Search USGS⌕ Search

Geology topics

M. E. Gettings

Publications and source records attributed to M. E. Gettings.

At least 19 recordsLinked to original sources
USGS2012

Variation of depth to the brittle-ductile transition due to cooling of a midcrustal intrusion

The depth to the brittle-ductile transition in the crust is often defined by the intersection of a shear resistance relation in the brittle upper crust that increases linearly with depth and a power law relation for ductile flow in the lower crust that depends strongly on temperature. Transient variation of this depth caused by a magmatic intrusion at a depth near the regional transition can be modeled by a heat conduction model for a rectangular parallelepiped superimposed on a linear geothermal gradient. When parameters appropriate for the southeastern United States are used, a moderate-sized intrusion is found to decrease the transition depth by as much as 7 km; significant variations last about 10 m.y. Since the base of the seismogenic zone is identified with the brittle-ductile transition and since significant depth variations provide loci for strain energy concentration, these results imply that intrusions of late Tertiary age or younger could be important sources of clustered seismicity.

Geophysical Research Letters↗
USGS2006

Texture analysis for automated classification of geologic structures

Texture present in aeromagnetic anomaly images offers an abundance of useful geological information for discriminating between rock types, but current analysis of such images still relies on tedious, human interpretation. This study is believed to be the first effort to quantitatively assess the performance of texture-based digital image analysis for this geophysical exploration application. We computed several texture measures and determined the best subset using automated feature selection techniques. Pattern classification experiments measured the ability of various texture measures to automatically predict rock types. The classification accuracy was significantly better than a priori probability and prior weights-of-evidence results. The accuracy rates and choice of texture measures that minimize the error rate are reported. ?? 2006 IEEE.

Conference Paper↗
USGS2004

A Complex Systems Model Approach to Quantified Mineral Resource Appraisal

For federal and state land management agencies, mineral resource appraisal has evolved from value-based to outcome-based procedures wherein the consequences of resource development are compared with those of other management options. Complex systems modeling is proposed as a general framework in which to build models that can evaluate outcomes. Three frequently used methods of mineral resource appraisal (subjective probabilistic estimates, weights of evidence modeling, and fuzzy logic modeling) are discussed to obtain insight into methods of incorporating complexity into mineral resource appraisal models. Fuzzy logic and weights of evidence are most easily utilized in complex systems models. A fundamental product of new appraisals is the production of reusable, accessible databases and methodologies so that appraisals can easily be repeated with new or refined data. The data are representations of complex systems and must be so regarded if all of their information content is to be utilized. The proposed generalized model framework is applicable to mineral assessment and other geoscience problems. We begin with a (fuzzy) cognitive map using (+1,0,-1) values for the links and evaluate the map for various scenarios to obtain a ranking of the importance of various links. Fieldwork and modeling studies identify important links and help identify unanticipated links. Next, the links are given membership functions in accordance with the data. Finally, processes are associated with the links; ideally, the controlling physical and chemical events and equations are found for each link. After calibration and testing, this complex systems model is used for predictions under various scenarios.

Environmental Management↗
USGS2000

Depth to bedrock in the upper San Pedro Valley, Cochise County, southeastern Arizona

