Search USGS⌕ Search

Geology topics

Martin A. Briggs

Publications and source records attributed to Martin A. Briggs.

At least 37 records · Page 2Linked to original sources

Diel temperature signals track seasonal shifts in localized groundwater contributions to headwater streamflow generation at network scale

Groundwater contributions to streamflow sustain aquatic ecosystem resilience; streams without significant groundwater inputs often have well-coupled air and water temperatures that degrade cold-water habitat during warm low flow periods. Widespread uncertainty in stream-groundwater connectivity across space and time has created disparate predictions of energy and nutrient fluxes across headwater networks, hindering predictions of cold-water habitat resilience under climate change scenarios. Recently, annual paired air and water temperature signals have been harnessed to indicate stream water thermal sensitivity and the dominance of deep versus shallow groundwater influence, although the utility of diel air–water temperature signal metrics for hydrologic inference has remained unexplored. Here we analyzed two consecutive years of locally paired, air–water temperature data from 47 headwater stream sites in the Catskill Mountains, New York, USA, and discovered characteristic seasonal patterns in diel temperature signal sinusoid metrics (amplitude ratio, phase lag, and mean ratio) driven by shifts in streamflow generation mechanisms and stream network position. Hydrologic interpretations of observed patterns were supported by stream heat budget model scenarios and additional analysis of paired air–water temperature data from two streams in Shenandoah National Park, Virginia, USA, with well characterized stream-groundwater connectivity. We found that within smaller tributaries, streamflow generation transitions from runoff to groundwater dominance were driven by hillslope drying during seasonal periods of lower precipitation. This was evidenced by significant correlations (p < 0.01) between daily water:air temperature signal amplitudes (non-linear decreases of ∼ 50 %) and derived base-flow index at 22 of the 28 sites, indicating enhanced local groundwater influence on streamflow promotes decoupling of diel air–water temperature signals. Additionally, ratios between daily water:air temperature signal means were lower in tributaries (∼0.68) when compared to main-stem (∼0.8) sites, increasing linearly throughout the observational period. In conceptual stream heat budget models, groundwater inflow had minimal effects on daily phase lags (∼0.2 hr), but increases in fractional groundwater discharge (0–50 %) depressed daily amplitude (∼20 % to 50 %) and mean ratios (∼15 %), supporting the sensitivity of daily metrics to interpreted changes in seasonal groundwater contributions to streamflow. During observational periods (i.e., April through October 2021 and 2022), significant differences (p < 0.01) between tributary and main-stem air–water metrics occurred when base-flow contributions were highest (∼0.93 vs. ∼ 0.68), as sites lower in the network had daily temperature metrics dominated by stream channel thermal inertia, rather than local groundwater connectivity, showing enhanced air–water diel signal coupling during warmer, drier periods. Divergent air temperature coupling across the network was interpreted as being driven by distance from local groundwater source zones, additional lateral groundwater inflows do not contribute a meaningful fraction to channel discharge lower in the network. Given the growing footprint of stream temperature observations, diel air–water temperature signals can provide distributed metrics sensitive to upstream groundwater discharge. Consequently, these metrics can support ongoing efforts by resource managers and researchers seeking to forecast the resilience of cold-water habitat to climate warming and changing precipitation regimes in mountain headwater streams.

New York, Virginia↗

Groundwater-Surface water interactions research: Past trends and future directions

