Geology topics

Matthew R. Patrick

Publications and source records attributed to Matthew R. Patrick.

At least 37 records · Page 2Linked to original sources

USGS2022

Damage assessment for the 2018 lower East Rift Zone lava flows of Kīlauea volcano, Hawaiʻi

Cataloguing damage and its correlation with hazard intensity is one of the key components needed to robustly assess future risk and plan for mitigation as it provides important empirical data. Damage assessments following volcanic eruptions have been conducted for buildings and other structures following hazards such as tephra fall, pyroclastic density currents, and lahars. However, there are relatively limited quantitative descriptions of the damage caused by lava flows, despite the number of communities that have been devastated by lava flows in recent decades (e.g., Cumbre Vieja, La Palma, 2021; Nyiragongo, Democratic Republic of Congo, 2002 and 2021; Fogo, Cape Verde, 2014–2015). The 2018 lower East Rift Zone (LERZ) lava flows of Kīlauea volcano, Hawaiʻi, inundated 32.4 km 2 of land in the Puna District, including residential properties, infrastructure, and farmland. During and after the eruption, US Geological Survey scientists and collaborators took over 8000 aerial and ground photographs and videos of the eruption processes, deposits, and impacts. This reconnaissance created one of the largest available impact datasets documenting an effusive eruption and provided a unique opportunity to conduct a comprehensive damage assessment. Drawing on this georeferenced dataset, satellite imagery, and 2019 ground-based damage surveys, we assessed the pre-event typology and post-event condition of structures within and adjacent to the area inundated by lava flows during the 2018 LERZ eruption. We created a database of damage: each structure was assigned a newly developed damage state and data quality category value. We assessed 3165 structures within the Puna District and classified 1839 structures (58%) as destroyed, 90 structures (3%) as damaged, and 1236 (39%) as unaffected. We observed a range of damage states, affected by the structural typology and hazard characteristics. Our study reveals that structures may be damaged or destroyed beyond the lava flow margin, due to thermal effects from the lava flow, fire spread, or from exposure to a range of hazards associated with fissure eruptions, such as steam, volcanic gases, or tephra fall. This study provides a major contribution to the currently limited evidence base required to forecast future lava flow impacts and assess risk.

Hawaii↗

USGS2022

Rainfall an unlikely trigger of Kilauea’s 2018 rift eruption

If volcanic eruptions could be forecast from the occurrence of some external process, it might be possible to better mitigate risk and protect lives and livelihoods. Farquharson and Amelung 1 suggested that the 2018 lower East Rift Zone (ERZ) eruption of Kīlauea Volcano—the most destructive eruption in Hawai‘i in at least 200 years 2 —was triggered by extreme precipitation, which caused increased pore pressure that resulted in mechanical weakening of the volcano. Here we argue that Kīlauea’s 2018 eruption was instead caused by significant pre-eruptive pressurization, that pre-eruptive rainfall was not extreme, and that there is no significant correlation between rain and eruptions at Kīlauea. Understanding the causal mechanisms of volcanic eruptions is vital for hazard assessment and mitigation, and misattribution may compromise monitoring, preparedness, communication and response efforts.

Hawaii↗

USGS2022

Development, structure, and behavior of a perched lava channel at Kīlauea Volcano, Hawaiʻi, during 2007

Channelized lava flows are commonly produced during the early stages of basaltic eruptions. These channels usually maintain their morphology until the eruption ends or discharge is diverted. In some instances, narrower channels can roof over, developing into lava tubes. We report here on a channelized flow erupted at Kīlauea volcano in 2007 that evolved into a “perched lava channel” composed of a string of interconnected, elongate lava pools, forming a lava channel/lava pool hybrid. The lava channel, which had a time-averaged discharge rate of ~3–9 m 3 /s, initially fed a series of flow branches that exhibited cooling-limited and volume-limited controls on flow length, sometimes with each process controlling a different morphological aspect of a single flow branch. The perched lava channel grew vertically primarily by overplating of the channel levees from frequent overflows, forming a compound flow field. This vertical growth only occurred when the distal end of the channel was blocked. When levee failure at the distal end of the channel caused the lava level in the channel to drop below the levee rim, no vertical growth occurred. Seeps of spiny lava and slabby pāhoehoe were common, erupting from uplift scarps on the channel levees, apparently fed by sills from denser, relatively crystal-rich material filling the bottom of the channel. We infer that lava in the channel was stratified in vesicularity and velocity, with foamy, vesicular, faster-moving lava at the top of the lava stream and denser, relatively outgassed, slower-moving lava filling the bottom of the channel. The channel levees were unstable, failing on several occasions, perhaps triggered by the levee seeps. The appearance of seeps, therefore, is one way of assessing the collapse potential of similar perched lava structures.

