Geology topics

Leslie A. DeSimone

Publications and source records attributed to Leslie A. DeSimone.

At least 19 recordsLinked to original sources

USGS2025

Nitrate loads and concentrations from forested watersheds and implications for Long Island Sound

Reduction in point sources of nitrogen has led to improvement in water quality of the Long Island Sound (LIS) since 2000, but changes in nonpoint sources are less clear. A significant yet poorly quantified nonpoint nitrogen source is the forested landscape. Because a large proportion of the LIS basin is forested, even small areal inputs from the forested landscape have a large cumulative effect on nitrogen loading to LIS. Atmospheric nitrogen deposition, the primary source of nitrogen to forested landscapes in LIS basin, has been declining for several decades. However, nitrogen export in streams does not necessarily mirror nitrogen deposition. To assess forest nitrogen export to LIS, we estimated annual average concentrations and fluxes of nitrate in 17 forested watersheds in and near the LIS basin. Average flow-normalized nitrate-nitrogen concentrations ranged from less than 0.05–0.43 mg per liter among all sites; annual flow-normalized yields ranged from 0.45 to 4.3 kg per hectare. Flow-normalized annual average concentrations and yields of nitrate between water years 1991–2021 did not monotonically increase or decrease at most watersheds. Where determined, the other major N species generally had comparable magnitude and trends. Based on the watersheds analyzed in this study, forested areas are not responding uniformly to the continued decline of atmospheric nitrogen deposition. The variability among sites may indicate that local-scale factors exert substantial influence over the magnitude and trends in nitrogen exports. One watershed that had increasing development showed an increasing trend in nitrate, but not in dissolved organic nitrogen.

Connecticut, Massachusetts, New Hampshire, New Yor↗

USGS2023

Preliminary machine learning models of manganese and 1,4-dioxane in groundwater on Long Island, New York

Manganese and 1,4-dioxane in groundwater underlying Long Island, New York, were modeled with machine learning methods to demonstrate the use of these methods for mapping contaminants in groundwater in the Long Island aquifer system. XGBoost, a gradient boosted, ensemble tree method, was applied to data from 910 wells for manganese and 553 wells for 1,4-dioxane. Explanatory variables included soil properties, groundwater flow, land use, and other features that describe the hydrogeology and geochemistry of the aquifer system. Four models were developed to predict the probability of manganese concentrations greater than a detection level of 10 micrograms per liter (μg/L) and greater than three threshold concentrations (50, 150, and 300 μg/L) relevant to drinking-water quality. One model was developed to predict the probability of 1,4-dioxane concentrations greater than a detection level of 0.07 μg/L. The 1,4-dioxane model was limited geographically to Suffolk County because of data availability. Predictions were made for two layers in the upper glacial aquifer and three layers in the Magothy aquifer, which are the upper two of the three major aquifers of the Long Island aquifer system. The objective of the study described in this report was to demonstrate the application of the methods rather than to develop precise estimates of manganese or 1,4-dioxane concentrations at any given location. The predictive models developed in the study are considered preliminary in the sense that they are an initial effort at developing these kinds of models specifically for Long Island. The models could be improved by the inclusion of additional data, by the use of methods to improve the modeling of infrequent high concentrations of manganese and 1,4-dioxane (above threshold concentrations), and by including more explanatory variables that specifically describe conditions and contaminant sources on Long Island. Nonetheless, the distribution of model predictions and the influence of explanatory variables in the models were consistent with the expected relations between contaminant concentrations and groundwater-flow-system characteristics and the distribution of manmade sources. Mapped predictions indicated that manganese detections were more probable in the upper glacial aquifer and along the southern shore of Long Island, consistent with the distribution of anoxic conditions in groundwater in the Long Island aquifer system. Manganese was infrequently predicted at concentrations greater than thresholds of concern for drinking-water quality in any of the aquifer layers. Detections of 1,4-dioxane were predicted in the western, more highly developed parts of Suffolk County, in the upper glacial aquifer and the top and middle layers of the Magothy aquifer, and in northwestern Suffolk County in the bottom layer of the Magothy aquifer. Although preliminary in nature and based on limited data, these mapped predictions can be used to generally identify areas where manganese and 1,4-dioxane may be present at concentrations of concern to prioritize areas for future monitoring and to guide future modeling and mapping efforts.

New York↗

USGS2022

Surface-water-quality data to support implementation of revised freshwater aluminum water-quality criteria in Massachusetts, 2018–19

