained in the Tongue River Member of the Fort Union Formation and include anomalously thick (54 m) subbituminous coals. These thick coals have been the target of exploration and development for the past few decades. For the past decade, these coals have also been the object of depositional modeling studies [Law, 1976; Galloway, 1979; Flores, 1981, 1983, 1986; Ethridge and others, 1981; Ayers and Kaiser, 1984; Warwick, 1985; Ayers, 1986; Moore, 1986; Warwick and Stanton, 1988]. Intensive modeling of these coals has resulted in two major schools of thought. Firstly, Galloway [1979], Flores [1981, 1983, 1986], Ethridge and others [1981], Warwick [1985], Moore [1986], and Warwick and Stanton [1988] believe that the coals formed from peat that accumulated in swamps of fluvial systems. The fluvial systems are interpreted as a basin axis trunktributary complex that drained to the north-northeast into the Williston Basin. Secondly, Ayers and Kaiser [1984] and Ayers [1986] believe that the coals formed from peat swamps of deltaic systems. These deltas are envisioned to have prograded east to west from the Black Hills and infilled Lebo lake that was centrally located along the basin axis. In order to explain the low ash content of the thick coals, Flores [1981] proposed that they are formed as domed peats, similar in geomorphology to swamps associated with the modern fluvial systems in Borneo as described by Anderson [1964]. Ethridge and others [1981] suggested that these fluvial-related swamps are platforms well above drainage systems and are fed by ground water that is recharged from surrounding highlands. Warwick [1985], Warwick and Stanton [1988], Satchell [1984], and Pocknall and Flores [1987] confirmed the domed peat hypothesis by investigating the petrology and palynology of the thick coals. The purpose of this paper is to provide a guide to the depositional aspects of the thick coals in the Tongue River Member of the Fort Union Formation and, because of the biases of the field trip leaders, it elaborates on the fluvial origin of the swamps in which the thick coals formed. Case histories of these thick coals and associated sediments in the Gillette, Powder River, and Kaycee-Linch areas of Wyoming and in the Decker-Tongue River area of Montana (fig. 1) are highlighted on this field trip.

Montana, Wyoming↗