Hawaii↗

USGS2021

Crater growth and lava-lake dynamics revealed through multitemporal terrestrial lidar scanning at Kīlauea Volcano, Hawaiʻi

Lava lake surfaces display the tops of active magma columns and respond to eruption variables such as magmatic pressure, convection, degassing, and cooling, as well as interactions with the craters that contain them. However, they are challenging to study owing to the numerous hazards that accompany these eruptions, and they are typically difficult to observe because the emitted gas plumes obscure the lava lake surfaces. The 2008–2018 Overlook crater and lava lake at Kīlauea Volcano, Hawaiʻi, provided a remarkable opportunity to study several high-resolution data streams of eruption variables that impacted the lava lake. To investigate how the crater and associated lava lake responded to changes in these eruption variables, we acquired terrestrial light detection and ranging (lidar) surveys of the Overlook crater and lava lake surface from February 2012 through December 2013, supplemented with several earlier terrestrial and airborne lidar datasets, to quantitatively track changes in the shape of the lava lake surface and the crater walls. Lidar captures high-resolution data even when the lake is completely obscured by thick gas plumes. We used a novel “unrolling technique” to map volumetric changes in crater shape, because standard elevation differencing fails to capture all topographic changes on the nearly vertical, and sometimes overhanging, crater walls. We measured crater perimeter growth rates of approximately 52 meters per year from 2009 to 2013, with the greatest growth occurring along a line linking areas of persistent upwelling and downwelling. We suggest that the development of an oblong crater with a perimeter that grows linearly is best explained by a model where degradation is favored at the sites of persistent upwelling and downwelling and where growth is controlled by a lithology that varies little with respect to rock strength. We also found that most of the Overlook crater growth occurred during a relatively small number of significant rockfall events (~16) over this period. Additional lidar datasets revealed that the lava lake surface has a measurable slope from the areas of persistent upwelling to downwelling, although rockfalls from the crater walls temporarily changed the direction of crustal plate movement along with the magnitude and direction of the lava lake surface slope. Our study demonstrates that lidar is an effective tool for tracking the topography of an active volcanic crater when heavy outgassing renders other tools, such as structure from motion, ineffective.

Hawaii↗

USGS2021

High-speed lava flow infrasound from Kīlauea’s fissure 8 and its utility in monitoring effusion rate

The 2018 eruption of Kīlauea Volcano produced large and destructive lava flows from the fissure 8 (Ahu ‘aila ‘au) vent with flow velocities up to 17 m s −1 , highly variable effusion rates over both short (minutes) and long (hours) time scales, and a proximal channel or spillway that displayed flow features similar to open channel flow in river systems. Monitoring such dynamic vent and lava flow systems is a challenge. Our results demonstrate that infrasound, combined with ground-based observations and imagery from unoccupied aircraft systems (UAS), can be used to distinguish vent degassing activity from high-speed lava flow activity. We use spectral characteristics and the infrasound frequency index (FI) to distinguish spillway infrasound from vent infrasound. Comparing FI with flow speeds derived from UAS videos reveals that spillway infrasound only occurs when flow speeds were sufficiently high to cause a supercritical flow state and breaking waves (Froude values > 1.7), and we propose that the spillway signals are produced primarily through the interaction of the turbulent lava-free surface with the atmosphere. We show that FI can also provide a means to track bulk effusion rate. Our results indicate that infrasound offers a new way to characterize lava flow channel hydraulics and is a powerful tool for monitoring effusive eruptions when high-speed flows are possible.

