Search USGS⌕ Search

Geology topics

L.L. Knobel

Publications and source records attributed to L.L. Knobel.

27 records · Page 2Linked to original sources

Mineralogy and grain size of surficial sediment from the Big Lost River drainage and vicinity, with chemical and physical characteristics of geologic materials from selected sites at the Idaho National Engineering Laboratory, Idaho

The U.S. Geological Survey 's Idaho National Engineering Laboratory project office, in cooperation with the U.S. Department of Energy, collected 35 samples of surficial sediments from the Big Lost River drainage and vicinity from July 1987 through August 1988 for analysis of grain-size distribution, bulk mineralogy, and clay mineralogy. Samples were collected from 11 sites in the channel and 5 sites in overbank deposits of the Big Lost River, 6 sites in the spreading areas that receive excess flow from the Big Lost River during peak flow conditions, 7 sites in the natural sinks and playas of the Big Lost River, 1 site in the Little Lost River Sink, and 5 sites from other small, isolated closed basins. Eleven samples from the Big Lost River channel deposits had a mean of 1.9 and median of 0.8 weight percent in the less than 0.062 mm fraction. The other 24 samples had a mean of 63.3 and median of 63.7 weight percent for the same size fraction. Mineralogy data are consistent with grain-size data. The Big Lost River channel deposits had mean and median percent mineral abundances of total clays and detrital mica of 10 and 10%, respectively, whereas the remaining 24 samples had mean and median values of 24% and 22.5% , respectively. (USGS)

Open-File Report↗

Mineralogy and grain size of surficial sediment from the Little Lost River and Birch Creek drainages, Idaho National Engineering Laboratory, Idaho

The U.S. Geological Survey 's Idaho National Engineering Laboratory project office, in cooperation with the U.S. Department of Energy, collected 13 samples of surficial sediments from the Little Lost River and Birch Creek drainages during August 1988 for analysis of grain-size distribution, bulk mineralogy, and clay mineralogy. Samples were collected from five sites in the channel of the Little Lost River, two sites from overbank deposits of the Little Lost River, five sites in the channel of Birch Creek, and one site from an overbank deposit of Birch Creek. Six samples from the Birch Creek channel and overbank deposits had a mean of 7.9 and median of 2.5 weight percent in the less than 0.062 mm fraction. The seven samples from the Little Lost River channel and overbank deposits had a mean of 34.5 and median of 23.8 weight percent for the same size fraction. Mineralogy data indicated that Birch Creek had larger mean percentages of quartz and calcite, and smaller mean percentages of total feldspar and dolomite than the Little Lost River deposits. Illite was the dominant clay mineral present in both drainages, but the Little Lost River deposits contained more smectite, mixed-layer clays, and kaolinite than the Birth Creek deposits. (USGS)

Open-File Report↗

Evaluation of field sampling and preservation methods for strontium-90 in ground water at the Idaho National Engineering Laboratory, Idaho

Water from four wells completed in the Snake River Plain aquifer was sampled as part of the U.S. Geological Survey 's quality assurance program to evaluate the effect of filtration and preservation methods on strontium-90 concentrations in groundwater at the Idaho National Engineering Laboratory. Water from each well was filtered through either a 0.45-micrometer membrane or a 0.1-micrometer membrane filter; unfiltered samples also were collected. Two sets of filtered and two sets of unfiltered samples was preserved in the field with reagent-grade hydrochloric acid and the other set of samples was not acidified. For water from wells with strontium-90 concentrations at or above the reporting level, 94% or more of the strontium-90 is in true solution or in colloidal particles smaller than 0.1 micrometer. These results suggest that within-laboratory reproducibility for strontium-90 in groundwater at the INEL is not significantly affected by changes in filtration and preservation methods used for sample collections. (USGS)

Water-Resources Investigations Report↗

Ground-water quality data for the Atlantic Coastal Plain: New Jersey, Delaware, Maryland, Virginia, and North Carolina

This report is a compilation of chemical analyses of ground-water samples in the Atlantic Coastal Plain from North Carolina through New Jersey. It contains records of 3,616 chemical analyses of ground water selected from more than 15,000 analyses in WATSTORE. These analyses serve as the data base for interpreting the geochemistry of the northern Atlantic Coastal Plain aquifer system. Reported chemical data include common anions and cations, selected trace metals, and selected physical characteristics.

Delaware, Maryland, North Carolina, New Jersey, Vi↗

Test well DO-CE 88 at Cambridge, Dorchester County, Maryland

Test well DO-CE 88 at Cambridge, Maryland, penetrated 3,299 feet of unconsolidated Quaternary, Tertiary and Cretaceous sediments and bottomed in quartz-monzonite gneiss. The well was drilled to provide data for a study of the aquifer system of the northern Atlantic Coastal Plain. Twenty-one core samples were collected. Six sand zones were tested for aquifer properties and sampled for ground-water chemistry. Point-water heads were measured at seven depths. Environmental heads (which ranged from -18.33 to +44.16 feet relative to sea level) indicate an upward component of flow. A temperature log showed a maximum temperature of 41.9 degrees Celsius and a mean temperature gradient of 0.00838 degrees Celsius per foot. The water analyses delineated the freshwater-saltwater transition zone between 2,650 and 3,100 feet. The ground water changes progressively downward from a sodium bicarbonate to a sodium chloride character. Clays in the analyzed core samples belong to the montmorillonite and kaolinite groups, and mean cation exchange capacity ranged from 8.3 to 38.9 milliequivalents per 100 grams. Vertical and horizontal hydraulic conductivities measured in cores ranged from 1.5 x 10-s to 1.3 feet per day and from 7.3 x 10-6 to 1.3 feet per day, respectively, but the most permeable sands were not cored. Porosity was 1.5 percent in the quartz monzonite bedrock and ranged from 22.4 to 41 percent in the overlying sediments. Transmissivities from aquifer tests ranged from 25 to 850 feet squared per day, horizontal hydraulic conductivities ranged from 2.5 to 85 feet squared per day, and intrinsic permeabilities ranged from 0.8 to 23 micrometers squared. Fossils identified in core samples include palynomorphs, dinoflagellates, and foraminifers.

Maryland↗