The thickness, distribution, and character of alluvial sediments that were deposited in the structural subbasins of the upper San Pedro basin in southeastern Arizona during the late Cenozoic provide important constraints on ground-water availability of the area. Two sedimentary units are recognized; the Oligocene and Miocene Pantano(?) Formation and an unnamed upper Miocene through lower Pleistocene unit termed basin fill. The complete Bouguer gravity anomaly map shows that there are three major structural subbasins in the upper San Pedro basin north of the international border with Mexico. The Tombstone subbasin is north of Tombstone, and two more are located north and south of Sierra Vista, respectively. This report concentrates on the two subbasins north and south of Sierra Vista. The northern subbasin (termed the Huachuca City subbasin) extends from east of Huachuca City to northeast of Whetstone, and the southern subbasin (termed the Palominas subbasin) extends southward from a line between Nicksville and Hereford to the border. The locations and shapes of these subbasins, thickness of basin fill, and depth to bedrock were estimated using a procedure involving interpolation of (1) the density functions derived in this study, (2) stratigraphic data from water wells, and (3) a residual gravity anomaly grid obtained by subtracting the gravity effects of the bedrock ranges bordering the basin from the complete Bouguer gravity anomaly. This procedure indicates that the subbasins are shallow and contain significant thicknesses of the Pantano(?) Formation in addition to the overlying younger basin fill. The maximum depth to bedrock is about 1,700 m in the Palominas subbasin and 800m in the Huachuca City subbasin; the basin-fill unit occupies the upper 250-350 m in general with local thickenings exceeding 1,000 m in the Palominas subbasin. An east-west trending buried bedrock high beneath Fort Huachuca, Sierra Vista, and Charleston separates the subbasins. The depth to bedrock over this high is 200-500 m and the basin-fill unit ranges from 100 to 200 m thick there. A number of previously unrecognized faults were identified and the lengths of some of the known faults were extended based on reconnaissance geologic mapping, study of driller's logs, interpretation of aerial photographs and thematic mapper satellite images, and inspection of contoured gravity and aeromagnetic anomaly data. Many faults that segment the main San Pedro basin and shape the boundaries of the subbasins are apparently pre-existing faults that have been reactivated by Basin and Range extension.

Open-File Report↗
USGS1999

Field trip guide to selected studies of the Southwest Mineral and Environmental Investigations Project in southeastern Arizona

The Southwest Mineral and Environmental Investigations Project is designed to address issues raised by rapid urban development in the basins of the southwestern U.S. These issues require objective geoscientific data that can be used by land managers and stakeholders to develop informed land and water use strategies. The project integrates new and existing geologic, geophysical, and geochemical data, and imagery to provide three-dimensional visualizations of the basins of southeastern Arizona. Emphasis is on developing better knowledge of the aquifer systems of both the basins and the ranges, on acquiring background and baseline information, and on determining the distribution of metals related to mineralization and the fate of these metals in surface and subsurface environments. The products of the project will be used in resolving issues of water quality and quantity, in understanding environmental impacts such as riparian ecosystem maintenace, and in evaluating mineral resources beneath and within the basins. The field trip highlights three topics and areas (figs. 1 and 2): (1) geology and geophysics of the upper San Pedro and upper Santa Cruz basins (M.E. Gettings, M. W. Bultman, and B.B. Houser), (2) geology, geophysics, and mineral resource potential of the San Rafael basin (M.W. Bultman), and (3) hydrology and aqueous geochemistry of the Red Mountain and Sonoita Creek drainage system (Floyd Gray). The trip guide, which begins and ends in Tucson, Arizona, also includes commentary on the cultural and mining history of the area.

Arizona↗
USGS1999

An interpretation of the 1997 airborne electromagnetic (AEM) survey, Fort Huachuca vicinity, Cochise County, Arizona

