Geology topics

Michael Albert Mitchell

Publications and source records attributed to Michael Albert Mitchell.

5 recordsLinked to original sources

USGS2024

Summary of annual repeat magnetotelluric surveys of the Geysers geothermal field

As part of a multi-year project, funded by the California Energy Commission, annual magnetotelluric (MT) surveys have been collected at The Geysers geothermal field in northern California with the goal of measuring temporal changes within the steam field. The repeat surveys started in 2021 and repeated a 2017 survey (Peacock et al., 2020) with further extension to the southern part of the geothermal field. Temporal variations in the MT transfer functions are observed to be spatially coherent and compartmentalized. Mapping residual phase tensor ellipses demonstrates the direction of maximum change is often aligned with existing fracture orientations. Three dimensional inversion of the MT data, using the inversion results from previous years as the starting model, indicates that the steam reservoir has generally become more resistive over time (~10%), suggesting more steam in the field. A few pockets within the steam field have become more electrically conductive over time and are collocated with injection wells, suggesting either more fluid content in those zones, less steam, or more saline fluids.

California↗

USGS2023

Using DC resistivity ring array surveys to resolve conductive structures around tunnels or mine-workings

In underground environments, conventional direct current (DC) resistivity surveys with a single linear array of electrodes produce fundamentally non-unique inversions. These non-uniqueness and model resolution issues stem from limitations placed on the location of transmitters (TXs) and receivers (RXs) by the geometry of existing tunnels and boreholes. Poor excitation and/or sampling of the region of interest (ROI) can create artifacts and reduce the resolution of the recovered model. To address these problems we propose the use of an ensemble of ring arrays, which are created by placing one or more electrodes in each face (sidewalls, floor, and ceiling) of the tunnel to form a ring of electrodes at each along-tunnel location. Using a series of increasingly complex synthetic models, we assess the benefits of ring arrays and show that they can be used to better constrain the location and shape of anomalous bodies around the tunnel. Although ring arrays significantly improve the resolution of the recovered model, the size of the comprehensive ring array survey increases rapidly with the number of electrodes used. To balance model resolution and survey size, we developed a physics-based survey design methodology. In this methodology, TXs are selected based upon secondary charge accumulations on a test block that is moved throughout the ROI. Although this survey design methodology does not produce a strictly optimal survey, it balances model resolution and survey size in a practical and computationally efficient manner. Since the ring array more accurately estimates the around-tunnel location of targets and ensures that targets on all sides of the tunnel are detected, it is ideally suited to tunnel-based environments. Our results show that only about 6 % "> 6% of the possible TXs and 0.5 % "> 0.5% of the RXs in the comprehensive ring array survey are needed to retain the improvements in resolution. Therefore, economical ring array surveys can be designed for both reconnaissance and target characterization. Following the inversion of the reconnaissance dataset, additional rings can be added to reduce the inter-ring spacing or off-tunnel boreholes can be added to the region around identified anomalies to increase resolution as required.

Journal of Applied Geophysics↗

USGS2023

Imaging the magmatic plumbing of the Clear Lake Volcanic Field using 3-D gravity inversions

