Search USGSSearch

Geology topics

Michael P. Finn

Publications and source records attributed to Michael P. Finn.

At least 19 recordsLinked to original sources

Classifying physiographic regimes on terrain and hydrologic factors for adaptive generalization of stream networks

Automated generalization software must accommodate multi-scale representations of hydrographic networks across a variety of geographic landscapes, because scale-related hydrography differences are known to vary in different physical conditions. While generalization algorithms have been tailored to specific regions and landscape conditions by several researchers in recent years, the selection and characterization of regional conditions have not been formally defined nor statistically validated. This paper undertakes a systematic classification of landscape types in the conterminous United States to spatially subset the country into workable units, in preparation for systematic tailoring of generalization workflows that preserve hydrographic characteristics. The classification is based upon elevation, standard deviation of elevation, slope, runoff, drainage and bedrock density, soil and bedrock permeability, area of inland surface water, infiltration-excess of overland flow, and a base flow index. A seven class solution shows low misclassification rates except in areas of high landscape diversity such as the Appalachians, Rocky Mountains, and Western coastal regions.

International Journal of Cartography

The logic of selecting an appropriate map projection in a Decision Support System (DSS)

There are undeniable practical consequences to consider when choosing an appropriate map projection for a specific region. The surface of a globe covered by global, continental, and regional maps are so singular that each type distinctively affects the amount of distortion incurred during a projection transformation because of the an assortment of effects caused by distance, direction, scale , and area. A Decision Support System (DSS) for Map Projections of Small Scale Data was previously developed to help select an appropriate projection. This paper reports on a tutorial to accompany that DSS. The DSS poses questions interactively, allowing the user to decide on the parameters, which in turn determines the logic path to a solution. The objective of including a tutorial to accompany the DSS is achieved by visually representing the path of logic that is taken to a recommended map projection derived from the parameters the user selects. The tutorial informs the DSS user about the pedigree of the projection and provides a basic explanation of the specific projection design. This information is provided by informational pop-ups and other aids.

Book chapter

Map projections and the Internet

The field of map projections can be described as mathematical, static, and challenging. However, this description is evolving in concert with the development of the Internet. The Internet has enabled new outlets for software applications, learning, and interaction with and about map projections . This chapter examines specific ways in which the Internet has moved map projections from a relatively obscure paper-based setting to a more engaging and accessible online environment. After a brief overview of map projections, this chapter discusses four perspectives on how map projections have been integrated into the Internet. First, map projections and their role in web maps and mapping services is examined. Second, an overview of online atlases and the map projections chosen for their maps is presented. Third, new programming languages and code libraries that enable map projections to be included in mapping applications are reviewed. Fourth, the Internet has facilitated map projection education and research especially with the map reader’s comprehension and understanding of complex topics like map projection distortion is discussed.

Book chapter

TopoLens: Building a cyberGIS community data service for enhancing the usability of high-resolution National Topographic datasets

Geospatial data, often embedded with geographic references, are important to many application and science domains, and represent a major type of big data. The increased volume and diversity of geospatial data have caused serious usability issues for researchers in various scientific domains, which call for innovative cyberGIS solutions. To address these issues, this paper describes a cyberGIS community data service framework to facilitate geospatial big data access, processing, and sharing based on a hybrid supercomputer architecture. Through the collaboration between the CyberGIS Center at the University of Illinois at Urbana-Champaign (UIUC) and the U.S. Geological Survey (USGS), a community data service for accessing, customizing, and sharing digital elevation model (DEM) and its derived datasets from the 10-meter national elevation dataset, namely TopoLens, is created to demonstrate the workflow integration of geospatial big data sources, computation, analysis needed for customizing the original dataset for end user needs, and a friendly online user environment. TopoLens provides online access to precomputed and on-demand computed high-resolution elevation data by exploiting the ROGER supercomputer. The usability of this prototype service has been acknowledged in community evaluation.

