Search USGS⌕ Search

Geology topics

Margaret E. Landis

Publications and source records attributed to Margaret E. Landis.

11 recordsLinked to original sources

Lunar-VISE landing site selection and characterization at Mons Gruithuisen Gamma

The Lunar Vulkan Imaging and Spectroscopy Explorer (Lunar-VISE) was selected for a Commercial Lunar Payload Services (CLPS) delivery to the Gruithuisen domes region of the Moon as part of NASA’s Payloads and Research Investigation on the Surface of the Moon (PRISM) program. The Gruithuisen domes are chemically and morphologically distinct from their surroundings with a thorium-rich, silicic composition. The Lunar-VISE instrument payload is designed to investigate the compositional and thermophysical properties of dome materials in order to understand how late-stage silicic volcanism occurred on the Moon. Selection of a landing site required balancing science and exploration goals with the safety requirements for landing and rover trafficability. Science required access to boulders, potential exposures of bedrock, and if possible, rover access to the dome edge to enable observations of the surrounding maria. Safety considerations included landing hazards, maintenance of line-of-sight communications between the lander and rover, and any early morning or late afternoon shadows that would limit the mission duration. After consideration of several candidate landing sites, a 100-meter diameter landing ellipse centered on 36.45715° N, 319.20398° E, was selected near the edge of a topographic step and blocky ejecta crater (recently named Mareta) near the summit of Mons Gruithuisen Gamma. This location enables access to a field of boulders excavated by a relatively fresh impact providing a diversity of boulders for investigations, as well as views to the surrounding mare and Mons Gruithuisen Delta dome off of the dome edge via only a short rover traverse outside the landing ellipse (traverse < 100 m) while meeting safety requirements in accord with the CLPS risk posture.

Planetary Science Journal↗

Morphometric properties of the CP-21 landing site on the Moon at Mons Gruithuisen Gamma

Characterizing terrain surface properties is an essential step in assessing the feasibility of landing successfully at a location on a planetary surface. Slopes and terrain ruggedness index (TRI) values derived from high-resolution (2 m pixel −1 ) digital terrain models provided important constraints in selecting the landing site for the upcoming Payloads and Research Investigations on the Surface of the Moon program as part of the Commercial Lunar Payload Services task order CP-21 mission. The selected landing site needed to balance safety requirements with the ability to achieve the science and exploration goals of the Lunar Vulkan Imaging and Spectroscopy Explorer payload. In this study, we compare several morphometric parameters in the context of the CP-21 landing site on Mons Gruithuisen Gamma, or the Gamma dome, and quantify the information they convey about lunar surface properties to assess their utility for future landing site evaluation. TRI was found to be a useful metric for assessing landing site safety. Metrics that better decouple slope and surface roughness, the vector ruggedness measure and the standard deviation of slope, provided additional information about surface characteristics and textures such as the degree to which roughness is isotropic.

Planetary Science Journal↗

Lunar analog study using portable gamma-ray neutron detector: Radiochemical mapping of silicic-to-basaltic volcanic terrains in the San Francisco Volcanic Field, Arizona

Studying lunar silicic volcanism provides key insights into the Moon’s crustal evolution, magmatic processes, and volcanic history. The Lunar-VISE (Lunar Vulkan Imaging and Spectroscopy Explorer) mission will investigate the Gruithuisen domes, a unique lunar region hypothesized to have formed through silicic volcanism. Using instruments on a Firefly Aerospace lander and a Honeybee Robotics rover, Lunar-VISE will analyze mineralogy, geochemistry, and surface properties to determine the origin and evolution of the domes, with a gamma-ray and neutron spectrometer (LV-GRNS) among its payload instruments. In preparation for this mission, we conducted preliminary fieldwork using a handheld gamma-ray neutron detector with NaI(Tl) and Cs LiYCl :Ce (CLYC) scintillators. This study focuses on various rhyolitic and basaltic volcanic centers in the San Francisco Volcanic Field (SFVF) near Flagstaff, Arizona—specifically Sugarloaf Peak, Bonito Lava Flow, and Robinson Mountain, a region containing several well-characterized lunar analog sites. The SFVF was selected for this study due to its broad compositional diversity spanning basaltic to rhyolitic compositions, its well-preserved volcanic morphologies, and its extensive use in previous NASA field campaigns and astronaut training exercises, making it an ideal terrestrial laboratory for testing planetary exploration techniques. We measured natural radioactivity, specifically from potassium (K), thorium (Th), and uranium (U) and other elements in their decay chains, which serve as diagnostic tracers of magmatic differentiation and crustal evolution processes, to assess geochemical variability across compositionally diverse terrains. The detector’s sensitivity was assessed across varying concentration levels. Regionally averaged concentrations of radioisotopes were determined by gamma-ray spectroscopy at selected sites. Our measurements reveal significant compositional variations between sites, with Sugarloaf Peak (rhyolitic, silicic dome) exhibiting the highest average radioisotope concentrations (K: 3.29 ± 0.24 wt%, U: 14.35 ± 1.81 ppm, Th: 27.14 ± 2.43 ppm), while Bonito Lava Flow (K: 1.13 ± 0.08 wt%, U: 3.86 ± 0.52 ppm, Th: 7.52 ± 1.02 ppm), and Robinson Mountain (K: 1.46 ± 0.16 wt%, U: 5.59 ± 1.06 ppm, Th: 11.75 ± 1.98 ppm) show lower concentrations aligned with basaltic compositions. Gamma-ray fluxes were elevated by a factor of approximately three to four at Sugarloaf Peak relative to nearby basaltic terrains, consistent with expected geochemical differentiation patterns. Furthermore, at meter scales, proximity to geological features significantly affects measurements. Th concentrations adjacent to a cliff face at Sugarloaf’s base were 28% higher than values measured 3-5 meters away from the same feature, demonstrating localized compositional heterogeneity. Analysis of station-by-station measurements reveals that K, U, and Th concentrations show an elevation trend at Robinson Mountain and generally higher concentrations near Sugarloaf Peak’s summit, suggesting progressive magmatic differentiation and/or the presence of more evolved lithologies at higher elevations. By mapping these elements on Earth using GRNS, we aim to optimize measurement techniques for Lunar-VISE and similar rover-borne missions by demonstrating the applicability of portable GRNS instruments for planetary surface exploration in an analog environment.

