Geology topics

Laurence A. Soderblom

Publications and source records attributed to Laurence A. Soderblom.

At least 55 records · Page 3Linked to original sources

USGS2004

Localization and physical property experiments conducted by opportunity at Meridiani Planum

The location of the Opportunity landing site was determined to better than 10-m absolute accuracy from analyses of radio tracking data. We determined Rover locations during traverses with an error as small as several centimeters using engineering telemetry and overlapping images. Topographic profiles generated from rover data show that the plains are very smooth from meter- to centimeter-length scales, consistent with analyses of orbital observations. Solar cell output decreased because of the deposition of airborne dust on the panels. The lack of dust-covered surfaces on Meridiani Planum indicates that high velocity winds must remove this material on a continuing basis. The low mechanical strength of the evaporitic rocks as determined from grinding experiments, and the abundance of coarse-grained surface particles argue for differential erosion of Meridiani Planum.

Science↗

USGS2004

In situ evidence for an ancient aqueous environment at Meridiani Planum, Mars

Sedimentary rocks at Eagle crater in Meridiani Planum are composed of fine-grained siliciclastic materials derived from weathering of basaltic rocks, sulfate minerals (including magnesium sulfate and jarosite) that constitute several tens of percent of the rock by weight, and hematite. Cross-stratification observed in rock outcrops indicates eolian and aqueous transport. Diagenetic features include hematite-rich concretions and crystal-mold vugs. We interpret the rocks to be a mixture of chemical and siliciclastic sediments with a complex diagenetic history. The environmental conditions that they record include episodic inundation by shallow surface water, evaporation, and desiccation. The geologic record at Meridiani Planum suggests that conditions were suitable for biological activity for a period of time in martian history.

Science↗

USGS2004

Soils of eagle crater and Meridiani Planum at the opportunity Rover landing site

The soils at the Opportunity site are fine-grained basaltic sands mixed with dust and sulfate-rich outcrop debris. Hematite is concentrated in spherules eroded from the strata. Ongoing saltation exhumes the spherules and their fragments, concentrating them at the surface. Spherules emerge from soils coated, perhaps from subsurface cementation, by salts. Two types of vesicular clasts may represent basaltic sand sources. Eolian ripples, armored by well-sorted hematite-rich grains, pervade Meridiani Planum. The thickness of the soil on the plain is estimated to be about a meter. The flatness and thin cover suggest that the plain may represent the original sedimentary surface.

Science↗

USGS2004

Pancam multispectral imaging results from the opportunity Rover at Meridiani Planum

Panoramic Camera (Pancam) images from Meridiani Planum reveal a low-albedo, generally flat, and relatively rock-free surface. Within and around impact craters and fractures, laminated outcrop rocks with higher albedo are observed. Fine-grained materials include dark sand, bright ferric iron-rich dust, angular rock clasts, and millimeter-size spheroidal granules that are eroding out of the laminated rocks. Spectra of sand, clasts, and one dark plains rock are consistent with mafic silicates such as pyroxene and olivine. Spectra of both the spherules and the laminated outcrop materials indicate the presence of crystalline ferric oxides or oxyhydroxides. Atmospheric observations show a steady decline in dust opacity during the mission. Astronomical observations captured solar transits by Phobos and Deimos and time-lapse observations of sunsets.

Science↗

USGS2004

The opportunity Rover's Athena science investigation at Meridiani Planum, Mars

The Mars Exploration Rover Opportunity has investigated the landing site in Eagle crater and the nearby plains within Meridiani Planum. The soils consist of fine-grained basaltic sand and a surface lag of hematite-rich spherules, spherule fragments, and other granules. Wind ripples are common. Underlying the thin soil layer, and exposed within small impact craters and troughs, are flat-lying sedimentary rocks. These rocks are finely laminated, are rich in sulfur, and contain abundant sulfate salts. Small-scale cross-lamination in some locations provides evidence for deposition in flowing liquid water. We interpret the rocks to be a mixture of chemical and siliciclastic sediments formed by episodic inundation by shallow surface water, followed by evaporation, exposure, and desiccation. Hematite-rich spherules are embedded in the rock and eroding from them. We interpret these spherules to be concretions formed by postdepositional diagenesis, again involving liquid water.

