Search USGSSearch

Geology topics

Lisa R. Gaddis

Publications and source records attributed to Lisa R. Gaddis.

At least 37 records · Page 2Linked to original sources

Compositional variations on the Moon: Recalibration of Galileo solid‐state imaging data for the Orientale region and farside

Updated radiometric calibration and systematic processing procedures for Galileo solid‐state imaging (SSI) data from the first (1990) Earth‐Moon encounter are presented. These procedures were applied to a whole‐disk imaging sequence of the Moon centered near Mare Orientale, called Lunmap 14 (L14). Processing of L14 data included radiometric calibration, subpixel coregistration, scattered light removal, geometric control and reprojection, photometric normalization, and calibration to Earth‐based spectra. Coregistration and scattered‐light removal procedures are improvements over the initial calibration of the SSI mosaics. The effects of scattered light correction are best seen using a whole‐Moon view such as L14; resolution of the debated amounts of light scattering from within or outside the camera field of view is not necessary. Scattered light removal particularly affects the 1‐μm spectral region and has implications for interpretation of mafic mineral signatures in mare deposits of the lunar limb and farside. Recalibrated spectra indicate that mare ponds of the limb show moderately deep 1‐μm absorptions, and thus mafic mineral contents, comparable to those of other nearside basalts. Mafic mineral contents of Schiller‐Shickard cryptomaria are higher than previously thought and are similar to some low‐Ti nearside basalts. Many of the recalibrated spectra from South Pole/Aitken are similar to those of Schiller‐Schickard cryptomaria, suggesting that many of these soils represent a mixed mare/highland lithology. The hypothesis that there is an olivine enrichment in southern South Pole/Aitken basin is not supported strongly by spectra shown here.

Journal of Geophysical Research: Planets

Characterization of previously unidentified lunar pyroclastic deposits using Lunar Reconnaissance Orbiter Camera (LROC) data

We used a Lunar Reconnaissance Orbiter Camera (LROC) global monochrome Wide-angle Camera (WAC) mosaic to conduct a survey of the Moon to search for previously unidentified pyroclastic deposits. Promising locations were examined in detail using LROC multispectral WAC mosaics, high-resolution LROC Narrow Angle Camera (NAC) images, and Clementine multispectral (ultraviolet-visible or UVVIS) data. Out of 47 potential deposits chosen for closer examination, 12 were selected as probable newly identified pyroclastic deposits. Potential pyroclastic deposits were generally found in settings similar to previously identified deposits, including areas within or near mare deposits adjacent to highlands, within floor-fractured craters, and along fissures in mare deposits. However, a significant new finding is the discovery of localized pyroclastic deposits within floor-fractured craters Anderson E and F on the lunar farside, isolated from other known similar deposits. Our search confirms that most major regional and localized low-albedo pyroclastic deposits have been identified on the Moon down to ~100 m/pix resolution, and that additional newly identified deposits are likely to be either isolated small deposits or additional portions of discontinuous, patchy deposits.

Journal of Geophysical Research E: Planets

Hyperspectral analysis of rocky surfaces on the Earth and other planetary systems: Chapter 27

This book is focused on studies of vegetation on Earth using hyperspectral remote sensing methods. However, it is appropriate to extend the application of these methods out to other rocky bodies in our Solar System for a variety of reasons. First, minerals, soils, and rocks form the substrate on which vegetation grows on Earth. Compositional analyses of these components with hyperspectral data provide essential background information for distinguishing, identifying, and removing their effects on vegetation spectra. Second, variation in distribution, chemical and physical properties among soil and rock, has been demonstrated to have a significant effect on factors such as moisture retention, dust production, and the presence and distribution of biological species ranging from bacteria, fungi, grasses, shrubs, trees, and small mammals to humans [1]. These factors in turn can have profound influences on human health.

Book chapter

New insight into lunar impact melt mobility from the LRO camera

The Lunar Reconnaissance Orbiter Camera (LROC) is systematically imaging impact melt deposits in and around lunar craters at meter and sub-meter scales. These images reveal that lunar impact melts, although morphologically similar to terrestrial lava flows of similar size, exhibit distinctive features (e.g., erosional channels). Although generated in a single rapid event, the post-impact mobility and morphology of lunar impact melts is surprisingly complex. We present evidence for multi-stage influx of impact melt into flow lobes and crater floor ponds. Our volume and cooling time estimates for the post-emplacement melt movements noted in LROC images suggest that new flows can emerge from melt ponds an extended time period after the impact event.