The Quaternary Clear Lake Volcanic Field (CLVF) in the Northern California Coast Range is the youngest of a string of northward-younging volcanic centers in the state. The CLVF is located within the broad San Andreas Transform Fault System and has been active intermittently for ∼2 million years. Heat beneath the CLVF supports The Geysers, one of the largest producing geothermal fields in the world. Previous geophysical studies proposed the existence of a magma reservoir beneath Mount Hannah, which is northeast of The Geysers, near the geographic center of the CLVF. The lateral extent, depth, and presence of melt within this reservoir are poorly constrained, as is the relationship between this body and the broader magmatic plumbing of the CLVF. To gain a clearer and more comprehensive picture of the CLVF magma source region, a gravity dataset was compiled and the first 3-D gravity inversions of the CLVF were completed. Field and synthetic model inversions from the current study both indicate that the gravity low roughly centered on Mount Hannah is not accurately explained by a 5–7 km thick lens of Mesozoic Great Valley Sequence ( ρ = 2.58 g/cm 3 "> �=2.58g/cm3 ) as proposed by Stanley et al. (1998) . The observed gravity low is more accurately described by one or more silicic, partial melt bodies between The Geysers and Mount Hannah. Although our inversions cannot constrain the exact depth and geometry of these bodies, the recovered models indicate the existence of a partial melt zone between 6 and 13 km depth. The prolonged eruption history of the CLVF, coupled with the compositional variation of erupted rocks over time and space, is consistent with the existence of several, potentially ephemeral, melt-bearing bodies as opposed to one large melt body. Given the density and location of the recovered anomaly, rhyolite-MELTS thermodynamic modeling suggests the existence of 10–30% rhyodacitic melt within the proposed silicic magma reservoir at about 700 °C and 8 km depth (210 MPa). Independent petrologic, geochemical, and seismic evidence indicates that this silicic partial melt zone is underlain by basaltic melt in the lower to middle crust (13 to 21 km depth), which is fed by a mantle source. Eruptions in the past ∼8.5–13.5 thousand years; high regional heat flow; 3 He enrichment of hydrothermal fluids; and our modeling, which suggests the presence of a mid-crustal, silicic partial melt zone, point to a still-active CLVF. The relatively low estimates of partial melt (10–30%) predicted by thermodynamic modeling indicates that an injection of new magma into the imaged partial melt zone is needed to generate sufficient melt to incite future eruptions. Despite the low percent melt estimates within the proposed silicic partial melt zone the potential for future volcanic eruption remains. Due to the proximity of the CLVF to cities surrounding Clear Lake and the densely populated San Francisco Bay Area, continued research and monitoring of the volcanic field are warranted. The geophysical and petrologic modeling presented here improves our understanding of the CLVF magma plumbing system and allows us to better characterize its associated volcanic hazards.

California↗

USGS2023

Magnetotelluric monitoring of the Geysers Steam Field, northern California: Phase 2

An original magnetotelluric (MT) survey collected in 2017 included 42 MT stations mainly in the northwestern part of The Geysers geothermal field in northern California. These data were modeled in 3D and imaged the electrically conductive cover, the electrically resistive steam field, and the electrically resistive Geysers plutonic complex (Peacock et al., 2020; Peacock et al. 2020a). Success of the original survey initiated collaboration between the U.S. Geological Survey and Lawrence Berkeley National Labs to monitor the steam field with MT and passive seismic to create a joint 4D model over the course of three years. This project, funded by the California Energy Commission, began in 2020. Two repeated MT surveys were collected at The Geysers, one in April 2021 (Peacock et al., 2022) and the second in April 2022 that extend further south adding 13 stations to the original 2017 survey. Reported here are observations comparing the 2017 data with the 2022 data. Preliminary results indicate the steam field changed in differently across the steam field, similar to changes observed between the 2017 and 2021 data.

California↗

USGS2022

Repeat magnetotelluric measurements to monitor The Geysers steam field in northern California

The Geysers in northern California is the world’s largest electricity generating steam field. To help understand changes in the steam reservoir, repeat magnetotelluric (MT) measurements are being collected once a year from 2021-2023. These data will be compared and modeled to provide 4-D images of changes within the reservoir. Joint inversion with passive seismic data will be done to further constrain changes observed in the geophysical models. This study describes the first repeat survey and provides comparisons with MT data collected in 2017. In April 2021, 41 of the 42 MT stations collected in 2017 were repeated in addition to 14 new stations in the southern part of the steam field. Calculating residual phase tensors from MT responses between the two surveys shows compartmentalized changes within the steam field. Changes are observed at periods longer than 1 second with the largest changes of up to 30 percent observed at periods of 30 seconds. The residual phase tensors also show good repeatability between the surveys for periods less than 1 second, with changes on the order of 1 percent. To model the data, the preferred 3D resistivity volume that resulted from the inversion of the 2017 data is employed as the starting model for inversion of the new data. The two resulting inversion models are then subtracted to identify areas of change within the reservoir.

California↗