Science↗

USGS2004

Textures of the soils and rocks at Gusev Crater from Spirit’s Microscopic Imager

The Microscopic Imager on the Spirit rover analyzed the textures of the soil and rocks at Gusev crater on Mars at a resolution of 100 micrometers. Weakly bound agglomerates of dust are present in the soil near the Columbia Memorial Station. Some of the brushed or abraded rock surfaces show igneous textures and evidence for alteration rinds, coatings, and veins consistent with secondary mineralization. The rock textures are consistent with a volcanic origin and subsequent alteration and/or weathering by impact events, wind, and possibly water.

Science↗

USGS2004

Preparing for THEMIS controlled global Mars mosaics

We have begun work to prepare for producing controlled 2001 Mars Odyssey THEMIS infrared (IR) and visible (VIS) global mosaics of Mars. This effort is being coordinated with colleagues from Arizona State University and on the THEMIS team who plan to address radiometric issues in making such mosaics. We are concentrating on geometric issues. Several areas of investigation are now in progress, including: a) characterizing the absolute pointing accuracy of THEMIS images; b) investigating whether automatic tie point matching algorithms could be used to provide connections between overlapping THEMIS images; c) developing algorithms to allow for the photogrammetric (bundle) adjustment of the THEMIS IR (line scanner) camera images. Our primary goal in this pilot study effort will be to make several test control THEMIS mosaics and better determine which methods could be used, which require development, and what level of effort is required, in order to make large regional or global controlled THEMIS mosaics.

Conference Paper↗

USGS2003

High-resolution topomapping of candidate MER landing sites with Mars Orbiter Camera narrow-angle images

We analyzed narrow‐angle Mars Orbiter Camera (MOC‐NA) images to produce high‐resolution digital elevation models (DEMs) in order to provide topographic and slope information needed to assess the safety of candidate landing sites for the Mars Exploration Rovers (MER) and to assess the accuracy of our results by a variety of tests. The mapping techniques developed also support geoscientific studies and can be used with all present and planned Mars‐orbiting scanner cameras. Photogrammetric analysis of MOC stereopairs yields DEMs with 3‐pixel (typically 10 m) horizontal resolution, vertical precision consistent with ∼0.22 pixel matching errors (typically a few meters), and slope errors of 1–3°. These DEMs are controlled to the Mars Orbiter Laser Altimeter (MOLA) global data set and consistent with it at the limits of resolution. Photoclinometry yields DEMs with single‐pixel (typically ∼3 m) horizontal resolution and submeter vertical precision. Where the surface albedo is uniform, the dominant error is 10–20% relative uncertainty in the amplitude of topography and slopes after “calibrating” photoclinometry against a stereo DEM to account for the influence of atmospheric haze. We mapped portions of seven candidate MER sites and the Mars Pathfinder site. Safety of the final four sites (Elysium, Gusev, Isidis, and Meridiani) was assessed by mission engineers by simulating landings on our DEMs of “hazard units” mapped in the sites, with results weighted by the probability of landing on those units; summary slope statistics show that most hazard units are smooth, with only small areas of etched terrain in Gusev crater posing a slope hazard.

Journal of Geophysical Research E: Planets↗

USGS2003

Athena Microscopic Imager investigation

The Athena science payload on the Mars Exploration Rovers (MER) includes the Microscopic Imager (MI). The MI is a fixed‐focus camera mounted on the end of an extendable instrument arm, the Instrument Deployment Device (IDD). The MI was designed to acquire images at a spatial resolution of 30 microns/pixel over a broad spectral range (400–700 nm). The MI uses the same electronics design as the other MER cameras but has optics that yield a field of view of 31 × 31 mm across a 1024 × 1024 pixel CCD image. The MI acquires images using only solar or skylight illumination of the target surface. A contact sensor is used to place the MI slightly closer to the target surface than its best focus distance (about 66 mm), allowing concave surfaces to be imaged in good focus. Coarse focusing (∼2 mm precision) is achieved by moving the IDD away from a rock target after the contact sensor has been activated. The MI optics are protected from the Martian environment by a retractable dust cover. The dust cover includes a Kapton window that is tinted orange to restrict the spectral bandpass to 500–700 nm, allowing color information to be obtained by taking images with the dust cover open and closed. MI data will be used to place other MER instrument data in context and to aid in petrologic and geologic interpretations of rocks and soils on Mars.