The U.S. Geological Survey, in cooperation with the Massachusetts Department of Environmental Protection, performed a study to inform the development of the department’s guidelines for the collection and use of water-chemistry data to support calculation of site-dependent aluminum criteria values. The U.S. Geological Survey collected and analyzed discrete water-quality samples at four wastewater-treatment facilities and seven water-treatment facilities in eastern and central Massachusetts from April 2018 through May 2019. For each of the 11 facilities considered, water-quality samples were collected from treatment-plant effluent and receiving-water bodies. Samples were collected for laboratory analysis of major ions (calcium and magnesium ions are used to calculate total hardness), dissolved organic carbon (DOC), total organic carbon (TOC), and total recoverable aluminum. Field parameters for pH, temperature, and specific conductance were measured in situ concurrently with sample collection. Water-quality conditions differed among monitoring stations. The highest pH values were observed for stations on the Assabet River that receive effluent discharges from wastewater-treatment facilities (the Westborough, Marlborough, Hudson, and Maynard wastewater-treatment facilities). High DOC concentrations (greater than 10 mg/L) were measured in water bodies associated with large areas of riparian wetlands—Lily Pond (Cohasset) and Third Herring Brook (Hanover), and low DOC concentrations (less than 2.5 mg/L) were measured at three water bodies in central Massachusetts—Hocomonco Pond (Westborough), Wyman Pond (Fitchburg), and Monoosnoc Brook (Leominster). Wyman Pond (Fitchburg), Monoosnoc Brook (Leominster), and Lily Pond (Cohasset) also had low pH values and low total hardness concentrations. The monthly discrete pH, DOC, and total hardness data for selected stations on receiving-water bodies were used in the U.S. Environmental Protection Agency Aluminum Criteria Calculator Version 2.0 to estimate site-dependent total recoverable aluminum concentrations that—if not exceeded—would be expected to protect fish, invertebrates, and other aquatic life from adverse effects associated with acute and chronic aluminum exposures. The U.S. Environmental Protection Agency Calculator output provides values for the acute criterion, defined as the criterion maximum concentration (CMC), an estimate of the highest aluminum concentration in surface water to which an aquatic community can be exposed briefly without resulting in an unacceptable effect. This output also provides values for the chronic criterion, defined as the criterion continuous concentration (CCC), an estimate of the highest concentration of aluminum in surface water to which an aquatic community can be exposed indefinitely without resulting in an unacceptable effect. To determine aluminum criteria values typically evaluated for use as protective water-quality criteria, the monthly instantaneous CMC and CCC values were used to calculate the minimum, 5th percentile, and 10th percentile CMC and CCC values for selected monitoring stations. The monthly instantaneous aluminum CMC and CCC values generated using the EPA Calculator varied among stations. Aluminum CMC and CCC values were highest for four ambient (upstream) stations on the Assabet River associated with wastewater-treatment facilities (Westborough, Marlboro, Hudson, and Maynard). Aluminum CMC and CCC values were lower for stations associated with water-treatment facilities, and lowest for selected ambient stations on Lily Pond, Monoosnoc Brook, and Wyman Pond associated with water-treatment facilities in Cohasset, Leominster, and Fitchburg, respectively. For many stations, the highest CMC and CCC instantaneous aluminum criteria values generated using the U.S. Environmental Protection Agency Calculator were for months during the growing season for algae and aquatic macrophytes (April or May through September or October) and the lowest values were for months during the nongrowing season (October or November through March or April), indicating the importance of collecting water-quality data during the nongrowing season. Aluminum CMC and CCC values generated by the U.S. Environmental Protection Agency Calculator are sensitive to variations in the input parameters (pH, DOC, and total hardness). Aluminum solubility is particularly affected by pH. To characterize diel and seasonal variations in pH, multiparameter water-quality monitors recording continuous (15-minute interval) water temperature and pH were installed in the receiving-water body for one station near each facility upstream from the effluent discharge (in rivers) or at a station outside the immediate effect of effluent discharge (in ponds). Continuous water temperature and pH data were collected from April or May 2018 through November or December 2018. Continuous pH data indicated that the pond stations and Assabet River stations had large diel variations in pH during the growing season. Continuous pH data were used together with discrete DOC and total hardness data to evaluate the potential effect of diel variations in pH on calculated site-dependent aluminum criteria values. For the 11 stations, diel variations in pH were determined to correspond to differences in the 10th percentile of CMC values by a median of 160 μg/L, ranging from 0 to 610 μg/L, and differences in the 10th percentile of CCC values by a median of 40 μg/L, ranging from 15 to 210 μg/L. The low monthly instantaneous CMC and CCC values that have the greatest effect on the minimum, 5th percentile, and 10th percentile aluminum values tend to result during the nongrowing season (October or November through March or April) when the range of diel variations in pH is small, thus minimizing the effect of diel variations in pH on the lowest CMC and CCC values. Historical water-quality data on organic carbon in Massachusetts streams were investigated using data retrieved from the USGS National Water Information System database. An assessment of the availability of historical pH, DOC, and hardness data indicated that more data were available for TOC than for DOC. A linear regression equation was developed for the relation between DOC and TOC concentrations to inform the potential use of available data to evaluate water-quality conditions at additional sites across Massachusetts where only pH, hardness, and TOC data are available. DOC and TOC concentrations were well correlated in the 223 samples in which both constituents were analyzed, and the equation had a coefficient of determination ( R 2 ) equal to 0.93.

Massachusetts↗

USGS2021

Manganese in the Northern Atlantic Coastal Plain aquifer system, eastern USA—Modeling regional occurrence with pH, redox, and machine learning

Study region : The study was conducted in the Northern Atlantic Coastal Plain aquifer system, eastern USA, an important water supply in a densely populated region. Study focus : Manganese (Mn), an emerging health concern and common nuisance contaminant in drinking water, is mapped and modeled using the XGBoost machine learning method, predictions of pH and redox conditions from previous models, and other explanatory variables that describe the groundwater flow system and surface characteristics. Methods to address the imbalanced occurrence of elevated and low Mn concentrations are compared and used to more accurately predict concentrations of interest for human health and drinking water quality. New hydrological insights for the region : Elevated Mn concentrations were more likely in shallow groundwater, close to recharge areas and in topographically low areas where soil or unsaturated processes influence groundwater quality. Predicted concentrations greater than the health threshold of 300 micrograms per liter extended across 17 % of the surficial aquifer area, but across <1% of the areas of underlying aquifers. pH and variables related to flow-system position and near-surface processes were more important predictors than the probability of low dissolved oxygen (DO). Mapped variable influence (SHAP values) showed that both pH and DO variables were related to hydrogeologic conditions. Class weights, which improved the predictive ability for elevated Mn without altering the data, was the preferred method to address class imbalance.