Hawaii↗

USGS2021

Evaluating lava flow propagation models with a case study from the 2018 eruption of Kīlauea Volcano, Hawai'i

The 2018 lower East Rift Zone (LERZ) eruption of Kīlauea, Hawai’i, provides an excellent natural laboratory with which to test models of lava flow propagation. During early stages of eruption crises, the most useful lava flow propagation equations utilize readily determined parameters and require fewer a priori assumptions about future behavior of the flow. Here, we leverage the numerous observations of lava flows collected over the duration of the eruption crisis at Kīlauea in 2018 to test simple lava flow propagation models. These models track the one-dimensional propagation of the flows according to three main rheological restraining forces: bulk viscosity, yield strength, and growth of a surface crust. We calculate the predicted changes in length through time of three flows that vary in bulk composition, crystal content, and total flow length. Cooler flows that are more crystal-rich tend to be more dominated by crust growth, though early stages of propagation can be controlled by bulk viscosity. We find that variations in effusion rate significantly impact flows that are short-lived; flows that are produced during steady-state effusion are readily approximated by average values for the entire flow. Thus, accurate knowledge of variations in effusion rate are critical to accurate lava flow propagation forecasting.

Hawaii↗

USGS2021

Brittle fragmentation by rapid gas separation in a Hawaiian fountain

Brittle fragmentation, generating small pyroclasts from magma, is a key process determining eruptive style. How low-viscosity magma fragments within a rising fountain in a brittle manner, however, is not well understood. Here we describe a fragmentation process in Hawaiian fountains on the basis of observations from the 2018 lower East Rift Zone eruption of Kīlauea Volcano, Hawai’i. The dominant fragmentation mechanism is inertia driven and produces a population of large fluidal pyroclasts. However, when sufficient volcanic gas is released in the fountain, a subpopulation of smaller and more vesicular pyroclasts is generated and entrained into the gas-dominant convective plume. The size distribution of these pyroclasts is similar to that of brittlely fragmented solid materials. The erupted high-vesicularity pyroclasts sometimes preserve a deformed shape. These observations suggest that late-stage rapid expansion lowers the gas temperature adiabatically and cools the outer surface of liquid pyroclasts below the glass transition temperature. The rigid crust fragments as the hot interior attempts to expand due to further volatile diffusion from the melt into bubbles. Adiabatic expansion of volcanic gas occurs in all eruptions. Brittle fragmentation induced by rapid adiabatic cooling may be a widespread process, although of varying importance, in explosive eruptions.

Hawaii↗

USGS2021

Lava effusion rate evolution and erupted volume during the 2018 Kīlauea lower East Rift Zone eruption

The 2018 eruption on the lower East Rift Zone of Kīlauea Volcano produced one of the largest and most destructive lava flows in Hawai’i during the past 200 years. Over the course of more than 3 months, twenty-four fissures erupted, and the rate of lava effusion varied by two orders of magnitude, with significant implications for evolving flow behavior and hazards. Syn-eruptive data were collected to quantify these changes in lava effusion rate, including video of flow through channels and digital elevation models acquired using small unoccupied aircraft systems, airborne lidar, and airborne single-pass interferometric synthetic aperture radar. Topographic data through time allowed calculation of subaerial lava flow volume and time-averaged discharge rate over the course of the eruption, which we integrated with pre- and post-eruption bathymetric surveys. Repeat videos of the near-vent channel were analyzed with particle velocimetry to extract flow velocities, and these were combined with open channel flow theory to calculate a time series of instantaneous effusion rates. Results show a general increase in dense rock equivalent (DRE) effusion rate from ~7 to ~100 m 3 /s from early to late May for the whole flow field and ≥ 200 m 3 /s by mid-June after the eruption had focused at a primary vent. By the end of the eruption in August, 0.9–1.4 km 3 DRE of lava had erupted, with 0.4 km 3 deposited on land and at least 0.5 km 3 offshore. The trends in effusion rate through time reflect magmatic processes in the connected summit and rift zone system that controlled eruption rate, with resulting implications for lava flow dynamics and hazards.

