Search USGSSearch

Geology topics

Matthew P. Golombek

Publications and source records attributed to Matthew P. Golombek.

15 recordsLinked to original sources

Seismically detected cratering on Mars: Enhanced recent impact flux?

Seismic observations of impacts on Mars indicate a higher impact flux than previously measured. Using six confirmed seismic impact detections near the NASA InSight lander and two distant large impacts, we calculate appropriate scalings to compare these rates with lunar-based chronology models. We also update the impact rate from orbital observations using the most recent catalog of new craters on Mars. The snapshot of the current impact rate at Mars recorded seismically is higher than that found using orbital detections alone. The measured rates differ between a factor of 2 and 10, depending on the diameter, although the sample size of seismically detected impacts is small. The close timing of the two largest new impacts found on Mars in the past few decades indicates either a heightened impact rate or a low-probability temporal coincidence, perhaps representing recent fragmentation of a parent body. We conclude that seismic methods of detecting current impacts offer a more complete dataset than orbital imaging.

Science Advances

A large new crater exposes the limits of water ice on Mars

Water ice in the Martian mid-latitudes has advanced and retreated in response to variations in the planet's orbit, obliquity, and climate. A 150 m-diameter new impact crater near 35°N provides the lowest-latitude impact exposure of subsurface ice on Mars. This is the largest known ice-exposing crater and provides key constraints on Martian climate history. This crater indicates a regional, relatively pure ice deposit that is unstable and has nearly vanished. In the past, this deposit may have been tens of meters thick and extended equatorward of 35°N. We infer that it is overlain by pore ice emplaced during temporary stable intervals, due to recent climate variability. The marginal survival of ice here suggests that it is near the edge of shallow ice that regularly exchanges with the atmosphere.

Geophysical Research Letters

Largest recent impact craters on Mars: Orbital imaging and surface seismic co-investigation

Two 130+ meter diameter impact craters formed on Mars during the later half of 2021. These are the two largest fresh impact craters discovered by the Mars Reconnaissance Orbiter since operations started 16 years ago. The impacts created two of the largest seismic events (magnitudes greater than 4) recorded by InSight during its three year mission. The combination of orbital imagery and seismic ground motion enables the investigation of subsurface and atmospheric energy partitioning of the impact process on a planet with a thin atmosphere and the first direct test of Martian deep-interior seismic models with known event distances.The impact at 35°N excavated blocks of water ice, which is the lowest latitude ice has been directly observed on Mars.

Science

Degradation of 100‐m‐scale rocky ejecta craters at the InSight Landing Site on Mars and implications for surface processes and erosion rates in the hesperian and amazonian

Rocky ejecta craters (RECs) at the Interior Exploration using Seismic Investigations, Geodesy and Heat Transport (InSight) landing site on Elysium Planitia, Mars, provide constraints on crater modification and rates for the Hesperian and Amazonian. The RECs are between 10 m and 1.2 km in diameter and exhibit five classes of preservation. Class 1 represents pristine craters with sharp rims and abundant ejected rocks. From Classes 2 to 5, rims become more subdued, craters are infilled, and the ejecta become discontinuously distributed. High‐Resolution Imaging Science Experiment digital elevation models indicate a maximum depth to diameter ratio of ~0.15, which is lower than pristine models for craters of similar size. The low ratio is related to the presence of a loosely consolidated regolith and early‐stage eolian infill. Rim heights have an average height to diameter ratio of ~0.03 for the most pristine class. The size‐frequency distribution of RECs, plotted using cumulative and differential methods, indicates that crater classes within the diameter range of 200 m to 1.2 km are separated by ~100 to 200 Myr. Smaller craters degrade faster, with classes separated by <100 Myr. Rim erosion can be entirely modeled by nonlinear diffusional processes using the calculated timescales and a constant diffusivity of 8 × 10 −7 m 2 /year for craters 200 to 500 m in diameter. Diffusion models only partly capture depth‐related degradation, which requires eolian infill. Depth degradation and rim erosion rates are 10 −2 to 10 −3 m/Myr, respectively. The rates are consistent with relatively slow modification that is typical of the last two epochs of Martian history.