Maryland, New Jersey, New York, North Carolina, Pe↗

USGS2020

Machine-learning models to map pH and redox conditions in groundwater in a layered aquifer system, Northern Atlantic Coastal Plain, eastern USA

Study region The study was conducted in the Northern Atlantic Coastal Plain aquifer system, in the eastern USA. Study focus Groundwater pH and redox conditions are fundamental chemical characteristics controlling the distribution of many contaminants of concern for drinking water or the ecological health of receiving waters. In this study, pH and redox conditions were modeled and mapped in a complex, layered aquifer system. Machine-learning methods (boosted regression trees) were applied to data from 3000 to 5000 wells. Predicted pH and the probability of anoxic conditions, defined by three thresholds of dissolved oxygen (0.5, 1, and 2 mg/L), were mapped at the 1-km 2 scale for each of 10 regional aquifer layers. New Hydrological Insights for the Region Maps depict the extent of acidic groundwater and oxic conditions in the shallow, unconfined surficial aquifer and in unconfined, recharge-proximal areas of underlying aquifers, in contrast to alkaline and anoxic groundwater elsewhere. Geographic patterns and influential predictors–including elevation, overlying confining-units thickness, and simulated groundwater age and flux–are consistent with prior understanding of the processes controlling pH and redox in the aquifer system. The model-based maps support robust estimates of aquifer proportions, either areal or volumetric, likely to contain groundwater of a specified quality or be vulnerable to specific pH- or redox-sensitive contaminants. The machine-learning methods were an effective tool to map groundwater quality at the regional scale.

New Jersey, Maryland, Delaware, Virginia↗

USGS2017

Groundwater-quality data from the National Water-Quality Assessment Project, January through December 2014 and select quality-control data from May 2012 through December 2014

Groundwater-quality data were collected from 559 wells as part of the National Water-Quality Assessment Project of the U.S. Geological Survey National Water-Quality Program from January through December 2014. The data were collected from four types of well networks: principal aquifer study networks, which are used to assess the quality of groundwater used for public water supply; land-use study networks, which are used to assess land-use effects on shallow groundwater quality; major aquifer study networks, which are used to assess the quality of groundwater used for domestic supply; and enhanced trends networks, which are used to evaluate the time scales during which groundwater quality changes. Groundwater samples were analyzed for a large number of water-quality indicators and constituents, including major ions, nutrients, trace elements, volatile organic compounds, pesticides, radionuclides, and some constituents of special interest (arsenic speciation, chromium [VI] and perchlorate). These groundwater-quality data, along with data from quality-control samples, are tabulated in this report and in an associated data release.

Data Series↗

USGS2017

Using groundwater age distributions to understand changes in methyl tert-butyl ether (MtBE) concentrations in ambient groundwater, northeastern United States

Temporal changes in methyl tert-butyl ether (MtBE) concentrations in groundwater were evaluated in the northeastern United States, an area of the nation with widespread low-level detections of MtBE based on a national survey of wells selected to represent ambient conditions. MtBE use in the U.S. peaked in 1999 and was largely discontinued by 2007. Six well networks, each representing specific areas and well types (monitoring or supply wells), were each sampled at 10 year intervals between 1996 and 2012. Concentrations were decreasing or unchanged in most wells as of 2012, with the exception of a small number of wells where concentrations continue to increase. Statistically significant increasing concentrations were found in one network sampled for the second time shortly after the peak of MtBE use, and decreasing concentrations were found in two networks sampled for the second time about 10 years after the peak of MtBE use. Simulated concentrations from convolutions of estimates for concentrations of MtBE in recharge water with age distributions from environmental tracer data correctly predicted the direction of MtBE concentration changes in about 65 percent of individual wells. The best matches between simulated and observed concentrations were found when simulating recharge concentrations that followed the pattern of national MtBE use. Some observations were matched better when recharge was modeled as a plume moving past the well from a spill at one point in time. Modeling and sample results showed that wells with young median ages and narrow age distributions responded more quickly to changes in the contaminant source than wells with older median ages and broad age distributions. Well depth and aquifer type affect these responses. Regardless of the timing of decontamination, all of these aquifers show high susceptibility for contamination by a highly soluble, persistent constituent.

Science of the Total Environment↗

USGS2016

Changes in phosphorus concentrations and loads in the Assabet River, Massachusetts, October 2008 through April 2014

Treated effluent discharged from municipal wastewater-treatment plants to the Assabet River in central Massachusetts includes phosphorus, which leads to increased growth of nuisance aquatic plants that decrease the river’s water quality and aesthetics in impounded reaches during the growing season. To improve the river’s water quality and aesthetics, the U.S. Environmental Protection Agency approved a total maximum daily load for phosphorus in 2004 that directed the wastewater-treatment plants to reduce the amount of total phosphorus discharged to the river by 2012. The permitted total phosphorus monthly average of 0.75 milligrams per liter during the aquatic plant growing season (April 1 through October 31) was reduced by the total maximum daily load to a target of 0.1 milligrams per liter by 2012, and the nongrowing-season limit was unchanged at 1.0 milligrams per liter. From October 2008 through April 2014, the U.S. Geological Survey, in cooperation with the Massachusetts Department of Environmental Protection, measured streamflow and collected weekly flow-proportional, composite samples of water from the Assabet River for analysis of concentrations of total phosphorus and orthophosphate. Streamflow and concentration data were used to estimate total phosphorus and orthophosphate loads in the river. The purpose of this monitoring effort was to evaluate phosphorus concentrations and loads in the river before, during, and after the wastewater-treatment-plant upgrades and to assess the effects of seasonal differences in permitted discharges. The locations of water-quality-monitoring stations, with respect to the Hudson and Ben Smith impoundments, enabled examination of effects of phosphorus entering and leaving the impoundments. Annual median concentrations of total phosphorus in wastewater-treatment plants were reduced by more than 80 percent with the plant upgrades. Measured instream annual median concentrations of total phosphorus in the Assabet River decreased by about 38 to 50 percent at three of the four monitoring stations following the wastewater-treatment-plant upgrades. At the station farthest upstream, the median total phosphorus concentration remained unchanged throughout the study; this may be attributed to the site location and potential resuspension of particulate organic matter during periods of increased streamflow. Annual median loads from the wastewater-treatment plants were reduced by up to 91 percent following the upgrades, instream annual median total phosphorus loads at the three downstream stations decreased by 71 to 76 percent, and instream orthophosphate loads at the three downstream stations decreased by 79 to 87 percent. Seasonal fluctuations (growing versus nongrowing) of total phosphorus and orthophosphate were observed instream before the upgrades. However, after the upgrades, fluctuations in phosphorus released from the treatment plants were slight and seasonal changes were typically not observed instream. Annual loads entering and leaving the two impoundments were inconclusive in determining whether the impoundments were sources or sinks of total phosphorus during the study. Total phosphorus loads entering the Hudson impoundment were consistently greater than those leaving; however, there was uncertainty about the loads at the monitoring station upstream from this impoundment. At the Ben Smith impoundment, total phosphorus and orthophosphate loads downstream were slightly greater than those upstream from the impoundment, but the differences may reflect additions from tributaries and overland runoff. Estimated instream total phosphorus concentrations and loads indicated that the decreases in total phosphorus in wastewater-treatment-plant discharges were accompanied by reductions measured in the Assabet River. A statistical analysis which incorporates the effect of varying flow conditions demonstrated significant reductions in total phosphorus concentrations after the wastewater-treatment-plant upgrades at three of the four instream monitoring stations. No significant change was observed at the most upstream location, the Assabet River at Port Street at Hudson, Massachusetts (station number 01096835), which may have been affected by flow-related resuspension of particulate phosphorus.

