Search USGS⌕ Search

Geology topics

P. S. Powers

Publications and source records attributed to P. S. Powers.

13 recordsLinked to original sources

Seasonal movement of the Slumgullion landslide determined from global positioning system surveys and field instrumentation, July 1998-March 2002

Measurements of landslide movement made by global positioning system surveys and extensometers over a 3.5-year period show that the Slumgullion landslide in the San Juan Mountains of southwest Colorado moved throughout the monitoring period, but that daily velocities varied on a seasonal basis. Landslide velocities peaked in the early spring and summer in response to snowmelt and summer thunderstorms, respectively. Velocities were slowest in mid-winter when air and soil temperatures were coldest and precipitation was generally low and/or in the form of snow with a low water content. We hypothesize that the seasonal variability in velocities is due to ground-water levels and corresponding pore pressures that decrease when surface water is unavailable or cannot infiltrate frozen landslide material, and increase when surface water from melting snow or rainfall infiltrates unfrozen landslide material. We also suggest that patches of bouldery debris and fractures (created by continuous movement of the landslide) are conduits through which surface water can infiltrate, regardless of the frozen or unfrozen state of the landslide matrix material. Therefore, the availability of surface water is more important than landslide temperature in controlling the rate of landslide movement. This hypothesis is supported by field instrumentation data that show (1) landslide velocities coinciding with precipitation amounts regardless of the depth of freezing of landslide material, (2) spring and annual landslide velocities that were greatest when the depth of freezing was also the greatest, and (3) a rapid (several weeks or less) velocity and pore pressure response to rainfall. The persistent, but seasonally variable movement of the landslide, fits the bathtub model for landslide movement described by Baum and Reid [Baum, R.L., Reid, M.E., 2000. Ground water isolation by low-permeability clays in landslide shear zones. In: Bromhead, E.N., Dixon, N., Ibsen, M.-L. (Eds.), Landslides in Research, Theory and Practice. Proc. 8th Int. Symp. on Landslides, Cardiff, Wales, vol. 1, 139-144]. In their model, the landslide is isolated both mechanically and hydrologically from adjacent materials by low permeability clays. These clays cause the landslide to retain water. Our data support this model by suggesting that pore pressures at the basal landslide surface are always adequate to maintain landslide movement and that any infiltration of water at the surface of the landslide is adequate to rapidly increase landslide velocity. ?? 2002 Elsevier Science B.V. All rights reserved.

Engineering Geology↗

Fire-related hyperconcentrated and debris flows on Storm King Mountain, Glenwood Springs, Colorado, USA

The South Canyon Fire of July 1994 burned 800 ha of vegetation on Storm King Mountain near Glenwood Springs, Colorado, USA. On the night of 1 September 1994, in response to torrential rains, debris flows inundated seven areas along a 5-km length of interstate Highway 70. Mapping from aerial photographs, along with field observations and measurements, shows that the September rainstorm eroded unconsolidated, burned surficial soil from the hillsides, flushed dry-ravel deposits from the tributary channels, and transported loose, large material from the main channels. The hyperconcentrated flows and debris flows inundated 14 ha of Interstate Highway 70 with 70000 m3 of material. Although the burned area was seeded in November 1994, the potential for continuing debris-flow activity remains. Incision and entrainment of channel alluvium, as well as erosion of loose material from the hillslopes could result in future debris- and hyperconcentrated-flow activity.The South Canyon Fire of July 1994 burned 800 ha of vegetation on Storm King Mountain near Glenwood Springs, Colorado, USA. On the night of 1 September 1994, in response to torrential rains, debris flows inundated seven areas along a 5-km length of Interstate Highway 70. Mapping from aerial photographs, along with field observations and measurements, shows that the September rainstorm eroded unconsolidated, burned surficial soil from the hillsides, flushed dry-ravel deposits from the tributary channels, and transported loose, large material from the main channels. The hyperconcentrated flows and debris flows inundated 14 ha of Interstate Highway 70 with 70000 m3 of material. Although the burned area was seeded in November 1994, the potential for continuing debris-flow activity remains. Incision and entrainment of channel alluvium, as well as erosion of loose material from the hillslopes could result in future debris- and hyperconcentrated-flow activity.

Environmental Geology↗

Real-time monitoring of bluff stability at Woodway, Washington, USA

On January 15, 1997, a landslide of approximately 100,000-m3 from a coastal bluff swept five cars of a freight train into Puget Sound at Woodway, Washington, USA, 25 km north of downtown Seattle. The landslide resulted from failure of a sequence of dense sands and hard silts of glacial and non-glacial origin, including the Lawton Clay, a hard, jointed clayey silt that rarely fails in natural slopes. Joints controlled ground-water seepage through the silt and break-up of the landslide mass. During September of 1997, the US Geological Survey began measuring rainfall, ground-water pressures, and slope movement at the bluff where the landslide occurred. Data are collected every 15 minutes and updated hourly on the World-Wide-Web. Pore pressures observed from September 1997 to February 1998 generally were low and pressures near the bluff face, in the upper few meters of the hard clayey silt, increased gradually.

Conference Paper↗

A digital photogrammetric method for measuring horizontal surficial movements on the slumgullion earthflow, Hinsdale county, Colorado

The traditional approach to making aerial photographic measurements uses analog or analytic photogrammetric equipment. We have developed a digital method for making measurements from aerial photographs which uses geographic information system (GIS) software, and primarily DOS-based personal computers. This method, which is based on the concept that a direct visual comparison can be made between images derived from two sets of aerial photographs taken at different times, was applied to the surface of the active portion of the Slumgullion earthflow in Colorado to determine horizontal displacement vectors from the movements of visually identifiable objects, such as trees and large rocks. Using this method, more of the slide surface can be mapped in a shorter period of time than using the standard photogrammetric approach. More than 800 horizontal displacement vectors were determined on the active earthflow surface using images produced by our digital photogrammetric technique and 1985 (1:12,000-scale) and 1990 (1:6,000-scale) aerial photographs. The resulting displacement field shows, with a 2-m measurement error (??? 10%), that the fastest moving portion of the landslide underwent 15-29 m of horizontal displacement between 1985 and 1990. Copyright ?? 1996 Elsevier Science Ltd.

Computers & Geosciences↗