Search USGS⌕ Search

Geology topics

Laszlo P. Keszthelyi

Publications and source records attributed to Laszlo P. Keszthelyi.

At least 55 records · Page 3Linked to original sources
USGS2010

New insight into lunar impact melt mobility from the LRO camera

The Lunar Reconnaissance Orbiter Camera (LROC) is systematically imaging impact melt deposits in and around lunar craters at meter and sub-meter scales. These images reveal that lunar impact melts, although morphologically similar to terrestrial lava flows of similar size, exhibit distinctive features (e.g., erosional channels). Although generated in a single rapid event, the post-impact mobility and morphology of lunar impact melts is surprisingly complex. We present evidence for multi-stage influx of impact melt into flow lobes and crater floor ponds. Our volume and cooling time estimates for the post-emplacement melt movements noted in LROC images suggest that new flows can emerge from melt ponds an extended time period after the impact event.

Geophysical Research Letters↗
USGS2010

The role of material properties in the cratering record of young platy-ridged lava on Mars

Platy‐ridged surfaces in the Elysium Planitia region of Mars exhibit different crater densities on rafted plates and polygonally patterned areas between them. Rather than being indicative of different ages, these differences provide insight into the variable strength of different types of lava surface. The sizes of small craters, and the resulting size‐frequency distribution (SFD), depend on the material strength of target surfaces. Brecciated lava surfaces are likely to have higher crater densities than coherent lava.

Geophysical Research Letters↗
USGS2010

Color imaging of Mars by the High Resolution Imaging Science Experiment (HiRISE)

HiRISE has been producing a large number of scientifically useful color products of Mars and other planetary objects. The three broad spectral bands, coupled with the highly sensitive 14 bit detectors and time delay integration, enable detection of subtle color differences. The very high spatial resolution of HiRISE can augment the mineralogic interpretations based on multispectral (THEMIS) and hyperspectral datasets (TES, OMEGA and CRISM) and thereby enable detailed geologic and stratigraphic interpretations at meter scales. In addition to providing some examples of color images and their interpretation, we describe the processing techniques used to produce them and note some of the minor artifacts in the output. We also provide an example of how HiRISE color products can be effectively used to expand mineral and lithologic mapping provided by CRISM data products that are backed by other spectral datasets. The utility of high quality color data for understanding geologic processes on Mars has been one of the major successes of HiRISE.

Icarus↗
USGS2010

The High Resolution Imaging Science Experiment (HiRISE) during MRO's Primary Science Phase (PSP)

The High Resolution Imaging Science Experiment (HiRISE) on the Mars Reconnaissance Orbiter (MRO) acquired 8 terapixels of data in 9137 images of Mars between October 2006 and December 2008, covering ∼0.55% of the surface. Images are typically 5–6 km wide with 3-color coverage over the central 20% of the swath, and their scales usually range from 25 to 60 cm/pixel. Nine hundred and sixty stereo pairs were acquired and more than 50 digital terrain models (DTMs) completed; these data have led to some of the most significant science results. New methods to measure and correct distortions due to pointing jitter facilitate topographic and change-detection studies at sub-meter scales. Recent results address Noachian bedrock stratigraphy, fluvially deposited fans in craters and in or near Valles Marineris, groundwater flow in fractures and porous media, quasi-periodic layering in polar and non-polar deposits, tectonic history of west Candor Chasma, geometry of clay-rich deposits near and within Mawrth Vallis, dynamics of flood lavas in the Cerberus Palus region, evidence for pyroclastic deposits, columnar jointing in lava flows, recent collapse pits, evidence for water in well-preserved impact craters, newly discovered large rayed craters, and glacial and periglacial processes. Of particular interest are ongoing processes such as those driven by the wind, impact cratering, avalanches of dust and/or frost, relatively bright deposits on steep gullied slopes, and the dynamic seasonal processes over polar regions. HiRISE has acquired hundreds of large images of past, present and potential future landing sites and has contributed to scientific and engineering studies of those sites. Warming the focal-plane electronics prior to imaging has mitigated an instrument anomaly that produces bad data under cold operating conditions.