Massachusetts↗

USGS2016

Environmental conditions in the Namskaket Marsh Area, Orleans, Massachusetts: A summary of studies by the U.S. Geological Survey, 1989–2011

Namskaket Marsh and its tidal creek system are potential receptors for a treated wastewater plume originating from a septage treatment facility in the northwest part of Orleans, Massachusetts, on Cape Cod. From 1989 to 2011, the U.S. Geological Survey, in cooperation with State and local partners, conducted a series of studies in the Namskaket Marsh area to characterize the potential effects of the plume on the marsh and its tidal creek system. Studies included characterizing the baseline vegetation and salinity distribution in the marsh, monitoring the movement of the wastewater plume downgradient of the septage treatment facility, and sampling nutrient concentrations in the tidal creek system during a baseline period prior to the arrival of the plume at the marsh boundary. The Inner Namskaket Marsh baseline vegetation survey in 1995 found it to be dominated by Phragmites australis (common reed, 44 percent of vegetative cover), Spartina patens (salt marsh hay, 17 percent), and Spartina alterniflora (cordgrass, 9 percent). Phragmites occurrence was correlated with shallow pore-water salinity in the marsh peat and was largely confined to areas with salinities less than 4 parts per thousand. Baseline, ebb-tide nutrient concentrations at the tidal creek sampling stations during 1994–96 showed strong seasonal variations for ammonium, likely associated with the seasonal cycle of growth and senescence for the dominant salt marsh grasses ( S. alterniflora and S. patens ). The seasonal cycle for nitrate was generally less pronounced. The movement of the wastewater plume has been monitored from its source at the septage treatment facility to areas immediately adjacent to and beneath the most inland part of the marsh. In late 1994, the plume was first detected by borehole geophysical logging in observation wells along the Cape Cod Rail Trail (rail trail), 600 feet northwest of the infiltration beds, at an elevation of 47 to 53 feet below the National Geodetic Vertical Datum of 1929 (NGVD 29). At the rail trail, the plume was largely confined below a 3- to 8-foot-thick silt/clay layer detected by borehole geophysical logging and confirmed by lithologic samples. By early 1998, a second plume segment was detected above this silt/clay layer at the rail trail, near the plume’s southwest boundary. Groundwater sampling in 2003–4 at additional stations southwest of the main plume, as well as beneath Namskaket Marsh, defined the extent of this shallow plume segment in glacial sands underlying the marsh. The tidal creek sampling stations established in the 1990s were resampled in 2003–4 and 2010–11 to evaluate potential effects of the treated wastewater plume on creek water quality. The annual medians of the 2011 biweekly nitrate and total dissolved nitrogen concentrations were determined for each station and compared to the annual medians of biweekly samples for the baseline years 1994, 1995, and 1996. At all stations, the 2011 median nitrate concentrations were within the range of medians for the 3 baseline years. A similar result was obtained for total dissolved nitrogen. We conclude that the 2011 creek samples, collected approximately 8 years after the shallow plume segment was first detected beneath the marsh, do not show evidence of elevated nitrate or total dissolved nitrogen concentrations attributable to discharge of either the shallow or deep segments of the treated wastewater plume.

Massachusetts↗

USGS2016

Groundwater quality data from the National Water-Quality Assessment Project, May 2012 through December 2013

Groundwater-quality data were collected from 748 wells as part of the National Water-Quality Assessment Project of the U.S. Geological Survey National Water-Quality Program from May 2012 through December 2013. The data were collected from four types of well networks: principal aquifer study networks, which assess the quality of groundwater used for public water supply; land-use study networks, which assess land-use effects on shallow groundwater quality; major aquifer study networks, which assess the quality of groundwater used for domestic supply; and enhanced trends networks, which evaluate the time scales during which groundwater quality changes. Groundwater samples were analyzed for a large number of water-quality indicators and constituents, including major ions, nutrients, trace elements, volatile organic compounds, pesticides, and radionuclides. These groundwater quality data are tabulated in this report. Quality-control samples also were collected; data from blank and replicate quality-control samples are included in this report.

Data Series↗

USGS2015

Methods for evaluating potential sources of chloride in surface waters and groundwaters of the conterminous United States

