Search USGS⌕ Search

Geology topics

Nancy A. Wright

Publications and source records attributed to Nancy A. Wright.

11 recordsLinked to original sources

Analysis of the world distribution of metal-rich subsea manganese nodules

Publicly available data on the composition of subsea manganese nodules extend previous reports of differences in average metal contents from ocean to ocean and of variations related to latitude and depth. Pacific Ocean nodules have the highest average manganese, nickel, and copper contents, and Atlantic Ocean nodules have the highest average iron content. The average manganese, nickel, and copper contents generally increase toward the equator in both hemispheres, and iron content generally decreases. The variation of metal content with water depth is not linear; instead, there appears to be a threshold depth of about 2,900 to 3,000 m, above which combined nickel and copper contents are generally less than 1 percent and below which cobalt content is generally less than about 0.6 percent. The composition of the nodules varies widely, but three rarely overlapping types that are of possible economic interest can be recognized. (1) Nodules containing more than about 1 percent combined nickel and copper only exceptionally contain more than 0.5 percent cobalt and 35 percent manganese. (2) Nodules containing more than 0.5 percent cobalt rarely contain more than 1 percent combined nickel and copper and 35 percent manganese. (3) Nodules containing more than 35 percent manganese only exceptionally contain more than 0.5 percent cobalt, although they average nearly 1.1 percent combined nickel and copper. Current economic interest in nodule mining is focused on the Clarion-Clipperton zone in the northeastern equatorial Pacific Ocean, the largest known area in which nodules average 1.8 percent or more combined nickel and copper. Several other areas in which nodules are rich in these metals are found in the Pacific and Indian Oceans and may be viewed as targets for exploration. Nearly 60 chemical elements have been found in manganese nodules, many in concentrations far exceeding their crustal abundances. The amounts in which many minor elements are present vary with the amounts of principal metals present, but the three metal types described above do not include the maximum reported values for several other elements, such as titanium (8.9 percent), vanadium (0.5), zinc (9.0), and lead (0.75). It seems possible, therefore, that there may be other kinds of metal-rich types, some of which may have p6tential economic value. Many of the variations in nodule composition are in large part a function of variations in mineral composition, to which many factors contribute. Some of the regional variations can be broadly related to oceanic circulation, basin morphology, and depth, but a better understanding of ocean processes and regional oceanography and geology is needed to explain all the variations observed in the composition of manganese nodules.

Circular↗

Reconnaissance geochemistry of the Otter Creek Wilderness, Randolph and Tucker counties, West Virginia

The Wilderness Act (Public Law 88-577, September 3, 1964) and related acts require the U.S. Geological Survey and the U.S. Bureau of Mines to survey certain areas on Federal lands to determine their mineral resource potential. Results must be made available to the public and be submitted to the Administration and the Congress. This report presents the results of a geophysical survey of the Otter Creek Wilderness in the Monongahela National Forest, Randolph and Tucker counties, West Virginia, which was established as a wilderness by Public Law 93-622, January 3, 1975.

West Virginia↗

The Nature and Use of Copper Reserve and Resource Data

Copper reserve, resource, and production data can be combined to produce disaggregated resource estimates and trends and, when combined with demand forecasts, can be used to predict future exploration and development requirements. Reserve estimates are subject to uncertainties due mainly to incomplete exploration and rapidly changing economic conditions. United States' reserve estimates in the past have been low mainly because knowledge of the magnitude of very large porphyry-copper deposits has been incomplete. Present estimates are considerably more reliable because mining firms tend to drill out deposits fully before mining and to release their reserve estimates to the public. The sum of reserves and past production yields an estimate of the total ore, total metal contained in ore, and average grade of ore originally in each of the deposits known in the United States. For most deposits, estimates of total copper in ore are low relative to the total copper in mineralized rock, and many estimates are strongly affected by the economic behavior of mining firms. A better estimate of the real distribution of copper contained in deposits can be obtained by combining past production data with resource estimates. Copper resource data are disaggregated into categories that include resources in undeveloped deposits similar to those mined in the past, resources in mines closed because of unfavorable economic conditions, resources in deep deposits requiring high-cost mining methods, arid resources in deposits located in areas where environmental restrictions have contributed to delays in development. The largest resource is located in the five largest porphyry deposits. These deposits are now being mined but the resources are not included in the present mining plan. Resources in this last category will not contribute to supply until some future time when ores presently being mined are depleted. A high correlation exists between total copper contained in deposits and annual production from deposits. This correlation can be used to predict roughly the potential production from undeveloped deposits. Large deposits annually produce relatively less metal per ton of copper contained than do medium and small deposits. Dividing reserves by annual production gives a depletion date for each copper mine. The sum of annual production capacity of all mines not yet depleted at any year of interest gives the minimum production capacity for that year. A graph of minimum production capacity by year combined with curves representing potential capacity from undeveloped identified resources can be compared with various demand scenarios to yield a measure of copper requirements from new sources. Since 1950 reserves have been developed in the United States at a rate of about 1 million tons of copper per year. Since 1960 the number of deposits developed per 10-year period has greatly increased without a commensurate increase in tonnage of copper. This is in part due to the fact that recent exploration successes have been increasingly represented by smaller and (or) lower grade deposits containing less metal.