Interactions between groundwater and surface water sustain groundwater-dependent ecosystems and regulate river temperature and biogeochemical cycles, amongst many other processes. These interactions occur in freshwater environments including rivers, springs, lakes, and wetlands, and in coastal environments via tidal pumping, submarine groundwater discharge, and seawater intrusion. Here, we explore groundwater-surface water interactions research using bibliometric analyses of titles, abstracts, and keywords from 20,275 journal papers published between 1970 and 2023 extracted from Scopus. Analyses show that research into groundwater-surface water interactions is highly multi-disciplinary, with growing contributions from the social and biological sciences. The number of groundwater-surface water interactions papers is rapidly increasing with over 1200 papers published per year since 2020. Drawing on our data-driven approach and expert knowledge, we synthesise current research trends and identify critical future research directions. Despite the thousands of papers on groundwater-surface water interactions, important processes are still difficult to quantify or predict at meaningful spatial scales to inform water-resources management. We see benefits in future groundwater-surface water interactions research focusing on: (1) using new technologies including internet-of-things-based sensors, uncrewed vehicles, and remote-sensing approaches for data collection to inform groundwater-surface water interactions at large scales, (2) seeking approaches to upscale site-specific findings to better inform management, and (3) continuing the movement towards multi-disciplinary investigations to better inform the understanding of groundwater-surface water interactions and processes that will enable better management outcomes.

Journal of Hydrology↗

Methods for quantifying interactions between groundwater and surface water

Driven by the need for integrated management of groundwater (GW) and surface water (SW), quantification of GW–SW interactions and associated contaminant transport has become increasingly important. This is due to their substantial impact on water quantity and quality. In this review, we provide an overview of the methods developed over the past several decades to investigate GW–SW interactions. These methods include geophysical, hydrometric, and tracer techniques, as well as various modeling approaches. Different methods reveal valuable information on GW–SW interactions at different scales with their respective advantages and limitations. Interpreting data from these techniques can be challenging due to factors like scale effects, heterogeneous hydrogeological conditions, sediment variability, and complex spatiotemporal connections between GW and SW. To facilitate the selection of appropriate methods for specific sites, we discuss the strengths, weaknesses, and challenges of each technique, and we offer perspectives on knowledge gaps in the current science.

Annual Review of Environment and Resources↗

Geophysical identification of potential groundwater – surface water interactions in the Bonita Peak Mining District, San Juan County, Colorado

This report includes the results and interpretation of geophysical investigations to aid in the location, identification, and conceptual site model (CSM) development of the near surface groundwater and surface water hydrology of the Upper Cement Creek and California Gulch of the Animas Rivers within the Bonita Peak Mining Districts (BPMD). Mine influenced water (MIW) from numerous mine adits within the BPMD has altered the geochemistry and ecology of these ground and surface waters. Many studies of varying scales have investigated the geology, hydrogeology, geochemistry, and aqueous chemistry of these adits and impacted areas. Field investigations using non-invasive geophysical methods were conducted in the summer of 2019 to aid in identifying potential groundwater inputs to these streams and further the CSM of the near surface within and along these streams. Two field deployments were completed in August and September of 2019. In August 2019, Phase 1 was completed using multifrequency electromagnetic induction (EMI) and thermal infrared imaging (TIR) to measure the bulk electrical conductivity, magnetic susceptibility, and the temperature response at known and suspected groundwater seeps into the Upper Cement Creek and California Gulch stretches of these alpine streams. Results and interpretation from Phase 1 were used to co-locate stretches of these streams for further detailed fiber optic distributed temperature system (FODTS) monitoring of the temperature dynamics for submeter identification of potential groundwater seeps during Phase 2. Phase 2 included additional EMI measurements, FODTS measurements, and repeated some Phase 1 measurements for improved data quality. All these data were used for the combined qualitative interpretation identifying seep locations. The data from both Phase 1 and Phase 2 are available in the USGS data release at: https://www.sciencebase.gov/catalog/item/5f18a30082cef313ed84879b. These data include detailed near-surface electrical conductivity and magnetic susceptibility mapping, discrete TIR imaging, and several kilometers of FODTS data. These data were georeferenced and used to identify potential groundwater seeps into these streams. The results indicate a complex near surface geophysical and hydrogeologic regime. Seeps are classified and spatially correlated to the EMI, TIR, and geochemical sampling results. This report is a thorough compilation of the geophysical field efforts in the summer of 2019, the data processing, and interpretations of these data. These data alone should not be used for final interpretations of the complex hydrogeology within these alpine systems. Rather, these data should be combined with other known data from various investigations to further refine the CSM and guide decisions for future investigations, watershed protective measures, and other site decisions. Geographical information system (GIS) layers of these results are available to project managers for such integration and combined interpretations.