Chloride exists as a major ion in most natural waters, but many anthropogenic sources are increasing concentrations of chloride in many receiving waters. Although natural concentrations in continental waters can be as high as 200,000 milligrams per liter, chloride concentrations that are suitable for freshwater ecology, human consumption, and agricultural and industrial water uses commonly are on the order of 10 to 1,000 milligrams per liter. “Road salt” frequently is identified as the sole source of anthropogenic chloride, but only about 30 percent of the salt consumed and released to the environment is used for deicing. Furthermore, several studies in Southern States where the use of deicing salt is minimal also show anthropogenic chloride in rising concentrations and in strong correlation to imperviousness and road density. This is because imperviousness and road density also are strongly correlated to population density. The term “road salt” is a misnomer because deicers applied to parking lots, sidewalks, and driveways can be a substantial source of chloride in some catchments because these land covers are comparable to roadways as a percentage of the total impervious area and commonly receive higher salt application rates than some roadways. Other sources of anthropogenic chloride include wastewater, dust control on unpaved roads, fertilizer, animal waste, irrigation, aquaculture, energy production wastes, and landfill leachates. The assumption that rising chloride concentrations in surface water or groundwater is indicative of contamination by deicing chemicals rather than one or more other potential sources may preclude the identification of toxic, carcinogenic, mutagenic, or endocrine-disrupting contaminants that are associated with many sources of elevated chloride concentrations. Once the sources of anthropogenic chloride in an area of interest have been identified and measured, water and solute budgets can be estimated to guide decisionmakers to identify and apply potential mitigation measures that can reduce the problem. Scientists, engineers, regulators, and decisionmakers need information about potential sources of chloride, water and solute budgets, and methods for collecting water-quality data to help identify potential sources. This information is needed to evaluate potential sources of chloride in areas where chloride may have adverse ecological effects or may degrade water supplies used for drinking water, agriculture, or industry. Knowledge of potential sources will help decisionmakers identify the best mitigation measures to reduce the total background chloride load, thereby reducing the potential for water-quality exceedances that occur because of superposition on rising background concentrations. Also, knowledge of potential sources may help decisionmakers identify the potential for the presence of contaminants that have toxic, carcinogenic, mutagenic, or endocrine-disrupting effects at concentrations that are lower by orders of magnitude than the chloride concentrations in the source water. This report is a comprehensive synthesis of relevant information, but it is not the result of an exhaustive search for literature on each topic. The potential adverse effects of chloride on infrastructure and the environment are not discussed in this report because these issues have been extensively documented elsewhere.

Open-File Report↗

USGS2015

The quality of our Nation's waters: Water quality in principal aquifers of the United States, 1991-2010

About 130 million people in the United States rely on groundwater for drinking water, and the need for high-quality drinking-water supplies becomes more urgent as our population grows. Although groundwater is a safe, reliable source of drinking water for millions of people nationwide, high concentrations of some chemical constituents can pose potential human-health concerns. Some of these contaminants come from the rocks and sediments of the aquifers themselves, and others are chemicals that we use in agriculture, industry, and day-to-day life. When groundwater supplies are contaminated, millions of dollars can be required for treatment so that the supplies can be usable. Contaminants in groundwater can also affect the health of our streams and valuable coastal waters. By knowing where contaminants occur in groundwater, what factors control contaminant concentrations, and what kinds of changes in groundwater quality might be expected in the future, we can ensure the availability and quality of this vital natural resource in the future.

Circular↗

USGS2015

Nutrient, suspended sediment, and trace element loads in the Blackstone River Basin in Massachusetts and Rhode Island, 2007 to 2009

Nutrients, suspended sediment, and trace element loads in the Blackstone River and selected tributaries were estimated from composite water-quality samples in order to better understand the distribution and sources of these constituents in the river basin. The flow-proportional composite water-quality samples were collected during sequential 2-week periods at six stations along the river’s main stem, at three stations on tributaries, and at four wastewater treatment plants in the Massachusetts segment of the basin from June 2007 to September 2009. Samples were collected at an additional station on the Blackstone River near the mouth in Pawtucket, Rhode Island, from September 2008 to September 2009. The flow-proportional composite samples were used to estimate average daily loads during the sampling periods; annual loads for water years 2008 and 2009 also were estimated for the monitoring station on the Blackstone River near the Massachusetts-Rhode Island border. The effects of hydrologic conditions and net attenuation of nitrogen were investigated for loads in the Massachusetts segment of the basin. Sediment resuspension and contaminant loading dynamics were evaluated in two Blackstone River impoundments, the former Rockdale Pond (a breached impoundment) and Rice City Pond. Total nitrogen and phosphorus loads along the Blackstone River in Massachusetts showed similar general patterns during the sampling periods monitored in this study. Total nitrogen loads were relatively low at the farthest upstream monitoring station in Millbury, Massachusetts (typically less than 430 kilograms per day (kg/d) for total nitrogen and 37 kg/d for total phosphorus). Loads typically increased (5- to 10-fold for nitrogen and 6- to 15-fold for phosphorus) downstream from the first, large wastewater treatment plant along the river, the Upper Blackstone Water Pollution Control Abatement District in Millbury. Further downstream, total nitrogen and phosphorus loads remained elevated but variable (typically about 1,000 to 3,000 kg/d for nitrogen and about 100 to 370 kg/d for phosphorus) from Millbury to the Massachusetts-Rhode Island border near Millville, Mass. Monitored tributaries of the Blackstone River and wastewater treatment plants other than the Upper Blackstone Water Pollution Control Abatement District rarely contributed more than a small fraction of the total nitrogen and phosphorus loads observed at the main stem monitoring stations. Loads of suspended sediment also were substantially larger along the river’s main stem than in tributaries during most sampling periods. Very large loads of suspended sediment from the West River tributary during several sampling periods may have been associated with flood-control operations. The estimated annual load of total nitrogen in the Blackstone River at Millville, about 1.3 miles upstream from the Massachusetts-Rhode Island border, was 936,000 kilograms (kg) (2,600 kg/d) in water year 2008 and 878,000 kg (2,400 kg/d) in water year 2009. The estimated annual load of total phosphorus at Millville was 81,400 kg in water year 2008 (223 kg/d) and 80,900 kg (222 kg/d) in water year 2009. The estimated annual load of suspended sediment in was 4,940,000 kg (13,600 kg/d) in water year 2008 and 7,040,000 kg (19,300 kg/d) in water year 2009. The higher load in water year 2009 likely reflects several large storms in summer 2009, which resulted in streamflows in the Blackstone River that were 10 times the typical July flows. Loads of total nitrogen, total phosphorus, and trace elements were almost always lower in the Blackstone River at Millville than in the river near its mouth at the Pawtucket monitoring station, when loads were monitored at both stations in the latter part of water year 2008 and in water year 2009. Loads of suspended sediment at Millville and Pawtucket varied by about the same range, but were usually lower at Pawtucket than at Millville. Total nitrogen loads were higher during sampling periods when the base-flow contribution to streamflow was substantially less than the runoff contribution than in sampling periods when the base-flow dominated. During these sampling periods when the runoff component of streamflow was relatively large, loads of total nitrogen in wastewater discharge from Upper Blackstone Water Pollution Control Abatement District also were high but also constituted smaller fractions of the total nitrogen loads in the river. Nitrogen attenuation may have occurred during some sampling periods, based on net changes in total nitrogen load between consecutive monitoring stations, especially in the Blackstone River reach between the South Grafton and Uxbridge monitoring stations. Analysis of the representative constituents (total phosphorus, total chromium, and suspended sediment) upstream and downstream of impoundments indicated that the existing impoundments, such as Rice City Pond, can be sources of particulate contaminant loads in the Blackstone River. Loads of particulate phosphorus, particulate chromium, and suspended sediment were consistently higher downstream from Rice City Pond than upstream during high-flow events, and there was a positive, linear relation between streamflow and changes in these constituents from upstream to downstream of the impoundment. Thus, particulate contaminants were mobilized from Rice City Pond during high-flow events and transported downstream. In contrast, downstream loads of particulate phosphorus, particulate chromium, and suspended sediment were generally lower than or equal to upstream loads for the former Rockdale Pond impoundment. Sediments associated with the former impoundment at Rockdale Pond, breached in the late 1960s, did not appear to be mobilized during the high-flow events monitored during this study.

