Geology topics

Michael T. Bland

Publications and source records attributed to Michael T. Bland.

At least 37 records · Page 2Linked to original sources

USGS2019

Dome formation on Ceres by sold-state flow analogous to terrestrial salt tectonics

The dwarf planet Ceres’s outer crust is a complex, heterogeneous mixture of ice, clathrates, salts and silicates. Numerous large domes on Ceres’s surface indicate a degree of geological activity. These domes have been attributed to cryovolcanism, but that is difficult to reconcile with Ceres’s small size and lack of long-lived heat sources. Here we alternatively propose that Ceres’s domes form by solid-state flow within the compositionally heterogeneous crust, a mechanism directly analogous to salt tectonics on Earth. We use numerical simulations to illustrate that differential loading of a crust with compositional heterogeneity on a scale of tens of kilometres can produce dome-like features of scale similar to those observed. The mechanism requires the presence of low-viscosity and low-density, possibly ice-rich, material in the upper 1–10 km of the subsurface. Such substantial regional heterogeneity in Ceres’s crustal composition is consistent with observations from the National Aeronautics and Space Administration’s Dawn mission. We conclude that deformation analogous to that in terrestrial salt tectonics is a viable alternative explanation for the observed surface morphologies, and is consistent with Ceres being both cold and geologically active.

Nature Geoscience↗

USGS2019

Bright carbonate surfaces on Ceres as remnants of salt-rich water fountains

Vinalia and Cerealia Faculae are bright and salt-rich localized areas in Occator crater on Ceres. The predominance of the near-infrared signature of sodium carbonate on these surfaces suggests their original material was a brine. Here we analyze Dawn Framing Camera's images and characterize the surfaces as composed of a central structure, either a possible depression (Vinalia) or a central dome (Cerealia), and a discontinuous mantling. We consider three materials enabling the ascent and formation of the faculae: ice ascent with sublimation and carbonate particle lofting, pure gas emission entraining carbonate particles, and brine extrusion. We find that a mechanism explaining the entire range of morphologies, topographies, as well as the common composition of the deposits is brine fountaining. This process consists of briny liquid extrusion, followed by flash freezing of carbonate and ice particles, particle fallback, and sublimation. Subsequent increase in briny liquid viscosity leads to doming. Dawn observations did not detect currently active water plumes, indicating the frequency of such extrusions is longer than years.

Icarus↗

USGS2019

The NASA Roadmap to Ocean Worlds

In this article, we summarize the work of the NASA Outer Planets Assessment Group (OPAG) Roadmaps to Ocean Worlds (ROW) group. The aim of this group is to assemble the scientific framework that will guide the exploration of ocean worlds, and to identify and prioritize science objectives for ocean worlds over the next several decades. The overarching goal of an Ocean Worlds exploration program as defined by ROW is to “identify ocean worlds, characterize their oceans, evaluate their habitability, search for life, and ultimately understand any life we find.” The ROW team supports the creation of an exploration program that studies the full spectrum of ocean worlds, that is, not just the exploration of known ocean worlds such as Europa but candidate ocean worlds such as Triton as well. The ROW team finds that the confirmed ocean worlds Enceladus, Titan, and Europa are the highest priority bodies to target in the near term to address ROW goals. Triton is the highest priority candidate ocean world to target in the near term. A major finding of this study is that, to map out a coherent Ocean Worlds Program, significant input is required from studies here on Earth; rigorous Research and Analysis studies are called for to enable some future ocean worlds missions to be thoughtfully planned and undertaken. A second finding is that progress needs to be made in the area of collaborations between Earth ocean scientists and extraterrestrial ocean scientists.

Astrobiology↗

USGS2018

Floor-fractured craters on Ceres and implications for interior processes

Several of the impact craters on Ceres have sets of fractures on their floors. These fractures appear similar to those found within a class of lunar craters referred to as floor-fractured craters (FFCs). We have cataloged the Ceres FFCs according to the classification scheme designed for the Moon. An analysis of the depth to diameter ratio for Ceres craters shows that, like lunar FFCs, the Ceres FFCs are anomalously shallow. Large (>50 km) Ceres FFCs are most consistent with Class 1 lunar FFCs, while smaller craters on Ceres are more consistent with Class 4 lunar FFCs. This suggests that Ceres FFCs may similarly be undergoing fracturing due to the intrusion of a low-density material below the craters. While on the Moon (and Mars) the intrusive material is hypothesized to be silicate magma, cryomagmatic intrusions are more likely responsible for the formation of the Ceres FFCs. However, new models suggest that at least some of the FFC fractures may have formed due to the solid-state flow of a low-viscosity and low-density material into the crater wall.