Colorado↗

Where the past meets the present: Connecting nitrogen from watersheds to streams through groundwater flowpaths

Groundwater discharge to streams is a nonpoint source of nitrogen (N) that confounds N mitigation efforts and represents a significant portion of the annual N loading to watersheds. However, we lack an understanding of where and how much groundwater N enters streams and watersheds. Nitrogen concentrations at the end of groundwater flowpaths are the culmination of biogeochemical and physical processes from the contributing land area where groundwater recharges, within the aquifer system, and in the near-stream riparian area where groundwater discharges to streams. Our research objectives were to quantify the spatial distribution of N concentrations at groundwater discharges throughout a mixed land-use watershed and to evaluate how relationships among contributing and riparian land cover, modeled aquifer characteristics, and groundwater discharge biogeochemistry explain the spatial variation in groundwater discharge N concentrations. We accomplished this by integrating high-resolution thermal infrared surveys to locate groundwater discharge, biogeochemical sampling of groundwater, and a particle tracking model that links groundwater discharge locations to their contributing area land cover. Groundwater N loading from groundwater discharges within the watershed varied substantially between and within streambank groundwater discharge features. Groundwater nitrate concentrations were spatially heterogeneous ranging from below 0.03–11.45 mg-N/L, varying up to 20-fold within meters. When combined with the particle tracking model results and land cover metrics, we found that groundwater discharge nitrate concentrations were best predicted by a linear mixed-effect model that explained over 60% of the variation in nitrate concentrations, including aquifer chemistry (dissolved oxygen, Cl − , SO 4 2− ), riparian area forested land cover, and modeled physical aquifer characteristics (discharge, Euclidean distance). Our work highlights the significant spatial variability in groundwater discharge nitrate concentrations within mixed land-use watersheds and the need to understand groundwater N processing across the many spatiotemporal scales within groundwater cycling.

Connecticut↗

Shallow and local or deep and regional? Inferring source groundwater characteristics across mainstem riverbank discharge faces

Riverbank groundwater discharge faces are spatially extensive areas of preferential seepage that are exposed to air at low river flow. Some conceptual hydrologic models indicate discharge faces represent the spatial convergence of highly variable age and length groundwater flowpaths, while others indicate greater consistency in source groundwater characteristics. Our detailed field investigation of preferential discharge points nested across mainstem riverbank discharge faces was accomplished by: (1) leveraging new temperature-based recursive estimation (extended Kalman Filter) modelling methodology to evaluate seasonal, diurnal, and event-driven groundwater flux patterns, (2) developing a multi-parameter toolkit based on readily measured attributes to classify the general source groundwater flowpath depth and flowpath length scale, and, (3) assessing whether preferential flow points across discharge faces tend to represent common or convergent groundwater sources. Five major groundwater discharge faces were mapped along the Farmington River, CT, United States using thermal infrared imagery. We then installed vertical temperature profilers directly into 39 preferential discharge points for 4.5 months to track vertical discharge flux patterns. Monthly water chemistry was also collected at the discharge points along with one spatial synoptic of stable isotopes of water and dissolved radon gas. We found pervasive evidence of shallow groundwater sources at the upstream discharge faces along a wide valley section with deep bedrock, as primarily evidenced by pronounced diurnal discharge flux patterns. Discharge flux seasonal trends and bank storage transitions during large river flow events provided further indication of shallow, local sources. In contrast, downstream discharge faces associated with near surface cross cutting bedrock exhibited deep and regional source flowpath characteristics such as more stable discharge patterns and temperatures. However, many neighbouring points across discharge faces had similar discharge flux patterns that differed in chloride and radon concentrations, indicating the additional effects of localized flowpath heterogeneity overprinting on larger scale flowpath characteristics.