Massachusetts, Rhode Island↗

USGS2012

Yield of bedrock wells in the Nashoba terrane, central and eastern Massachusetts

The yield of bedrock wells in the fractured-bedrock aquifers of the Nashoba terrane and surrounding area, central and eastern Massachusetts, was investigated with analyses of existing data. Reported well yield was compiled for 7,287 wells from Massachusetts Department of Environmental Protection and U.S. Geological Survey databases. Yield of these wells ranged from 0.04 to 625 gallons per minute. In a comparison with data from 103 supply wells, yield and specific capacity from aquifer tests were well correlated, indicating that reported well yield was a reasonable measure of aquifer characteristics in the study area. Statistically significant relations were determined between well yield and a number of cultural and hydrogeologic factors. Cultural variables included intended water use, well depth, year of construction, and method of yield measurement. Bedrock geology, topography, surficial geology, and proximity to surface waters were statistically significant hydrogeologic factors. Yield of wells was higher in areas of granites, mafic intrusive rocks, and amphibolites than in areas of schists and gneisses or pelitic rocks; higher in valleys and low-slope areas than on hills, ridges, or high slopes; higher in areas overlain by stratified glacial deposits than in areas overlain by till; and higher in close proximity to streams, ponds, and wetlands than at greater distances from these surface-water features. Proximity to mapped faults and to lineaments from aerial photographs also were related to well yield by some measures in three quadrangles in the study area. Although the statistical significance of these relations was high, their predictive power was low, and these relations explained little of the variability in the well-yield data. Similar results were determined from a multivariate regression analysis. Multivariate regression models for the Nashoba terrane and for a three-quadrangle subarea included, as significant variables, many of the cultural and hydrogeologic factors that were individually related to well yield, in ways that are consistent with conceptual understanding of their effects, but the models explained only 21 percent (regional model for the entire terrane) and 30 percent (quadrangle model) of the overall variance in yield. Moreover, most of the explained variance was due to well characteristics rather than hydrogeologic factors. Hydrogeologic factors such as topography and geology are likely important. However, the overall high variability in the well-yield data, which results from the high variability in aquifer hydraulic properties as well as from limitations of the dataset, would make it difficult to use hydrogeologic factors to predict well yield in the study area. Geostatistical analysis (variograms), on the other hand, indicated that, although highly variable, the well-yield data are spatially correlated. The spatial continuity appears greater in the northeast-southwest direction and less in the southeast-northwest direction, directions that are parallel and perpendicular, respectively, to the regional geologic structural trends. Geostatistical analysis (kriging), used to estimate yield values throughout the study area, identified regional-scale areas of higher and lower yield that may be related to regional structural features—in particular, to a northeast-southwest trending regional fault zone within the Nashoba terrane. It also would be difficult to use kriging to predict yield at specific locations, however, because of the spatial variability in yield, particularly at small scales. The regional-scale analyses in this study, both with hydrogeologic variables and geostatistics, provide a context for understanding the variability in well yield, rather a basis for precise predictions, and site-specific information would be needed to understand local conditions.

Massachusetts↗

USGS2010

Indicators of streamflow alteration, habitat fragmentation, impervious cover, and water quality for Massachusetts stream basins