Journal of Geophysical Research↗

USGS2018

A new Enceladus global control network, image mosaic, and updated pointing kernels from Cassini's thirteen-year mission

NASA's Cassini spacecraft spent 13 years exploring the Saturn system, including 23 targeted flybys of the small, geologically active moon Enceladus. These flybys provided a wealth of image data from Cassini's Imaging Science Subsystem. To improve the usability of the Enceladus data set, we created a new, global photogrammetric control network for Enceladus that enabled compilation of a versatile cartographic package to support geologic mapping and other investigations. The network used 586 images in four image filters with a pixel scale generally between 50 and 500 m per pixel and a phase angle less than 120° and consisted of 10,362 tie points and 173,704 individual image measures, averaging nearly 17 measures per tie point. Least squares bundle adjustment resulted in a root‐mean‐square residual of 0.45 pixel, corresponding to root‐mean‐square ground point uncertainties of 66, 51, and 46 m in latitude, longitude, and radius, respectively. Using our geodetic control network, we created new global image mosaics, coregistered flyby mosaics to support geologic mapping, and updated pointing kernels for every image used in the solution. These products, including the updated pointing kernels, are available to the community through NASA's Planetary Data System Imaging Annex. The bundle adjustment solution also yielded independently determined shape information, resulting in radii within the stated uncertainty of International Astronomical Union values. The challenges of the data set, and the technical methodology described here are applicable to bodies imaged during multiple flybys with variable viewing and illumination geometry, including other midsized satellites of Saturn, and the Europa Clipper mission.

Earth and Space Science↗

USGS2018

Cryovolcanic rates on Ceres revealed by topography

Cryovolcanism, defined here as the extrusion of icy material from depth, may be an important planetary phenomenon in shaping the surfaces of many worlds in the outer Solar System and revealing their thermal histories 1 , 2 , 3 . However, the physics, chemistry and ubiquity of this geologic process remain poorly understood, especially in comparison to the better-studied silicate volcanism on the terrestrial planets. Ceres is the only plausibly cryovolcanic world to be orbited by a spacecraft up to now, making it the best opportunity to test the importance of cryovolcanism on bodies in the outer Solar System and compare its effects to silicate volcanism on terrestrial planets. Here, we analyse images from NASA’s Dawn mission 4 and use the finite element method to show that Ceres has experienced cryovolcanism throughout its geologic history, with an average cryomagma extrusion rate of ~10 4 m 3 yr −1 . This result shows that volcanic phenomena are important on Ceres, but orders of magnitude less so than on the terrestrial planets.

Nature Astronomy↗

USGS2018

Ceres internal structure from geophysical constraints

Thermal evolution modeling has yielded a variety of interior structures for Ceres, ranging from a modestly differentiated interior to more advanced evolution with a dry silicate core, a hydrated silicate mantle, and a volatile‐rich crust. Here we compute the mass and hydrostatic flattening from more than one hundred billion three‐layer density models for Ceres and describe the characteristics of the population of density structures that are consistent with the Dawn observations. We show that the mass and hydrostatic flattening constraints from Ceres indicate the presence of a high‐density core with greater than a 1σ probability, but provide little constraint on the density, allowing for core compositions that range from hydrous and/or anhydrous silicates to a mixture of metal and silicates. The crustal densities are consistent with surface observations of salts, water ice, carbonates, and ammoniated clays, which indicate hydrothermal alteration, partial fractionation, and the possible settling of heavy sulfide and metallic particles, which provide a potential process for increasing mass with depth.