Icarus↗
USGS2010

Aeolian bedforms, yardangs, and indurated surfaces in the Tharsis Montes as seen by the HiRISE Camera: Evidence for dust aggregates

HiRISE images of Mars with ground sampling down to 25 cm/pixel show that the dust-rich mantle covering the surfaces of the Tharsis Montes is organized into ridges whose form and distribution are consistent with formation by aeolian saltation. Other dusty areas near the volcanoes and elsewhere on the planet exhibit a similar morphology. The material composing these "reticulate" bedforms is constrained by their remote sensing properties and the threshold curve combined with the saltation/suspension boundary, both of which vary as a function of elevation (atmospheric pressure), particle size, and particle composition. Considering all of these factors, dust aggregates are the most likely material composing these bedforms. We propose that airfall dust on and near the volcanoes aggregates in situ over time, maybe due to electrostatic charging followed by cementation by salts. The aggregates eventually reach a particle size at which saltation is possible. Aggregates on the flanks are transported downslope by katabatic winds and form linear and "accordion" morphologies. Materials within the calderas and other depressions remain trapped and are subjected to multidirectional winds, forming an interlinked "honeycomb" texture. In many places on and near the volcanoes, light-toned, low thermal inertia yardangs and indurated surfaces are present. These may represent "duststone" formed when aggregates reach a particle size below the threshold curve, such that they become stabilized and subsequently undergo cementation.

Icarus↗
USGS2010

Hydrovolcanic features on Mars: Preliminary analysis of one Mars year of HiRISE observations

We provide an overview of features indicative of the interaction between water and lava and/or magma on Mars as seen by the High Resolution Imaging Science Experiment (HiRISE) camera during the Primary Science Phase of the Mars Reconnaissance Orbiter (MRO) mission. The ability to confidently resolve meter-scale features from orbit has been extremely useful in the study of the most pristine examples. In particular, HiRISE has allowed the documentation of previously undescribed features associated with phreatovolcanic cones (formed by the interaction of lava and groundwater) on rapidly emplaced flood lavas. These include "moats" and "wakes" that indicate that the lava crust was thin and mobile, respectively [Jaeger, W.L., Keszthelyi, L.P., McEwen, A.S., Dundas, C.M., Russel, P.S., 2007. Science 317, 1709-1711]. HiRISE has also discovered entablature-style jointing in lavas that is indicative of water-cooling [Milazzo, M.P., Keszthelyi, L.P., Jaeger, W.L., Rosiek, M., Mattson, S., Verba, C., Beyer, R.A., Geissler, P.E., McEwen, A.S., and the HiRISE Team, 2009. Geology 37, 171-174]. Other observations strongly support the idea of extensive volcanic mudflows (lahars). Evidence for other forms of hydrovolcanism, including glaciovolcanic interactions, is more equivocal. This is largely because most older and high-latitude terrains have been extensively modified, masking any earlier 1-10 m scale features. Much like terrestrial fieldwork, the prerequisite for making full use of HiRISE's capabilities is finding good outcrops.

Icarus↗
USGS2010

Emplacement of the youngest flood lava on Mars: A short, turbulent story

Recently acquired data from the High Resolution Imaging Science Experiment (HiRISE), Context (CTX) imager, and Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) onboard the Mars Reconnaissance Orbiter (MRO) spacecraft were used to investigate the emplacement of the youngest flood-lava flow on Mars. Careful mapping finds that the Athabasca Valles flood lava is the product of a single eruption, and it covers 250,000 km 2 of western Elysium Planitia with an estimated 5000-7500 km 3 of mafic or ultramafic lava. Calculations utilizing topographic data enhanced with MRO observations to refine the dimensions of the channel system show that this flood lava was emplaced turbulently over a period of only a few to several weeks. This is the first well-documented example of a turbulently emplaced flood lava anywhere in the Solar System. However, MRO data suggest that this same process may have operated in a number of martian channel systems. The magnitude and dynamics of these lava floods are similar to the aqueous floods that are generally believed to have eroded the channels, raising the intriguing possibility that mechanical erosion by lava could have played a role in their incision.

Icarus↗
USGS2010

Exploring the limits of identifying sub-pixel thermal features using ASTER TIR data

Understanding the characteristics of volcanic thermal emissions and how they change with time is important for forecasting and monitoring volcanic activity and potential hazards. Satellite instruments view volcanic thermal features across the globe at various temporal and spatial resolutions. Thermal features that may be a precursor to a major eruption, or indicative of important changes in an on-going eruption can be subtle, making them challenging to reliably identify with satellite instruments. The goal of this study was to explore the limits of the types and magnitudes of thermal anomalies that could be detected using satellite thermal infrared (TIR) data. Specifically, the characterization of sub-pixel thermal features with a wide range of temperatures is considered using ASTER multispectral TIR data. First, theoretical calculations were made to define a “thermal mixing detection threshold” for ASTER, which quantifies the limits of ASTER's ability to resolve sub-pixel thermal mixing over a range of hot target temperatures and % pixel areas. Then, ASTER TIR data were used to model sub-pixel thermal features at the Yellowstone National Park geothermal area (hot spring pools with temperatures from 40 to 90 °C) and at Mount Erebus Volcano, Antarctica (an active lava lake with temperatures from 200 to 800 °C). Finally, various sources of uncertainty in sub-pixel thermal calculations were quantified for these empirical measurements, including pixel resampling, atmospheric correction, and background temperature and emissivity assumptions.