Executive Summary -- In March of 1997, an airborne electromagnetic (AEM) survey of the Fort Huachuca Military Reservation and immediate surrounds (location map, http://geopubs.wr.usgs.gov/open-file/of99-007-b/index.jpg) was conducted. This survey was sponsored by the U.S. Army and contracted through the Geologic Division of the U.S. Geological Survey (USGS). Data were gathered by Geoterrex-Dighem Ltd. of Ottawa, Canada. The survey aircraft is surrounded by a coil through which a large current pulse is passed. This pulse induces currents in the Earth which are recorded by a set of three mutually perpendicular coils towed in a 'bird' about 100 m behind and below the aircraft. The bird also records the Earth's magnetic field. The system samples the Earth response to the electromagnetic pulse about every 16 m along the aircraft flight path. For this survey, the bulk of the flightpaths were spaced about 400 m apart and oriented in a northeast-southwest direction extending from bedrock over the Huachuca Mountains to bedrock over the Tombstone Hills. A preliminary report on the unprocessed data collected in the field was delivered to the U.S. Army by USGS in July 1997 (USGS Open-File Report 97?457). The final data were delivered in March, 1998 by the contractor to USGS and thence to the U.S. Army. The present report represents the final interpretive report from USGS. The objectives of the survey were to: 1) define the structure of the San Pedro basin in the Sierra Vista-Fort Huachuca-Huachuca City area, including the depth and shape of the basin, and to delineate large faults that may be active within the basin fill and therefore important in the hydrologic regime; 2) define near surface and subsurface areas that contain a large volume fraction of silt and clay in the basin fill and which both reduce the volume of available storage for water and reduce the permeability of the aquifer; and 3) to evaluate the use of the time domain electromagnetic method in the southwest desert setting as a means of mapping depth to water. Chapter one, written by M.E. Gettings, reports the results of the analysis of the aeromagnetic anomaly data. Depths to magnetic rocks computed from these data are in good agreement with depths from gravity anomaly models (Gettings and Houser, in prep.) and confirm and refine the location of the bedrock highs which reach to within 200 m of the surface in several parts of the study area. The highly faulted and generally shallow character of the basin within the study area deduced from the gravity studies is also evident in the aeromagnetic data. The caldera ring fault delimiting the buried structural southwest edge of the Tombstone caldera is expressed in the magnetic data and deeper intrusives extending outside the caldera to the southwest are inferred. Several magnetic bodies occur at shallow depths within the Precambrian granite of the Huachuca Mountains along the eastern foothills of the mountains. These are inferred to be Tertiary intrusives but remain to be confirmed by field work if any of their uppermost dikes or apotheses are exposed. Faults delineating the east-west trending bedrock high beneath the city of Sierra Vista appear to be shallow and should be investigated for surface expressions. Chapter two, written by Jeff Wynn, analyzes and interprets the conductivity depth transforms (CDTs) and provides a general evaluation of the data quality. He concludes that there is a good general correlation between the uppermost conductor seen in the CDTs and water table depth in many cases. Detailed comparisons between the ground-based vertical electric soundings (VES) and the CDTs are reported in this chapter. The two sets of data compare well in general for most sounding sites where the VES data are not noisy.

Arizona↗
USGS1987

Gravity profiles across the Uyaijah Ring structure, Kingdom of Saudi Arabia

Three detailed gravity profiles across parts of the Uyaijah ring structure have been completed using an average station spacing of 260 M (giving a total of 217 gravity stations) and level surveys for elevation control. When combined with regional gravity-anomaly data, the profiles are adequate for construction of a structural model of the ring complex based on gravity models. The resulting structural model, based on profile fits to gravity responses of three-dimensional models and excess-mass calculations, gives a depth estimate to the base of the complex of 4.75 km. The contacts of the complex are inferred to be steeply dipping inward along the southwest margin of the structure. To the north and east, however, the basal contact of the complex dips more gently inward (about 30 degrees). The ring structure appears to be composed of three laccolith-shaped plutons; two are granitic in composition and make up about 85 percent of the volume of the complex, and one is granodioritic and comprises the remaining 15 percent. The source area for the plutons appears to be in the southwest quadrant of the Uyaijah ring structure. A northwest-trending shear zone cuts the northern half of the structure and contains mafic dikes that have a small but identifiable gravity-anomaly response. The structural model agrees with models derived from geological interpretation except that the estimated depth to which the structure extends is decreased considerably by the gravity results.

Open-File Report↗
USGS1985

Saudi Arabian seismic-refraction profile: A traveltime interpretation of crustal and upper mantle structure

The crustal and upper mantle compressional-wave velocity structure across the southwestern Arabian Shield has been investigated by a 1000-km-long seismic refraction profile. The profile begins in Mesozoic cover rocks near Riyadh on the Arabian Platform, trends southwesterly across three major Precambrian tectonic provinces, traverses Cenozoic rocks of the coastal plain near Jizan, and terminates at the outer edge of the Farasan Bank in the southern Red Sea. More than 500 surveyed recording sites were occupied, and six shot points were used, including one in the Red Sea. Two-dimensional ray-tracing techniques, used to analyze amplitude-normalized record sections indicate that the Arabian Shield is composed, to first order, of two layers, each about 20 km thick, with average velocities of about 6.3 km/s and 7.0 km/s, respectively. West of the Shield-Red Sea margin, the crust thins to a total thickness of less than 20 km, beyond which the Red Sea shelf and coastal plain are interpreted to be underlain by oceanic crust. A major crustal inhomogeneity at the northeast end of the profile probably represents the suture zone between two crustal blocks of different composition. Elsewhere along the profile, several high-velocity anomalies in the upper crust correlate with mapped gneiss domes, the most prominent of which is the Khamis Mushayt gneiss. Based on their velocities, these domes may constitute areas where lower crustal rocks have been raised some 20 km. Two intracrustal reflectors in the center of the Shield at 13 km depth probably represent the tops of mafic intrusives. The Mohorovičić discontinuity beneath the Shield varies from a depth of 43 km and mantle velocity of 8.2 km/s in the northeast to a depth of 38 km and mantle velocity of 8.0 km/s depth in the southwest near the Shield-Red Sea transition. Two velocity discontinuities occur in the upper mantle, at 59 and 70 km depth. The crustal and upper mantle velocity structure of the Arabian Shield is interpreted as revealing a complex crust derived from the suturing of island arcs in the Precarnbrian. The Shield is currently flanked by the active spreading boundary in the Red Sea.