Connecticut↗

Closing the gap between science and management of cold-water refuges in rivers and streams

Human activities and climate change threaten coldwater organisms in freshwater ecosystems by causing rivers and streams to warm, increasing the intensity and frequency of warm temperature events, and reducing thermal heterogeneity. Cold-water refuges are discrete patches of relatively cool water that are used by coldwater organisms for thermal relief and short-term survival. Globally, cohesive management approaches are needed that consider interlinked physical, biological, and social factors of cold-water refuges. We review current understanding of cold-water refuges, identify gaps between science and management, and evaluate policies aimed at protecting thermally sensitive species. Existing policies include designating cold-water habitats, restricting fishing during warm periods, and implementing threshold temperature standards or guidelines. However, these policies are rare and uncoordinated across spatial scales and often do not consider input from Indigenous peoples. We propose that cold-water refuges be managed as distinct operational landscape units, which provide a social and ecological context that is relevant at the watershed scale. These operational landscape units provide the foundation for an integrated framework that links science and management by (1) mapping and characterizing cold-water refuges to prioritize management and conservation actions, (2) leveraging existing and new policies, (3) improving coordination across jurisdictions, and (4) implementing adaptive management practices across scales. Our findings show that while there are many opportunities for scientific advancement, the current state of the sciences is sufficient to inform policy and management. Our proposed framework provides a path forward for managing and protecting cold-water refuges using existing and new policies to protect coldwater organisms in the face of global change.

Global Change Biology↗

Stabilising effects of karstic groundwater on stream fish communities

Although groundwater exchange processes are known to modulate atmospheric influences on stream temperature and flow, the implications for ecological stability are poorly understood. Here, we evaluated temporal change in stream fish communities across a gradient of groundwater influence defined by karst terrain (carbonate parent materials) within the Potomac River basin of eastern North America. We surveyed 12 sites in 2022 that had been sampled 29–30 years previously with similar methods. We also collected stream temperature data from each site and used the regression slope of the air-water temperature relationship to index stream thermal sensitivity and groundwater exchange processes. Sites in karst terrain exhibited strong groundwater controls on stream temperature, and fish communities were more stable over time in these locations than elsewhere. However, stream thermal sensitivity was a stronger predictor of species persistence than the spatial distribution of karst terrain in contributing areas, highlighting the ecological importance of local variation in groundwater discharge processes. The presence of calcium precipitates (marl) in stream substrates was associated with low thermal sensitivity and ecological stability over time, and we suggest such visible features may be a useful indicator of climate change refugia in stream ecosystems.

Ecology of Freshwater Fish↗

Interaction of a legacy groundwater contaminant plume with the Little Wind River from 2015 through 2017, Riverton Processing site, Wyoming