Geophysical Research Letters

Thorium abundances on the Aristarchus plateau: Insights into the composition of the Aristarchus pyroclastic glass deposits

Thorium (Th) data from the Lunar Prospector gamma ray spectrometer (LP‐GRS) are used to constrain the composition of lunar pyroclastic glass deposits on top of the Aristarchus plateau. Our goal is to use forward modeling of LP‐GRS Th data to measure the Th abundances on the plateau and then to determine if the elevated Th abundances on the plateau are associated with the pyroclastic deposits or with thorium‐rich ejecta from Aristarchus crater. We use a variety of remote sensing data to show that there is a large, homogenous portion of the pyroclastics on the plateau that has seen little or no contamination from the Th‐rich ejecta of Aristarchus crater. Our results show that the uncontaminated pyroclastic glasses on Aristarchus plateau have an average Th content of 6.7 ppm and ∼7 wt % TiO 2 . These Th and Ti values are consistent with Th‐rich, intermediate‐Ti yellow glasses from the lunar sample suite. On the basis of this information, we use petrologic equations and interelement correlations for the Moon to estimate the composition of the source region from which the Aristarchus glasses were derived. We find that the source region for the Aristarchus glasses contained high abundances of heat‐producing elements, which most likely served as a thermal driver for the prolonged volcanic activity in this region of the Moon.

Journal of Geophysical Research E: Planets

Surface processes recorded by rocks and soils on Meridiani Planum, Mars: Microscopic Imager observations during Opportunity's first three extended missions

The Microscopic Imager (MI) on the Mars Exploration Rover Opportunity has returned images of Mars with higher resolution than any previous camera system, allowing detailed petrographic and sedimentological studies of the rocks and soils at the Meridiani Planum landing site. Designed to simulate a geologist's hand lens, the MI is mounted on Opportunity's instrument arm and can resolve objects 0.1 mm across or larger. This paper provides an overview of MI operations, data calibration, and analysis of MI data returned during the first 900 sols (Mars days) of the Opportunity landed mission. Analyses of Opportunity MI data have helped to resolve major questions about the origin of observed textures and features. These studies support eolian sediment transport, rather than impact surge processes, as the dominant depositional mechanism for Burns formation strata. MI stereo observations of a rock outcrop near the rim of Erebus Crater support the previous interpretation of similar sedimentary structures in Eagle Crater as being formed by surficial flow of liquid water. Well‐sorted spherules dominate ripple surfaces on the Meridiani plains, and the size of spherules between ripples decreases by about 1 mm from north to south along Opportunity's traverse between Endurance and Erebus craters.

Journal of Geophysical Research E: Planets

Cartography for lunar exploration: 2008 status and mission plans

The initial spacecraft exploration of the Moon in the 1960s-70s yielded extensive data, primarily in the form of film and television images, which were used to produce a large number of hardcopy maps by conventional techniques. A second era of exploration, beginning in the early 1990s, has produced digital data including global multispectral imagery and altimetry, from which a new generation of digital map products tied to a rapidly evolving global control network has been made. Efforts are also underway to scan the earlier hardcopy maps for online distribution and to digitize the film images so that modern processing techniques can be used to make high-resolution digital terrain models (DTMs) and image mosaics consistent with the current global control. The pace of lunar exploration is accelerating dramatically, with as many as eight new missions already launched or planned for the current decade. These missions, of which the most important for cartography are SMART-1 (Europe), Kaguya/SELENE (Japan), Chang'e-1 (China), Chandrayaan-1 (India), and Lunar Reconnaissance Orbiter (USA), will return a volume of data exceeding that of all previous lunar and planetary missions combined. Framing and scanner camera images, including multispectral and stereo data, hyperspectral images, synthetic aperture radar (SAR) images, and laser altimetry will all be collected, including, in most cases, multiple data sets of each type. Substantial advances in international standardization and cooperation, development of new and more efficient data processing methods, and availability of resources for processing and archiving will all be needed if the next generation of missions are to fulfill their potential for high-precision mapping of the Moon in support of subsequent exploration and scientific investigation.

The International Archives of the Photogrammetry,

Cartography for lunar exploration: Current status and planned missions

The initial spacecraft exploration of the Moon in the 1960s–70s yielded extensive data, primarily in the form of film and television images, that were used to produce a large number of hardcopy maps by conventional techniques. A second era of exploration, beginning in the early 1990s, has produced digital data including global multispectral imagery and altimetry, from which a new generation of digital map products tied to a rapidly evolving global control network has been made. Efforts are also underway to scan the earlier hardcopy maps for online distribution and to digitize the film images themselves so that modern processing techniques can be used to make high-resolution digital terrain models (DTMs) and image mosaics consistent with the current global control. The pace of lunar exploration is about to accelerate dramatically, with as many of seven new missions planned for the current decade. These missions, of which the most important for cartography are SMART-1 (Europe), SELENE (Japan), Chang'E-1 (China), Chandrayaan-1 (India), and Lunar Reconnaissance Orbiter (USA), will return a volume of data exceeding that of all previous lunar and planetary missions combined. Framing and scanner camera images, including multispectral and stereo data, hyperspectral images, synthetic aperture radar (SAR) images, and laser altimetry will all be collected, including, in most cases, multiple datasets of each type. Substantial advances in international standardization and cooperation, development of new and more efficient data processing methods, and availability of resources for processing and archiving will all be needed if the next generation of missions are to fulfil their potential for high-precision mapping of the Moon in support of subsequent exploration and scientific investigation.