Hawaii↗

USGS2021

Patterns of bubble bursting and weak explosive activity in an active lava lake—Halema‘uma‘u, Kīlauea, 2015

The rise of the Halemaʻumaʻu lava lake in 2013–2018 to depths commonly 40 meters or less below the rim of the vent was an excellent opportunity to study outgassing and the link to associated eruptive activity. We use videography to investigate the rise and bursting of bubbles through the free surface of the lake in 2015. We focus on low-energy explosive activity (spattering) in which the ascent and bursting of meter-sized, mechanically decoupled bubbles trigger the ejection of fluidal bombs to tens of meters above the free surface. A decay in initial pyroclast velocity with time follows the same functional form as that observed for ejecta at Stromboli (Italy), suggesting a similar bubble-burst mechanism. We also find that the upward velocity of the bubble crust as it bursts is around 2.5 times higher than the velocity of the bubble as it rises through the lake surface, indicating that the bubbles are over-pressurized. Prior to bursting, bubbles emerge at velocities of 4 to 14 meters per second, suggesting rise from depths of at least tens of meters but unaffected by the deeper circulation of the lava lake. We identify three styles of bubble bursting: (1) isolated, widely spaced, single bursts, (2) recurring clusters of discrete bubbles, and (3) prolonged episodes of overlapping bubble bursts along elongate narrow sources typically parallel to the margins of the lava lake. We call these styles of bursting isolated events, clusters, and prolonged episodes, respectively. The frequency of bubble bursting and the mass fluxes of gas and pyroclasts increase from styles 1 to 3. The intensity (mass eruption rate) for single bubble bursts ranges from 280 to 3,500 kilograms per second. The total erupted mass of pyroclasts for a single burst is <4,000 kilograms (kg) and for a single well-constrained prolonged episode is about 10 7 kg. These numbers place the observed spattering at the lowest end of basaltic explosivity in terms of erupted mass (that is, magnitude). Most ejecta fell back into the crater; only strands of Pele’s hair rose to heights where they could be advected downwind from the vent. Collectively, the explosive activity accompanying the three styles of bubble bursting spans from impulsive, transient eruptive behaviors to sustained discharge; this shift represents progressively higher frequency and intensity of bubble bursting.

Hawaii↗

USGS2021

The birth of a Hawaiian fissure eruption

Most basaltic explosive eruptions intensify abruptly, allowing little time to document processes at the start of eruption. One opportunity came with the initiation of activity from fissure 8 (F8) during the 2018 eruption on the lower East Rift Zone of Kīlauea, Hawaii. F8 erupted in four episodes. We recorded 28 min of high‐definition video during a 51‐min period, capturing the onset of the second episode on 5 May. From the videos, we were able to analyze the following in‐flight parameters: frequency and duration of explosions; ejecta heights; pyroclast exit velocities; in‐flight total mass and estimated mass eruption rates; and the in‐flight total grain size distributions. The videos record a transition from initial pulsating outgassing, via spaced, but increasingly rapid, discrete explosions, to quasisustained, unsteady fountaining. This transition accompanied waxing intensity (mass flux) of the F8 eruption. We infer that all activity was driven by a combination of the ascent of a coupled mixture of small bubbles and melt, and the buoyant rise of decoupled gas slugs and/or pockets. The balance between these two types of concurrent flow determined the exact form of the eruptive activity at any point in time, and changes to their relative contributions drove the transition we observed at early F8. Qualitative observations of other Hawaiian fountains at Kīlauea suggest that this physical model may apply more generally. This study demonstrates the value of in‐flight parameters derived from high‐resolution videos, which offer a rapid and highly time‐sensitive alternative to measurements based on sampling of deposits posteruption.