Professional Paper↗

Manganese nodule resources in the northeastern equatorial Pacific

Recent publication of maps at scale 1:1,000,000 of the northeastern equatorial Pacific region showing publicly available information on the nickel plus copper content of manganese nodules has made it possible to outline the prime area between the Clarion and Clipperton fracture zones which has been the focus of several recent scientific and commercial studies. The area, defined as that in which the nodules contain more than 1.8 percent nickel plus copper, is about 2o5 million km 2 . The available evidence suggests that about half of it contains nodules in concentration (reported in wet weight units) greater than 5 kg/m 2 and averaging 11.9 kg/m 2 . If we assume that 20 percent of the nodules in this area of 1.25 million km 2 are recoverable, its potential recoverable resources are about 2.1 billion dry metric tons of nodules averaging about 25 percent Mn, 1.3 percent Ni, 1.0 percent Cu, 0.22 percent Co, and 0.05 percent Mo—enough to support about 27 mining operations each producing an average of 75 million metric tons of nodules over their lifetimes. Estimates based on other plausible assumptions would be higher or lower, but of the same order of magnitude. Thus it seems probable that the magnitude of the potentially recoverable nodule resources of the Clarion-Clipperton prime area—the most promising now known—is at most in the range of several tens of the average-size operations postulated.

Book chapter↗

Map showing thickness of young bay mud, southern San Francisco Bay, California

Soft water-saturated estuarine deposits less than 10,000 years old underlie the southern part of San Francisco bay and the present and former marshlands that border the bay. Known locally as bay mud or as young bay mud, these deposits, and the estuarine environment that produces them, are of major importance in making decision on land use and development in the San Francisco Bay area. Knowledge of the distribution, thickness, and physical properties of young bay mud is critical to the feasibility, design, and maintenance of structures built on it. Fore this reason, numerous attempts have been made in the past to map or describe these characteristics (Mitchell, 1963; Goldman, 1969; McDonald and Nichols, 1974). The accompanying map of bay-mud thickness significantly revises part of an earlier compilation by Kahle and Goldman (1969) and includes new data from approximately 2400 boreholes, most of which have been drilled during the past 15 years. It also incorporates information on historic margins of San Francisco Bay and its tidal marshes (Nichols and Wright, 1971). Although this map was compelled mostly from data gathered during foundation investigations and construction projects, it is mostly from data gathered during foundation investigations and construction projects, it is not a substitute for such studies. Rather, the map provides regional information for land-use planning, seismic zonation, and design of foundation investigations.

California↗

Manganese nodule resources in the northeastern equatorial Pacific

Recent publication of maps at a scale of 1:1,000,000 of the northeastern equatorial Pacific region showing publicly available information on the nickel-plus-copper content of manganese nodules has made it possible to delineate the limits of the prime area between the Clarion and Clipperton fracture zones which has been the focus of several recent scientific and commercial studies. The area, defined as that in which the nodules contain more than 1.8 percent nickel plus copper, is about 2.5 million square kilometers in size, and about half of it is assumed to contain nodules in concentrations greater than 5 kg/m 2 and averaging 11.9 kg/m 2 . Assuming that 20 percent of the nodules in this area of 1.25 million square kilometers would be recoverable, its potentially recoverable resources are about 2.1 billion dry metric tons of nodules averaging about 25 percent Mn, 1.3 percent Ni, 1 percent Cu, 0.22 percent Co, and 0.05 percent Mo--enough to support about 27 mining operations each producing an average of 75 million metric tons of nodules over their lifetimes. Estimates based on other plausible assumptions would be higher or lower, but of the same order of magnitude. Thus it seems probable that the magnitude of the potentially recoverable nodule resources of the Clarion-Clipperton prime area--the most promising now known--is at most in the range of several tens of the average-size operations postulated.

Open-File Report↗