Journal of Geophysical Research - Planets

Analysis of local slopes at the InSight landing site on Mars

To evaluate the topography of the surface within the InSight candidate landing ellipses, we generated Digital Terrain Models (DTMs) at lander scales and those appropriate for entry, descent, and landing simulations, along with orthoimages of both images in each stereopair, and adirectional slope images. These products were used to assess the distribution of slopes for each candidate ellipse and terrain type in the landing site region, paying particular attention to how these slopes impact InSight landing and engineering safety, and results are reported here. Overall, this region has extremely low slopes at 1-meter baseline scales and meets the safety constraints of the InSight lander. The majority of the landing ellipse has a mean slope at 1-meter baselines of 3.2°. In addition, a mosaic of HRSC, CTX, and HiRISE DTMs within the final landing ellipse (ellipse 9) was generated to support entry, descent, and landing simulations and evaluations. Several methods were tested to generate this mosaic and the NASA Ames Stereo Pipeline program dem_mosaic produced the best results. For the HRSC-CTX-HiRISE DTM mosaic, more than 99 % of the mosaic has slopes less than 15°, and the introduction of artificially high slopes along image seams was minimized.

Space Science Reviews

High concentrations of manganese and sulfur in deposits on Murray Ridge, Endeavour Crater, Mars

Mars Reconnaissance Orbiter HiRISE images and Opportunity rover observations of the ~22 km wide Noachian age Endeavour Crater on Mars show that the rim and surrounding terrains were densely fractured during the impact crater-forming event. Fractures have also propagated upward into the overlying Burns formation sandstones. Opportunity&rsquo;s observations show that the western crater rim segment, called Murray Ridge, is composed of impact breccias with basaltic compositions, as well as occasional fracture-filling calcium sulfate veins. Cook Haven, a gentle depression on Murray Ridge, and the site where Opportunity spent its sixth winter, exposes highly fractured, recessive outcrops that have relatively high concentrations of S and Cl, consistent with modest aqueous alteration. Opportunity&rsquo;s rover wheels serendipitously excavated and overturned several small rocks from a Cook Haven fracture zone. Extensive measurement campaigns were conducted on two of them: Pinnacle Island and Stuart Island. These rocks have the highest concentrations of Mn and S measured to date by Opportunity and occur as a relatively bright sulfate-rich coating on basaltic rock, capped by a thin deposit of one or more dark Mn oxide phases intermixed with sulfate minerals. We infer from these unique Pinnacle Island and Stuart Island rock measurements that subsurface precipitation of sulfate-dominated coatings was followed by an interval of partial dissolution and reaction with one or more strong oxidants (e.g., O 2 ) to produce the Mn oxide mineral(s) intermixed with sulfate-rich salt coatings. In contrast to arid regions on Earth, where Mn oxides are widely incorporated into coatings on surface rocks, our results demonstrate that on Mars the most likely place to deposit and preserve Mn oxides was in fracture zones where migrating fluids intersected surface oxidants, forming precipitates shielded from subsequent physical erosion.

American Mineralogist

Properties and distribution of paired candidate stony meteorites at Meridiani Planum

The Mars Exploration Rover Opportunity investigated four rocks, informally dubbed Barberton, Santa Catarina, Santorini, and Kasos, that are possible stony meteorites. Their chemical and mineralogical composition is similar to the howardite, eucrite, and diogenite group but with additional metal, similar to mesosiderite silicate clasts. Because of their virtually identical composition and because they appear to represent a relatively rare group of meteorites, they are probably paired. The four rocks were investigated serendipitously several kilometers apart, suggesting that Opportunity is driving across a larger population of similar rock fragments, maybe a meteorite strewn field. Small amounts of ferric Fe are a result of weathering. We did not observe evidence for fusion crusts. Four iron meteorites were found across the same area. Although mesosiderites are stony irons, a genetic link to these irons is unlikely. The stony meteorites probably fell later than the irons. The current atmosphere is sufficiently dense to land such meteorites at shallow entry angles, and it would disperse fragments over several kilometers upon atmospheric breakup. Alternatively, dispersion by spallation from an impacting meteoroid may have occurred. Santa Catarina and a large accumulation of similar rocks were found at the rim of Victoria crater. It is possible that they are associated with the impactor that created Victoria crater, but our limited knowledge about their distribution cannot exclude mere coincidence.

