Geology topics

Matthew Alexander Burgess

Publications and source records attributed to Matthew Alexander Burgess.

6 recordsLinked to original sources

USGS2025

Absolute radiometric calibration evaluation of Uncrewed Aerial System (UAS) Headwall and MicaSense sensors and improving data quality using the Empirical Line Method

The use of Uncrewed Aerial Systems (UASs) for remote sensing applications has increased significantly in recent years due to their low cost, operational flexibility, and rapid advancements in sensor technologies. In many cases, UAS platforms are considered viable alternatives to conventional satellite and crewed airborne platforms, offering very high spatial, spectral, and temporal resolution data. However, the radiometric quality of UAS-acquired data has not received equivalent attention, particularly with respect to absolute calibration. In this study, we (1) evaluate the absolute radiometric performance of two commonly used UAS sensors: the Headwall Nano-Hyperspec hyperspectral sensor and the MicaSense RedEdge-MX Dual Camera multispectral system; (2) assess the effectiveness of the Empirical Line Method (ELM) in improving the radiometric accuracy of reflectance products generated by these sensors; and (3) investigate the influence of calibration target characteristics—including size, material type, reflectance intensity, and quantity—on the performance of ELM for UAS data. A field campaign was conducted jointly by the U.S. Geological Survey (USGS) Earth Resources Observation and Science (EROS) Center and the USGS National Uncrewed Systems Office (NUSO) from 15 to 18 July 2023, at the USGS EROS Ground Validation Radiometer (GVR) site in Sioux Falls, South Dakota, USA, over a 160 m × 160 m vegetated area. Absolute calibration accuracy was evaluated by comparing UAS sensor-derived reflectance to in situ measurements of the site. Results indicate that the Headwall Nano-Hyperspec and MicaSense sensors underestimated reflectance by approximately 0.05 and 0.015 reflectance units, respectively. While the MicaSense sensor demonstrated better inherent radiometric accuracy, it exhibited saturation over bright targets due to limitations in its automatic gain and exposure settings. Application of the ELM using just two calibration targets reduced discrepancies to within 0.005 reflectance units. Reflectance products generated using various target materials—such as felt, melamine, or commercially available validation targets—showed comparable agreement with in situ measurements when used with the Nano-Hyperspec sensor. Furthermore, increasing the number of calibration targets beyond two did not yield measurable improvements in calibration accuracy. At a flight altitude of 200 ft above ground level (AGL), a target size of 0.6 m × 0.6 m or larger was sufficient to provide pure pixels for ELM implementation, whereas smaller targets (e.g., 0.3 m × 0.3 m) posed challenges in isolating pure pixels. Overall, the standard manufacturer-recommended calibration procedures were insufficient for achieving high radiometric accuracy with the tested sensors, which may restrict their applicability in scenarios requiring greater accuracy and precision. The use of the ELM significantly improved data quality, enhancing the reliability and applicability of UAS-based remote sensing in contexts requiring high precision and accuracy.

Remote Sensing↗

USGS2025

The tortoise and the antilocaprid: Adapting GPS tracking and terrain data to model wildlife walking functions

Context The relationship between slope and terrestrial animal locomotion is key to landscape ecology but underexplored across species. This is partly due to a lack of scalable methodology that applies to a diversity of wildlife. Objectives This study investigates the slope-speed relationship for two species, Texas tortoise ( Gopherus berlandieri ) and pronghorn ( Antilocapra americana ), through the combined application of remote sensing, GPS tracking, behavior models, and parametric distribution. While using readily available Digital Elevation Models (DEM) for pronghorn, we explore the use of very high-resolution lidar Digital Terrain Models (DTM) from Unoccupied Aerial Systems (UAS) to characterize tortoise movements at micro-scales. Methods After classifying animal behavior with GPS tracking data and Hidden Markov Models (HMMs), we analyzed the relationship between the speed of the animals and the slope of the terrain using a 30-m DEM for pronghorn, and a fine-scale UAS DTM for Texas tortoise, and three nonlinear models: Laplace, Gauss, and Lorentz. Results High-resolution DTM, coupled with GPS tracking, accurately models the relationship of speed and slope at a micro-scale, while a DEM is suitable for a larger scale. Laplace models best predicted the speed of both the Texas tortoise and pronghorn. Models showed tortoises, which are not known for rapid and agile movement like the pronghorn, have a broader tolerance for varying slopes at a fine scale. Conclusions These findings enhance understanding of species-specific movement offering valuable insights for habitat management and conservation tailored to species’ behaviors and capabilities.