Conference Paper

Urgent processing and control of lunar data

There is an urgent, time-critical need to begin tying together (geodetically controlling) all past and current lunar data, and to establish the cartographic foundation needed to make maximum use of future planned lunar data. Proper control of lunar datails required to properly support both lunar science and exploration, and at present we know of no plans within NASA to fund such work adequately. The utility of past and future lunar data will be severely hampered if they cannot be correlated/compared with each other or if the uncertainties in the positional accuracies are not well characterized. Since “required capabilities” and “technology developments” are on the primary list of issues for this workshop [1], it is clear that this issue is not only appropriate but critical to discuss and that strong recommendations must be made to address this problem. This white paper summarizes more detailed discussions that we have presented earlier [2].

Conference Paper

Remote sensing studies of the Dionysius region of the Moon

The Dionysius region is located near the western edge of Mare Tranquillitatis and is centered on Dionysius crater, which exhibits a well-developed dark ray system. Proposed origins for these dark rays included impact melt deposits and dark primary ejecta. The region also contains extensive deposits of Cayley-type light plains. Clementine multispectral images and a variety of spacecraft photography were utilized to investigate the composition and origin of geologic units in the Dionysius region. The portions of the dark rays for which spectral and chemical data were obtained are composed of mare debris contaminated with minor amounts of highland material. Both five-point spectra and values of the optical maturity (OMAT) parameter indicate that the dark rays are dominated by mare basalts, not glassy impact melts. The high-albedo rays associated with Dionysius exhibit FeO and TiO2 values that are lower than those of the adjacent dark ray surfaces and OMAT values that indicate that bright ray surfaces are not fully mature. The high-albedo rays are bright largely because of the contrast in albedo between ray material containing highlands-rich ejecta and the adjacent mare-rich surfaces. The mafic debris ejected by Dionysius was derived from a dark, iron-rich unit exposed high on the inner wall of the crater. This layer probably represents a mare deposit that was present at the surface of the preimpact target site. With one possible exception, there is no evidence for buried mare basalts associated with Cayley plains in the region.

Journal of Geophysical Research E: Planets

Overview of the Microscopic Imager Investigation during Spirit's first 450 sols in Gusev crater

The Microscopic Imager (MI) on the Mars Exploration Rover Spirit has returned images of Mars with higher resolution than any previous camera system, allowing detailed petrographic and sedimentological studies of the rocks and soils at the Gusev landing site. Designed to simulate a geologist's hand lens, the MI is mounted on Spirit's instrument arm and can resolve objects 0.1 mm in size or larger. This paper provides an overview of MI operations, data calibration, processing, and analysis of MI data returned during the first 450 sols (Mars days) of the Spirit landed mission. The primary goal of this paper is to facilitate further analyses of MI data by summarizing the methods used to acquire and process the data, the radiometric and geometric accuracy of MI data products, and the availability of archival products. In addition, scientific results of the MI investigation are summarized. MI observations show that poorly sorted soils are common in Gusev crater, although aeolian bedforms have well‐sorted coarse sand grains on their surfaces. Abraded surfaces of plains rocks show igneous textures, light‐toned veins or fracture‐filling minerals, and discrete coatings. The rocks in the Columbia Hills have a wide variety of granular textures, consistent with volcaniclastic or impact origins. Case hardening and submillimeter veins observed in the rocks as well as soil crusts and cemented clods imply episodic subsurface aqueous fluid movement, which has altered multiple geologic units in the Columbia Hills. The MI also monitored Spirit's solar panels and the magnets on the rover's deck.