Conference Paper

Shapes on a plane: Evaluating the impact of projection distortion on spatial binning

One method for working with large, dense sets of spatial point data is to aggregate the measure of the data into polygonal containers, such as political boundaries, or into regular spatial bins such as triangles, squares, or hexagons. When mapping these aggregations, the map projection must inevitably distort relationships. This distortion can impact the reader’s ability to compare count and density measures across the map. Spatial binning, particularly via hexagons, is becoming a popular technique for displaying aggregate measures of point data sets. Increasingly, we see questionable use of the technique without attendant discussion of its hazards. In this work, we discuss when and why spatial binning works and how mapmakers can better understand the limitations caused by distortion from projecting to the plane. We introduce equations for evaluating distortion’s impact on one common projection (Web Mercator) and discuss how the methods used generalize to other projections. While we focus on hexagonal binning, these same considerations affect spatial bins of any shape, and more generally, any analysis of geographic data performed in planar space.

Cartography and Geographic Information Science

Visualizing impact structures using high-resolution LiDAR-derived DEMs: A case study of two structures in Missouri

Evidence suggests that a crypto-explosive hypothesis and a meteorite impact hypothesis may be partly correct in explaining several anomalous geological features in the middle of the United States. We used a primary geographic information science (GIScience) technique of creating a digital elevation model (DEM) of two of these features that occur in Missouri. The DEMs were derived from airborne light detection and ranging, or LiDAR. Using these DEMs, we characterized the Crooked Creek structure in southern Crawford County and the Weaubleau structure in southeastern St. Clair County, Missouri. The mensuration and study of exposed and buried impact craters implies that the craters may have intrinsic dimensions which could only be produced by collision. The results show elevations varying between 276 and 348 m for Crooked Creek and between 220 and 290 m for Weaubleau structure. These new high- resolution DEMs are accurate enough to allow for precise measurements and better interpretations of geological structures, particularly jointing in the carbonate rocks, and they show greater definition of the central uplift area in the Weaubleau structure than publicly available DEMs.

Missouri

Implications of Web Mercator and its Use in Online Mapping

Online interactive maps have become a popular means of communicating with spatial data. In most online mapping systems, Web Mercator has become the dominant projection. While the Mercator projection has a long history of discussion about its inappropriateness for general-purpose mapping, particularly at the global scale, and seems to have been virtually phased out for general-purpose global-scale print maps, it has seen a resurgence in popularity in Web Mercator form. This article theorizes on how Web Mercator came to be widely used for online maps and what this might mean in terms of data display, technical aspects of map generation and distribution, design, and cognition of spatial patterns. The authors emphasize details of where the projection excels and where it does not, as well as some of its advantages and disadvantages for cartographic communication, and conclude with some research directions that may help to develop better solutions to the problem of projections for general-purpose, multi-scale Web mapping.

Cartographica: The International Journal for Geogr

Remote sensing of soil moisture using airborne hyperspectral data

Landscape assessment of soil moisture is critical to understanding the hydrological cycle at the regional scale and in broad-scale studies of biophysical processes affected by global climate changes in temperature and precipitation. Traditional efforts to measure soil moisture have been principally restricted to in situ measurements, so remote sensing techniques are often employed. Hyperspectral sensors with finer spatial resolution and narrow band widths may offer an alternative to traditional multispectral analysis of soil moisture, particularly in landscapes with high spatial heterogeneity. This preliminary research evaluates the ability of remotely sensed hyperspectral data to quantify soil moisture for the Little River Experimental Watershed (LREW), Georgia. An airborne hyperspectral instrument with a short-wavelength infrared (SWIR) sensor was flown in 2005 and 2007 and the results were correlated to in situ soil moisture values. A significant statistical correlation ( R 2 value above 0.7 for both sampling dates) for the hyperspectral instrument data and the soil moisture probe data at 5.08 cm (2 inches) was determined. While models for the 20.32 cm (8 inches) and 30.48 cm (12 inches) depths were tested, they were not able to estimate soil moisture to the same degree.