Journal of Geophysical Research E: Planets

Degradation of Victoria crater, Mars

The ∼750 m diameter and ∼75 m deep Victoria crater in Meridiani Planum, Mars, is a degraded primary impact structure retaining a ∼5 m raised rim consisting of 1–2 m of uplifted rocks overlain by ∼3 m of ejecta at the rim crest. The rim is 120–220 m wide and is surrounded by a dark annulus reaching an average of 590 m beyond the raised rim. Comparison between observed morphology and that expected for pristine craters 500–750 m across indicates that the original, pristine crater was close to 600 m in diameter. Hence, the crater has been erosionally widened by ∼150 m and infilled by ∼50 m of sediments. Eolian processes are responsible for most crater modification, but lesser mass wasting or gully activity contributions cannot be ruled out. Erosion by prevailing winds is most significant along the exposed rim and upper walls and accounts for ∼50 m widening across a WNW–ESE diameter. The volume of material eroded from the crater walls and rim is ∼20% less than the volume of sediments partially filling the crater, indicating eolian infilling from sources outside the crater over time. The annulus formed when ∼1 m deflation of the ejecta created a lag of more resistant hematite spherules that trapped <10–20 cm of darker, regional basaltic sands. Greater relief along the rim enabled meters of erosion. Comparison between Victoria and regional craters leads to definition of a crater degradation sequence dominated by eolian erosion and infilling over time.

Journal of Geophysical Research E: Planets

Columbia Hills, Mars: aeolian features seen from the ground and orbit

Abundant wind-related features occur along Spirit's traverse into the Columbia Hills over the basaltic plains of Gusev Crater. Most of the windblown sands are probably derived from weathering of rocks within the crater, and possibly from deposits associated with Ma'adim Vallis. Windblown particles act as agents of abrasion, forming ventifacts, and are organized in places into various bed forms. Wind-related features seen from orbit, results from atmospheric models, and considerations of topography suggest that the general wind patterns and transport pathways involve: (1) winter nighttime winds that carry sediments from the mouth of Ma'adim Vallis into the landing site area of Spirit, where they are mixed with locally derived sediments, and (2) winter daytime winds that transport the sediments from the landing site southeast toward Husband Hill; similar patterns occur in the summer but with weaker winds. Reversals of daytime flow out of Gusev Crater and nighttime wind flow into the crater can account for the symmetry of the bed forms and bimodal orientations of some ventifacts.

Journal of Geophysical Research E: Planets

Spirit rover localization and topographic mapping at the landing site of Gusev crater, Mars

By sol 440, the Spirit rover has traversed a distance of 3.76 km (actual distance traveled instead of odometry). Localization of the lander and the rover along the traverse has been successfully performed at the Gusev crater landing site. We localized the lander in the Gusev crater using two-way Doppler radio positioning and cartographic triangulations through landmarks visible in both orbital and ground images. Additional high-resolution orbital images were used to verify the determined lander position. Visual odometry and bundle adjustment technologies were applied to compensate for wheel slippage, azimuthal angle drift, and other navigation errors (which were as large as 10.5% in the Husband Hill area). We generated topographic products, including 72 ortho maps and three-dimensional (3-D) digital terrain models, 11 horizontal and vertical traverse profiles, and one 3-D crater model (up to sol 440). Also discussed in this paper are uses of the data for science operations planning, geological traverse surveys, surveys of wind-related features, and other science applications.