Journal of Geophysical Research E: Planets

Cartography for lunar exploration: 2006 status and planned missions

The initial spacecraft exploration of the Moon in the 1960s–70s yielded extensive data, primarily in the form of film and television images, that were used to produce a large number of hardcopy maps by conventional techniques. A second era of exploration, beginning in the early 1990s, has produced digital data including global multispectral imagery and altimetry, from which a new generation of digital map products tied to a rapidly evolving global control network has been made. Efforts are also underway to scan the earlier hardcopy maps for online distribution and to digitize the film images themselves so that modern processing techniques can be used to make high-resolution digital terrain models (DTMs) and image mosaics consistent with the current global control. The pace of lunar exploration is about to accelerate dramatically, with as many of seven new missions planned for the current decade. These missions, of which the most important for cartography are SMART-1 (Europe), SELENE (Japan), Chang'E-1 (China), Chandrayaan-1 (India), and Lunar Reconnaissance Orbiter (USA), will return a volume of data exceeding that of all previous lunar and planetary missions combined. Framing and scanner camera images, including multispectral and stereo data, hyperspectral images, synthetic aperture radar (SAR) images, and laser altimetry will all be collected, including, in most cases, multiple datasets of each type. Substantial advances in international standardization and cooperation, development of new and more efficient data processing methods, and availability of resources for processing and archiving will all be needed if the next generation of missions are to fulfil their potential for high-precision mapping of the Moon in support of subsequent exploration and scientific investigation.

Conference Paper

Evidence from Opportunity’s Microscopic Imager for water on Meridiani Planum

The Microscopic Imager on the Opportunity rover analyzed textures of soils and rocks at Meridiani Planum at a scale of 31 micrometers per pixel. The uppermost millimeter of some soils is weakly cemented, whereas other soils show little evidence of cohesion. Rock outcrops are laminated on a millimeter scale; image mosaics of cross-stratification suggest that some sediments were deposited by flowing water. Vugs in some outcrop faces are probably molds formed by dissolution of relatively soluble minerals during diagenesis. Microscopic images support the hypothesis that hematite-rich spherules observed in outcrops and soils also formed diagenetically as concretions.

Science

Textures of the soils and rocks at Gusev Crater from Spirit’s Microscopic Imager

The Microscopic Imager on the Spirit rover analyzed the textures of the soil and rocks at Gusev crater on Mars at a resolution of 100 micrometers. Weakly bound agglomerates of dust are present in the soil near the Columbia Memorial Station. Some of the brushed or abraded rock surfaces show igneous textures and evidence for alteration rinds, coatings, and veins consistent with secondary mineralization. The rock textures are consistent with a volcanic origin and subsequent alteration and/or weathering by impact events, wind, and possibly water.

Science

Compositional analyses of lunar pyroclastic deposits

The 5-band Clementine UVVIS data at ∼100 m/pixel were used to examine the compositions of 75 large and small lunar pyroclastic deposits (LPDs), and these were compared to representative lunar maria and highlands deposits. Results show that the albedo, spectral color, and inferred composition of most LPDs are similar to those of low-titanium, mature lunar maria. These LPDs may have consisted largely of fragmented basalt, with substantial components of iron-bearing mafic minerals (pyroxenes, olivine) and smaller amounts (if any) of volcanic glass. Several smaller LPDs also show substantial highland components. Three classes of very large deposits can be distinguished from most LPDs and from each other on the basis of crystallinity and possible titanium content of their pyroclastic components. One class has spectral properties that are dominated by high-titanium, crystallized “black beads” (e.g., Taurus–Littrow), a second consists of a mixture of high-titanium glasses and beads with a higher glass/bead ratio (Sulpicius Gallus) than that of Taurus–Littrow, and a third has a significant component of quenched iron-bearing volcanic glasses (Aristarchus) with possible moderate titanium contents. Although areally extensive, these three classes of very large pyroclastic deposits compose only 20 of the 75 deposits studied (∼27%), and eruption of such materials was thus likely to have been less frequent on the Moon.

Icarus

Rock types of South Pole-Aitken basin and extent of basaltic volcanism

The enormous pre-Nectarian South Pole-Aitken (SPA) basin represents a geophysically and compositionally unique region on the Moon. We present and analyze the mineralogical diversity across this basin and discuss the implications for basin evolution. Rock types are derived from Clementine multispectral data based on diagnostic characteristics of ferrous absorptions in fresh materials. Individual areas are characterized as noritic (dominated by low-Ca pyroxene), gabbroic/basaltic (dominated by high-Ca pyroxene), feldspathic (<3-6% FeO), and olivine-gabbro (dominated by high-Ca pyroxene and olivine). The anorthositic crust has effectively been removed from the interior of the basin. The style of volcanism within the basin extends over several 100 Myr and includes mare basalt and pyroclastic deposits. Several areas of ancient (pre-Orientale) volcanism, or cryptomaria, have also been identified. The nonmare mafic lithology that occurs across the basin is shown to be noritic in composition and is pervasive laterally and vertically. We interpret this to represent impact melt/breccia deposits derived from the lower crust. A few localized areas are identified within the basin that contain more diverse lithologies (gabbro, olivine-gabbro), some of which may represent material from the deepest part of the lower crust and perhaps uppermost mantle involved in the SPA event.

Journal of Geophysical Research E: Planets