The Riverton Processing site was a uranium mill 4 kilometers southwest of Riverton, Wyoming, that prepared uranium ore for nuclear reactors and weapons from 1958 to 1963. The U.S. Department of Energy completed surface remediation of the uranium tailings in 1989; however, groundwater below and downgradient from the tailings site and nearby Little Wind River was not remediated. Beginning in 2010, a series of floods along the Little Wind River began to mobilize contaminants in the unsaturated zone, resulting in substantial increases of uranium and other contaminants of concern in monitoring wells completed inside the contaminant plume. In 2011, the U.S. Department of Energy started a series of university and Government agency retrospective and field investigations to understand the processes controlling contaminant increases in the groundwater plume. The goals of the field investigations described in this report were to (1) identify and quantify the contaminant flux and potential associated biological effects from groundwater associated with the legacy plume as it enters a perennial stream reach, and (2) assess chemical exposure and potential effects to biological receptors from the interaction of the contaminant plume and the river. Field investigations along the Little Wind River were completed by the U.S. Geological Survey during 2015–17 in cooperation with the U.S. Department of Energy Office of Legacy Management to characterize: (1) seepage areas and seepage rates; (2) pore-water and bed sediment chemistry and hyporheic exchange and reactive loss; and (3) exposure pathways and biological receptors. All data collected during the study are contained in two U.S. Geological Survey data releases, available at https://doi.org/10.5066/F7BR8QX4 and https://doi.org/10.5066/P9J9VJBR . A variety of tools and methods were used during the field characterizations. Streambed temperature mapping, electrical resistivity tomography, electromagnetic induction, fiber-optic distributed temperature sensing, tube seepage meters, vertical thermal sensor arrays, and an environmental tracer (radon) were used to identify areas of groundwater seepage and associated seepage rates along specific sections of the study reach of the river. Drive points, minipiezometers, diffusive equilibrium in thin-film/diffusive gradients in thin-film probes, bed-sediment samples, and equal discharge increment sampling methods were used to characterize pore-water chemistry, estimate hyporheic exchange and reactive loss of selected chemical constituents, and quantify contaminant loadings entering the study reach. Sampling and analysis of surface sediments, filamentous algae, periphytic algae, and macroinvertebrates were used to characterize biological exposure pathways, metal uptake, and receptors. Areas of focused groundwater discharge identified by the fiber-optic distributed temperature sensing surveys corresponded closely with areas of elevated electrical conductivity identified by the electromagnetic induction survey results in the top 5 meters of sediment. During three monitoring periods in 2016, the mean vertical seepage rate measured with tube seepage meters was 0.45 meter per day, ranging from −0.02 to 1.55 meters per day. Five of the 11 locations where vertical thermal profile data were collected along the study reach during August 2017 indicated mean upwelling values ranging from 0.11 to 0.23 meter per day. Radon data collected from the Little Wind River during June, July, and August 2016 indicated a consistent inflow of groundwater to the central part of the study reach, in the area congruous with the center of the previously mapped groundwater plume discharge zone. During August 2017, the greatest attenuation of uranium from reactive loss in pore-water samples was observed at three locations along the study reach, at depths between 6 and 15 centimeters, and similar trends in molybdenum attenuation were also observed. Bed-sediment concentration profiles collected during 2017 also indicated attenuation of uranium and molybdenum from groundwater during hyporheic mixing of surface water with the legacy plume during groundwater upwelling into the river. Streamflow measurements combined with equal discharge increment water sampling along the study reach indicated an increase in dissolved uranium concentrations in the downstream direction during 2016 and 2017. Net uranium load entering the Little Wind River study reach was about 290 and 435 grams per day during 2016 and 2017, respectively. Biological samples indicated that low levels of uranium and molybdenum exposure were confined to the benthos in the Little Wind River within and immediately downstream from the perimeter of the groundwater plume. Concentrations of molybdenum and uranium in filamentous algae were consistently low at all sites in the study reach with no indication of increased exposure of dissolved bioavailable molybdenum or uranium at sites next to or downstream from the groundwater plume. Comparison of the August 2017 results from electromagnetic induction, tube seepage meters, vertical thermal profiling, and pore-water chemistry surveys were in general agreement in identifying areas with upwelling groundwater conditions along the study reach. However, the electroconductivity values measured with electromagnetic induction in the top 100 centimeters of sediment did not agree with sodium concentrations measured in pore-water samples collected at similar streambed depths. Differences and similarities between multiple methods can result in additional insights into hydrologic and biogeochemical processes that may be occurring along a reach of a river system interacting with shallow groundwater inputs. It may be advantageous to apply a variety of geophysical, geochemical, hydrologic, and biological tools at other Uranium Mill Tailings Remedial Action ( https://www.energy.gov/sites/prod/files/2014/10/f19/UMTRCA.pdf ) sites during the investigation of legacy contaminant plume interactions with surface-water systems.

