Search USGSSearch

Geology topics

Paul Lamothe

Publications and source records attributed to Paul Lamothe.

6 recordsLinked to original sources

Trace-metal concentrations in African dust: Effects of long-distance transport and implications for human health

The Sahara and Sahel lose billions of tons of eroded mineral soils annually to the Americas and Caribbean, Europe and Asia via atmospheric transport. African dust was collected from a dust source region (Mali, West Africa) and from downwind sites in the Caribbean [Trinidad-Tobago (TT) and U.S. Virgin Islands (VI)] and analysed for 32 trace-elements. Elemental composition of African dust samples was similar to that of average upper continental crust (UCC), with some enrichment or depletion of specific trace-elements. Pb enrichment was observed only in dust and dry deposition samples from the source region and was most likely from local use of leaded gasoline. Dust particles transported long-distances (VI and TT) exhibited increased enrichment of Mo and minor depletion of other elements relative to source region samples. This suggests that processes occurring during long-distance transport of dust produce enrichment/depletion of specific elements. Bioaccessibility of trace-metals in samples was tested in simulated human fluids (gastric and lung) and was found to be greater in downwind than source region samples, for some metals (e.g., As). The large surface to volume ratio of the dust particles (<2.5 &micro;m) at downwind sites may be a factor.

Bamako, Emetteur Kati, Flagstaff Hill, St. Croix,

Description and Analytical Results for Deposited Dust Samples from a Two-Year Monitoring Program Near Deer Trail, Colorado, USA, 2006-2007

Biosolids reclaimed from municipal wastewater have been applied since 1993 on nonirrigated farmland and rangeland east of Deer Trail, Colo., by Metro Wastewater Reclamation District of Denver. The U.S. Geological Survey has monitored ground water at this site since 1993, and began monitoring the biosolids, soils, and stream sediments in 1999. To investigate the possible effects of airborne dust blowing from the application fields, passive dust samplers were deployed in 2006 and 2007. These samplers measured the quantity and composition of dust being deposited downwind of a farmed field where biosolids had been applied, compared to a farmed field upwind of the application area. The dust-deposition rates and dust compositions measured at the two study sites are consistent with rates and compositions measured elsewhere in Utah, Nevada, and California using the same methods and equipment. Higher deposition rates were measured at the biosolids site compared to the control site during 2006. Higher deposition rates at both sites appear to be associated with episodes of cultivation and harvest during dry periods. No consistent differences in elements likely to be associated with biosolids disposal were detected between the sites. However, the contents of copper, lead, and zinc in the dust samples are generally much higher than average values of these elements in crustal rocks and sediments. Such values for dust samples are consistent with measurements on modern dust samples from southern Nevada and California and probably reflect inputs from regional urban and manufacturing activities.

Open-File Report

Aeolian dust in Colorado Plateau soils: Nutrient inputs and recent change in source