Tectonophysics↗
USGS1985

Paleomagnetic investigations at Mahd adh Dhahab, Kingdom of Saudi Arabia

Paleomagnetic studies of 25 oriented bedrock specimens from Jabal Mahd adh Dhahab, located 160 km southeast of Al Madinah, Kingdom of Saudi Arabia, have yielded important structural information relating to the geologic history of this base and precious metal deposit. Samples were collected along one traverse away from the mineralized zones, across the northeast-plunging antiform that constitutes the dominant regional structure of the area, and along another traverse down the axis of the mineralized zones. Lithologies range from andesite flows through andesitic to rhyodacitic tuffs, lapilli tuffs, and volcaniclastic sediments. Measurements of remanent magnetization direction and intensity before and after stepwise alternating-field demagnetization ranging from 25 Oersted (Oe) to 1000 Oe were carried out on all samples. Three classes of demagnetization behavior were observed: A very stable class with little change in direction and intensity of magnetization; a class in which rapid changes were observed at first but which then settled on a high coercivity stable component of magnetization; and a class in which the magnetization was composed of a spectrum of low coervicity components, and continuous variation of direction and intensity of magnetization occurred. A structural correction restoring the bedding to horizontal resulted in a significant reduction in dispersion of magnetization directions, and implies that the magnetization was acquired before the northeast-trending deformation. At least one geomagnetic reversal is recorded and, together with drillhole electric logs, suggests structural repetition of some parts of the area. The determined paleopole location, after correction for Tertiary rotation of Arabia from Africa, falls on the apparent polar wander path for Gondwanaland at an age of 600-590 Ma, which is younger than the mineralization age of about 680 Ma and the age of the Mahd group of rocks (772 Ma) determined from geochronologic studies, and implies that the rocks have been remagnetized during the middle Pan African times. The results of this work suggest that more extensive paleomagnetic investigations of the felsic volcanic and volcanic-derived rocks of the northern Arabian shield should provide greater insight into the structural evolution of the shield, and these investigations are recommended.

Open-File Report↗
USGS1985

Reconnaissance geologic map of the Jizan Quadrangle, sheet 16/42 B, Kingdom of Saudi Arabia

The Jizan quadrangle, bounded by lat 16°30’ and 17°00’ N. and long 42°30’ and 43°00’ E., is one of the southernmost quadrangles of the Kingdom of Saudi Arabia. It is named after Jizan, the largest city and principal port of the region, with about 30,000 inhabitants. Other significant towns and villages include Abu Arish, Al Madayah and Karbus, all linked to Jizan and adjoining quadrangles by paved roads. Most of the quadrangle is occupied by coastal plain bordering the Red Sea; one third is occupied by part of the Red Sea and the extreme northeast corner includes foothills of the Red Sea escarpment. The coastal plain, as much as 40 km wide, is covered by Quaternary surficial deposits overlying a sequence of Tertiary and Quaternary sedimentary rocks as much as 5 km thick. The only relief on the plain is provided by the Jizan salt dome, elevated about 50 m above sea level at Jizan city, and by small extinct volcanoes 100 to 150 m high near Abu Arish. The coastal plain is separated form islands, tidal mud flats and shallow lagoons. The sea is shallow, less than 200 m deep, and forms part of the shelf marginal to the main axial trough of the Red Sea. The high ground in the northeast of the quadrangle is formed by Jabal at Tirf, 452 m above sea level at its summit.

Open-File Report↗