Colorado, Texas, Wyoming↗

USGS2025

Applications of unoccupied aerial systems (UAS) in landscape ecology: A review of recent research, challenges and emerging opportunities

Context Unoccupied aerial systems/vehicles (UAS/UAV, a.k.a. drones) have become an increasingly popular tool for ecological research. But much of the recent research is concerned with developing mapping and detection approaches, with few studies attempting to link UAS data to ecosystem processes and function. Landscape ecologists have long used high resolution imagery and spatial analyses to address ecological questions and are therefore uniquely positioned to advance UAS research for ecological applications. Objectives The review objectives are to: (1) provide background on how UAS are used in landscape ecological studies, (2) identify major advancements and research gaps, and (3) discuss ways to better facilitate the use of UAS in landscape ecology research. Methods We conducted a systematic review based on PRISMA guidelines using key search terms that are unique to landscape ecology research. We reviewed only papers that applied UAS data to investigate questions about ecological patterns, processes, or function. Results We summarize metadata from 161 papers that fit our review criteria. We highlight and discuss major research themes and applications, sensors and data collection techniques, image processing, feature extraction and spatial analysis, image fusion and satellite scaling, and open data and software. Conclusion We observed a diversity of UAS methods, applications, and creative spatial modeling and analysis approaches. Key aspects of UAS research in landscape ecology include modeling wildlife micro-habitats, scaling of ecosystem functions, landscape and geomorphic change detection, integrating UAS with historical aerial and satellite imagery, and novel applications of spatial statistics.

Landscape Ecology↗

USGS2025

Drone-based radiometric surveys provide high-resolution mine waste characterization

Airborne radiometric surveys use passive geophysical techniques to characterize geochemical variations at or near earth’s surface. These methods have been used for a variety of mapping applications, including mineral resource evaluation. However, detailed characterization of smaller geologic targets, including mine waste features, requires flying at lower altitudes and with tighter line spacing than is feasible with traditional aircraft. Here, a small uncrewed aircraft system (sUAS) equipped with a radiometric sensor was used to acquire high-resolution gamma-spectrometry over small mine waste features and a low-grade stockpile in southwestern New Mexico. The sUAS radiometric system mapped local variability within each survey area and revealed ~2–10 m wide zones where radioelements K, Th, and U may be elevated 2–10× the surrounding material. Additionally, the sUAS radiometric data revealed radioelement variability across survey sites, which correlated reasonably well with variability seen in geochemical samples at each survey site, even though samples collected from individual sites showed high local variability. The sUAS data characterized local heterogeneity within mine waste and other small geologic targets at scales of a few meters to tens of meters, which is not possible with traditional crewed aircraft, and with continuity of coverage that is not possible with ground surveys, thus filling a key gap in geophysical survey spatial resolution.

New Mexico↗

USGS2024

Hyperspectral Image Transects during Transient Events in Rivers (HITTER): Framework development and application to a tracer experiment on the Missouri River, USA

Rivers convey a broad range of materials, such as sediment, nutrients, and contaminants. Much of this transport can occur during or immediately after an episodic, pulsed event like a flood or an oil spill. Understanding the flow processes that influence the motion of these substances is important for managing water resources and conserving aquatic ecosystems. This study introduces a new remote sensing framework for characterizing dynamic phenomena at the scale of a channel cross-section: Hyperspectral Image Transects during Transient Events in Rivers (HITTER). We present a workflow that uses repeated hyperspectral scan lines acquired from a hovering uncrewed aircraft system (UAS) to quantify how a water attribute of interest varies laterally across the river and evolves over time. Data from a tracer experiment on the Missouri River are used to illustrate the components of the end-to-end processing chain we used to quantify the passage of a visible dye. The framework is intended to be flexible and could be applied in a number of different contexts. The results of this initial proof-of-concept investigation suggest that HITTER could potentially provide insight regarding the dispersion of a range of materials in rivers, which would facilitate ecological and geomorphic studies and help inform management.

Remote Sensing↗

USGS2020

Positional accuracy assessment of lidar point cloud from NAIP/3DEP pilot project

The Leica Geosystems CountryMapper hybrid system has the potential to collect data that satisfy the U.S. Geological Survey (USGS) National Geospatial Program (NGP) and 3D Elevation Program (3DEP) and the U.S. Department of Agriculture (USDA) National Agriculture Imagery Program (NAIP) requirements in a single collection. This research will help 3DEP determine if this sensor has the potential to meet current and future 3DEP topographic lidar collection requirements. We performed an accuracy analysis and assessment on the lidar point cloud produced from CountryMapper. The boresighting calibration and co-registration by georeferencing correction based on ground control points are assumed to be performed by the data provider. The scope of the accuracy assessment is to apply the following variety of ways to measure the accuracy of the delivered point cloud to obtain the error statistics. Intraswath uncertainty from a flat surface was computed to evaluate the point cloud precision. Intraswath difference between opposite scan directions and the interswath overlap difference were evaluated to find boresighting or any systematic errors. Absolute vertical accuracy over vegetated and non-vegetated areas were also assessed. Both horizontal and vertical absolute errors were assessed using the 3D absolute error analysis methodology of comparing conjugate points derived from geometric features. A three-plane feature makes a single unique intersection point. Intersection points were computed from ground-based lidar and airborne lidar point clouds for comparison. The difference between two intersection points form one error vector. The geometric feature-based error analysis was applied to intraswath, interswath, and absolute error analysis. The CountryMapper pilot data appear to satisfy the accuracy requirements suggested by the USGS lidar specification, based upon the error analysis results. The focus of this research was to demonstrate various conventional accuracy measures and novel 3D accuracy techniques using two different error computation methods on the CountryMapper airborne lidar point cloud.

Remote Sensing↗