Journal of Volcanology and Geothermal Research↗
USGS2010

The thermal signature of volcanic eruptions on Io and Earth,

We investigate a spectrum-based technique to identify the style of active volcanic eruptions on Jupiter's moon Io. Thermal remote sensing of Io has had to rely primarily on low-spatial-resolution data, similar to low-spatial-resolution satellite data applied to detecting and charting the temporal evolution of terrestrial hot spots. These terrestrial analyses use data from sensors designed to monitor the weather and sea surface temperature. On Io, such low-spatial-resolution data are used to classify eruption styles (modes of emplacement) by means of several criteria related to the temporal evolution of the infrared spectrum associated with the eruptive activity at each hot spot, which we term “thermal signature.” We find that the ratio of the emission at 2 and 5 µm, and how this ratio changes with time, is often diagnostic of eruption style, even in low-spatial-resolution data. Tests using thermal data for terrestrial “ground truth” cases show that our classification system is valid on Earth. The results of our analysis can be used to aid in the design of future space-based instruments that can be used for volcano monitoring on Io, as well as Earth.

Journal of Volcanology and Geothermal Research↗
USGS2009

Volcanic history, geologic analysis and map of the Prometheus Patera region on Io

Data from Jupiter's moon Io returned by the Galileo spacecraft have been used to create a geologic map of Prometheus Patera, its associated flow field, and nearby features. We have identified the location of the vent that fed the Prometheus flow field during the Galileo epoch in the north-eastern portion of the main Prometheus flow field. This vent is the probable source of a small sulphur-rich plume. Previous studies suggested that the vent may be atop a tectonic fault but we find that the vent is offset from the putative fault. It is plausible that, in the past, magma exploited the fault to reach the surface at Prometheus Patera, but subsequent magma cooling in the conduit could have caused an obstruction preventing further eruptions from providing significant contributions to the Prometheus flow field. We also speculate on how a new Prometheus plumbing system may be fed by mafic magmas after melt stalls in magma reservoirs during its ascent through the lithosphere from the mantle.

Journal of Volcanology and Geothermal Research↗
USGS2009

Floods of water and lava in the Columbia River Basin: Analogs for Mars

The Columbia River Basin (CRB) is home to the best studied examples of two of the most spectacular geologic processes on Earth and Mars: flood volcanism and catastrophic water floods. Additionally, features formed by a variety of eolian, glacial, tectonic, and mass-wasting processes can also be seen in the CRB. These terrains provide exceptional terrestrial analogs for the study of similar processes on Mars. This field guide describes four one-day trips out of Moses Lake, Washington, to observe a wide variety of Mars analogs.

Oregon, Washington↗
USGS2009

The discovery of columnar jointing on Mars

We report on the discovery of columnar jointing in Marte Valles, Mars. These columnar lavas were discovered in the wall of a pristine, 16-km-diameter impact crater and exhibit the features of terrestrial columnar basalts. There are discontinuous outcrops along the entire crater wall, suggesting that the columnar rocks covered a surface area of at least 200 km 2 , assuming that the rocks obliterated by the impact event were similarly jointed. We also see columns in the walls of other fresh craters in the nearby volcanic plains of Elysium Planitia–Amazonis Planitia, which include Marte Vallis, and in a well-preserved crater in northeast Hellas.

Geology↗
USGS2008

High Resolution Imaging Science Experiment (HiRISE) observations of glacial and periglacial morphologies in the circum-Argyre Planitia highlands, Mars

The landscape of the Argyre Planitia and adjoining Charitum and Nereidum Montes in the southern hemisphere of Mars has been heavily modified since formation of the Argyre impact basin. This study examines morphologies in the Argyre region revealed in images acquired by the High Resolution Imaging Science Experiment (HiRISE) camera and discusses the implications for glacial and periglacial processes. Distinctive features such as large grooves, semicircular embayments in high topography, and streamlined hills are interpreted as glacially eroded grooves, cirques, and whalebacks or roche moutonnée, respectively. Large boulders scattered across the floor of a valley may be ground moraine deposited by ice ablation. Glacial interpretations are supported by the association of these features with other landforms typical of glaciated landscapes such as broad valleys with parabolic cross sections and stepped longitudinal profiles, lobate debris aprons interpreted as remnant debris covered glaciers or rock glaciers, and possible hanging valleys. Aligned boulders observed on slopes may also indicate glacial processes such as fluting. Alternatively, boulders aligned on slopes and organized in clumps and polygonal patterns on flatter surfaces may indicate periglacial processes, perhaps postglaciation, that form patterned ground. At least portions of the Argyre region appear to have been modified by processes of ice accumulation, glacial flow, erosion, sediment deposition, ice stagnation and ablation, and perhaps subsequent periglacial processes. The type of bedrock erosion apparent in images suggests that glaciers were, at times, wet based. The number of superposed craters is consistent with geologically recent glacial activity, but may be due to subsequent modification.