Meteoritics and Planetary Science↗

USGS2018

Morphological indicators of a mascon beneath Ceres' largest crater, Kerwan

Gravity data of Ceres returned by the National Aeronautics and Space Administration's Dawn spacecraft is consistent with a lower density crust of variable thickness overlying a higher density mantle. Crustal thickness variations can affect the long‐term, postimpact modification of impact craters on Ceres. Here we show that the unusual morphology of the 280 km diameter crater Kerwan may result from viscous relaxation in an outer layer that thins substantially beneath the crater floor. We propose that such a structure is consistent with either impact‐induced uplift of the high‐density mantle beneath the crater or from volatile loss during the impact event. In either case, the subsurface structure inferred from the crater morphology is superisostatic, and the mass excess would result in a positive Bouguer anomaly beneath the crater, consistent with the highest‐degree gravity data from Dawn. Ceres joins the Moon, Mars, and Mercury in having basin‐associated gravity anomalies, although their origin may differ substantially.

Geophysical Research Letters↗

USGS2018

Viscous relaxation as a prerequisite for tectonic resurfacing on Ganymede: Insights from numerical models of lithospheric extension

Ganymede’s bright terrain formed during a near-global resurfacing event (or events) that produced both heavily tectonized and relatively smooth terrains. The mechanism(s) by which resurfacing occurred on Ganymede (e.g., cryovolcanic or tectonic), and the relationship between the older, dark and the younger, bright terrain are fundamental to understanding the geological evolution of the satellite. Using a two-dimensional numerical model of lithospheric extension that has previously been used to successfully simulate surface deformation consistent with grooved terrain morphologies, we investigate whether large-amplitude preexisting topography can be resurfaced (erased) by extension (i.e., tectonic resurfacing). Using synthetically produced initial topography, we show that when the total relief of the initial topography is larger than 25–50 m, periodic groove-like structures fail to form. Instead, extension is localized in a few individual, isolated troughs. These results pose a challenge to the tectonic resurfacing hypothesis. We further investigate the effects of preexisting topography by performing suites of simulations initialized with topography derived from digital terrain models of Ganymede’s surface. These include dark terrain, fresh (relatively deep) impact craters, smooth bright terrain, and a viscously relaxed impact crater. The simulations using dark terrain and fresh impact craters are consistent with our simulations using synthetic topography: periodic groove-like deformation fails to form. In contrast, when simulations were initialized with bright smooth terrain topography, groove-like deformation results from a wide variety of heat flow and surface temperature conditions. Similarly, when a viscously relaxed impact crater was used, groove-like structures were able to form during extension. These results suggest that tectonic resurfacing may require that the amplitude of the initial topography be reduced before extension begins. We emphasize that viscous relaxation may be the key to enabling tectonic resurfacing, as the heat fluxes associated with groove terrain formation are also capable of reducing crater topography through viscous relaxation. For long-wavelength topography (large craters) viscous relaxation is unavoidable. We propose that the resurfacing of Ganymede occurred through a combination of viscous relaxation, tectonic resurfacing, cryovolcanism and, at least in a few cases, band formation. Variations in heat flow and strain magnitudes across Ganymede likely produced the complex variety of terrain types currently observed.

Icarus↗

USGS2018

Relaxed impact craters on Ganymede: Regional variation and high heat flows

Viscously relaxed craters provide a window into the thermal history of Ganymede, a satellite with copious geologic signs of past high heat flows. Here we present measurements of relaxed craters in four regions for which suitable imaging exists: near Anshar Sulcus, Tiamat Sulcus, northern Marius Regio, and Ganymede's south pole. We describe a technique to measure apparent depth, or depth of the crater with respect to the surrounding terrain elevation. Measured relaxation states are compared with results from finite element modeling to constrain heat flow scenarios [see companion paper: Bland et al. (2017)]. The presence of numerous, substantially relaxed craters indicates high heat flows—in excess of 30–40 mW m −2 over 2 Gyr, with many small (<10 km in diameter) relaxed craters indicating even higher heat flows. Crater relaxation states are bimodal for some equatorial regions but not in the region studied near the south pole, which suggests regional variations in Ganymede's thermal history.

Icarus↗

USGS2018

Final Mimas and Enceladus atlases derived from Cassini-ISS images

The Imaging Science Subsystem (ISS) on-board Cassini took a few high-resolution images of the icy Saturnian satellites Mimas and Enceladus over the last seven years of the Cassini mission during non-targeted flybys. We used the new Mimas images to improve the existing semi-controlled mosaic of Mimas. A new controlled Enceladus mosaic was published recently (Bland et al., 2015; Bland et al. in prep.). Both new mosaics are the baseline for improved atlases of Mimas in three tiles with a map scale of 1:1,000,000 and Enceladus in 15 tiles with a map scale of 1:400,000. The nomenclature for both satellites was proposed by the Cassini-ISS team and approved by the IAU.