GIScience and Remote Sensing

Rejuvenating Pre-GPS era geophysical surveys using The National Map

Old geophysical surveys [pre–Global Positioning System (GPS)] stand as valuable, largely untapped sources of scientific data. If data from these surveys were in a format that had reasonable accuracy, availability, and ease of access, they could be more widely used. In this paper, a pre-GPS survey is integrated into a modern geographic database, in this case, The National Map (TNM). The ultimate goal is to improve the accuracy, precision, provenance, and ease of access of the geospatial components of archived geophysical data. An unique set of data sources was assembled for this purpose. A comparison of these different data sources indicates that more than 80% of stations were positioned on The National Map within 15 m (horizontal) and 2 m (vertical) of the GPS-derived coordinates for each station within the survey. Although online database coordinate accuracy continues to improve, these results imply that web databases have already matured to a point where it is possible to integrate pre-GPS era survey coordinate data with reasonable positional accuracy.

Missouri

A program for handling map projections of small-scale geospatial raster data

Scientists routinely accomplish small-scale geospatial modeling using raster datasets of global extent. Such use often requires the projection of global raster datasets onto a map or the reprojection from a given map projection associated with a dataset. The distortion characteristics of these projection transformations can have significant effects on modeling results. Distortions associated with the reprojection of global data are generally greater than distortions associated with reprojections of larger-scale, localized areas. The accuracy of areas in projected raster datasets of global extent is dependent on spatial resolution. To address these problems of projection and the associated resampling that accompanies it, methods for framing the transformation space, direct point-to-point transformations rather than gridded transformation spaces, a solution to the wrap-around problem, and an approach to alternative resampling methods are presented. The implementations of these methods are provided in an open-source software package called MapImage (or mapIMG , for short), which is designed to function on a variety of computer architectures.

Cartographic Perspectives

User's guide for mapIMG 3--Map image re-projection software package

Version 0.0 (1995), Dan Steinwand, U.S. Geological Survey (USGS)/Earth Resources Observation Systems (EROS) Data Center (EDC)--Version 0.0 was a command line version for UNIX that required four arguments: the input metadata, the output metadata, the input data file, and the output destination path. Version 1.0 (2003), Stephen Posch and Michael P. Finn, USGS/Mid-Continent Mapping Center (MCMC--Version 1.0 added a GUI interface that was built using the Qt library for cross platform development. Version 1.01 (2004), Jason Trent and Michael P. Finn, USGS/MCMC--Version 1.01 suggested bounds for the parameters of each projection. Support was added for larger input files, storage of the last used input and output folders, and for TIFF/ GeoTIFF input images. Version 2.0 (2005), Robert Buehler, Jason Trent, and Michael P. Finn, USGS/National Geospatial Technical Operations Center (NGTOC)--Version 2.0 added Resampling Methods (Mean, Mode, Min, Max, and Sum), updated the GUI design, and added the viewer/pre-viewer. The metadata style was changed to XML and was switched to a new naming convention. Version 3.0 (2009), David Mattli and Michael P. Finn, USGS/Center of Excellence for Geospatial Information Science (CEGIS)--Version 3.0 brings optimized resampling methods, an updated GUI, support for less than global datasets, UTM support and the whole codebase was ported to Qt4.

Open-File Report

Approximating tasseled cap values to evaluate brightness, greenness, and wetness for the Advanced Land Imager (ALI)

The Tasseled Cap transformation is a method of image band conversion to enhance spectral information. It primarily is used to detect vegetation using the derived brightness, greenness, and wetness bands. An approximation of Tasseled Cap values for the Advanced Land Imager was investigated and compared to the Landsat Thematic Mapper Tasseled Cap values. Despite sharing similar spectral, temporal, and spatial resolution, the two systems are not interchangeable with regard to Tasseled Cap matrices.

California;Colorado;Georgia;Missouri;West Virginia

Table Rock Lake Water-Clarity Assessment Using Landsat Thematic Mapper Satellite Data

Water quality of Table Rock Lake in southwestern Missouri is assessed using Landsat Thematic Mapper satellite data. A pilot study uses multidate satellite image scenes in conjunction with physical measurements of secchi disk transparency collected by the Lakes of Missouri Volunteer Program to construct a regression model used to estimate water clarity. The natural log of secchi disk transparency is the dependent variable in the regression and the independent variables are Thematic Mapper band 1 (blue) reflectance and a ratio of the band 1 and band 3 (red) reflectance. The regression model can be used to reliably predict water clarity anywhere within the lake. A pixel-level lake map of predicted water clarity or computed trophic state can be produced from the model output. Information derived from this model can be used by water-resource managers to assess water quality and evaluate effects of changes in the watershed on water quality.