Island of Hawai'i↗

USGS2021

Kīlauea’s 2008–2018 summit lava lake—Chronology and eruption insights

The first eruption at Kīlauea’s summit in 25 years began on March 19, 2008, and persisted for 10 years. The onset of the eruption marked the first explosive activity at the summit since 1924, forming the new “Overlook crater” (as the 2008 summit eruption crater has been informally named) within the existing crater of Halemaʻumaʻu. The first year consisted of sporadic lava activity deep within the Overlook crater. Occasional small explosions deposited spatter and small wall-rock lithic pieces around the Halemaʻumaʻu rim. After a month-long pause at the end of 2008, deep sporadic lava lake activity returned in 2009. Continuous lava lake activity began in February 2010. The lake rose significantly in late 2010 and early 2011, before subsequently draining briefly in March 2011. This disruption of the summit eruption was triggered by eruptive activity on the East Rift Zone. Rising lake levels through 2012 established a more stable, larger lake in 2013, with continued enlargement over the subsequent 5 years. Lava reached the Overlook crater rim and overflowed on the Halemaʻumaʻu floor in brief episodes in 2015, 2016, and 2018, but the lake level was more commonly 20–60 meters below the rim during 2014–18. The lake was approximately 280×200 meters (~42,000 square meters) by early 2018 and formed one of the two largest lava lakes on Earth. A new eruption began in the lower East Rift Zone on May 3, 2018, causing magma to drain from the summit reservoir complex. The lava in Halemaʻumaʻu had drained below the crater floor by May 10, followed by collapse of the Overlook and Halemaʻumaʻu craters. The collapse region expanded as much of the broader summit caldera floor subsided incrementally during June and July. By early August 2018, the collapse sequence had ended, and the summit was quiet. The historical changes in May–August 2018 brought a dramatic end to the decade of sustained activity at Kīlauea’s summit. The unique accessibility of the 2008–18 lava lake provided new observations of lava lake behavior and open-vent basaltic outgassing. Data indicated that explosions were triggered by rockfalls from the crater walls, that the lake consisted of a low-density foamy lava, that cycles of gas pistoning were rooted at shallow depths in the lake, and that lake level fluctuations were closely tied to the pressure of the summit magma reservoir. Lava chemistry added further support for an efficient hydraulic connection between the summit and East Rift Zone. Notwithstanding the benefits to scientific understanding, the eruption presented a persistent hazard of volcanic air pollution (vog) that commonly extended far from Kīlauea’s summit.

Hawaii↗

USGS2021

Onset and evolution of Kilauea’s 2018 flank eruption and summit collapse from continuous gravity

Prior to the 2018 lower East Rift Zone (ERZ) eruption and summit collapse of Kīlauea Volcano, Hawai‘i, continuous gravimeters operated on the vent rims of ongoing eruptions at both the summit and Pu‘u ‘Ō‘ō. These instruments captured the onset of the 2018 lower ERZ eruption and the effects of lava withdrawal from both locales, providing constraints on the timing and style of activity and the physical properties of the lava lakes at both locations. At the summit, combining gravity, lava level, and a three-dimensional model of the vent indicates that the upper ∼200 m of the lava lake had a density of about 1700 kg m −3 , slightly greater than estimates from 2011–2015 and possibly indicating a gradual densification over time. At Pu‘u ‘Ō‘ō, gravity and vent geometry were used to model both the density and the rate of crater collapse, which was unknown owing to a lack of visual observations. Results suggest the withdrawal of at least 11×106 m 3 of lava over the course of two hours, and a material density of 1800–1900 kg m −3 . In addition, gravity data at Pu‘u ‘Ō‘ō captured a transient decrease and increase about an hour prior to crater collapse and that was probably related to a small, short-lived fissure eruption on the west flank of the cone and possibly to dike intrusion beneath Pu‘u ‘Ō‘ō. The fissure was the first event in the subsequent cascade that ultimately led to the extrusion of over 1 km 3 of lava from lower ERZ vents, collapse of the summit caldera floor by more than 500 m, and the destruction of over 700 homes and other structures. These results emphasize the importance of continuous gravity in operational monitoring of active volcanoes.

