Geology topics

Michael H. Trippi

Publications and source records attributed to Michael H. Trippi.

43 records · Page 3Linked to original sources

USGS2008

Thermal Maturity Patterns (CAI and %Ro) in Upper Ordovician and Devonian Rocks of the Appalachian Basin: A Major Revision of USGS Map I-917-E Using New Subsurface Collections

The conodont color alteration index (CAI) introduced by Epstein and others (1977) and Harris and others (1978) is an important criterion for estimating the thermal maturity of Ordovician to Mississippian rocks in the Appalachian basin. Consequently, the CAI isograd maps of Harris and others (1978) are commonly used by geologists to characterize the thermal and burial history of the Appalachian basin and to better understand the origin and distribution of oil and gas resources in the basin. The main objectives of our report are to present new CAI isograd maps for Ordovician and Devonian rocks in the Appalachian basin and to interpret the geologic and petroleum resource implications of these maps. The CAI isograd maps presented herein complement, and in some areas replace, the CAI-based isograd maps of Harris and others (1978) for the Appalachian basin. The CAI data presented in this report were derived almost entirely from subsurface samples, whereas the CAI data used by Harris and others (1978) were derived almost entirely from outcrop samples. Because of the different sampling methods, there is little geographic overlap of the two data sets. The new data set is mostly from the Allegheny Plateau structural province and most of the data set of Harris and others (1978) is from the Valley and Ridge structural province, east of the Allegheny structural front.

Scientific Investigations Map↗

USGS2007

In search of a Silurian Total Petroleum System in the Appalachian Basin of New York, Ohio, Pennsylvania, and West Virginia

This report provides an evaluation of the source rock potential of Silurian strata in the U.S. portion of the northern Appalachian Basin, using new TOC and RockEval data. The study area consists of all or parts of New York, Ohio, Pennsylvania, and West Virginia. The stratigraphic intervals that were sampled for this study are as follows: 1) the Lower Silurian Cabot Head Shale, Rochester Shale, and Rose Hill Formation; 2) the Lower and Upper Silurian McKenzie Limestone, Lockport Dolomite, and Eramosa Member of the Lockport Group; and 3) the Upper Silurian Wills Creek Formation, Tonoloway Limestone, Salina Group, and Bass Islands Dolomite. These Silurian stratigraphic intervals were chosen because they are cited in previous publications as potential source rocks, they are easily identified and relatively continuous across the basin, and they contain beds of dark gray to black shale and (or) black argillaceous limestone and dolomite.

Open-File Report↗

USGS2007

Coal quality and major, minor, and trace elements in the Powder River, Green River, and Williston basins, Wyoming and North Dakota

The U.S. Geological Survey (USGS), in cooperation with the Wyoming Reservoir Management Group (RMG) of the Bureau of Land Management (BLM) and nineteen independent coalbed methane (CBM) gas operators in the Powder River and Green River Basins in Wyoming and the Williston Basin in North Dakota, collected 963 coal samples from 37 core holes (fig. 1; table 1) between 1999 and 2005. The drilling and coring program was in response to the rapid development of CBM, particularly in the Powder River Basin (PRB), and the needs of the RMG BLM for new and more reliable data for CBM resource estimates and reservoir characterization. The USGS and BLM entered into agreements with the gas operators to drill and core Fort Union coal beds, thus supplying core samples for the USGS to analyze and provide the RMG with rapid, real-time results of total gas desorbed, coal quality, and high pressure methane adsorption isotherm data (Stricker and others, 2006). The USGS determined the ultimate composition of all coal core samples; for selected samples analyses also included proximate analysis, calorific value, equilibrium moisture, apparent specific gravity, and forms of sulfur. Analytical procedures followed those of the American Society of Testing Materials (ASTM; 1998). In addition, samples from three wells (129 samples) were analyzed for major, minor, and trace element contents. Ultimate and proximate compositions, calorific value, and forms of sulfur are fundamental parameters in evaluating the economic value of a coal. Determining trace element concentrations, along with total sulfur and ash yield, is also essential to assess the environmental effects of coal use, as is the suitability of the coal for cleaning, gasification, liquefaction, and other treatments. Determination of coal quality in the deeper part (depths greater than 1,000 to 1,200 ft) of the PRB (Rohrbacher and others, 2006; Luppens and others, 2006) is especially important, because these coals are targeted for future mining and development. This report contains summary tables, histograms, and isopleth maps of coal analyses. Details of the compositional internal variability of the coal beds are based on the continuous vertical sampling of coal sequences, including beds in the deeper part of the PRB. Such sampling allows for close comparisons of the compositions of different parts of coal beds as well as within the same coal beds at different core hole locations within short distances of each other.