Arizona↗

Polar science results from Mars Reconnaissance Orbiter: Multiwavelength, multiyear insights

Mars Reconnaissance Orbiter (MRO), with its arrival in 2006 and nearly continuous operation since, has provided data for the study of martian polar processes spanning nine Mars years. Mars' polar deposits have long been thought to preserve records of past climates, potentially readable like terrestrial ice cores. However, unraveling millions of years of history in the ice depends on understanding Mars' current and recent-past climate, including the interactions of atmospheric and surface processes . MRO has allowed for revolutionary discoveries, long-term monitoring of ongoing processes, and multiple complementary datasets to address the question of how the polar ice deposits reflect climatological changes. In part, MRO has been able to do this from its variety of instrumentation simultaneously observing interannual changes in geomorphology of the surface in up to ∼25 cm/pixel detail, repeatable processes and changes in the atmosphere, and surface composition, as well as investigating signs of past changes recorded in the icy polar layered deposits. In this paper, we summarize the contribution of MRO to our current understanding of Mars polar science, and in particular how MRO's long-duration mission has improved our understanding of the fundamental volatile cycles on Mars.

Icarus↗

New, dated small impacts on the South Polar Layered Deposits (SPLD), Mars, and implications for shallow subsurface properties

The Mars Reconnaissance Orbiter (MRO) Context Camera (CTX) imaged two newly formed impact craters on the South Polar Layered Deposits (SPLD) of Mars in 2018 and 2020. These two new craters, the first detected on the SPLD, measure ∼17 m and ∼48 m in diameter. Follow-up observations were conducted with the High Resolution Imaging Science Experiment (HiRISE), showing seasonal and interannual changes, and providing stereo coverage for the production of digital terrain models (DTMs). Mars Climate Sounder (MCS) data were obtained over the region of these new impacts, giving surface temperature information for the time interval before and after the impacts were detected. Taken together, the optical and infrared observations of these sites reveal craters largely consistent with the morphologies of other small, dated impact craters on Mars, and crater ejecta patterns that suggest a more dust/regolith-dominated upper few meters of the SPLD in contrast to mid-latitude buried ice and lobate debris aprons (LDAs). This supports previous conclusions that the SPLD may have an upper surface depleted in water ice relative to the North PLDs, possibly the result of a widespread deflation event.

Icarus↗

Planetary caves: A Solar System view of processes and products

We provide the first solar system wide compendium of speleogenic processes and products. An examination of 15 solar system bodies revealed that six cave-forming processes occur beyond Earth including volcanic (cryo and magmatic), fracturing (tectonic and impact melt), dissolution, sublimation, suffusion, and landslides. Although no caves (i.e., confirmed entrances with associated linear passages) have been confirmed, 3,545 SAPs (subsurface access points) have been identified on 11 planetary bodies and the potential for speleogenic processes (and thus SAPs) was observed on an additional four planetary bodies. The bulk of our knowledge on extraterrestrial SAPs is based upon global databases for the Moon and Mars, which are bodies for which high-resolution imagery and other data are available. To further characterize most of the features beyond the Moon and Mars, acquisition (preferably global coverage) and subsequent analysis of high-resolution imagery will be required. The next few decades hold considerable promise for identifying and potentially characterizing caves across the solar system.