Hawaii↗

USGS2020

Monitoring network changes during the 2018 Kīlauea Volcano eruption

In the summer of 2018, Kīlauea Volcano underwent one of its most significant eruptions in the past few hundred years. The volcano’s summit and East Rift Zone magma system partially drained, resulting in a series of occasionally explosive partial caldera collapses, and widespread lava flows in the lower East Rift Zone. The Hawaiian Volcano Observatory (HVO) operates a robust permanent monitoring network of about 250 stations, recording a variety of real‐time data streams: seismic (short‐period, broadband, strong‐motion), infrasound, Global Navigation Satellite Systems (GNSS), tilt, camera, laser rangefinder, and gas geochemistry. During the eruption, HVO staff quickly established 35 new temporary monitoring stations, to better constrain evolving volcanic hazards. The partial collapses of the caldera threatened to disrupt important telemetry links in the HVO monitoring network, and a major effort was undertaken in the midst of the eruption crisis to reroute radio telemetry and maintain continuity of data flow. In the process, a new data center was established in Hilo, to mitigate a long‐standing potential single point of failure at the HVO facility. Over the course of the eruption from May through August, lava, ashfall, wildfire, and cliff collapse destroyed or disabled 36 stations. Thousands of earthquakes damaged the main HVO facility at Uēkahuna Bluff, causing staff to evacuate the building and relocate observatory operations in the midst of the eruption response, adding more complexity to the response effort. Throughout these events, the HVO team maintained the monitoring network, provided timely information to the public and emergency managers, and collected valuable scientific data to better understand Kīlauea Volcano.

Hawaii↗

USGS2020

The cascading origin of the 2018 Kīlauea eruption and implications for future forecasting

The 2018 summit and flank eruption of Kīlauea Volcano was one of the largest volcanic events in Hawaiʻi in 200 years. Data suggest that a backup in the magma plumbing system at the long-lived Puʻu ʻŌʻō eruption site caused widespread pressurization in the volcano, driving magma into the lower flank. The eruption evolved, and its impact expanded, as a sequence of cascading events, allowing relatively minor changes at Puʻu ʻŌʻō to cause major destruction and historic changes across the volcano. Eruption forecasting is inherently challenging in cascading scenarios where magmatic systems may prime gradually and trigger on small events.

Hawaii↗

USGS2020

The historic events at Kilauea Volcano in 2018: Summit collapse, rift zone eruption, and Mw 6.9 earthquake: Preface to the special issue

Kīlauea Volcano, on the Island of Hawaiʻi, has had a prominent role in the science of volcanology, and a long history of generating new insights into how volcanoes operate (Tilling et al. 2014; Garcia 2015). Native Hawaiians shared ideas on the behavior of the volcano with early Western visitors to Kīlauea, addressing the basic geometry of magma supply and transport (Ellis 1825; Bishop 1827). The recognition that magma originated at the summit and was transferred at shallow levels to the flanks implied that these ideas were rooted in centuries of observation preceding Western contact. The lava lake activity at Kīlauea’s summit in the 1800s and early 1900s fascinated early geologists, such as James Dana (1890), who published one of the first inquiries into the fundamental processes of Hawaiian volcanoes. The sustained activity led to the 1912 founding of the Hawaiian Volcano Observatory, one of the world’s first volcano observatories, by Thomas Jaggar (Tilling et al. 2014). Kīlauea’s activity in the 20th century contributed to the development of many modern volcano monitoring techniques (Tilling et al. 2014), which helped refine conceptual models of how volcanoes behave (Eaton and Murata, 1960).

Hawaii↗

USGS2019

Insights into pāhoehoe lava emplacement using visible and thermal structure-from-motion photogrammetry