Massachusetts streams and stream basins have been subjected to a wide variety of human alterations since colonial times. These alterations include water withdrawals, treated wastewater discharges, construction of onsite septic systems and dams, forest clearing, and urbanization—all of which have the potential to affect streamflow regimes, water quality, and habitat integrity for fish and other aquatic biota. Indicators were developed to characterize these types of potential alteration for subbasins and groundwater contributing areas in Massachusetts. The potential alteration of streamflow by the combined effects of withdrawals and discharges was assessed under two water-use scenarios. Water-use scenario 1 incorporated publicly reported groundwater withdrawals and discharges, direct withdrawals from and discharges to streams, and estimated domestic-well withdrawals and septic-system discharges. Surface-water-reservoir withdrawals were excluded from this scenario. Water-use scenario 2 incorporated all the types of withdrawal and discharge included in scenario 1 as well as withdrawals from surface-water reservoirs—all on a long-term, mean annual basis. All withdrawal and discharge data were previously reported to the State for the 2000–2004 period, except domestic-well withdrawals and septic-system discharges, which were estimated for this study. The majority of the state’s subbasins and groundwater contributing areas were estimated to have relatively minor (less than 10 percent) alteration of streamflow under water-use scenario 1 (seasonally varying water use; no surface-water-reservoir withdrawals). However, about 12 percent of subbasins and groundwater contributing areas were estimated to have extensive alteration of streamflows (greater than 40 percent) in August; most of these basins were concentrated in the outer metropolitan Boston region. Potential surcharging of streamflow in August was most commonly indicated for main-stem river subbasins, although surcharging was also indicated for some smaller tributary subbasins. In the high-flow month of April, only 4.8 percent of subbasins and groundwater contributing areas had more than 10 percent potential flow alteration. A majority of the state’s subbasins and groundwater contributing areas were also indicated to have relatively minor alteration of streamflow under water-use scenario 2 (long-term average water use, including surface-water-reservoir withdrawals). Extensive alteration of mean annual flows was estimated for about 6 percent of the state’s subbasins and groundwater contributing areas. The majority of subbasins estimated to have extensive long-term flow alteration contained reservoirs that were specifically designed, constructed, and managed to supply drinking water to cities. Only a small number of subbasins and groundwater contributing areas (1 percent) were extensively surcharged on a long-term, mean annual basis. Because site-specific data concerning surface-water-reservoir storage dynamics and management practices are not available statewide, the seasonal effects of surface-water-reservoir withdrawals on downstream flows could not be assessed in this study. The impounded storage ratio (volume of impounded subbasin or groundwater-contributing-area storage divided by mean annual predevelopment outflow from the subbasin or contributing area, in units of days) indicates the potential for alteration of streamflow, sediment-transport, and temperature regimes by dams, independent of water use. Storage ratios were less than 1 day for 33 percent of the subbasins and groundwater contributing areas, greater than 1 month for about 40 percent of the cases, and greater than 1 year for 3.2 percent of the cases statewide. Dam density, an indicator of stream-habitat fragmentation by dams, averaged 1 dam for every 6.7 stream miles statewide. Many of these dams are not presently (2009) being managed. The highest dam densities were in portions of Worcester County and in the Plymouth-Carver region, respectively, reflecting the historical reliance of Massachusetts industry upon water power and agricultural water-management practices in southeastern Massachusetts. Impervious cover is a frequently used indicator of urban land use. About 33 percent of the state’s 1,429 subbasins and groundwater contributing areas are relatively undeveloped at the local scale, with a local impervious cover of less than 4 percent. About 18 percent of Massachusetts subbasins and contributing areas are highly developed, with a local impervious cover greater than 16 percent. The remaining 49 percent of subbasins and contributing areas have levels of urban development between these extremes (4 to 16 percent local impervious cover). Cumulative impervious cover, defined for the entire upstream area encompassed by each subbasin, shows a smaller range (0 to 55 percent) than local impervious cover. Both local and cumulative impervious cover were highest in metropolitan Boston and other urban centers. High elevated impervious-cover values were also found along major transportation corridors. The water-quality status of Massachusetts streams is assessed periodically by the Massachusetts Department of Environmental Protection pursuant to the requirements of the Federal Clean Water Act. Streams selected for assessment are commonly located in larger subbasins where some degree of impairment is expected. In the 72 percent of the state’s subbasins and groundwater contributing areas with assessed streams in 2002, more than 50 percent of the assessed stream miles were considered impaired. All of the assessed stream miles were considered impaired in 66 percent of the subbasins and groundwater contributing areas with assessed streams. Large streams, such as the main stems of rivers that make up most of the assessed stream miles, also are in many cases the receiving waters for treated wastewater discharges and for this reason may be more susceptible to water-quality impairments than smaller streams. Subbasins and contributing areas with large fractions of assessed stream miles that are listed as impaired are distributed across the state, but are more prevalent in eastern Massachusetts.

Massachusetts↗

USGS2009

The quality of our nation’s waters: Quality of water from domestic wells in principal aquifers of the United States, 1991–2004— Overview of major findings

More than 43 million people - about 15 percent of the U.S. population - rely on domestic wells as their source of drinking water (Hutson and others, 2004). The quality and safety of water from domestic wells, also known as private wells, are not regulated by the Federal Safe Drinking Water Act or, in most cases, by state laws. Rather, individual homeowners are responsible for maintaining their domestic well systems and for monitoring water quality. The lack of regular monitoring of domestic wells makes periodic assessments at national, regional, and local scales important sources for providing information about this key source of drinking water. This study from the National Water-Quality Assessment (NAWQA) Program of the U.S. Geological Survey (USGS) assesses water-quality conditions for about 2,100 domestic wells. The sampled wells are located in 48 states and in parts of 30 regionally extensive aquifers used for water supply in the United States. As many as 219 properties and contaminants, including pH, major ions, nutrients, trace elements, radon, pesticides, and volatile organic compounds (VOCs), were measured. Fecal indicator bacteria and additional radionuclides were analyzed for a smaller number of wells. The large number of contaminants assessed and the broad geographic coverage of the present study provides a foundation for an improved understanding of the quality of water from the major aquifers tapped by domestic supply wells in the United States.

Circular↗

USGS2009

Water Withdrawals, Use, and Wastewater Return Flows in the Concord River Basin, Eastern Massachusetts, 1996-2000