Aeolian dust (windblown silt and clay) is an important component in arid-land ecosystems because it may contribute to soil formation and furnish essential nutrients. Few geologic surfaces, however, have been characterized with respect to dust-accumulation history and resultant nutrient enrichment. We have developed a combination of methods to identify the presence of aeolian dust in arid regions and to evaluate the roles of this dust in ecosystem processes. Unconsolidated sandy sediment on isolated surfaces in the Canyonlands region of the Colorado Plateau differs greatly in mineralogical and chemical composition from associated bedrock, mainly aeolian sandstone. Detrital magnetite in the surficial deposits produces moderately high values of magnetic susceptibility, but magnetite is absent in nearby bedrock. A component of the surficial deposits must be aeolian to account for the abundance of magnetite, which formed originally in far-distant igneous rocks. Particle-size analysis suggests that the aeolian dust component is typically as much as 20–30%. Dust inputs have enriched the sediments in many elements, including P, Mg, Na, K, and Mo, as well as Ca, at sites where bedrock lacks calcite cement. Soil-surface biologic crusts are effective dust traps that apparently record a change in dust sources over the past several decades. Some of the recently fallen dust may result from human disturbance of land surfaces that are far from the Canyonlands, such as the Mojave Desert. Some land-use practices in the study area have the potential to deplete soil fertility by means of wind-erosion removal of aeolian silt. Many studies have addressed the presence of aeolian dust in soils and surficial deposits in deserts to provide important geologic and ecologic information bearing on landscape dynamics (1–16). From this body of work, we have improved understanding about: ( i ) current and past sources and flux of dust, hence changing conditions of dust emission; ( ii ) the genesis of desert soils; ( iii ) the influences of aeolian silt and clay on water-infiltration rates in soil; ( iv ) the evolution of desert surfaces (such as desert pavement) relevant to surface stability, as well as the distribution of surface and subsurface water; and ( v ) interrelations among aeolian dust, distribution of plants and soil crust, rain-water runoff, and productivity. Nevertheless, we lack fundamental knowledge about the accumulation history of aeolian dust on most landscapes and about how to discriminate between contributions from parent material and aeolian dust to the biotic system. Although many different methods provide clear evidence for aeolian input into soils (4, 6, 8, 9, 11, 13, 17, 18), ecosystem studies would benefit from rapid assessment of aeolian components in soils. Here we demonstrate that magnetic methods, which characterize the type and distribution of iron oxide minerals, can be applied to detect the presence of aeolian dust in young surficial sediments and soils over large arid-land areas. The magnetic results, combined with geochemical and textural analyses, form a basis for understanding the influence of fine-grained aeolian inputs on soil fertility of the central Colorado Plateau, Utah.

Utah

Environmental studies of the World Trade Center area after the September 11, 2001 attack

This web site describes the results of an interdisciplinary environmental characterization of the World Trade Center (WTC) area after September 11, 2001. Information presented in this site was first made available to the World Trade Center emergency response teams on September 18, 2001 (Thermal hot spot information), and September 27, 2001 (maps and compositional results). The Airborne Visible / Infrared Imaging Spectrometer (AVIRIS), a hyperspectral remote sensing instrument, was flown by JPL/NASA over the World Trade Center (WTC) area on September 16, 18, 22, and 23, 2001 ( Link to the AVIRIS JPL data facility) . A 2-person USGS crew collected samples of dusts and airfall debris from more than 35 localities within a 1-km radius of the World trade Center site on the evenings of September 17 and 18, 2001. Two samples were collected of indoor locations that were presumably not affected by rainfall (there was a rainstorm on September 14). Two samples of material coating a steel beam in the WTC debris were also collected. The USGS ground crew also carried out on-the-ground reflectance spectroscopy measurements during daylight hours to field calibrate AVIRIS remote sensing data. Radiance calibration and rectification of the AVIRIS data were done at JPL/NASA. Surface reflectance calibration, spectral mapping, and interpretation were done at the USGS Imaging Spectroscopy Lab in Denver. The dust/debris and beam-insulation samples were analyzed for a variety of mineralogical and chemical parameters using Reflectance Spectroscopy (RS), Scanning Electron Microscopy (SEM), X-Ray Diffraction (XRD), chemical analysis, and chemical leach test techniques in U.S. Geological Survey laboratories in Denver, Colorado.

New York

Results of chemical and stable isotopic analyses of water samples collected in the Patagonia Mountains, southern Arizona

Water samples were collected in the Patagonia Mountains in February, 1997. Most of the samples were collected from portals of abandoned mines, or from stream drainages immediately downstream from abandoned mines. Most of the samples have low pH (<4) and high total dissolved solids (> 1000 mg/L). Anion composition of the water samples is dominated by sulfate, while cation compositions range from calcium-dominated to mixed calcium-magnesium or calcium-sodium-dominated waters. Metals such as iron, manganese, copper, zinc, and aluminum contribute a significant portion (>10%) of the cation content to the water samples. Because of the low pH?s, protons contribute up to several percent of the cation character of the waters in some of the samples. The data are presented in tabular and graphical formats, with descriptions of data quality and brief descriptions of results.

Open-File Report