Geology topics

Marc-Henri Derron

Publications and source records attributed to Marc-Henri Derron.

3 recordsLinked to original sources

USGS2020

Remote thermal detection of exfoliation sheet deformation

A growing body of research indicates that rock slope failures, particularly from exfoliating cliffs, are promoted by rock deformations induced by daily temperature cycles. Although previous research has described how these deformations occur, full three-dimensional monitoring of both the deformations and the associated temperature changes has not yet been performed. Here we use integrated terrestrial laser scanning (TLS) and infrared thermography (IRT) techniques to monitor daily deformations of two granitic exfoliating cliffs in Yosemite National Park (CA, USA). At one cliff, we employed TLS and IRT in conjunction with in situ instrumentation to confirm previously documented behavior of an exfoliated rock sheet, which experiences daily closing and opening of the exfoliation fracture during rock cooling and heating, respectively, with a few hours delay from the minimum and maximum temperatures. The most deformed portion of the sheet coincides with the area where both the fracture aperture and the temperature variations are greatest. With the general deformation and temperature relations established, we then employed IRT at a second cliff, where we remotely detected and identified 11 exfoliation sheets that displayed those general thermal relations. TLS measurements then subsequently confirmed the deformation patterns of these sheets showing that sheets with larger apertures are more likely to display larger thermal-related deformations. Our high-frequency monitoring shows how coupled TLS and IRT allows for remote detection of thermally induced deformations and, importantly, how IRT could potentially be used on its own to identify partially detached exfoliation sheets capable of large-scale deformation. These results offer a new and efficient approach for investigating potential rockfall sources on exfoliating cliffs.

California↗

USGS2020

Quantifying 40 years of rockfall activity in Yosemite Valley with historical Structure-from-Motion photogrammetry and terrestrial laser scanning

Rockfalls and rockslides are often dominant geomorphic processes in steep bedrock landscapes, but documenting their occurrence can be challenging, requiring frequent monitoring and well resolved spatial data. Repeat application of remote sensing methods such as Terrestrial Laser Scanning (TLS) and Structure-from-Motion (SfM) photogrammetry can detect even very small rockfalls, but typically these acquisitions span only years and may not record rockfall activity representative of longer-term rates of cliff erosion. Inventory databases can extend rockfall records, but are commonly incomplete and prone to observation bias. We employed TLS and SfM on two adjacent cliffs (El Capitan and Middle Brother) in Yosemite Valley, integrating semi-annual data collections from 2010 to 2017 with “historical” (archival) SfM models derived from oblique photographs taken in 1976. Comparing the 1976 SfM models against more recent data allows for more accurate and precise rockfall detection and volume measurement over a 40-year period. Change detection indicates that 235 rockfalls occurred from the two cliffs, more than twice as many events as are recorded in Yosemite's inventory database. Although individual rockfall volumes reported in the inventory database vary from those measured by SfM-TLS, reported cumulative volumes are similar to measured volumes, likely because the large-volume events that account for most of the cumulative volume tend to be widely observed and well-documented. Volume-frequency relationships indicate that the cliffs erode predominantly by less frequent, larger-volume rockfalls, at rates of 0.9 to 1.7 mm/yr. Our study demonstrates how integrated SfM and TLS measurements, especially utilizing SfM models derived from historical imagery, allow detection and quantification of rockfalls spanning several decades, complementing and improving inventory databases, informing rockfall hazard assessment, and providing longer-term rates of cliff erosion.

California↗

USGS2019

Detection of rock bridges by infrared thermal imaging and modeling

Characterization of rock discontinuities and rock bridges is required to define stability conditions of fractured rock masses in both natural and engineered environments. Although remote sensing methods for mapping discontinuities have improved in recent years, remote detection of intact rock bridges on cliff faces remains challenging, with their existence typically confirmed only after failure. In steep exfoliating cliffs, such as El Capitan in Yosemite Valley (California, USA), rockfalls mainly occur along cliff-parallel exfoliation joints, with rock bridges playing a key role in the stability of partially detached exfoliation sheets. We employed infrared thermal imaging (i.e., thermography) as a new means of detecting intact rock bridges prior to failure. An infrared thermal panorama of El Capitan revealed cold thermal signatures for the surfaces of two granitic exfoliation sheets, consistent with the expectation that air circulation cools the back of the partially detached sheets. However, we also noted small areas of warm thermal anomalies on these same sheets, even during periods of nocturnal rock cooling. Rock attachment via rock bridges is the likely cause for the warm anomalies in the thermal data. 2-D model simulations of the thermal behavior of one of the monitored sheets reproduce the observed anomalies and explain the temperature differences detected in the rock bridge area. Based on combined thermal and ground-based lidar imaging, and using geometric and rock fracture mechanics analysis, we are able to quantify the stability of both sheets. Our analysis demonstrates that thermography can remotely detect intact rock bridges and thereby greatly improve rockfall hazard assessment.

California↗