Wyoming↗

Wildfire-induced shifts in groundwater discharge to streams identified with paired air and stream water temperature analyses

Within the western United States, increasingly severe and frequent wildfires may alter the magnitude, timing, and quality of water exported from burned areas by streams. Post-fire hydrologic studies often focus on peak stream flow responses to shifts in runoff generation or on annual streamflow yield response to changes in evapotranspiration following fire. However, the magnitude and duration of wildfire effects on groundwater recharge, changes in subsurface routing, and consequences for stream low flows sourced predominately by baseflow are poorly understood. Here, we demonstrate an approach using the amplitude and phase of paired annual air and stream water temperature signals to broadly identify changes in watershed subsurface flow contributions after fire. Watersheds were classified using pre-fire temperature data, as having air-coupled (i.e., reduced apparent groundwater signature), deep groundwater, or shallow groundwater stream temperature signals. Changes in pre- and post-fire paired air and stream water temperature metrics were compared for locations (n = 17) spanning a large range of physiographic and climatic conditions across the western United States. Pre- and post-fire comparisons were computed by quantile using bootstrapped confidence intervals (ci = 95), as well as in aggregate using Kruskal-Wallis and post-hoc Dunn tests. Statistical comparisons of pre- and post-fire temperature metrics suggest that overall, watersheds classified as having minimal groundwater influence are the most likely to experience fire-induced subsurface hydrologic change. More specifically, watersheds classified as having air-coupled or shallow groundwater signals experienced increases in the magnitude of groundwater discharge, with more stable annual thermal regimes post-fire that are less-coupled to ambient air temperature. These findings form the basis of a conceptual framework for watershed resistance to subsurface hydrologic change following fire that can be broadly applied as a first approximation for water management, impacts on aquatic habitat, and post-wildfire response planning.

California, Idaho, Oregon, Washington↗

A multiscale approach for monitoring groundwater discharge to headwater streams by the U.S. Geological Survey Next Generation Water Observing System Program—An example from the Neversink Reservoir watershed, New York

Groundwater-stream connectivity across mountain watersheds is critical for supporting streamflow during dry times and keeping streams cool during warm times, yet U.S. Geological Survey (USGS) stream measurements are often sparse in headwaters. Starting in 2019, the USGS Next Generation Water Observing System Program developed a multiscale methods and technology testbed approach to monitoring groundwater discharge to streams in the Neversink Reservoir watershed in the Catskill Mountains of New York. Groundwater discharge dynamics are complex across space and time because of geographic variability, topography, and preferential groundwater flow patterns, and the monitoring of discharge processes necessitates an innovative approach that includes emerging water tracing methods and enhanced local geologic mapping. This fact sheet describes the multiscale monitoring approach applied in the Neversink Reservoir watershed and specifically how the varied data types are complimentary in understanding groundwater-stream connectivity, with elements transferable to other mountain watersheds.

New York↗

Bedrock depth influences spatial patterns of summer baseflow, temperature and flow disconnection for mountainous headwater streams

In mountain headwater streams, the quality and resilience of summer cold-water habitat is generally regulated by stream discharge, longitudinal stream channel connectivity and groundwater exchange. These critical hydrologic processes are thought to be influenced by the stream corridor bedrock contact depth (sediment thickness), a parameter often inferred from sparse hillslope borehole information, piezometer refusal and remotely sensed data. To investigate how local bedrock depth might control summer stream temperature and channel disconnection (dewatering) patterns, we measured stream corridor bedrock depth by collecting and interpreting 191 passive seismic datasets along eight headwater streams in Shenandoah National Park (Virginia, USA). In addition, we used multi-year stream temperature and streamflow records to calculate several baseflow-related metrics along and among the study streams. Finally, comprehensive visual surveys of stream channel dewatering were conducted in 2016, 2019 and 2021 during summer low flow conditions (124 total km of stream length). We found that measured bedrock depths along the study streams were not well-characterized by soils maps or an existing global-scale geologic dataset where the latter overpredicted measured depths by 12.2 m (mean) or approximately four times the average bedrock depth of 2.9 m. Half of the eight study stream corridors had an average bedrock depth of less than 2 m. Of the eight study streams, Staunton River had the deepest average bedrock depth (3.4 m), the coldest summer temperature profiles and substantially higher summer baseflow indices compared to the other study steams. Staunton River also exhibited paired air and water annual temperature signals suggesting deeper groundwater influence, and the stream channel did not dewater in lower sections during any baseflow survey. In contrast, Paine Run and Piney River did show pronounced, patchy channel dewatering, with Paine Run having dozens of discrete dry channel sections ranging from 1 to greater than 300 m in length. Stream dewatering patterns were apparently influenced by a combination of discrete deep bedrock (20+ m) features and more subtle sediment thickness variation (1–4 m) depending on local stream valley hydrogeology. In combination, these unique datasets show the first large-scale empirical support for existing conceptual models of headwater stream disconnection based on spatially variable underflow capacity and shallow groundwater supply.