Journal of Geophysical Research E: Planets↗

USGS2002

Observations of comet 19P/Borrelly by the miniature integrated camera and spectrometer aboard deep space 1

The nucleus of the Jupiter-family comet 19P/Borrelly was closely observed by the Miniature Integrated Camera and Spectrometer aboard the Deep Space 1 spacecraft on 22 September 2001. The 8-kilometer-long body is highly variegated on a scale of 200 meters, exhibiting large albedo variations (0.01 to 0.03) and complex geologic relationships. Short-wavelength infrared spectra (1.3 to 2.6 micrometers) show a slope toward the red and a hot, dry surface (≤345 kelvin, with no trace of water ice or hydrated minerals), consistent with ∼10% or less of the surface actively sublimating. Borrelly's coma exhibits two types of dust features: fans and highly collimated jets. At encounter, the near-nucleus coma was dominated by a prominent dust jet that resolved into at least three smaller jets emanating from a broad basin in the middle of the nucleus. Because the major dust jet remained fixed in orientation, it is evidently aligned near the rotation axis of the nucleus.

Science↗

USGS2002

USGS and DLR topographic mapping of Comet Borrelly

In the fall of 2001, NASA's Deep Space 1 (DS1) probe imaged Comet Borrelly during a flyby encounter. Three of the Borrelly images have geometry suitable to photogrammetrically map the nucleus, which form two stereopairs with an expected precision (EP) of ~410 m and ~670 m each. DS1 team members at the USGS and DLR have independently produced digital elevation models (DEMs) of Borrelly. Automatic stereo-matching algorithms were used by both USGS and DLR, but the USGS DEM was additionally manually edited in stereo. We accomplished a quantitative statistical comparison of the DEMs and found they have a standard deviation of 120 m, which is small compared to the EP above. There are systematic differences, we estimate the stereomatching error to only 0.20 pixel RMS, which is similar to the level of subpixel matching accuracy obtained in a wide variety of other mapping situations. The resulting DEMs enable a variety of applications such as perspective views, photometric modeling and studies of the energy balance of the nucleus. We hope to use the USGS DEM as a starting point to extrapolate the shape of the hidden side of the nucleus. This would not only let us determine the volume and moments of inertia of the nucleus, but would lead to a calculation of the insolation onto the nucleus averaged over an entire orbit, and thence to a model of the evolution of nuclear shape.

Conference Paper↗

USGS2002

USGS high resolution topo-mapping of Mars with Mars Orbiter Camera Narrow-Angle images

We describe our initial experiences producing controlled digital elevation models (DEMs) of Mars with horizontal resolutions of ≤10 m and vertical precisions of ≤2 m. Such models are of intense interest at all phases of Mars exploration and scientific investigation, from the selection of safe landing sites to the quantitative analysis of the morphologic record of surface processes. Topomapping with a resolution adequate to address many of these issues has only become possible with the success of the Mars Global Surveyor (MGS) mission. The Mars Orbiter Laser Altimeter (MOLA) on MGS mapped the planet globally with absolute accuracies <10 m vertically and ~100 m horizontally but relatively sparse sampling (300 m along track, with gaps of >1 km between tracks common at low latitudes). We rely on the MOLA data as the best available source of control and process images from the narrow-angle Mars Orbiter Camera (MOC-NA) with stereo and photoclinometric (shape-from-shading) techniques to produce DEMs with significantly better horizontal resolution. The techniques described here enable mapping not only with MOC but also with the high-resolution cameras (Mars Express HRSC, Mars Reconnaissance Orbiter HiRISE) that will orbit Mars in the next several years.

Conference Paper↗

USGS2001

Preliminary geological assessment of the Northern edge of Ultimi Lobe, Mars South Polar layered deposits