Planetary and Space Sciences↗

USGS2017

Evidence for the interior evolution of Ceres from geologic analysis of fractures

Ceres is the largest asteroid belt object, and the Dawn spacecraft observed Ceres since 2015. Dawn observed two morphologically distinct linear features on Ceres's surface: secondary crater chains and pit chains. Pit chains provide unique insights into Ceres's interior evolution. We interpret pit chains called the Samhain Catenae as the surface expression of subsurface fractures. Using the pit chains' spacings, we estimate that the localized thickness of Ceres's fractured, outer layer is approximately ≥58 km, at least ~14 km greater than the global average. We hypothesize that extensional stresses, induced by a region of upwelling material arising from convection/diapirism, formed the Samhain Catenae. We derive characteristics for this upwelling material, which can be used as constraints in future interior modeling studies. For example, its predicted location coincides with Hanami Planum, a high-elevation region with a negative residual gravity anomaly, which may be surficial evidence for this proposed region of upwelling material.

Geophysical Research Letters↗

USGS2017

Pitted terrains on (1) Ceres and implications for shallow subsurface volatile distribution

Prior to the arrival of the Dawn spacecraft at Ceres, the dwarf planet was anticipated to be ice-rich. Searches for morphological features related to ice have been ongoing during Dawn's mission at Ceres. Here we report the identification of pitted terrains associated with fresh Cerean impact craters. The Cerean pitted terrains exhibit strong morphological similarities to pitted materials previously identified on Mars (where ice is implicated in pit development) and Vesta (where the presence of ice is debated). We employ numerical models to investigate the formation of pitted materials on Ceres and discuss the relative importance of water ice and other volatiles in pit development there. We conclude that water ice likely plays an important role in pit development on Ceres. Similar pitted terrains may be common in the asteroid belt and may be of interest to future missions motivated by both astrobiology and in situ resource utilization.

Geophysical Research Letters↗

USGS2017

Geomorphological evidence for ground ice on dwarf planet Ceres

Five decades of observations of Ceres suggest that the dwarf planet has a composition similar to carbonaceous meteorites and may have an ice-rich outer shell protected by a silicate layer. NASA’s Dawn spacecraft has detected ubiquitous clays, carbonates and other products of aqueous alteration across the surface of Ceres, but surprisingly it has directly observed water ice in only a few areas. Here we use Dawn Framing Camera observations to analyse lobate morphologies on Ceres’ surface and we infer the presence of ice in the upper few kilometres of Ceres. We identify three distinct lobate morphologies that we interpret as surface flows: thick tongue-shaped, furrowed flows on steep slopes; thin, spatulate flows on shallow slopes; and cuspate sheeted flows that appear fluidized. The shapes and aspect ratios of these flows are different from those of dry landslides—including those on ice-poor Vesta—but are morphologically similar to ice-rich flows on other bodies, indicating the involvement of ice. Based on the geomorphology and poleward increase in prevalence of these flows, we suggest that the shallow subsurface of Ceres is comprised of mixtures of silicates and ice, and that ice is most abundant near the poles.

Nature Geoscience↗

USGS2017

The vanishing cryovolcanoes of Ceres

Ahuna Mons is a 4 km tall mountain on Ceres interpreted as a geologically young cryovolcanic dome. Other possible cryovolcanic features are more ambiguous, implying that cryovolcanism is only a recent phenomenon or that other cryovolcanic structures have been modified beyond easy identification. We test the hypothesis that Cerean cryovolcanic domes viscously relax, precluding ancient domes from recognition. We use numerical models to predict flow velocities of Ahuna Mons to be 10–500 m/Myr, depending upon assumptions about ice content, rheology, grain size, and thermal parameters. Slower flow rates in this range are sufficiently fast to induce extensive relaxation of cryovolcanic structures over 10 8 –10 9 years, but gradual enough for Ahuna Mons to remain identifiable today. Positive topographic features, including a tholus underlying Ahuna Mons, may represent relaxed cryovolcanic structures. A composition for Ahuna Mons of >40% ice explains the observed distribution of cryovolcanic structures because viscous relaxation renders old cryovolcanoes unrecognizable.