Virginia↗

Application of recursive estimation to heat tracing for groundwater/surface-water exchange

We present and demonstrate a recursive-estimation framework to infer groundwater/surface-water exchange based on temperature time series collected at different vertical depths below the sediment/water interface. We formulate the heat-transport problem as a state-space model (SSM), in which the spatial derivatives in the convection/conduction equation are approximated using finite differences. The SSM is calibrated to estimate time-varying specific discharge using the Extended Kalman Filter (EKF) and Extended Rauch-Tung-Striebel Smoother (ERTSS). Whereas the EKF is suited to real-time (“online”) applications and uses only the past and current measurements for estimation (filtering), the ERTSS is intended for near-real time or batch-processing (“offline”) applications and uses a window of data for batch estimation (smoothing). The two algorithms are demonstrated with synthetic and field-experimental data and are shown to be efficient and rapid for the estimation of time-varying flux over seasonal periods; further, the recursive approaches are effective in the presence of rapidly changing flux and (or) nonperiodic thermal boundary conditions, both of which are problematic for existing approaches to heat tracing of time-varying groundwater/surface-water exchange.

Water Resources Research↗

Hot spots and hot moments in the Critical Zone: Identification of and incorporation into reactive transport models

Biogeochemical processes are often spatially discrete (hot spots) and temporally isolated (hot moments) due to variability in controlling factors like hydrologic fluxes, lithological characteristics, bio-geomorphic features, and external forcing. Although these hot spots and hot moments (HSHMs) account for a high percentage of carbon, nitrogen and nutrient cycling within the Critical Zone, the ability to identify and incorporate them into reactive transport models remains a significant challenge. This chapter provides an overview of the hot spots hot moments (HSHMs) concepts, where past work has largely focused on carbon and nitrogen dynamics within riverine systems. This work is summarized in the context of process-based and data-driven modeling approaches, including a brief description of recent research that casts a wider net to incorporate Hg, Fe and other Critical Zone elements, and focuses on interdisciplinary approaches and concepts. The broader goal of this chapter is to provide an overview of the gaps in our current understanding of HSHMs, and the opportunities therein, while specifically focusing on the underlying parameters and processes leading to their prognostic and diagnostic representation in reactive transport models.

Book chapter↗

Using ensemble data assimilation to estimate transient hydrologic exchange flow under highly dynamic flow conditions

Quantifying dynamic hydrologic exchange flows (HEFs) within river corridors that experience high-frequency flow variations caused by dam regulations is important for understanding the biogeochemical processes at the river water and groundwater interfaces. Heat has been widely used as a tracer to infer steady-state flow velocities through analytical solutions of heat transport defined by the diurnal temperature signals. Under sub-daily dynamic flow conditions, however, such analytical solutions are not applicable due to the violation of their fundamental assumptions. In this study, we developed a data assimilation-based approach to estimate the sub-daily flux under highly dynamic flow conditions using multi-depth temperature observations at a 5-min resolution. If the hydraulic gradient is measured, Darcy's law was used to calculate the flux with permeability estimated from temperature responses below the riverbed. Otherwise, flux was estimated directly by assimilating multi-depth temperature data at 1- or 2-hr time intervals assuming one-dimensional flow and heat transport governing equation. By comparing estimated fluxes with model-generated synthetic truth, we demonstrated that both schemes have robust performance in estimating fluxes under highly dynamic flow conditions. This data assimilation-based flux estimation method was able to capture the vertical sub-daily fluxes using multi-depth high-resolution temperature data alone, even in the presence of multi-dimensional flow. This approach has been successfully applied to real field temperature data collected at the Hanford site, which experiences highly dynamic HEFs. Our study shows the promise of adopting distributed 1-D temperature monitoring to capture spatial and temporal exchange dynamics in river corridors at a watershed scale or beyond.