We have examined the local base of the south polar layered deposits (SPLD) exposed in the bounding scarp near 72°–74°S, 215°–230°W where there is a clear unconformable contact with older units. Sections of layering up to a kilometer thick were examined along the bounding scarp, permitting an estimate of the thinnest individual layers yet reported in the SPLD. Rhythmic layering is also present locally, suggesting a similarly rhythmic variation in environmental conditions and a recorded climate signal at least in some SPLD strata. Locally, angular unconformities may be present, as has been reported for the north polar layered deposits (NPLD) and may likewise imply intervals of subaerial erosion in the SPLD. The outcropping layers display a broad range of weathering styles and may reflect more diverse conditions of depositions, erosion, and diagenesis than might have been expected from simple aeolian depostion modulated only by astronomically driven climatic fluctuations. An unexpected finding of our study is the presence of locally abundant small pits close to the bounding scarp. These quasi-circular, negative, rimless features probably originated as impact craters and were modified to varying degrees by local endogenic processes, as well as locally variable blanketing. A nominal exposure age for the most heavily cratered region in our study area is about 2 million years, and the crater statistics appear consistent with those for the overall SPLD, although there are large uncertainties in the absolute ages implied by the crater size–frequency statistics, as in all martian crater ages. Another new finding is the presence of mass wasting features along the steepest portion of the retreating bounding scarp as well as a number of examples of brittle fracture, consistent with large-scale slumping along the bounding scarp and probably also ancient basal sliding. Both subhorizontal and high angle faults appear to be exposed in the bounding scarp, but the dips of the faults are poorly constrained. These fractures, along with the relatively undeformed layers between them, suggest to us that whatever horizontal motion may have taken place outward from the central cap region was accomplished by ancient basal sliding rather than large-scale glacial-like flow or ice migration by differential ablation, as proposed recently for the northern permanent cap and underlying NPLD. We have also obtained the first direct estimate of the regional dip of the SPLD, around 2–3° outward (northward) in one area.

Icarus↗

USGS1999

Digital mapping of the Mars Pathfinder landing site: Design, acquisition, and derivation of cartographic products for science applications

The Imager for Mars Pathfinder (IMP) acquired more than 16,000 images and provided panoramic views of the surface of Mars at the Mars Pathfinder landing site in Ares Vallis. This paper describes the stereoscopic, multispectral IMP imaging sequences and focuses on their use for digital mapping of the landing site and for deriving cartographic products to support science applications of these data. Two‐dimensional cartographic processing of IMP data, as performed via techniques and specialized software developed for ISIS (the U.S. Geological Survey image processing software package), is emphasized. Cartographic processing of IMP data includes ingestion, radiometric correction, establishment of geometric control, coregistration of multiple bands, reprojection, and mosaicking. Photogrammetric processing, an integral part of this cartographic work which utilizes the three‐dimensional character of the IMP data, supplements standard processing with geometric control and topographic information [ Kirk et al. , this issue]. Both cartographic and photogrammetric processing are required for producing seamless image mosaics and for coregistering the multispectral IMP data. Final, controlled IMP cartographic products include spectral cubes, panoramic (360° azimuthal coverage) and planimetric (top view) maps, and topographic data, to be archived on four CD‐ROM volumes. Uncontrolled and semicontrolled versions of these products were used to support geologic characterization of the landing site during the nominal and extended missions. Controlled products have allowed determination of the topography of the landing site and environs out to ∼60 m, and these data have been used to unravel the history of large‐ and small‐scale geologic processes which shaped the observed landing site. We conclude by summarizing several lessons learned from cartographic processing of IMP data.

Journal of Geophysical Research E: Planets↗

USGS1999

Preliminary results on photometric properties of materials at the Sagan Memorial Station, Mars

Reflectance measurements of selected rocks and soils over a wide range of illumination geometries obtained by the Imager for Mars Pathfinder (IMP) camera provide constraints on interpretations of the physical and mineralogical nature of geologic materials at the landing site. The data sets consist of (1) three small “photometric spot” subframed scenes, covering phase angles from 20° to 150°; (2) two image strips composed of three subframed images each, located along the antisunrise and antisunset lines (photometric equator), covering phase angles from ∼0° to 155°; and (3) full‐image scenes of the rock “Yogi,” covering phase angles from 48° to 100°. Phase functions extracted from calibrated data exhibit a dominantly backscattering photometric function, consistent with the results from the Viking lander cameras. However, forward scattering behavior does appear at phase angles >140°, particularly for the darker gray rock surfaces. Preliminary efforts using a Hapke scattering model are useful in comparing surface properties of different rock and soil types but are not well constrained, possibly due to the incomplete phase angle availability, uncertainties related to the photometric function of the calibration targets, and/or the competing effects of diffuse and direct lighting. Preliminary interpretations of the derived Hapke parameters suggest that (1) red rocks can be modeled as a mixture of gray rocks with a coating of bright and dark soil or dust, and (2) gray rocks have macroscopically smoother surfaces composed of microscopically homogeneous, clear materials with little internal scattering, which may imply a glass‐like or varnished surface.