Open-File Report↗

USGS2006

Gas desorption and adsorption isotherm studies of coals in the Powder River basin, Wyoming and adjacent basins in Wyoming and North Dakota

The U.S. Geological Survey (USGS), in cooperation with the State Office, Reservoir Management Group (RMG), of the Bureau of Land Management (BLM) in Casper (Wyoming), investigated the coalbed methane resources (CBM) in the Powder River Basin, Wyoming and Montana, from 1999 to the present. Beginning in late 1999, the study also included the Williston Basin in Montana and North and South Dakota and Green River Basin and Big Horn Basin in Wyoming. The rapid development of CBM (referred to as coalbed natural gas by the BLM) during the early 1990s, and the lack of sufficient data for the BLM to fully assess and manage the resource in the Powder River Basin, in particular, gave impetus to the cooperative program. An integral part of the joint USGS-BLM project was the participation of 25 gas operators that entered individually into confidential agreements with the USGS, and whose cooperation was essential to the study. The arrangements were for the gas operators to drill and core coal-bed reservoirs at their cost, and for the USGS and BLM personnel to then desorb, analyze, and interpret the coal data with joint funding by the two agencies. Upon completion of analyses by the USGS, the data were to be shared with both the BLM and the gas operator that supplied the core, and then to be released or published 1 yr after the report was submitted to the operator.

Open-File Report↗

USGS2006

Analytical results from samples collected during coal-bed methane exploration drilling in Caldwell Parish, Louisiana

In 2001, and 2002, the U.S. Geological Survey (USGS) and the Louisiana Geological Survey (LGS), through a Cooperative Research and Development Agreement (CRADA) with Devon SFS Operating, Inc. (Devon), participated in an exploratory drilling and coring program for coal-bed methane in north-central Louisiana. The USGS and LGS collected 25 coal core and cuttings samples from two coal-bed methane test wells that were drilled in west-central Caldwell Parish, Louisiana. The purpose of this report is to provide the results of the analytical program conducted on the USGS/LGS samples. The data generated from this project are summarized in various topical sections that include: 1. molecular and isotopic data from coal gas samples; 2. results of low-temperature ashing and X-ray analysis; 3. palynological data; 4. down-hole temperature data; 5. detailed core descriptions and selected core photographs; 6. coal physical and chemical analytical data; 7. coal gas desorption results; 8. methane and carbon dioxide coal sorption data; 9. coal petrographic results; and 10. geophysical logs.

Open-File Report↗

USGS2005

Thermal maturity patterns (CAI and %Ro) in the Ordovician and Devonian rocks of the Appalachian basin in West Virginia

The objective of this study is to enhance existing thermal maturity maps in West Virginia by establishing: 1) new subsurface CAI data points for the Ordovician and Devonian and 2) new %Ro and Rock Eval subsurface data points for Middle and Upper Devonian black shale units. Thermal maturity values for the Ordovician and Devonian strata are of major interest because they contain the source rocks for most of the oil and natural gas resources in the basin. Thermal maturity patterns of the Middle Ordovician Trenton Limestone are evaluated here because they closely approximate those of the overlying Ordovician Utica Shale that is believed to be the source rock for the regional oil and gas accumulation in Lower Silurian sandstones (Ryder and others, 1998) and for natural gas fields in fractured dolomite reservoirs of the Ordovician Black River-Trenton Limestones. Improved CAI-based thermal maturity maps of the Ordovician are important to identify areas of optimum gas generation from the Utica Shale and to provide constraints for interpreting the origin of oil and gas in the Lower Silurian regional accumulation and Ordovician Black River-Trenton fields. Thermal maturity maps of the Devonian will better constrain burial history-petroleum generation models of the Utica Shale, as well as place limitations on the origin of regional oil and gas accumulations in Upper Devonian sandstone and Middle to Upper Devonian black shale.

Open-File Report↗

USGS2002

Thermal maturity patterns (CAI and %Ro) in the Ordovician and Devonian rocks of the Appalachian basin in Pennsylvania

This report presents a series of new thermal maturation maps for Pennsylvania, based on conodont color alteration index (CAI) and vitrinite reflectance (%R o ). Also, RockEval and total organic carbon (TOC) data are included in the report. Two Paleozoic intervals were studied: Middle Ordovician carbonate rocks and Lower and Middle Devonian carbonate rocks and black shale. These intervals were chosen for several reasons: A) they represent target reservoir zones for most of the oil and gas exploration and drilling in Pennsylvania; B) they are stratigraphically near probable source rocks for the oil and gas; C) they include contiguous geologic formations that extend across most of Pennsylvania; D) they contain carbonate grainstone/packstone which give a reasonable to good probability of recovery of conodont elements from small samples of drill cuttings; and E) the Middle Devonian black shale contains large amounts of organic matter for geochemical analysis.

Pennsylvania↗