Water withdrawals, use, and wastewater return flows for the Concord River Basin were estimated for the period 1996-2000. The study area in eastern Massachusetts is 400 square miles in area and includes the basins of two major tributaries, the Assabet and Sudbury Rivers, along with the Concord River, which starts at the confluence of the two tributaries. About 400,000 people lived in the basin during the study period, on the basis of an analysis of census data, land use, and population density. Public water systems served an estimated 87 percent of the people in the basin, and public wastewater systems served an estimated 65 percent of the basin population. The estimates of water withdrawals, use, wastewater return flows, and imports and exports for the Concord River Basin and 25 subbasins provide information that can be used in hydrologic analyses such as water budgets and can guide water-resources allocations for human and environmental needs. Withdrawals in the basin were estimated at 12,700 million gallons per year (Mgal/yr) during the study period, of which 10,100 Mgal/yr (about 80 percent) were withdrawn by public water-supply systems and 2,650 Mgal/yr were self-supplied by individual users. Water use in the basin and subbasins was estimated by using water withdrawals, average per capita use rates (about 72 gallons per day per person), land-use data, estimated population densities, and other information. Total water use in the basin, which included imports, was 19,200 Mgal/yr and was provided mostly (86.2 percent) by public supply. Domestic use (11,300 Mgal/yr) was the largest component, accounting for about 60 percent of total water use in the basin. Commercial use (3,770 Mgal/yr), industrial use (1,330 Mgal/yr), and agricultural use (including golf-course irrigation; 562 Mgal/yr) accounted for 19.6, 6.9, and 2.9 percent, respectively, of total use. Water that was unaccounted for in public-supply systems was estimated at 2,260 Mgal/yr, or 11.8 percent of total water use in the basin. Wastewater return flows discharged in the basin were estimated at 11,800 Mgal/yr, of which 6,620 Mgal/yr were discharged from municipal wastewater-treatment facilities to surface waters and 5,190 Mgal/yr were self-disposed through septic systems to ground water; wastewater disposed through septic systems was generated by both public- and self-supply use. Water use and management in the Concord River Basin resulted in an estimated import of 6,460 Mgal/yr of potable water for public supply and an estimated export of 6,590 Mgal/yr of wastewater. Water was imported into the Assabet, Sudbury, and Lower Concord (the area draining directly to the Concord River) River Basins for public supply. Wastewater was imported into the Assabet River Basin, but exported from the Sudbury and Lower Concord River Basins. Of the 25 subbasins in the Concord River Basin for which water use was analyzed, 20 subbasins imported potable water, 4 subbasins exported potable water (Fort Meadow Brook, Indian Brook, Lower Sudbury River, and Whitehall Brook), and potable water was neither imported nor exported in one subbasin (Elizabeth Brook). Wastewater was imported into the Assabet Headwaters, Assabet Main Stem, and Hop Brook subbasins; wastewater was neither imported to nor exported from the Elizabeth Brook, Nashoba Brook, and Pine Brook subbasins; and wastewater was exported from all other subbasins. Water use and management in the basin also resulted in a net transfer of water from ground water to surface water, discharged as wastewater, of about 4,000 Mgal/yr.

Scientific Investigations Report↗

USGS2009

Quality of Water from Domestic Wells in Principal Aquifers of the United States, 1991-2004

As part of the National Water-Quality Assessment Program of the U.S. Geological Survey (USGS), water samples were collected during 1991-2004 from domestic wells (private wells used for household drinking water) for analysis of drinking-water contaminants, where contaminants are considered, as defined by the Safe Drinking Water Act, to be all substances in water. Physical properties and the concentrations of major ions, trace elements, nutrients, radon, and organic compounds (pesticides and volatile organic compounds) were measured in as many as 2,167 wells; fecal indicator bacteria and radionuclides also were measured in some wells. The wells were located within major hydrogeologic settings of 30 regionally extensive aquifers used for water supply in the United States. One sample was collected from each well prior to any in-home treatment. Concentrations were compared to water-quality benchmarks for human health, either U.S. Environmental Protection Agency (USEPA) Maximum Contaminant Levels (MCLs) for public water supplies or USGS Health-Based Screening Levels (HBSLs). No individual contaminant was present in concentrations greater than available health benchmarks in more than 8 percent of the sampled wells. Collectively, however, about 23 percent of wells had at least 1 contaminant present at concentrations greater than an MCL or HBSL, based on analysis of samples from 1,389 wells in which most contaminants were measured. Radon, nitrate, several trace elements, fluoride, gross alpha- and beta-particle radioactivity, and fecal indicator bacteria were found most frequently (in one or more percent of wells) at concentrations greater than benchmarks and, thus, are of potential concern for human health. Radon concentrations were greater than the lower of two proposed MCLs (300 picocuries per liter or pCi/L) in about 65 percent of the wells and greater than the higher proposed MCL (4,000 pCi/L) in about 4 percent of wells. Nitrate, arsenic, manganese, strontium, and gross alpha-particle radioactivity (uncorrected) each were present at levels greater than MCLs or HBSLs in samples from about 5 to 7 percent of the wells; boron, fluoride, uranium, and gross beta-particle radioactivity were present at levels greater than MCLs or HBSLs in about 1 to 2 percent of the wells. Total coliform and Escherichia coli bacteria were detected in about 34 and 8 percent, respectively, of sampled wells. Thus, with the exception of nitrate and fecal indicator bacteria, the contaminants that were present in the sampled wells most frequently at concentrations greater than human-health benchmarks were naturally occurring. Anthropogenic organic compounds were frequently detected at low concentrations, using typical analytical detection limits of 0.001 to 0.1 micrograms per liter, but were seldom present at concentrations greater than MCLs or HBSLs. The most frequently detected compounds included the pesticide atrazine, its degradate deethylatrazine, and the volatile organic compounds chloroform, methyl tert-butyl ether, perchloroethene, and dichlorofluoromethane. Only 7 of 168 organic compounds were present in samples at concentrations greater than MCLs or HBSLs, each in less than 1 percent of wells. These were diazinon, dibromochloroprane, dinoseb, dieldrin, ethylene dibromide, perchloroethene, and trichloroethene. Overall, concentrations of any organic compound greater than MCLs or HBSLs were present in 0.8 percent of wells, and concentrations of any organic compound greater than one-tenth of MCLs or HBSLs were present in about 3 percent of wells. Several other properties and contaminants were measured at values or concentrations outside of recommended ranges for drinking water for aesthetic quality (for example, taste or odor) or other non-health reasons. About 16 percent of the sampled wells had pH values less than (14.4 percent) or greater than (1.9 percent) the USEPA recommended range of 6.5 to 8.5. Total dissolved solids were greater than th

Scientific Investigations Report↗