Journal of Geophysical Research E: Planets↗

USGS1999

Overview of the Mars Pathfinder Mission: Launch through landing, surface operations, data sets, and science results

Mars Pathfinder successfully landed at Ares Vallis on July 4, 1997, deployed and navigated a small rover about 100 m clockwise around the lander, and collected data from three science instruments and ten technology experiments. The mission operated for three months and returned 2.3 Gbits of data, including over 16,500 lander and 550 rover images, 16 chemical analyses of rocks and soil, and 8.5 million individual temperature, pressure and wind measurements. Path‐finder is the best known location on Mars, having been clearly identified with respect to other features on the surface by correlating five prominent horizon features and two small craters in lander images with those in high‐resolution orbiter images and in inertial space from two‐way ranging and Doppler tracking. Tracking of the lander has fixed the spin pole of Mars, determined the precession rate since Viking 20 years ago, and indicates a polar moment of inertia, which constrains a central metallic core to be between 1300 and ∼2000 km in radius. Dark rocks appear to be high in silica and geochemically similar to anorogenic andesites; lighter rocks are richer in sulfur and lower in silica, consistent with being coated with various amounts of dust. Rover and lander images show rocks with a variety of morphologies, fabrics and textures, suggesting a variety of rock types are present. Rounded pebbles and cobbles on the surface as well as rounded bumps and pits on some rocks indicate these rocks may be conglomerates (although other explanations are also possible), which almost definitely require liquid water to form and a warmer and wetter past. Air‐borne dust is composed of composite silicate particles with a small fraction of a highly magnetic mineral, interpreted to be most likely maghemite; explanations suggest iron was dissolved from crustal materials during an active hydrologic cycle with maghemite freeze dried onto silicate dust grains. Remote sensing data at a scale of a kilometer or greater and an Earth analog correctly predicted a rocky plain safe for landing and roving with a variety of rocks deposited by catstrophic floods, which are relatively dust free. The surface appears to have changed little since it formed billions of years ago, with the exception that eolian activity may have deflated the surface by ∼3–7 cm, sculpted wind tails, collected sand into dunes, and eroded ventifacts (fluted and grooved rocks). Pathfinder found a dusty lower atmosphere, early morning water ice clouds, and morning near‐surface air temperatures that changed abruptly with time and height. Small scale vortices, interpreted to be dust devils, were observed repeatedly in the afternoon by the meteorology instruments and have been imaged.

Journal of Geophysical Research E: Planets↗

USGS1997

The imager for Mars Pathfinder experiment

The imager for Mars Pathfinder (IMP), a stereoscopic, multispectral camera, is described in terms of its capabilities for studying the Martian environment. The camera's two eyes, separated by 15.0 cm, provide the camera with range‐finding ability. Each eye illuminates half of a single CCD detector with a field of view of 14.4×14.0° and has 12 selectable filters. The ƒ/18 optics have a large depth of field, and no focussing mechanism is required; a mechanical shutter is avoided by using the frame transfer capability of the 512×512 CCD. The resolving power of the camera, 0.98 mrad/pixel, is approximately the same as the Viking Lander cameras; however, the signal‐to‐noise ratio for IMP greatly exceeds Viking, approaching 350. This feature along with the stable calibration of the filters between 440 and 1000 nm distinguishes IMP from Viking. Specially designed targets are positioned on the Lander; they provide information on the magnetic properties of wind‐blown dust, measure the wind vectors, and provide radiometric standard reflectors for calibration. Also, eight low‐transmission filters are included for imaging the Sun directly at multiple wavelengths, giving IMP the ability to measure dust opacity and potentially the water vapor content. Several experiments beyond the requisite color panorama are described in detail: contour mapping of the local terrain, multispectral imaging of the surrounding rock and soil to study local mineralogy, viewing of three wind socks, measuring atmospheric opacity and water vapor content, and estimating the magnetic properties of wind‐blown dust. This paper is intended to serve as a guide to understanding the scientific integrity of the IMP data that will be returned from Mars starting on July 4, 1997.

Journal of Geophysical Research E: Planets↗

USGS1997

Results from the Mars Pathfinder camera

Images of the martian surface returned by the Imager for Mars Pathfinder (IMP) show a complex surface of ridges and troughs covered by rocks that have been transported and modified by fluvial, aeolian, and impact processes. Analysis of the spectral signatures in the scene (at 440- to 1000-nanometer wavelength) reveal three types of rock and four classes of soil. Upward-looking IMP images of the predawn sky show thin, bluish clouds that probably represent water ice forming on local atmospheric haze (opacity ∼0.5). Haze particles are about 1 micrometer in radius and the water vapor column abundance is about 10 precipitable micrometers.

Science↗