Geophysical Research Letters↗

USGS2017

The interior structure of Ceres as revealed by surface topography

Ceres, the largest body in the asteroid belt (940 km diameter), provides a unique opportunity to study the interior structure of a volatile-rich dwarf planet. Variations in a planetary body's subsurface rheology and density affect the rate of topographic relaxation. Preferential attenuation of long wavelength topography (≥150 km) on Ceres suggests that the viscosity of its crust decreases with increasing depth. We present finite element (FE) geodynamical simulations of Ceres to identify the internal structures and compositions that best reproduce its topography as observed by the NASA Dawn mission. We infer that Ceres has a mechanically strong crust with maximum effective viscosity ∼10 25 Pa s. Combined with density constraints, this rheology suggests a crustal composition of carbonates or phyllosilicates, water ice, and at least 30 volume percent (vol.%) low-density, high-strength phases most consistent with salt and/or clathrate hydrates. The inference of these crustal materials supports the past existence of a global ocean, consistent with the observed surface composition. Meanwhile, we infer that the uppermost ≥60 km of the silicate-rich mantle is mechanically weak with viscosity <10 21 Pa s, suggesting the presence of liquid pore fluids in this region and a low temperature history that avoided igneous differentiation due to late accretion or efficient heat loss through hydrothermal processes.

Earth and Planetary Science Letters↗

USGS2017

Viscous relaxation of Ganymede's impact craters: Constraints on heat flux

Measurement of crater depths in Ganymede’s dark terrain have revealed substantial numbers of unusually shallow craters indicative of viscous relaxation [see companion paper: Singer, K.N., Schenk, P. M., Bland, M.T., McKinnon, W.B., (2017). Relaxed impact craters on Ganymede: Regional variations and high heat flow. Icarus, submitted]. These viscously relaxed craters provide insight into the thermal history of the dark terrain: the rate of relaxation depends on the size of the crater and the thermal structure of the lithosphere. Here we use finite element simulations of crater relaxation to constrain the heat flux within the dark terrain when relaxation occurred. We show that the degree of viscous relaxation observed cannot be achieved through radiogenic heating alone, even if all of the relaxed craters are ancient and experienced the high radiogenic fluxes present early in the satellite’s history. For craters with diameter ≥ 10 km, heat fluxes of 40–50 mW m -2 − 2 "> can reproduce the observed crater depths, but only if the fluxes are sustained for ∼1 Gyr. These craters can also be explained by shorter-lived “heat pulses” with magnitudes of ∼100 mW m -2 − 2 "> and timescales of 10–100 Myr. At small crater diameters (4 km) the observed shallow depths are difficult to achieve even when heat fluxes as high as 150 mW m -2 − 2 "> are sustained for 1 Gyr. The extreme thermal conditions required to viscously relax small craters may indicate that mechanisms other than viscous relaxation, such as topographic degradation, are also in play at small crater diameters. The timing of the relaxation event(s) is poorly constrained due to the sparsity of adequate topographic information, though it likely occurred in Ganymede’s middle history (neither recently, nor shortly after satellite formation). The consistency between the timing and magnitude of the heat fluxes derived here and those inferred from other tectonic features suggests that a single event caused both Ganymede’s tectonic deformation and its crater relaxation. Future observations should permit more robust determination of the relative timing of the heating event that caused viscous relaxation.

Icarus↗

USGS2016

The missing large impact craters on Ceres

Asteroids provide fundamental clues to the formation and evolution of planetesimals. Collisional models based on the depletion of the primordial main belt of asteroids predict 10–15 craters >400   km should have formed on Ceres, the largest object between Mars and Jupiter, over the last 4.55   Gyr. Likewise, an extrapolation from the asteroid Vesta would require at least 6–7 such basins. However, Ceres’ surface appears devoid of impact craters >~280   km. Here, we show a significant depletion of cerean craters down to 100–150   km in diameter. The overall scarcity of recognizable large craters is incompatible with collisional models, even in the case of a late implantation of Ceres in the main belt, a possibility raised by the presence of ammoniated phyllosilicates. Our results indicate that a significant population of large craters has been obliterated, implying that long-wavelength topography viscously relaxed or that Ceres experienced protracted widespread resurfacing.

Nature Communications↗