Journal of Geophysical Research E: Planets

The rayed crater Zunil and interpretations of small impact craters on Mars

A 10-km diameter crater named Zunil in the Cerberus Plains of Mars created &#x223C; 10 7 "> ∼107 secondary craters 10 to 200 m in diameter. Many of these secondary craters are concentrated in radial streaks that extend up to 1600 km from the primary crater, identical to lunar rays. Most of the larger Zunil secondaries are distinctive in both visible and thermal infrared imaging. MOC images of the secondary craters show sharp rims and bright ejecta and rays, but the craters are shallow and often noncircular, as expected for relatively low-velocity impacts. About 80% of the impact craters superimposed over the youngest surfaces in the Cerberus Plains, such as Athabasca Valles, have the distinctive characteristics of Zunil secondaries. We have not identified any other large (⩾10 km diameter) impact crater on Mars with such distinctive rays of young secondary craters, so the age of the crater may be less than a few Ma. Zunil formed in the apparently youngest (least cratered) large-scale lava plains on Mars, and may be an excellent example of how spallation of a competent surface layer can produce high-velocity ejecta (Melosh, 1984, Impact ejection, spallation, and the origin of meteorites, Icarus 59, 234–260). It could be the source crater for some of the basaltic shergottites, consistent with their crystallization and ejection ages, composition, and the fact that Zunil produced abundant high-velocity ejecta fragments. A 3D hydrodynamic simulation of the impact event produced 10 10 rock fragments ⩾10 cm diameter, leading to up to 10 9 secondary craters ⩾10 m diameter. Nearly all of the simulated secondary craters larger than 50 m are within 800 km of the impact site but the more abundant smaller (10–50 m) craters extend out to 3500 km. If Zunil is representative of large impact events on Mars, then secondaries should be more abundant than primaries at diameters a factor of ∼1000 smaller than that of the largest primary crater that contributed secondaries. As a result, most small craters on Mars could be secondaries. Depth/diameter ratios of 1300 small craters (10–500 m diameter) in Isidis Planitia and Gusev crater have a mean value of 0.08; the freshest of these craters give a ratio of 0.11, identical to that of fresh secondary craters on the Moon (Pike and Wilhelms, 1978, Secondary-impact craters on the Moon: topographic form and geologic process, Lunar Planet. Sci. IX, 907–909) and significantly less than the value of ∼0.2 or more expected for fresh primary craters of this size range. Several observations suggest that the production functions of Hartmann and Neukum (2001, Cratering chronology and the evolution of Mars, Space Sci. Rev. 96, 165–194) predict too many primary craters smaller than a few hundred meters in diameter. Fewer small, high-velocity impacts may explain why there appears to be little impact regolith over Amazonian terrains. Martian terrains dated by small craters could be older than reported in recent publications.

Icarus

New Perspectives on Ancient Mars

Mars was most active during its first billion years. The core, mantle, and crust formed within ∼50 million years of solar system formation. A magnetic dynamo in a convecting fluid core magnetized the crust, and the global field shielded a more massive early atmosphere against solar wind stripping. The Tharsis province became a focus for volcanism, deformation, and outgassing of water and carbon dioxide in quantities possibly sufficient to induce episodes of climate warming. Surficial and near-surface water contributed to regionally extensive erosion, sediment transport, and chemical alteration. Deep hydrothermal circulation accelerated crustal cooling, preserved variations in crustal thickness, and modified patterns of crustal magnetization.

Science

Initial results of rover localization and topographic mapping for the 2003 mars exploration rover mission

This paper presents the initial results of lander and rover localization and topographic mapping of the MER 2003 mission (by Sol 225 for Spirit and Sol 206 for Opportunity). The Spirit rover has traversed a distance of 3.2 km (actual distance traveled instead of odometry) and Opportunity at 1.2 km. We localized the landers in the Gusev Crater and on the Meridiani Planum using two-way Doppler radio positioning technology and cartographic triangulations through landmarks visible in both orbital and ground images. Additional high-resolution orbital images were taken to verify the determined lander positions. Visual odometry and bundle-adjustment technologies were applied to overcome wheel slippages, azimuthal angle drift and other navigation errors (as large as 21 percent). We generated timely topographic products including 68 orthophoto maps and 3D Digital Terrain Models, eight horizontal rover traverse maps, vertical traverse profiles up to Sol 214 for Spirit and Sol 62 for Opportunity, and five 3D crater models. A web-based landing-site Geographic Information System (GIS) has been set up at The Ohio State University to update and disseminate the daily localization and topographic information to support tactical and strategic operations of the mission. Also described in this paper are applications of the data for science operations planning, geological traverse survey, survey of wind-related features, and other science applications. The majority of the instruments onboard both rovers are healthy at this moment, and they will continue to explore the two landing sites on the Martian surface. We expect to report further localization and topographic mapping results to be achieved in the rest of the mission period and in post-mission data processing.