Scientific Investigations Report

A 125 year history of topographic mapping and GIS in the U.S. Geological Survey 1884-2009, part 2: 1980-2009

The United States Geological Survey (USGS) entered the mainstream of developments in computer-assisted technology for mapping during the 1970s. The introduction by USGS of digital line graphs (DLGs), digital elevation models (DEMs), and land use data analysis (LUDA) nationwide land-cover data provided a base for the rapid expansion of the use of GIS in the 1980s. Whereas USGS had developed the topologically structured DLG data and the Geographic Information Retrieval and Analysis System (GIRAS) for land-cover data, the Map Overlay Statistical System (MOSS), a nontopologically structured GIS software package developed by Autometric, Inc., under contract to the U.S. Fish and Wildlife Service, dominated the use of GIS by federal agencies in the 1970s. Thus, USGS data was used in MOSS, but the topological structure, which later became a requirement for GIS vector datasets, was not used in early GIS applications. The introduction of Esri's ARC/INFO in 1982 changed that, and by the end of the 1980s, topological structure for vector data was essential, and ARC/INFO was the dominant GIS software package used by federal agencies.

ArcNews

EL68D Wasteway Watershed Land-Cover Generation

Classification of land cover from Landsat Enhanced Thematic Mapper Plus (ETM+) for the EL68D Wasteway Watershed in the State of Washington is documented. The procedures for classification include use of two ETM+ scenes in a simultaneous unsupervised classification process supported by extensive field data collection using Global Positioning System receivers and digital photos. The procedure resulted in a detailed classification at the individual crop species level.

Open-File Report

An interface between the Agricultural Non-Point Source (AGNPS) pollution model and the ERDAS Imagine Geographic Information System (GIS)

The U.S. Department of Agriculture developed the Agricultural Non-Point Source (AGNPS) pollution model. The AGNPS pollution model simulates the behavior of runoff, sediment, and nutrient transport from watersheds that have agriculture as their prime use. This model has been used extensively by scientists conducting hydrologic or water quality analyses using computer modeling in an attempt to further understand the complex problem of managing non-point sources of pollution in a watershed hydrology domain. A difficulty with AGNPS is creating and formatting all of the data necessary to execute the model to conduct landscape modeling and watershed analyses. A unique Windows-based program, the AGNPS Data Generator ( ADGen ), has been developed to simplify the task of preparing and creating the input for AGNPS through an interface with ERDAS Imagine (a Leica Geosystems product). Because of the complexity and quantity of the input required and the nature of the output text file produced by AGNPS, ADGen is a helpful tool for the researcher who is trying to analyze non-point source pollution.

Geographic Information Sciences

User's Guide for MapIMG 2: Map Image Re-projection Software Package

BACKGROUND Scientists routinely accomplish small-scale geospatial modeling in the raster domain, using high-resolution datasets for large parts of continents and low-resolution to high-resolution datasets for the entire globe. Direct implementation of point-to-point transformation with appropriate functions yields the variety of projections available in commercial software packages, but implementation with data other than points requires specific adaptation of the transformation equations or prior preparation of the data to allow the transformation to succeed. It seems that some of these packages use the U.S. Geological Survey's (USGS) General Cartographic Transformation Package (GCTP) or similar point transformations without adaptation to the specific characteristics of raster data (Usery and others, 2003a). Usery and others (2003b) compiled and tabulated the accuracy of categorical areas in projected raster datasets of global extent. Based on the shortcomings identified in these studies, geographers and applications programmers at the USGS expanded and evolved a USGS software package, MapIMG, for raster map projection transformation (Finn and Trent, 2004). Daniel R. Steinwand of Science Applications International Corporation, National Center for Earth Resources Observation and Science, originally developed MapIMG for the USGS, basing it on GCTP. Through previous and continuing efforts at the USGS' National Geospatial Technical Operations Center, this program has been transformed from an application based on command line input into a software package based on a graphical user interface for Windows, Linux, and other UNIX machines.

Open-File Report