Laura M. DeMott | Search USGS

USGS2026

Hydrogeology and water quality of the unconsolidated aquifer system in the lower Fall Creek valley, Tompkins County, New York

The U.S. Geological Survey, in cooperation with Tompkins County and the Town of Dryden, conducted a hydrogeologic investigation of the lower Fall Creek unconsolidated aquifer system in Tompkins County, New York. This study is part of an ongoing effort to characterize major valley-fill aquifers in the region to support sustainable groundwater management. The lower Fall Creek valley, encompassing the Village of Freeville, the unincorporated communities of Etna, and the hamlets of McLean and Varna, has experienced moderate development and relies heavily on groundwater for residential, agricultural, and commercial use. The study area spans approximately 51 square miles along the boundary of the Allegheny Plateau and North Rim of the Allegheny Plateau physiographic provinces. The aquifer system, composed primarily of glacially derived sand and gravel deposits, includes both unconfined and confined aquifer units. For the approximately 2,300 people who live over the aquifers, groundwater is the sole source of drinking water. In some areas, such as the Village of Freeville, artesian conditions exist, with potentiometric heads exceeding 25 feet above land surface. This report describes the hydrogeologic framework, aquifer distribution, groundwater-flow dynamics, and water quality of the lower Fall Creek aquifer system. Groundwater is generally hard and contains elevated concentrations of redox-sensitive constituents, such as iron and manganese relative to U.S. Environmental Protection Agency secondary maximum contaminant levels. Arsenic was not detected above the U.S. Environmental Protection Agency maximum contaminant level during this study but remains a regional concern due to past detections in the study area and nearby aquifers. The findings provide data for local planners and resource managers to use in understanding and protecting this water resource.

New York↗

USGS2026

Hydrogeology and water quality of the unconsolidated aquifer system in the Lower Fall Creek Valley, Tompkins County, New York

The U.S. Geological Survey, in cooperation with Tompkins County and the Town of Dryden, conducted a hydrogeologic investigation of the lower Fall Creek unconsolidated aquifer system in Tompkins County, New York. This study is part of an ongoing effort to characterize major valley-fill aquifers in the region to support sustainable groundwater management. The lower Fall Creek valley, encompassing the Village of Freeville, the unincorporated communities of Etna, and the hamlets of McLean and Varna, has experienced moderate development and relies heavily on groundwater for residential, agricultural, and commercial use. The study area spans approximately 51 square miles along the boundary of the Allegheny Plateau and North Rim of the Allegheny Plateau physiographic provinces. The aquifer system, composed primarily of glacially derived sand and gravel deposits, includes both unconfined and confined aquifer units. For the approximately 2,300 people who live over the aquifers, groundwater is the sole source of drinking water. In some areas, such as the Village of Freeville, artesian conditions exist, with potentiometric heads exceeding 25 feet above land surface. This report describes the hydrogeologic framework, aquifer distribution, groundwater-flow dynamics, and water quality of the lower Fall Creek aquifer system. Groundwater is generally hard and contains elevated concentrations of redox-sensitive constituents, such as iron and manganese relative to U.S. Environmental Protection Agency secondary maximum contaminant levels. Arsenic was not detected above the U.S. Environmental Protection Agency maximum contaminant level during this study but remains a regional concern due to past detections in the study area and nearby aquifers. The findings provide data for local planners and resource managers to use in understanding and protecting this water resource.

EarthArXiv↗

USGS2023

Bedrock-surface elevation and overburden thickness maps of the five boroughs, New York City, New York

Digital maps of bedrock elevation and overburden thickness (depth to bedrock) were constructed for the five boroughs of New York City by the U.S. Geological Survey, in cooperation with the New York City Department of Design and Construction, from a compilation of historical and newly acquired data. Raster surfaces were interpolated from a point database containing data from more than 14,000 locations collected from a variety of sources. These data were collected between 1905 and 2021. These maps were constructed to supplement existing tools for the evaluation of potential construction of geothermal heat pump technology for buildings in New York City. The bedrock underlying the study area ranges from easily weathered to very resistant to weathering. This differential susceptibility to erosion, along with numerous north-northwest-trending faults, is believed to control the shape of the bedrock surface. Glacial scouring of the bedrock during the Pleistocene Epoch is the most recent control on the topography of bedrock surfaces. Overburden thickness is an important consideration for evaluation and construction of geothermal systems. Bedrock-surface elevation ranges from about 360 feet above sea level (in central Staten Island and northern Bronx) to 1,200 feet below sea level (in southern Queens) (North American Vertical Datum of 1988). The overburden thickness ranges from 0 foot thick at surface outcrops on Staten Island, Manhattan, and the Bronx, to 1,280 feet thick in southeastern Queens.

Data Report↗

USGS2021

Methods of data collection and analysis for an assessment of karst aquifer systems between Albany and Buffalo, New York

The U.S. Geological Survey, in cooperation with the New York State Department of Environmental Conservation, catalogued aquifers and closed depressions in a karst-prone area between Albany and Buffalo, New York to provide resource managers information to more efficiently manage and protect groundwater resources. The New York State Department of Environmental Conservation has been working with the agricultural industry to raise awareness of karst aquifer contamination susceptibility and how to reduce effects on surface water and groundwater resources, especially in karst areas. There is also a need to make industries, State and local regulators, planners, and the public aware of New York’s karst resources to properly protect and manage these resources and the quality of surface water and groundwater that flows through the karst aquifer. Publicly available geospatial data were identified, collated, and analyzed for a region of karst terrain extending from Albany to Buffalo. The region was divided into 10 subareas. A series of geospatial datasets were assembled to determine the location and extent of karstic rock; bedrock geology and depth to bedrock; average water-table configuration; surficial geology; soil type, thickness, and hydraulic conductivity; land cover; and closed depressions in the land surface. Repeated glaciation and recession across New York have left the landscape pockmarked with closed depressions, which may or may not be related to the underlying bedrock. Closed depressions in areas where carbonate or evaporite karst are present are of primary concern to this study because of the increased potential of karst aquifer contamination from focused recharge. Closed depressions present in areas not associated with karst bedrock can also be evaluated to better understand their ability to transmit surface water to the groundwater system. Information on closed depressions can be used to develop land-management plans to protect local and regional water resources.

New York↗