Washington↗

GW/SW-MST: A groundwater/surface-water method selection tool

Groundwater/surface-water (GW/SW) exchange and hyporheic processes are topics receiving increasing attention from the hydrologic community. Hydraulic, chemical, temperature, geophysical, and remote sensing methods are used to achieve various goals (e.g., inference of GW/SW exchange, mapping of bed materials, etc.), but the application of these methods is constrained by site conditions such as water depth, specific conductance, bed material, and other factors. Researchers and environmental professionals working on GW/SW problems come from diverse fields and rarely have expertise in all available field methods; hence there is a need for guidance to design field campaigns and select methods that both contribute to study goals and are likely to work under site-specific conditions. Here, we present the spreadsheet-based GW/SW-Method Selection Tool (GW/SW-MST) to help practitioners identify methods for use in GW/SW and hyporheic studies. The GW/SW-MST is a Microsoft Excel-based decision support tool in which the user selects answers to questions about GW/SW-related study goals and site parameters and characteristics. Based on user input, the tool indicates which methods from a toolbox of 32 methods could potentially contribute to achieving the specified goals at the site described.

Groundwater↗

Near-surface geophysics perspectives on Integrated, Coordinated, Open, Networked (ICON) Science

Pointing to the Integrated, Coordinated, Open, Networked Findability, Accessibility, Interoperability, and Reusability (ICON-FAIR) principles, we have determined several opportunities for implementation within the realm of near-surface geophysics (NSG), representing a broad range of data acquisition and processing technologies. Our work explores the multifaceted community-driven nature of NSG and, by applying ICON-FAIR principles, we identify three key strategic objectives: (i) the development of an approach to integrating NSG into other geoscience data collection projects, (ii) the creation of coordinated and open standardized NSG data, and (iii) the networking of post-secondary institutions to foster an equipment sharing consortium. The precedence within the geoscientific community demonstrates that there are significant opportunities for advancing interdisciplinary applications of NSG through the implementation of structural change within the ICON-FAIR framework.

Earth and Space Science↗

Where groundwater seeps: Evaluating modeled groundwater discharge patterns with thermal infrared surveys at the river-network scale

Predicting baseflow dynamics, protecting aquatic habitat, and managing legacy contaminants requires explicit characterization and prediction of groundwater discharge patterns throughout river networks. Using handheld thermal infrared (TIR) cameras, we surveyed 47 km of stream length across the Farmington River watershed (1,570 km 2 ; CT and MA, USA), mapping locations of bank and waterline groundwater discharges based on their thermal signature. Using the observed groundwater discharge locations and predicted groundwater discharge rates from 6 variations of a numerical groundwater-flow model (MODFLOW-NWT), we compared 1) predicted groundwater-discharge rates in areas with and without observed groundwater discharge, 2) spatial patterns of observed and predicted groundwater discharge locations, and 3) density of observed groundwater discharge locations with predicted discharge rates. Five of six models reasonably predicted the spatial patterns of discharge locations along the 5th order mainstem, but fewer models predicted groundwater discharge patterns in smaller streams. Our results highlight 1) the feasibility of using TIR observations to evaluate groundwater models, 2) model parameters that influence discharge prediction accuracy (riverbed sediment and bedrock hydraulic conductivity and river-aquifer connections), and 3) current strengths and future opportunities for improved modeling of groundwater-discharge patterns.

Connecticut, Massachusetts↗