Photogrammetric Engineering and Remote Sensing

Results of the Imager for Mars Pathfinder windsock experiment

The Imager for Mars Pathfinder (IMP) windsock experiment measured wind speeds at three heights within 1.2 m of the Martian surface during Pathfinder landed operations. These wind data allowed direct measurement of near-surface wind profiles on Mars for the first time, including determination of aerodynamic roughness length and wind friction speeds. Winds were light during periods of windsock imaging, but data from the strongest breezes indicate aerodynamic roughness length of 3 cm at the landing site, with wind friction speeds reaching 1 m/s. Maximum wind friction speeds were about half of the threshold-of-motion friction speeds predicted for loose, fine-grained materials on smooth Martian terrain and about one third of the threshold-of-motion friction speeds predicted for the same size particles over terrain with aerodynamic roughness of 3 cm. Consistent with this, and suggesting that low wind speeds prevailed when the windsock array was not imaged and/or no particles were available for aeolian transport, no wind-related changes to the surface during mission operations have been recognized. The aerodynamic roughness length reported here implies that proposed deflation of fine particles around the landing site, or activation of duneforms seen by IMP and Sojourner, would require wind speeds >28 m/s at the Pathfinder top windsock height (or >31 m/s at the equivalent Viking wind sensor height of 1.6 m) and wind speeds >45 m/s above 10 m. These wind speeds would cause rock abrasion if a supply of durable particles were available for saltation. Previous analyses indicate that the Pathfinder landing site probably is rockier and rougher than many other plains units on Mars, so aerodynamic roughness length elsewhere probably is less than the 3-cm value reported for the Pathfinder site.

Journal of Geophysical Research E: Planets

Topography of closed depressions, scarps, and grabens in the North Tharsis region of Mars: implications for shallow crustal discontinuities and graben formation

Using Viking Orbiter images, detailed photoclinometric profiles were obtained across 10 irregular depressions, 32 fretted fractures, 49 troughs and pits, 124 solitary scarps, and 370 simple grabens in the north Tharsis region of Mars. These data allow inferences to be made on the shallow crustal structure of this region. The frequency modes of measured scarp heights correspond with previous general thickness estimates of the heavily cratered and ridged plains units. The depths of the flat-floored irregular depressions (55-175 m), fretted fractures (85-890 m), and troughs and pits (60-1620 m) are also similar to scarp heights (thicknesses) of the geologic units in which these depressions occur, which suggests that the depths of these flat-floored features were controlled by erosional base levels created by lithologic contacts. Although the features have a similar age, both their depths and their observed local structural control increase in the order listed above, which suggests that the more advanced stages of associated fracturing facilitated the development of these depressions by increasing permeability. If a ground-ice zone is a factor in development of these features, as has been suggested, our observation that the depths of these features decrease with increasing latitude suggests that either the thickness of the ground-ice zone does not increase poleward or the depths of the depressions were controlled by the top of the ground-ice zone whose depth may decrease with latitude. Deeper discontinuities are inferred from fault-intersection depths of 370 simple grabens (assuming 60° dipping faults that initiate at a mechanical discontinuity) in Tempe Terra and Alba Patera and from the depths of the large, flat-floored troughs in Tempe Terra. The frequency distributions of these fault-intersection and large trough depths show a concentration at 1.0-1.6 km depth, similar to data obtained for Syria, Sinai, and Lunae Plana. The consistency of these depth data over such a large region of western Mars suggests that a discontinuity or a process that transcends local and regional geology is responsible for the formation of these features. If this discontinuity is represented by the base of the cryosphere, its uniform depth over 55° of latitude suggests that the cryosphere did not thicken poleward. Alternatively, the concentration of depths at 1.0-1.6 km may represent the upper level of noneruptive dike ascent (lateral dike propagation) of Mars, which is controlled by gravity and atmospheric pressure and magma and country-rock characteristics, and was probably controlled, in part, by ground ice. Fault-intersection depths in the north Tharsis region locally extend down to a depth of 5-7 km. The depth data between 2 and 3 km are attributed to the discontinuity at the interface of megaregolith and basement or to the upper limit of noneruptive dike ascent of magma with a high volatile content. Intersection depths greater than 3 km, which were found at Alba Patera, may be due to the megaregolith-basement discontinuity, which was buried and depressed by volcanic loading, or to the upper level of noneruptive dike ascent of magma with a low volatile content. The near absence of narrow simple grabens with fault-initiation depths less than 0.6-1.0 km in this study area, as well as in most of western Mars, suggests that this depth represents the minimum depth that normal faults can initiate; at shallower depths tension cracks or joints would form instead. This hypothesis is supported by the application of the Griffith failure criterion to this minimum depth of normal fault initiation, which suggests that shallow crustal materials have a tensile strength of 2-4 MPa throughout most of western Mars, in close agreement with previous estimates of tensile strength of martian basaltic rock.

Icarus