Journal of Geophysical Research E: Planets↗
USGS2008

Ultrahigh resolution topographic mapping of Mars with MRO HiRISE stereo images: Meter-scale slopes of candidate Phoenix landing sites

The objectives of this paper are twofold: first, to report our estimates of the meter‐to‐decameter‐scale topography and slopes of candidate landing sites for the Phoenix mission, based on analysis of Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) images with a typical pixel scale of 3 m and Mars Reconnaissance Orbiter (MRO) High Resolution Imaging Science Experiment (HiRISE) images at 0.3 m pixel −1 and, second, to document in detail the geometric calibration, software, and procedures on which the photogrammetric analysis of HiRISE data is based. A combination of optical design modeling, laboratory observations, star images, and Mars images form the basis for software in the U.S. Geological Survey Integrated Software for Imagers and Spectrometers (ISIS) 3 system that corrects the images for a variety of distortions with single‐pixel or subpixel accuracy. Corrected images are analyzed in the commercial photogrammetric software SOCET SET (® BAE Systems), yielding digital topographic models (DTMs) with a grid spacing of 1 m (3–4 pixels) that require minimal interactive editing. Photoclinometry yields DTMs with single‐pixel grid spacing. Slopes from MOC and HiRISE are comparable throughout the latitude zone of interest and compare favorably with those where past missions have landed successfully; only the Mars Exploration Rover (MER) B site in Meridiani Planum is smoother. MOC results at multiple locations have root‐mean‐square (RMS) bidirectional slopes of 0.8–4.5° at baselines of 3–10 m. HiRISE stereopairs (one per final candidate site and one in the former site) yield 1.8–2.8° slopes at 1‐m baseline. Slopes at 1 m from photoclinometry are also in the range 2–3° after correction for image blur. Slopes exceeding the 16° Phoenix safety limit are extremely rare.

Journal of Geophysical Research E: Planets↗
USGS2008

Surface processes recorded by rocks and soils on Meridiani Planum, Mars: Microscopic Imager observations during Opportunity's first three extended missions

The Microscopic Imager (MI) on the Mars Exploration Rover Opportunity has returned images of Mars with higher resolution than any previous camera system, allowing detailed petrographic and sedimentological studies of the rocks and soils at the Meridiani Planum landing site. Designed to simulate a geologist's hand lens, the MI is mounted on Opportunity's instrument arm and can resolve objects 0.1 mm across or larger. This paper provides an overview of MI operations, data calibration, and analysis of MI data returned during the first 900 sols (Mars days) of the Opportunity landed mission. Analyses of Opportunity MI data have helped to resolve major questions about the origin of observed textures and features. These studies support eolian sediment transport, rather than impact surge processes, as the dominant depositional mechanism for Burns formation strata. MI stereo observations of a rock outcrop near the rim of Erebus Crater support the previous interpretation of similar sedimentary structures in Eagle Crater as being formed by surficial flow of liquid water. Well‐sorted spherules dominate ripple surfaces on the Meridiani plains, and the size of spherules between ripples decreases by about 1 mm from north to south along Opportunity's traverse between Endurance and Erebus craters.

Journal of Geophysical Research E: Planets↗
USGS2008

High resolution imaging science experiment (HiRISE) images of volcanic terrains from the first 6 months of the Mars reconnaissance orbiter primary science phase

In the first 6 months of the Mars Reconnaissance Orbiter's Primary Science Phase, the High Resolution Imaging Science Experiment (HiRISE) camera has returned images sampling the diversity of volcanic terrains on Mars. While many of these features were noted in earlier imaging, they are now seen with unprecedented clarity. We find that some volcanic vents produced predominantly effusive products while others generated mostly pyroclastics. Flood lavas were emplaced in both turbulent and gentle eruptions, producing roofed channels and inflation features. However, many areas on Mars are too heavily mantled to allow meter-scale volcanic features to be discerned. In particular, the major volcanic edifices are extensively mantled, though it is possible that some of the mantle is pyroclastic material rather than atmospheric dust. Support imaging by the Context Imager (CTX) and topographic information derived from stereo imaging are both invaluable in interpreting the HiRISE data.

Journal of Geophysical Research E: Planets↗