We present the evolution over 3 months of a 2016–2017 pāhoehoe flow at Kīlauea as it changed from a narrow sheet flow into a compound lava field fed by a stable system of tubes. The portion of the flow located on Kīlauea's coastal plain was characterized using helicopter‐based visible and thermal structure‐from‐motion photogrammetry to construct a series of georeferenced digital surface models and thermal maps on eight different days. Results reveal key influences on the emplacement and evolution of such long‐lived pāhoehoe flows. This region of the flow grew by ~12 × 10 6 m 3 with a near‐constant time‐average discharge rate of 1.2–2.7 m 3 /s. The development of two tube systems is captured and shows an initial nascent tube enhanced by a narrow topographic confinement, which later inflated and created a topographic inversion that modulated the emplacement of a second flow lobe with its own tube system. The analysis of breakouts at various stages of the field's life suggests that the evolution of the thermal and morphological properties of the flow surface reflect its maturity. Thermal properties of breakouts were used to expand the empirical relationship of breakout cooling to longer timescales. This study contributes to the long‐term development and validation of more accurate predictive models for pāhoehoe, required during the management of long‐lasting lava flow crises in Hawai'i and elsewhere.

Hawaii↗

USGS2019

Controls on lava lake level at Halema‘uma‘u Crater, Kīlauea Volcano

The height of the lava column is a fundamental measure of open-vent volcanic activity, but little continuous long-term data exist to understand this parameter. The recent (2008-2018) lava lake activity at the summit of Kīlauea Volcano provides a unique opportunity to track and understand the processes that control lava level over timescales ranging from minutes to years. We review recently published data as well as analyze the long-term record of lava level at Kīlauea’s summit during 2009-2017. Longer timescale fluctuations, over days to months, have a strong positive linear correlation with ground deformation, suggesting they reflect pressure changes in the summit magma reservoir. Shorter timescale fluctuations, over minutes to hours, have an inverse relationship with spattering (i.e. outgassing) intensity at the lake surface – increased outgassing lowers the lake level and vice versa. Our analysis of the long-term lava level data thus confirms that lava level at Halemaʻumaʻu is controlled by these two types of processes: 1) those related to magma reservoir pressure changes (such as magma supply rate) and 2) shallow outgassing fluctuations (such as gas pistoning). Frequency filtering can isolate pressure- and outgassing-driven components of lava level change. Time series analysis indicates that there was no large, persistent periodicity in the lava level; a minor fortnightly oscillation might be related to Earth tides but was not continuously present. The remarkable correlation between lava level and deformation of the summit indicates that the lava lake acts as a reliable “piezometer”; tracking lava level over time may thus provide an indication of flank eruptive potential. We show that long-term interdisciplinary monitoring is necessary to discriminate the processes that control lava level.

Hawaii↗

USGS2019

A global synthesis of lava lake dynamics

Active lava lakes represent a variety of open-vent volcanism in which a sizeable body of lava accumulates at the top of the magma column, constrained by the vent and/or crater geometry. The longevity of lava lakes reflects a balancing of cooling and outgassing occurring at the surface by input of hot and gas-rich magma from below. Due to their longevity and relative accessibility, lava lakes provide a natural laboratory for studying fundamental volcanic processes such as degassing, convection and cooling. This article examines all seven lakes that existed at the time of writing, located in the Pacific, Antarctica, Africa, and South and Central America. They span all tectonic environments, and a range of magma compositions. We focus on analysis of the lake surface motion using image velocimetry, which reveals both similarities and contrasts in outgassing and lake dynamics when comparing the different lakes. We identify two categories of lake behavior: Organized (Erta ’Ale, Nyiragongo, K¯ılauea after 2011, and Erebus) and Chaotic (Villarrica,Masaya, Marum). This division does not map directly to lake size, viscosity, gas emission rate, or temperature. Instead, when examined together, we find that the lakes follow a linear relationship between average surface speed and the ratio of total gas flux to lake surface area. This relationship points to the importance of both flux and lake size in addition to the total volumetric outgassing rate, and suggests a shared deep mechanism controls the supply of heat and gas to all lakes. On the other hand, the differences between Chaotic and Organized lakes highlight the important role of the geometry of the conduit-lake transition, which superimposes a shallow signal on that of the deep circulation. The spatial patterns of surface motion we document suggest the release of gas bubbles at Chaotic lakes is more efficient (i.e., bubbles are less likely to be retained and recycled) compared with Organized lakes. In addition, the data presented here indicate that the solidified crust of Organized lakes plays a role in regulating convection and outgassing in lava lakes.

Journal of Volcanology and Geothermal Research↗