JGR Planets↗

Revealing active Mars with HiRISE digital terrain models

Many discoveries of active surface processes on Mars have been made due to the availability of repeat high-resolution images from the High Resolution Imaging Science Experiment (HiRISE) onboard the Mars Reconnaissance Orbiter. HiRISE stereo images are used to make digital terrain models (DTMs) and orthorectified images (orthoimages). HiRISE DTMs and orthoimage time series have been crucial for advancing the study of active processes such as recurring slope lineae, dune migration, gully activity, and polar processes. We describe the process of making HiRISE DTMs, orthoimage time series, DTM mosaics, and the difference of DTMs, specifically using the ISIS/SOCET Set workflow. HiRISE DTMs are produced at a 1 and 2 m ground sample distance, with a corresponding estimated vertical precision of tens of cm and ∼1 m, respectively. To date, more than 6000 stereo pairs have been acquired by HiRISE and, of these, more than 800 DTMs and 2700 orthoimages have been produced and made available to the public via the Planetary Data System. The intended audiences of this paper are producers, as well as users, of HiRISE DTMs and orthoimages. We discuss the factors that determine the effective resolution, as well as the quality, precision, and accuracy of HiRISE DTMs, and provide examples of their use in time series analyses of active surface processes on Mars.

Remote Sensing↗

Active Mars: A dynamic world

Mars exhibits diverse surface changes at all latitudes and all seasons. Active processes include impact cratering, aeolian sand and dust transport, a variety of slope processes, changes in polar ices, and diverse effects of seasonal CO 2 frost. The extent of surface change has been surprising and indicates that the present climate is capable of reshaping the surface. Activity has important implications for the Amazonian history of Mars: understanding processes is a necessary step before we can understand their implications and variations over time.

Journal of Geophysical Research: Planets↗

Widespread exposures of extensive clean shallow ice in the mid-latitudes of Mars

Although ice in the Martian midlatitudes is typically covered by a layer of dust or regolith, it is exposed in some locations by fresh impact craters or in erosional scarps. In both cases, the exposed ice is massive or excess ice with a low lithic content. We find that erosional scarps occur between 50° and 61° north and south latitude and that they are concentrated in and near Milankovič crater in the northern hemisphere and southeast of the Hellas basin in the southern hemisphere. These may represent locations of particularly thick or clean bodies of ice. Pits created by retreat of the scarps represent sublimation-thermokarst landforms that evolve in a manner distinct from other ice-loss landforms on Mars. New impact craters reveal that clean subsurface ice is widespread at middle- and high-latitudes in both hemispheres at depths less than 1 m. Both the depth to ice and the ice content appear to exhibit significant variability over tens to hundreds of meters. The lowest-latitude exposed ice is near 39°N and is at the edge of a region where impact exposures between 40° and 50°N are common, consistent with other indications of a high ice content. This lowest-latitude ice may be currently unstable and subliming. Impact craters on lineated valley fill excavate ice blocks that may represent the top of debris-covered glacial ice. Together, these landforms indicate widespread, clean subsurface ice at middle-latitudes on Mars. The distribution and properties of this ice could provide information about past climate conditions.

Journal of Geophysical Research: Planets↗

Measuring impact crater depth throughout the solar system

One important, almost ubiquitous, tool for understanding the surfaces of solid bodies throughout the solar system is the study of impact craters. While measuring a distribution of crater diameters and locations is an important tool for a wide variety of studies, so too is measuring a crater's “depth.” Depth can inform numerous studies including the strength of a surface and modification rates in the local environment. There is, however, no standard data set, definition, or technique to perform this data‐gathering task, and the abundance of different definitions of “depth” and methods for estimating that quantity can lead to misunderstandings in and of the literature. In this review, we describe a wide variety of data sets and methods to analyze those data sets that have been, are currently, or could be used to derive different types of crater depth measurements. We also recommend certain nomenclature in doing so to help standardize practice in the field. We present a review section of all crater depths that have been published on different solar system bodies which shows how the field has evolved through time and how some common assumptions might not be wholly accurate. We conclude with several recommendations for researchers which could help different data sets to be more easily understood and compared.

Meteoritics and Planetary Science↗

A revised surface age for the North Polar Layered Deposits of Mars

The North Polar Layered Deposits (NPLD) of Mars contain a complex stratigraphy that has been suggested to retain a record of past eccentricity- and obliquity-forced climate changes. The surface accumulation rate in the current climate can be constrained by the crater retention age. We scale NPLD crater diameters to account for icy target strength and compare surface age using a new production function for recent small impacts on Mars to the previously used model of Hartmann (2005). Our results indicate that ice is accumulating in these craters several times faster than previously thought, with a 100 m diameter crater being completely infilled within centuries. Craters appear to have a diameter-dependent lifetime, but the data also permit a complete resurfacing of the NPLD at ~1.5 ka.

Geophysical Research Letters↗